On-line prediction of beef quality traits using near infrared spectroscopy

Regression models from portable NIR spectra for predicting the carcass traits and meat quality of beef cattle

The aims of this study were to predict carcass and meat traits, as well as the chemical composition of the 9th to 11th rib sections of beef cattle from portable NIR spectra. The 9th to 11th rib section was obtained from 60 Nellore bulls and cull cows. NIR spectra were acquired at: P1 -center of Longissimus muscle; and P2 -subcutaneous fat cap. The models accurately estimated (P ≥ 0.083) all carcass and meat quality traits, except those for predicting red (a*) and yellow (b*) intensity from P1, and 12th-rib fat from P2. However, precision was highly variable among the models; those for the prediction of carcass pHu, 12th rib fat, toughness from P1, and those for 12th rib fat, a* and b* from P2 presented high precision (R2 ≥ 0.65 or CCC ≥ 0.63), whereas all other models evaluated presented moderate to low precision (R2 ≤ 0.39). Models built from P1 and P2 accurately estimated (P ≥ 0.066) the chemical composition of the meat plus fat, bones and, meat plus fat plus bones, except those for predicting the ether extract (EE) and crude protein (CP) of bones and the EE of Meat plus bones fraction from P2. However, precision was highly variable among the models (-0.08 ≤ R2 ≤ 0.86) of the 9th and 11th rib section. Those models for the prediction of dry matter (DM) and EE of the bones from P1; of EE from P1; and of EE, mineral matter (MM), CP from P2 of meat plus fat plus bones presented high precision (R2 ≥ 0.76 or CCC ≥ 0.62), whereas all other models evaluated presented moderate to low precision (R2 ≤ 0.45). Thus, models built from portable NIR spectra acquired at different points of the 9th to 11th rib section were recommended for predicting carcass and muscle quality traits as well as for predicting the chemical composition of this section of beef cattle. However, it is noteworthy, that the small sample size was one of the limitations of this study.

Intelligent System/Equipment for Quality Deterioration Detection of Fresh Food: Recent Advances and Application

The quality of fresh foods tends to deteriorate rapidly during harvesting, storage, and transportation. Intelligent detection equipment is designed to monitor and ensure product quality in the supply chain, measure appropriate food quality parameters in real time, and thus minimize quality degradation and potential financial losses. Through various available tracking devices, consumers can obtain actionable information about fresh food products. This paper reviews the recent progress in intelligent detection equipment for sensing the quality deterioration of fresh foods, including computer vision equipment, electronic nose, smart colorimetric films, hyperspectral imaging (HSI), near-infrared spectroscopy (NIR), nuclear magnetic resonance (NMR), ultrasonic non-destructive testing, and intelligent tracing equipment. These devices offer the advantages of high speed, non-destructive operation, precision, and high sensitivity.

Meat color and iridescence: Origin, analysis, and approaches to modulation

Meat color is an important aspect for the meat industry since it strongly determines the consumers' perception of product quality and thereby significantly influences the purchase decision. Emergence of new vegan meat analogs has renewed interest in the fundamental aspects of meat color in order to replicate it. The appearance of meat is based on a complex interplay between the pigment-based meat color from myoglobin and its chemical forms and light scattering from the muscle's microstructure. While myoglobin biochemistry and pigment-based meat color have been extensively studied, research on the physicochemical contribution of light scattering to meat color and the special case of structural colors causing meat iridescence has received only little attention. Former review articles focused mostly on the biochemical or physical mechanisms rather than the interplay between them, in particular the role that structural colors play. While from an economic point of view, meat iridescence might be considered negligible, an enhanced understanding of the underlying mechanisms and the interactions of light with meat microstructures can improve our overall understanding of meat color. Therefore, this review discusses both biochemical and physicochemical aspects of meat color including the origin of structural colors, highlights new color measurement methodologies suitable to investigate color phenomena such as meat iridescence, and finally presents approaches to modulate meat color in terms of base composition, additives, and processing.

