Effect of a 10-day ageing at 30°C on the texture of dry-cured hams processed at temperatures up to 18°C in relation to raw meat pH and salting time

Insight into the Relationship between the Causes of Off-Odour and Microorganism Communities in Xuanwei Ham

To expound on the correlation between the microorganism communities and the formation of off-odour in Xuanwei ham, the microorganism communities and volatile compounds were investigated in the biceps femoris (BF) and semimembranosus (SM) of Xuanwei ham with different quality grades (normal ham and spoiled ham). The single molecule real-time sequencing showed that differential bacteria and fungi were more varied in normal hams than in spoiled hams. Headspace solid-phase microextraction-gas chromatography (HS-SPME-GC-MS) results indicated that aldehydes and alcohols were significantly higher in spoiled hams than those in normal hams (p < 0.05). The off-odour of spoiled hams was dominated by ichthyic, malodourous, sweaty, putrid, sour, and unpleasant odours produced by compounds such as trimethylamine (SM: 13.05 μg/kg), hexanal (BF: 206.46 μg/kg), octanal (BF: 59.52 μg/kg), methanethiol (SM: 12.85 μg/kg), and valeric acid (BF: 15.08 μg/kg), which are positively correlated with Bacillus cereus, Bacillus subtilis, Bacillus licheniformis, Pseudomonas sp., Aspergillus ruber, and Moraxella osloensis. Furthermore, the physicochemical property and quality characteristics results showed that high moisture (BF: 56.32 g/100 g), pH (BF: 6.63), thiobarbituric acid reactive substances (TBARS) (SM: 1.98 MDA/kg), and low NaCl content (SM: 6.31%) were also responsible for the spoilage of hams with off-odour. This study provided a deep insight into the off-odour of Xuanwei ham from the perspective of microorganism communities and a theoretical basis for improving the flavour and overall quality of Xuanwei hams.

Monitoring physicochemical modifications in beef steaks during dry salting using contact and non-contact ultrasonic techniques

In conventional ultrasonic techniques, the necessary contact between the sensor and the product has constrained the implementation of ultrasound for quality control purposes in the meat industry. The use of novel air-coupled ultrasonic technologies provides multiple advantages linked to contactless inspection. Therefore, this study aims to compare the feasibility of contact (C; 1 MHz) and non-contact (NC; 0.3 MHz) ultrasonic techniques for monitoring the physicochemical modifications undergone by beef steaks during dry salting after different times (0, 1, 4, 8 and 24 hours). Experimental results showed that the ultrasonic velocity increased during salting, which was linked to the reduction in Time-of-Flight ratio (RTOF) and sample shrinkage (velocity C: R2 = 0.99; velocity NC: R2 = 0.93 and RTOF C: R2 = 0.98; RTOF NC: R2 = 0.95). In terms of the compositional changes provoked by salting, the velocity variation (△V) increased linearly (C: R2 = 0.97; NC: R2 = 0.95) with the salt content. As for textural parameters, hardness (C: R2 = 0.99; NC: R2 = 0.97) and relaxation capacity (C: R2 = 0.96; NC: R2 = 0.94) were well correlated with the △V through power equations. Experimental results reflected that the performance of the non-contact ultrasonic technique was similar to that of the contact technique as regards the monitoring of the physicochemical changes undergone by beef steaks during dry salting.

Characterization of Quality Properties in Spoiled Mianning Ham

Deep spoilage is a cyclical and costly problem for the meat industry. Mianning ham is a famous dry-cured meat product in Sichuan, China. The aim of this work was to investigate the physicochemical characteristics, sources of odor, and associated microorganisms that cause spoilage of Mianning ham. High-throughput sequencing and solid-phase microextraction–gas-chromatography (SPME-GC-MS) techniques were used to characterize the physicochemical properties, microbial community structure, and volatile compounds of spoiled Mianning ham and to compare it with normal Mianning ham. The results showed that spoiled ham typically had higher moisture content, water activity (a_w), and pH, and lower salt content. The dominant bacterial phylum detected in deeply spoiled ham was Firmicutes (95.4%). The dominant bacterial genus was Clostridium_sensu_stricto_2 (92.01%), the dominant fungal phylum was Ascomycota (98.48%), and the dominant fungal genus was Aspergillus (84.27%). A total of 57 volatile flavor substances were detected in deeply spoiled ham, including 11 aldehydes, 2 ketones, 6 alcohols, 10 esters, 20 hydrocarbons, 6 acids, and 2 other compounds. Hexanal (279.607 ± 127.265 μg/kg) was the most abundant in deeply spoiled ham, followed by Butanoic acid (266.885 ± 55.439 μg/kg) and Nonanal (165.079 ± 63.923 μg/kg). Clostridium_sensu_stricto_2 promoted the formation of five main flavor compounds, Heptanal, (E)-2-Octenal, 2-Nonanone, Hexanal, and Nonanal, in deeply spoiled ham by correlation analysis of microbial and volatile flavor substances.

