Development of a heterologous enzyme-linked immunosorbent assay for the detection of clindamycin and lincomycin residues in edible animal tissues

An electrochemiluminescence aptasensor based on Ti3C2 QDs-1T/2H MoS2 nano-hybrid material for the highly sensitive detection of lincomycin

Developing a highly selective and sensitive analysis strategy for lincomycin (LIN) is of great significance for environmental protection and food safety. Herein, we reported a novel electrochemiluminescence (ECL) aptasensor based on Ti3C2 QDs-1T/2H MoS2 nano-hybrid luminophore for detection of LIN. The hybridization of Ti3C2 QDs and 1T/2H MoS2 endowed nanocomposite with structural and compositional advantages for boosting the ECL performance of QDs by about three times. This enhancement could be attributed to the remarkable electrocatalytic activity and high conductivity exhibited by 1T/2H MoS2. Secondly, the great surface area of 1T/2H MoS2 is conducive to the high dispersion of Ti3C2 QDs, and its good conductivity could promote charge transfer. On the other hand, the excellent catalytic performance of 1T/2H MoS2 could facilitate the reduction of S2O82- to produce more radical, which significantly enhance the ECL signal of Ti3C2 QDs. Given these features, a sensor for detection of LIN was established based on specific recognition between target and aptamer. The sensor showed a good linear relationship (0.05 ng mL-1 ∼100 μg mL-1) with a detection limit as low as 0.02 ng mL-1. It is worth noting that this work has been validated in testing milk samples, exhibiting great potential application prospects in food analysis.

Low temperature synthesis of carbon dots in microfluidic chip and their application for sensing cefquinome residues in milk

In this study, the N-doped carbon dots were continuously synthesized by a facile microfluidic strategy at 90 °C, and their quantum yields reached 19.2%. The characteristics of the obtained carbon dots could be real-time monitored in order to synthesize carbon dots with specific properties. By incorporating the carbon dots into a well-established enzymatic cascade amplification system, an inner filter effect-based fluorescence immunoassay was set up for ultrasensitive detection of cefquinome residues in milk samples. The developed fluorescence immunoassay provided a low detection limit of 0.78 ng/mL, which satisfied the maximum residue limit set by authorities. The fluorescence immunoassay had an 50% inhibition concentration of 0.19 ng/mL against cefquinome and showed a good linear relationship from 0.013 ng/mL to 1.52 ng/mL. While, the average recovery values ranged from 77.8% to 107.8% in spiked milk samples, with relative standard deviations ranging from 6.8% to 10.9%. Compared with conventional methods, the microfluidic chip was more flexible on carbon dots synthesis and the developed fluorescence immunoassay was more sensitive and eco-friendlier for ultra-trace cefquinome residue analysis.

Visual Recognition and Detection of Clindamycin by Au@Ag Core-Shell Nanoparticles

The work described a new colorimetric sensor for the quantitative detection of clindamycin based on Au@Ag core-shell nanoparticles (Au@Ag NPs). The obtained Au@Ag NPs were characterized by transmission electron microscopy (TEM) and ultraviolet and visible spectrophotometry (UV-vis). When Au@Ag NPs were added to a clindamycin solution, it can be observed that the color immediately changed from bright yellow to gray-blue and the absorption spectrum also changed, realizing the visual detection of clindamycin. Under optimal conditions, the absorption ratio (A ₅₄₆/A ₄₀₀) of the UV-vis spectra increased linearly with the concentration of clindamycin ranging from 6.25 × 10^-7 to 7.50 × 10^-6 mol/L (R ² = 0.9945), with a limit of detection (LOD) of 2.00 × 10^-7 mol/L and good recovery of 100.0-102.0% (relative standard deviation (RSD) < 2%). The detection process was convenient without complicated instruments. Compared with other analytes, the Au@Ag NPs detection system has good selectivity for clindamycin. In addition, the Au@Ag NPs colorimetric sensor was successfully used to determine clindamycin in human urine samples. This study provides a simple, rapid, intuitive, and low-cost visualization analysis method of clindamycin, which was helpful for the visualization detection of other targets.

