In-situ hydrogenolysis of glycerol using hydrogen produced via aqueous phase reforming of glycerol over sonochemically synthesized nickel-based nano-catalyst

Production of 1,3-propanediol via in situ glycerol hydrogenolysis in aqueous phase reforming using bimetallic W-Ni/CeO2

The production of 1,3-propanediol via in situ glycerol hydrogenolysis and aqueous phase reforming is a promising technique to ensure high product yield with shorter reaction times and lower costs, as demonstrated in this study by investigating the effect of tungsten (W) doping on Ni/CeO2 catalysts. Physicochemical properties of catalyst were determined using XRD, H2-TPR, NH3-TPD, BET, and FESEM-EDX techniques, and the catalytic performance was investigated at 230 °C, 20 bar, and 5 wt.% glycerol in an autoclave batch reactor. W doping ranging from 1-7% improved the catalyst's performance, with 3% W in 10% Ni/CeO₂ (3W10NC) achieving the highest yield (2.4%), selectivity (33.3%), and a good conversion rate (72.18%). The effect of reaction parameter on the 3W10NC catalyst showed that increasing pressure and temperature from the initial parameters had a detrimental effect on 1,3-propanediol attributed to the phenomenon called over-hydrogenolysis. Increasing the glycerol concentration to 20 wt.% also had a positive effect, resulting in the highest 1,3-propanediol yield of 22.27%. The effect of reaction time study revealed that the yield of 1,3-propanediol continued to increase steadily, reaching 38.29% after 4 h of reaction under the optimal conditions of 230 °C, 20 bar, and 20 wt.% glycerol. The kinetic study confirmed that the reaction follows first-order reaction with activation energy of 20.104 kJ mol-1. The catalyst reusability test revealed a decrease in the yield of 1,3-propanediol to 32.55%, likely due to deactivation caused by sintering and leaching, as indicated by the FESEM micrograph, EDX spectra, and NH3-TPD.

Valorization and Repurposing of Citrus limetta Fruit Waste for Fabrication of Multifunctional AgNPs and Their Diverse Nanomedicinal Applications

Herein we propose an ecofriendly process for the biofabrication of AgNPs by applying fruit waste of Citrus limetta. The aqueous extracts from the peels of the fruit were used as green chelating and stabilizing agents. Structural, optical, vibrational, morphological, and magnetic properties were established using UV-Vis (ultraviolet visible spectroscopy), XRD (X-rays diffraction), FTIR (Fourier transformed infrared spectroscopy), EDS (energy dispersive spectroscopy), SEM (scanning electron microscopy), ESR (electron spin resonance), and PPMS (physical property management system), while the thermal properties were established using TGA/DTG (thermal gravimetric analysis/derivative thermogravimetry). XRD pattern revealed intense peaks with single-phase purity, while the Debye-Scherrer approximation revealed an average crystallite size of 33.18 nm. The W-H plot revealed the size of 55.2 nm and strain 2.68 × 10-4. FTIR spectra revealed the involvement of different functional groups and major IR vibrations were observed at 2329 cm-1, 2092 cm-1, 1794 cm-1, 1268 cm-1, and 754 cm-1. TGA/DTG revealed major weight loss events at 240 °C and 360 °C. SEM revealed spherical or quasi-spherical morphology, while EDS confirmed the presence of elemental silver. The M-H behavior for all measurement temperature shows diamagnetic behavior. Electron spin resonance (ESR) revealed a high proportion of free electrons. Furthermore, the pharmacognostic and nanomedicinal potential CL-AgNPs was established using multiple in vitro and in vivo bioassays. The in vivo wound healing assays in mice revealed excellent healing potential which were similar to positive control. The percent wound healing is reported to be 93% on the 14th day of incision after application of CL-AgNPs. Bioassays were performed to assess enzyme inhibition potential of the CL-AgNPs for Alzheimer disease and antidiabetic applications. The AChE and BChE potential of the CL-AgNPs was highest at 1000 µg mL-1, i.e., 92% and 56%, respectively. The α-glucosidase inhibition potential for the CL-AgNPs was higher as compared to the α-glucosidase, while the DPPH free radical scavenging was reported to be 70% to 11% at varying concentrations between 1000 and 62.5 µg mL-1. Overall, our results indicate that the waste fruit peels can be a sustainable and eco-friendly resource of synthesis of the multifunctional nanoparticles.