A comprehensive review on molecular mechanism of defective dry-cured ham with excessive pastiness, adhesiveness, and bitterness by proteomics insights

Excessive bitterness, pastiness, and adhesiveness are the main organoleptic and textural defects of dry-cured ham, which often cause a lot of financial losses to manufacturers and seriously damage the quality of the product. These sensory and textural defects are related to the protein degradation of dry-cured ham. Proteomics shows great potential to improve our understanding of the molecular mechanism of sensory and textural defects and identify biomarkers for monitoring their quality traits. This review presents some of the major achievements and considerations in organoleptic and textural defects of dry-cured ham by proteomics analysis in the recent decades and gives an overview about how to correct sensory and textural defects of dry-cured ham. Proteomics reveals that muscle proteins derived from myofibril and cytoskeleton and involved in metabolic enzymes and oxygen transport have been identified as potential biomarkers in defective dry-cured ham. Relatively high residual activities of cathepsin B and L are responsible for the excessive degradation of these protein biomarkers in defective dry-cured ham. Ultrasound-assisted mild thermal or high-pressure treatment shows a good correction for the organoleptic and textural defects of dry-cured ham by changing microstructure and conformation of muscle proteins by accelerating degradation of proteins and polypeptides into free amino acids.

Flavor Composition and Microbial Community Structure of Mianning Ham

Mianning ham, a traditional Chinese dry-cured ham, is protected by national geographical indications. To understand the surface and internal flavor composition and microbial community structure of Mianning ham, solid phase microextraction-gas chromatography (SPME-GC-MS) technology and Illumina high-throughput sequencing were utilized. The results showed that a total of 60 flavor substances were identified in the hams. Forty-nine kinds of flavorings were identified on the surface, including 14 aldehydes, 6 ketones, 10 alcohols, 5 esters, 7 hydrocarbons, 5 acids, and 2 other compounds. Thirty-six kinds of internal flavorings were identified, including 13 aldehydes, 4 ketones, 6 alcohols, 3 esters, 5 hydrocarbons, 4 acids and 1 other type. Decanal (34.91 μg/g) was the most prevalent compound on the surface, followed by n-hexanol (24.99 μg/g), n-hexanal (20.20 μg/g), and n-octyl (16.14 μg/g). n-Hexanal (20.74 μg/g) was the most common compound internally, followed by non-aldehyde (5.70 μg/g), 1-octene-3-alcohol (3.54 μg/g), and inverse-2-octenal (2.77 μg/g). Penicillium lanosum, Penicillium nalgiovense, Debaryomyces hansenii, Staphylococcus equorum, and Erwinia tasmaniensis were isolated from the surfaces of the hams by the traditional culture method. By Illumina high-throughput sequencing, three fungal phyla were identified. Ascomycota was the dominant phylum followed by Basidiomycota. At the genus level, 11 fungi were identified, of which Aspergillus was the dominant fungus, followed by Penicillium and Wallemia. These findings provide fundamental knowledge regarding the microorganisms and flavor compounds in Mianning ham, which will help industrial processors develop effective strategies for standardizing quality parameters.

Processing parameters involved in the development of texture and tyrosine precipitates in dry-cured ham: Modelisation of texture development

The aim of this study was to quantify the effects of different processing parameters on texture development and the incidence of white film and tyrosine crystals in dry-cured ham. Hams were dry-salted for 0.65, 0.8 or 1.0 days/kg. After drying for 45 days at 5 °C, they were dried at 10, 15 or 20 °C until reaching 33% weight loss and, thereafter, dried at 25 °C until reaching 36 or 40% weight loss. The salting time, drying temperature and target weight loss significantly affected the texture and incidence of white film and tyrosine crystals. A beneficial effect of drying at 20 °C on texture was found, which was especially important for low target weight loss (33%). Besides, hams dried at 20 °C and those with 40% weight loss showed higher incidence of tyrosine crystals. Contour plots and predictive models for texture can be used to define optimal processing parameters.

Application of temperature and ultrasound as corrective measures to decrease the adhesiveness in dry-cured ham. Influence on free amino acid and volatile compound profile

The impact of low temperature treatment and its combination with ultrasound has been evaluated in order to correct texture defects in dry-cured hams. A total of 26 dry-cured hams, classified as high proteolysis index (PI>36%), were used. From these hams, ten slices from each ham sample were cut, vacuum packed and submitted to three different treatments: control (without treatment), conventional thermal treatments (CV) and thermal treatment assisted by power ultrasound (US). The impact of these treatments on instrumental adhesiveness, free amino acid and volatile compounds profile were assessed. Statistical analysis showed that both US and CV treatments, significantly (P < .001) decreased the instrumental adhesiveness of dry-cured hams from 85.27 g for CO to 40.59 and 38.68 g for US and CV groups, respectively. The total free amino acid content was significantly (P < .001) affected by both treatments, presenting higher values the samples from the US group (6691.5 vs. 6067.5 vs. 5278.2 mg/100 g dry matter for US, CV and CO groups, respectively). No significant differences were observed between US and CV treatments. All the individual free amino acids were influenced by ultrasound and temperature treatments, showing the highest content in sliced dry-cured ham submitted to ultrasounds at 50 °C, except for isoleucine which presented the highest level in samples from CV group. Similarly, significant differences (P < .05) were also detected in the total volatile compound content between CO and US groups, with a higher concentration in the CO batch (56,662.84 AU × 10³/g of dry-cured ham) than in the US treatment (45,848.47 AU × 10³/g of dry-cured ham), being the values in the CV treatment intermediate (48,497.25 AU × 10³/g of dry-cured ham). Aldehydes, ethers and esters, carboxylic acids and sulphur compounds were more abundant in the CO group, while CV group showed higher concentrations of ketones, alcohols and nitrogen compounds.