Development of a Portable Near-Infrared Spectroscopy Tool for Detecting Freshness of Commercial Packaged Pork

Real-time monitoring of meat quality requires fast, accurate, low-cost, and non-destructive analytical methods that can be used throughout the entire production chain, including the packaged product. The aim of this work was to evaluate the potential of a portable near-infrared (NIR) spectroscopy tool for the on-site detection of freshness of pork loin fillets in modified atmosphere packaging (MAP) stored on display counters. Pork loin slices were sealed in MAP trays under two proportions of O2/CO2/N2: High-Ox-MAP (30/40/30) and Low-Ox-MAP (5/20/75). Changes in pH, color, thiobarbituric acid reactive substances (TBARS), Warner−Bratzler shear force (WBSF), and microbiology (total viable counts, Enteriobacteriaceae, and lactic acid bacteria) were monitored over 15 days post-mortem at 4 °C. VIS-NIR spectra were collected from pork fillets before (through the film cover) and after opening the trays (directly on the meat surface) with a portable LABSPEC 5000 NIR system in diffuse reflectance mode (350−2500 nm). Quantitative NIR models by partial least squares regression (PLSR) showed a promising prediction ability for meat color (L*, a*, C*, and h*) and microbiological variables (R2VAL > 0.72 and RPDVAL > 2). In addition, qualitative models using PLS discriminant analysis obtained good accuracy (over 90%) for classifying pork samples as fresh (acceptable for consumption) or spoiled (not acceptable) based on their microbiological counts. VIS-NIR spectroscopy allows rapid evaluation of product quality and shelf life and could be used for on-site control of pork quality.

Use of Near-Infrared Spectroscopy to Discriminate DFD Beef and Predict Meat Quality Traits in Autochthonous Breeds

The potential of near-infrared reflectance spectroscopy (NIRS) to discriminate Normal and DFD (dark, firm, and dry) beef and predict quality traits in 129 Longissimus thoracis (LT) samples from three Spanish purebreeds, Asturiana de los Valles (AV; n = 50), Rubia Gallega (RG; n = 37), and Retinta (RE; n = 42) was assessed. The results obtained by partial least squares-discriminant analysis (PLS-DA) indicated successful discrimination between Normal and DFD samples of meat from AV and RG (with sensitivity over 93% for both and specificity of 100 and 72%, respectively), while RE and total sample sets showed poorer results. Soft independent modelling of class analogies (SIMCA) showed 100% sensitivity for DFD meat in total, AV, RG, and RE sample sets and over 90% specificity for AV, RG, and RE, while it was very low for the total sample set (19.8%). NIRS quantitative models by partial least squares regression (PLSR) allowed reliable prediction of color parameters (CIE L*, a*, b*, hue, chroma). Results from qualitative and quantitative assays are interesting in terms of early decision making in the meat production chain to avoid economic losses and food waste.

Handheld near-infrared spectrometer allows on-line prediction of beef quality traits

The aim of this study was to evaluate the ability of a miniaturized near-infrared spectrometer to predict chemical parameters, technological and quality traits, fatty acids and minerals in intact Longissimus thoracis and Trapezius obtained from the ribs of 40 Charolais cattle. Modified partial least squares regression analysis to correlate spectra information to reference values, and several scatter correction and mathematical treatments have been tested. Leave-one-out cross-validation results showed that the handheld instrument could be used to obtain a good prediction of moisture and an approximate quantitative prediction of fat or protein contents, a*, b*, shear force and purge loss with coefficients of determination above 0.66. Moreover, prediction models were satisfactory for proportions of MUFA, PUFA, oleic and palmitic acids, for Fe and Cu contents. Overall, results exhibited the usefulness of the on-line miniaturized tool to predict some beef quality traits and the possibility to use it with commercial cuts without sampling, carcass deterioration nor grinding and consequent meat products' loss.

Detailed characterization of plant-based burgers

Flexitarians have reduced their meat consumption showing a rising interest in plant-based meat alternatives with 'meaty' characteristics, and we are witnessing an unprecedented growth of meat substitutes in the Western market. However, to our knowledge, no information regarding the 'simulated beef burgers' nutritional profile compared to similar meat products has been published yet. Here we show that, whilst both plant-based and meat-based burgers have similar protein profile and saturated fat content, the former are richer in minerals and polyunsaturated fatty acids. We found that the most abundant minerals in both categories were Na, K, P, S, Ca, and Mg; being Na and S content similar between groups. Only six amino acids differed between categories, being hydroxyproline exclusively in meat-based burgers. Plant-based burgers revealed fourfold greater content of n-6 than meat-based burgers, and greater short-chain fatty acids proportion. Our results demonstrate how 'simulated beef' products may be authenticated based on some specific nutrients and are a good source of minerals. We believe that there is a need to provide complete and unbiased nutritional information on these 'new' vegan products so that consumers can adjust their diet to nutritional needs.