Onsite/on-field analysis of pesticide and veterinary drug residues by a state-of-art technology: A review

Pesticides and veterinary drugs are generally employed to control pests and insects in crop and livestock farming. However, remaining residues are considered potentially hazardous to human health and the environment. Therefore, regular monitoring is required for assessing and legislation of pesticides and veterinary drugs. Various approaches to determining residues in various agricultural and animal food products have been reported. Most analytical methods involve sample extraction, purification (cleanup), and detection. Traditional sample preparation is time-consuming labor-intensive, expensive, and requires a large amount of toxic organic solvent, along with high probability for the decomposition of a compound before the analysis. Thus, modern sample preparation techniques, such as the quick, easy, cheap, effective, rugged, and safe method, have been widely accepted in the scientific community for its versatile application; however, it still requires a laboratory setup for the extraction and purification processes, which also involves the utilization of a toxic solvent. Therefore, it is crucial to elucidate recent technologies that are simple, portable, green, quick, and cost-effective for onsite and infield residue detections. Several technologies, such as surface-enhanced Raman spectroscopy, quantum dots, biosensing, and miniaturized gas chromatography, are now available. Further, several onsite techniques, such as ion mobility-mass spectrometry, are now being upgraded; some of them, although unable to analyze field sample directly, can analyze a large number of compounds within very short time (such as time-of-flight and Orbitrap mass spectrometry). Thus, to stay updated with scientific advances and analyze organic contaminants effectively and safely, it is necessary to study all of the state-of-art technology.

Simultaneous quantification of cefuroxime and clindamycin in human lumbar anulus fibrosus, nucleus pulposus and serum via UPLC-MS/MS

BACKGROUND

This study aimed to develop a sensitive, accurate method for simultaneously quantifying cefuroxime and clindamycin in human serum, lumbar anulus fibrosus and nucleus pulposus.

METHODS

Cefuroxime and clindamycin were quantified using ultra high-performance liquid chromatography-electrospray ionization tandem mass spectrometry in multiple-reaction-monitoring mode on a triple-quadrupole AB Qtrap 5500 system in positive ion mode. Internal standards were D₃-cefuroxime and D_3,¹³C-clindamycin. Samples were pretreated by precipitating total protein.

RESULTS

The method showed high sensitivity and good linearity over broad calibration ranges from 100 to 100 000 ng/mL for cefuroxime and 10 to 10 000 ng/mL for clindamycin in serum, and from 10 to 10 000 ng/mL for cefuroxime and 1 to 1 000 ng/mL for clindamycin in lumbar nucleus pulposus. In all sample types, correlation coefficients were greater than 0.99, intra- and inter-day precision (relative standard deviation) was less than 15%, and accuracy (relative error) was within 14% for both analytes. This method was effective at quantifying penetration of cefuroxime and clindamycin in patients undergoing oblique lumbar interbody fusion surgery.

CONCLUSIONS

A very sensitive, specific method for simultaneous detection of cefuroxime and clindamycin has been developed for human lumbar anulus fibrosus, nucleus pulposus and serum samples.

Impedimetric electronic tongue based on molybdenum disulfide and graphene oxide for monitoring antibiotics in liquid media

Antibiotics are considered emerging pollutants which indiscriminate use has led to the development of antibiotic-resistant bacteria, while their improper disposal has caused adverse effects to the environment and human health. Thus, the development of devices or techniques capable of detecting antibiotics with high sensitivity, low detection limits, and reasonable cost becomes of prime importance. In this work, an electronic tongue (e-tongue) based on molybdenum disulfide (MoS₂) and graphene oxide (GO) was developed and employed to detect four distinct antibiotics, namely cloxacillin benzathine, erythromycin, streptomycin sulfate, and tetracycline hydrochloride. The five sensing units of the e-tongue were obtained using the drop-casting method to modify gold interdigitated electrodes with MoS₂ and GO. Using Principal Component Analysis to process the experimental data allowed the e-tongue to recognize samples contaminated with distinct antibiotics at varied concentrations from 0.5 to 5.0 nmol L^-1. Analyses with real samples were also performed using river water and human urine and the electronic tongue was able to differentiate the samples at a nanomolar level. The proposed system represents a sensitive and low-cost alternative for antibiotic analyses in different liquid media.