The influence of nano filter elements on pressure drop and pollutant elimination efficiency in town border stations

Natural gas stands as the most ecologically sustainable fossil fuel, constituting nearly 25% of worldwide primary energy utilization and experiencing rapid expansion. This article offers an extensive comparative analysis of nano filter elements, focusing on pressure drop and pollutant removal efficiency. The primary goal was to assess the superior performance of nano filter elements and their suitability as an alternative for Town Border Station (TBS). The research encompassed a six-month examination period, involving routine pressure assessments, structural examinations, and particle characterization of the filter elements. The results revealed that nano filters showed better performance in adsorbing aluminum than conventional filters, possibly due to their cartridge composition. Nano filters contained phosphorus, sulfur, and copper, while conventional filters lacked these elements. The disparity can be attributed to the finer mesh of the nano filter, capturing smaller pollutants. Although the nano filter had minimal silicon, the conventional filter showed some, posing concerns. Despite having 19 extra pleats, the nano filter maintained gas flow pressure while capturing more particles than the conventional filter.

Production of Propanediols through In Situ Glycerol Hydrogenolysis via Aqueous Phase Reforming: A Review

Production of 1,2-propanediol and 1,3-propanediol are identified as methods to reduce glycerol oversupply. Hence, glycerol hydrogenolysis is identified as a thermochemical conversion substitute; however, it requires an expensive, high-pressure pure hydrogen supply. Studies have been performed on other potential thermochemical conversion processes whereby aqueous phase reforming has been identified as an excellent substitute for the conversion process due to its low temperature requirement and high H2 yields, factors which permit the process of in-situ glycerol hydrogenolysis which requires no external H2 supply. Hence, this manuscript emphasizes delving into the possibilities of this concept to produce 1,2-propanediol and 1,3-propanediol without “breaking the bank” with expenses. Various heterogenous catalysts of aqueous phase reforming (APR) and glycerol hydrogenolysis were identified, whereby the combination of a noble metal, support, and dopant with a good amount of Brønsted acid sites are identified as the key factors to ensure a high yield of 1,3-propanediol. However, for 1,2-propanediol, a Cu-based catalyst with decent basic support is observed to be the key for good yield and selectivity of product. The findings have shown that it is possible to produce high yields of both 1,2-propanediol and 1,3-propanediol via aqueous phase reforming, specifically 1,2-propanediol, for which some of the findings achieve better selectivity compared to direct glycerol hydrogenolysis to 1,2-propanediol. This is not the case for 1,3-propanediol, for which further studies need to be conducted to evaluate its feasibility.

Catalytic Conversion of Glycerol into Hydrogen and Value-Added Chemicals: Recent Research Advances

In recent decades, the use of biomass as alternative resources to produce renewable and sustainable biofuels such as biodiesel has gained attention given the situation of the progressive exhaustion of easily accessible fossil fuels, increasing environmental concerns, and a dramatically growing global population. The conventional transesterification of edible, nonedible, or waste cooking oils to produce biodiesel is always accompanied by the formation of glycerol as the by-product. Undeniably, it is essential to economically use this by-product to produce a range of valuable fuels and chemicals to ensure the sustainability of the transesterification process. Therefore, recently, glycerol has been used as a feedstock for the production of value-added H2 and chemicals. In this review, the recent advances in the catalytic conversion of glycerol to H2 and high-value chemicals are thoroughly discussed. Specifically, the activity, stability, and recyclability of the catalysts used in the steam reforming of glycerol for H2 production are covered. In addition, the behavior and performance of heterogeneous catalysts in terms of the roles of active metal and support toward the formation of acrolein, lactic acid, 1,3-propanediol, and 1,2-propanediol from glycerol are reviewed. Recommendations for future research and main conclusions are provided. Overall, this review offers guidance and directions for the sufficient and economical utilization of glycerol to generate fuels and high value chemicals, which will ultimately benefit industry, environment, and economy.