Comparison of smartphone and lab-grade NIR spectrometers to measure chemical composition of lamb and beef

Context Near-infrared reflectance spectroscopy (NIRS) has been extensively investigated for non-destructive and rapid determination of pH and chemical composition of meat including water, crude protein, intramuscular fat (IMF) and stable isotopes. Smaller, cheaper NIRS sensors that connect to a smartphone could enhance the accessibility and uptake of this technology by consumers. However, the limited wavelength range of these sensors could restrict the accuracy of predictions compared with benchtop laboratory NIRS models. Aims To compare the precision and accuracy metrics of predicting pH, water, crude protein and IMF of three sample presentations and two sensors. Methods Fresh intact (FI) store-bought beef and lamb steak samples (n = 43) were ground and freeze-dried (FD), and then oven-dried to create freeze-dried oven-dried (FDOD) samples. All three forms of sample presentation (FI, FD, FDOD) were scanned using the smartphone and benchtop NIRS sensors. Key results The IMF was the best predicted trait in FD and FDOD forms by the smartphone NIRS (R2 >0.75; RPD >1.40) with limited differences between the two sensors. However, predictions on FI meat were poorer for all traits regardless of the NIRS scanner used (R2 ≤ 0.67; RPD ≤ 1.58) and not suitable for use in research or industry. Conclusion The smartphone NIRS sensor showed accuracy and precision comparable to benchtop NIRS to predict meat composition. However, these preliminary results found that neither of the two sensors reliably predicted quality attributes for industry or consumer applications. Implications Miniaturised NIRS sensors connected to smartphones could provide a practical solution to measure some meat quality attributes such as IMF, but the accuracy depends on sample presentation.

Collagen, intramuscular fat and proteolysis affect Warner-Bratzler shear-force of muscles from Bos taurus breed types differently at weaning, after backgrounding on pasture, and after feedlotting

Context The texture of beef is highly important for the eating experience, and there is a continued interest in understanding the biochemical basis for the variation in texture between cattle and their meat cuts in order to improve and minimise variation in tenderness due to production and processing factors. Aims The present study aimed to investigate the impact of characteristics of meat on Warner-Bratzler shear-force (WBSF) as an indicator of texture of beef as affected by breed type, age/feeding phase, and muscle. Methods Seventy-five steers of three breed types (Angus, Hereford and Wagyu × Angus) were slaughtered after weaning 6 months old (n = 15), after backgrounding 17 months old (n = 30) and after feedlotting 25 months old (n = 30). At slaughter three muscles (M. supraspinatus, M. semitendinosus and M. longissimus lumborum) were sampled from each steer, and pH, intramuscular fat and collagen content, sarcomere length, and proteolysis (desmin degradation) were measured and used to explain the variation in WBSF after 7 and 14 days of aging. Key results Meat from Hereford and Angus steers had higher WBSF after 7 days of aging compared with Wagyu × Angus steers, but after 14 days of aging there was only a difference between Hereford and Wagyu × Angus in the M. supraspinatus and M. semitendinosus. The WBSF of the young weaned steers and steers slaughtered after backgrounding were dependent on the degree of proteolysis in the muscles, whereas for steers slaughtered after feedlotting the content of collagen was more important for the WBSF. The amount of intramuscular fat had a significant impact on the differences in WBSF within the specific muscle studied. In contrast to the general dogma that WBSF increase with age, WBSF decreased in M. semitendinosus and M. longissimus lumborum from the weaned 6-month-old steers to the 25-month-old steers finished in feed-lot, whereas in M. supraspinatus the older feed-lot finished steers had a higher WBSF. Conclusion The factors contributing to the Warner-Bratzler shear force of beef depends on the age/feeding phase of the animal and the muscle and less on the breed type. Implications Optimisation of texture in beef through breeding and production should address different traits dependent on the age/feeding phase of the slaughter animal.