Gold Immunochromatographic Assay for Rapid On-Site Detection of Lincosamide Residues in Milk, Egg, Beef, and Honey Samples

Lincosamides (LMs), include clindamycin (CLIN), lincomycin (LIN), and pirlimycin (PIR), that are widely used as veterinary drugs. LM residues in edible animal origin foods endanger human health and are in urgent need of establishing fast, simple, and highly sensitive detection methods. A gold immunochromatographic strip is prepared to detect CLIN, LIN, and PIR residues simultaneously with a single monoclonal antibody. This antibody is obtained with the design of a novel Hapten and can simultaneously recognize CLIN, LIN, and PIR. Under optimized conditions, the strip results can be semi-quantitatively evaluated with the naked eye within 15 min, with cut-off values in phosphate-buffered saline of 1 ng mL^-1 for CLIN, 10 ng mL^-1 for LIN, and 25 ng mL^-1 for PIR, respectively. Besides, the strip can also be quantified using a hand-held strip scanner, and the spiked samples are used for establishing matrix curves. The limits of detection for CLIN, LIN, and PIR in spiked milk, egg, beef, and honey samples can satisfy the detection requirement. The utility of this strip is also confirmed by positive honey sample. In short, this strip should be expected to be a useful tool for the rapid on-site screening of lincosamide residues in milk, egg, beef, and honey samples.

Implementation and Validation of an Analytical Method for Lincomycin Determination in Feathers and Edible Tissues of Broiler Chickens by Liquid Chromatography Tandem Mass Spectrometry

Recent studies have detected different antimicrobial residues in broiler chicken feathers, where they persisted for longer periods of time and at greater concentrations than in edible tissues. However, until today, lincomycin behaviour in this nonedible tissue has not been assessed yet. Considering this, an analytical methodology to detect and quantify this antibiotic concentration in feathers, muscle, and liver tissues from broiler chickens was implemented and in-house validated. The methodology will allow the determination of the bioaccumulation of this highly persistent antibiotic in feathers of treated birds. For this purpose, 98% lincomycin and 95% lincomycin D3 standards were used. Methanol was selected as the extraction solvent, and Chromabond® Florisil® cartridges were used for the clean-up stage. The separation of analytes was performed through the analytical column SunFire C18 with a running time of 4 minutes, and the instrumental analysis was performed through an LC-MS/MS, with a liquid chromatograph Agilent® 1290 Infinity, coupled to an AB SCIEX® API 5500 mass spectrometer. An internal protocol for an in-house validation was designed based on recommendations from Commission Decision 2002/657/EC and the Guidance document on the estimation of limit of detection and limit of quantification for measurements in the field of contaminants in feed and food. The average retention time for lincomycin was 2.255 min (for quantifier ion, 126.0). The calibration curves showed a coefficient of determination (r ²) greater than 0.99 for all matrices, while recovery levels ranged between 98% and 101%. The limit of detection (LOD) calculated was of 19, 22, and 10 μg·kg^-1, and the limit of quantification (LOQ) was of 62, 73, and 34 μg·kg^-1 in feathers, muscle, and liver, respectively. This method detects lincomycin in the studied matrices, confidently and accurately, as it is required for designing analytical studies of drug residues in edible and nonedible tissues, such as feathers.

Metabolome and gut microbiota variation with long-term intake of Panax ginseng extracts on rats

In this study, untargeted GC-TOFMS metabolomic analysis of serum, cecum and ileum intestinal contents was conducted to understand the effect of the long-term intake of Ginseng extracts.

A Dual-Color Quantum Dots Encoded Frit-Based Immunoassay for Visual Detection of Aflatoxin M1 and Pirlimycin Residues in Milk

Mycotoxins and antibacterial agents are the main chemical hazards that lead to several health problems. Nowadays, multiplex immunoassay is a primary goal throughout the world. Here, aflatoxin M₁ and pirlimycin were selected as models, and a novel dual colorimetric encoded frit-based immunoassay was developed for simultaneously screening of aflatoxin M₁ and pirlimycin residues in milk. This multiplex frit-based immunoassay combined two monoclonal antibodies to extend the spectrum of analytes and to enable detection of two classes of analytes in a single test. The cutoff values were 0.02 μg/kg for aflatoxin M₁ and 0.5 μg/kg for pirlimycin, which satisfied the requirement to measure the maximum residue levels. The novel colorimetric frit-based immunoassay has the advantage of high throughput, short analysis time, reduced overall cost per assay, and can be used as a rapid screening technique for simultaneously detecting aflatoxin M₁ and pirlimycin residues in milk.