Intensification of heat transfer during mild thermal treatment of dry-cured ham by using airborne ultrasound

The application of power ultrasound (PuS) could be used as a novel technology with which to intensify thermal treatments using hot air. Mild thermal treatments have been applied to improve the soft texture of dry-cured ham caused by defective processing. In this regard, the aim of this study was to assess the kinetic intensification linked to the application of airborne PuS in the mild thermal treatment using hot air of dry-cured ham. For this purpose, vacuum packed cylindrical samples (2.52±0.11cm in diameter and 1.90±0.14cm in height) of dry-cured ham were heated using hot air at different temperatures (40, 45, 50°C) and air velocities (1, 2, 3, 4, 6m/s) with (22.3kHz, 50W) and without PuS application. Heat transfer was analyzed by considering that it was entirely controlled by conduction and the apparent thermal diffusivity was identified by fitting the model to the heating kinetics. The obtained results revealed that PuS application sped up the heat transfer, showing an increase in the apparent thermal diffusivity (up to 37%). The improvement in the apparent thermal diffusivity produced by PuS application was greater at high temperatures (50°C) but negligible at high air velocities (6m/s). Heating caused an increase in the hardness and elasticity of dry-cured ham, which would correct ham pastiness defects, while the influence of PuS on such textural parameters was negligible.

Recent advances in cured raw ham manufacture

Cured raw hams are a valuable and popular group of meat products. The consumption and international trade have increased during the last years, therefore new technologies to accelerate the production process and to increase product quality and safety are needed. In the current review, an overview of European protected cured raw hams is presented. Furthermore, traditional methods for cured raw ham production together with recent advantages in the techniques for pretreatment (trimming, blade tenderization, and freeze-thawing), curing/salting (tumbling, vacuum impregnation, pulsed pressure, ultrasound, pulsed electric fields, simultaneous thawing/salting), drying/ripening (Quick-Dry-Slice-process, oil drop application, high temperature short time process) and postprocessing (vacuum and modified atmosphere packaging, high hydrostatic pressure, high pressure carbon dioxide, high pressure carbon dioxide with ultrasound) are described. Moreover, application techniques and effects of protective cultures and starter cultures, such as molds, yeasts, coagulase-negative staphylococci and lactic acid bacteria, on cured raw ham quality and safety are reviewed.

Quantitative study of the relationships among proteolysis, lipid oxidation, structure and texture throughout the dry-cured ham process

Temperature, salt and water contents are key processing factors in dry-cured ham production. They affect how proteolysis, lipid oxidation, structure and texture evolve, and thus determine the sensory properties and final quality of dry-cured ham. The aim of this study was to quantify the interrelationships and the time course of (i) proteolysis, (ii) lipid oxidation, (iii) five textural parameters: hardness, fragility, cohesiveness, springiness and adhesiveness and (iv) four structural parameters: fibre numbers, extracellular spaces, cross section area, and connective tissue area, during the dry-cured ham process. Applying multiple polynomial regression enabled us to build phenomenological models relating proteolysis, salt and water contents to certain textural and structural parameters investigated. A linear relationship between lipid oxidation and proteolysis was also established. All of these models and relationships, once combined with salt penetration, water migration and heat transfer models, can be used to dynamically simulate all of these phenomena throughout dry-cured ham manufacturing.

Characterization and differentiation of Italian Parma, San Daniele and Toscano dry-cured hams: a multi-disciplinary approach

This study aimed at characterizing the sensory quality of Italian PDO dry-cured Parma, San Daniele and Toscano hams, applying a multi-disciplinary approach. Ham sensory profile as well as physico-chemical, aromatic, morphological and textural characteristics was investigated. There was a great difference between Toscano ham and Parma and San Daniele hams, which were more similar even though differentiated. Toscano ham showed higher scores for pork-meat odor, saltiness, dryness, fibrousness and hardness; accordingly, this ham was described by a high NaCl content and by high values of instrumental hardness, cohesiveness, gumminess and chewiness. Parma ham was characterized by a cured flavor, whereas San Daniele ham showed a wider fatty area and higher pH values. Parma and San Daniele hams were also described by higher values of sweetness, RGB color values and water activity. Sensory characteristics evaluated by trained assessors were correlated to instrumental measures, indicating that instrumental devices can be effectively applied for dry-cured ham characterization.