Historical Evolution and Food Control Achievements of Near Infrared Spectroscopy, Electronic Nose, and Electronic Tongue-Critical Overview

Amid today's stringent regulations and rising consumer awareness, failing to meet quality standards often results in health and financial compromises. In the lookout for solutions, the food industry has seen a surge in high-performing systems all along the production chain. By virtue of their wide-range designs, speed, and real-time data processing, the electronic tongue (E-tongue), electronic nose (E-nose), and near infrared (NIR) spectroscopy have been at the forefront of quality control technologies. The instruments have been used to fingerprint food properties and to control food production from farm-to-fork. Coupled with advanced chemometric tools, these high-throughput yet cost-effective tools have shifted the focus away from lengthy and laborious conventional methods. This special issue paper focuses on the historical overview of the instruments and their role in food quality measurements based on defined food matrices from the Codex General Standards. The instruments have been used to detect, classify, and predict adulteration of dairy products, sweeteners, beverages, fruits and vegetables, meat, and fish products. Multiple physico-chemical and sensory parameters of these foods have also been predicted with the instruments in combination with chemometrics. Their inherent potential for speedy, affordable, and reliable measurements makes them a perfect choice for food control. The high sensitivity of the instruments can sometimes be generally challenging due to the influence of environmental conditions, but mathematical correction techniques exist to combat these challenges.

Infrared Spectrometry as a High-Throughput Phenotyping Technology to Predict Complex Traits in Livestock Systems

High-throughput phenotyping technologies are growing in importance in livestock systems due to their ability to generate real-time, non-invasive, and accurate animal-level information. Collecting such individual-level information can generate novel traits and potentially improve animal selection and management decisions in livestock operations. One of the most relevant tools used in the dairy and beef industry to predict complex traits is infrared spectrometry, which is based on the analysis of the interaction between electromagnetic radiation and matter. The infrared electromagnetic radiation spans an enormous range of wavelengths and frequencies known as the electromagnetic spectrum. The spectrum is divided into different regions, with near- and mid-infrared regions being the main spectral regions used in livestock applications. The advantage of using infrared spectrometry includes speed, non-destructive measurement, and great potential for on-line analysis. This paper aims to review the use of mid- and near-infrared spectrometry techniques as tools to predict complex dairy and beef phenotypes, such as milk composition, feed efficiency, methane emission, fertility, energy balance, health status, and meat quality traits. Although several research studies have used these technologies to predict a wide range of phenotypes, most of them are based on Partial Least Squares (PLS) and did not considered other machine learning (ML) techniques to improve prediction quality. Therefore, we will discuss the role of analytical methods employed on spectral data to improve the predictive ability for complex traits in livestock operations. Furthermore, we will discuss different approaches to reduce data dimensionality and the impact of validation strategies on predictive quality.

Prediction of meat quality traits in the abattoir using portable and hand-held near-infrared spectrometers

The use of near-infrared spectrometers (NIRS) for predicting meat quality traits directly in the abattoir was tested with three trials. For the calibration trial, spectra were acquired from the cross-cut surface of the Longissimus thoracis muscle on 1166 carcasses of Piemontese young bulls with a portable visible-near-infrared spectrometer (Vis-NIRS) and with a small hand-held instrument (Micro-NIRS). A sample of the same muscle was analyzed to provide the reference. Validation statistics of the two instruments were similar. Predictabilities of meat color and purge loss were good, whereas for the other traits they were less promising. The repeatability trial showed that post-slaughter factors, not predictable by NIR spectra collected in the abattoir, affect reference meat quality values. A trial under operative conditions showed that both spectrometers were able to capture the major sources of variation in most of the meat quality traits. Overall, NIRS could be used to predict the animals' "native" characteristics exploitable for genetic improvement of meat quality traits.

Online Prediction of Physico-Chemical Quality Attributes of Beef Using Visible-Near-Infrared Spectroscopy and Chemometrics

The potential of visible–near-infrared (Vis–NIR) spectroscopy to predict physico-chemical quality traits in 368 samples of bovine musculus longissimus thoracis et lumborum (LTL) was evaluated. A fibre-optic probe was applied on the exposed surface of the bovine carcass for the collection of spectra, including the neck and rump (1 h and 2 h post-mortem and after quartering, i.e., 24 h and 25 h post-mortem) and the boned-out LTL muscle (48 h and 49 h post-mortem). In parallel, reference analysis for physico-chemical parameters of beef quality including ultimate pH, colour (L, a*, b*), cook loss and drip loss was conducted using standard laboratory methods. Partial least-squares (PLS) regression models were used to correlate the spectral information with reference quality parameters of beef muscle. Different mathematical pre-treatments and their combinations were applied to improve the model accuracy, which was evaluated on the basis of the coefficient of determination of calibration (R²C) and cross-validation (R²CV) and root-mean-square error of calibration (RMSEC) and cross-validation (RMSECV). Reliable cross-validation models were achieved for ultimate pH (R²CV: 0.91 (quartering, 24 h) and R²CV: 0.96 (LTL muscle, 48 h)) and drip loss (R²CV: 0.82 (quartering, 24 h) and R²CV: 0.99 (LTL muscle, 48 h)) with lower RMSECV values. The results show the potential of Vis–NIR spectroscopy for online prediction of certain quality parameters of beef over different time periods.

Investigating the use of visible and near infrared spectroscopy to predict sensory and texture attributes of beef M. longissimus thoracis et lumborum

The aim of this study was to calibrate chemometric models to predict beef M. longissimus thoracis et lumborum (LTL) sensory and textural values using visible-near infrared (VISNIR) spectroscopy. Spectra were collected on the cut surface of LTL steaks both on-line and off-line. Cooked LTL steaks were analysed by a trained beef sensory panel as well as undergoing WBSF analysis. The best coefficients of determination of cross validation (R²CV) in the current study were for textural traits (WBSF = 0.22; stringiness = 0.22; crumbly texture = 0.41: all 3 models calibrated using 48 h post-mortem spectra), and some sensory flavour traits (fatty mouthfeel = 0.23; fatty after-effect = 0.28: both calibrated using 49 h post-mortem spectra). The results of this experiment indicate that VISNIR spectroscopy has potential to predict a range of sensory traits (particularly textural traits) with an acceptable level of accuracy at specific post-mortem times.

Feasibility of Determination of Foodborne Microbe Contamination of Fresh-Cut Shredded Cabbage Using SW-NIR

Shredded cabbage is widely used in much ready-to-eat food. Therefore, rapid methods for detecting and monitoring the contamination of foodborne microbes is essential. Short wavelength near infrared (SW-NIR) spectroscopy was applied on two types of solutions, a drained solution from the outer surface of the shredded cabbage (SC) and a ground solution of shredded cabbage (GC) which were inoculated with a mixture of two bacterial suspensions, Escherichia coli and Salmonella typhimurium. NIR spectra of around 700 to 1100 nm were collected from the samples after 0, 4, and 8 h at 37 °C incubation, along with the growth of total bacteria, E. coli and S. typhimurium. The raw spectra were obtained from both sample types, clearly separated with the increase of incubation time. The first derivative, a Savitzky–Golay pretreatment, was applied on the GC spectra, while the second derivative was applied on the SC spectra before developing the calibration equation, using partial least squares regression (PLS). The obtained correlation (r) of the SC spectra was higher than the GC spectra, while the standard error of cross-validation (SECV) was lower. The ratio of prediction of deviation (RPD) of the SC spectra was higher than the GC spectra, especially in total bacteria, quite normal for the E. coli but relatively low for the S. typhimurium. The prediction results of microbial spoilage were more reliable on the SC than on the GC spectra. Total bacterial detection was best for quantitative measurement, as E. coli contamination could only be distinguished between high and low values. Conversely, S. typhimurium predictions were not optimal for either sample type. The SW-NIR shows the feasibility for detecting the existence of microbes in the solution obtained from SC, but for a more specific application for discrimination or quantitation is needed, proving further research in still required.

Evaluation of WBSF, Color, Cooking Loss of Longissimus Lumborum Muscle with Fiber Optic Near-Infrared Spectroscopy (FT-NIR), Depending on Aging Time

Near-infrared spectroscopy is a known technique for assessing the quality of compounds found in food products. However, it is still not widely used for predicting physical properties of meat using the online system. This study aims to assess the possibility of application of a NIR equipped with fiber optic system as an online measurement system to predict Warner⁻Bratzler shear force (WBSF) value, cooking loss (CL), and color of longissimus lumborum muscle, depending on aging time. The prediction model satisfactorily estimated the WBSF on day 1 and day 7 of aging as well as a* color parameter on day one and CL on day 21. This could be explained by the fact that during beef aging, the physicochemical structure of meat becomes more uniform and less differentiation of raw data is observed. There is still a challenge to obtain a verifiable model for the prediction of physical properties, using NIR, by utilizing more varied raw data.

Classification of Chicken Parts Using a Portable Near-Infrared (NIR) Spectrophotometer and Machine Learning

Identification of different chicken parts using portable equipment could provide useful information for the processing industry and also for authentication purposes. Traditionally, physical-chemical analysis could deal with this task, but some disadvantages arise such as time constraints and requirements of chemicals. Recently, near-infrared (NIR) spectroscopy and machine learning (ML) techniques have been widely used to obtain a rapid, noninvasive, and precise characterization of biological samples. This study aims at classifying chicken parts (breasts, thighs, and drumstick) using portable NIR equipment combined with ML algorithms. Physical and chemical attributes (pH and L*a*b* color features) and chemical composition (protein, fat, moisture, and ash) were determined for each sample. Spectral information was acquired using a portable NIR spectrophotometer within the range 900-1700 nm and principal component analysis was used as screening approach. Support vector machine and random forest algorithms were compared for chicken meat classification. Results confirmed the possibility of differentiating breast samples from thighs and drumstick with 98.8% accuracy. The results showed the potential of using a NIR portable spectrophotometer combined with a ML approach for differentiation of chicken parts in the processing industry.

Developments and Challenges in Online NIR Spectroscopy for Meat Processing

Meat and meat products are popular foods due to their balanced nutritional nature and their availability in a variety of forms. In recent years, due to an increase in the consumer awareness regarding product quality and authenticity of food, rapid and effective quality control systems have been sought by meat industries. Near-Infrared (NIR) spectroscopy has been identified as a fast and cost-effective tool for estimating various meat quality parameters as well as detecting adulteration. This review focusses on the on/inline application of single and multiprobe NIR spectroscopy for the analysis of meat and meat products starting from the year 1996 to 2017. The article gives a brief description about the theory of NIR spectroscopy followed by its application for meat and meat products analysis. A detailed discussion is provided on the various studies regarding applications of NIR spectroscopy and specifically for on/inline monitoring along with their advantages and disadvantages. Additionally, a brief description has been given about the various chemometric techniques utilized in the mentioned studies. Finally, it discusses challenges encountered and future prospects of the technology. It is concluded that, advancements in the fields of NIR spectroscopy and chemometrics have immensely increased the potential of the technology as a reliable on/inline monitoring tool for the meat industry.

Classification of frankfurters by FT-Raman spectroscopy and chemometric methods

Frankfurters are widely consumed all over the world, and the production requires a wide range of meat and non-meat ingredients. Due to these characteristics, frankfurters are products that can be easily adulterated with lower value meats, and the presence of undeclared species. Adulterations are often still difficult to detect, due the fact that the adulterant components are usually very similar to the authentic product. In this work, FT-Raman spectroscopy was employed as a rapid technique for assessing the quality of frankfurters. Based on information provided by the Raman spectra, a multivariate classification model was developed to identify the frankfurter type. The aim was to study three types of frankfurters (chicken, turkey and mixed meat) according to their Raman spectra, based on the fatty vibrational bands. Classification model was built using partial least square discriminant analysis (PLS-DA) and the performance model was evaluated in terms of sensitivity, specificity, accuracy, efficiency and Matthews’s correlation coefficient. The PLS-DA models give sensitivity and specificity values on the test set in the ranges of 88%–100%, showing good performance of the classification models. The work shows the Raman spectroscopy with chemometric tools can be used as an analytical tool in quality control of frankfurters.