Prediction of beef meat fatty acid composition by visible-near-infrared spectroscopy was improved by preliminary freeze-drying

Non-Destructive Detection of Meat Quality Based on Multiple Spectral Dimension Reduction Methods by Near-Infrared Spectroscopy

The potential of four dimension reduction methods for near-infrared spectroscopy was investigated, in terms of predicting the protein, fat, and moisture contents in lamb meat. With visible/near-infrared spectroscopy at 400-1050 nm and 900-1700 nm, respectively, calibration models using partial least squares regression (PLSR) or multiple linear regression (MLR) between spectra and quality parameters were established and compared. The MLR prediction models for all three quality parameters based on the wavelengths selected by stepwise regression achieved the best results in the spectral region of 400-1050 nm. As for the spectral region of 900-1700 nm, the PLSR prediction model based on the raw spectra or high-correlation spectra achieved better results. The results of this study indicate that sampling interval shortening and of peak-to-trough jump features are worthy of further study, due to their great potential in explaining the quality parameters.

Agricultural Potentials of Molecular Spectroscopy and Advances for Food Authentication: An Overview

Meat, fish, coffee, tea, mushroom, and spices are foods that have been acknowledged for their nutritional benefits but are also reportedly targets of fraud and tampering due to their economic value. Conventional methods often take precedence for monitoring these foods, but rapid advanced instruments employing molecular spectroscopic techniques are gradually claiming dominance due to their numerous advantages such as low cost, little to no sample preparation, and, above all, their ability to fingerprint and detect a deviation from quality. This review aims to provide a detailed overview of common molecular spectroscopic techniques and their use for agricultural and food quality management. Using multiple databases including ScienceDirect, Scopus, Web of Science, and Google Scholar, 171 research publications including research articles, review papers, and book chapters were thoroughly reviewed and discussed to highlight new trends, accomplishments, challenges, and benefits of using molecular spectroscopic methods for studying food matrices. It was observed that Near infrared spectroscopy (NIRS), Infrared spectroscopy (IR), Hyperspectral imaging (his), and Nuclear magnetic resonance spectroscopy (NMR) stand out in particular for the identification of geographical origin, compositional analysis, authentication, and the detection of adulteration of meat, fish, coffee, tea, mushroom, and spices; however, the potential of UV/Vis, 1H-NMR, and Raman spectroscopy (RS) for similar purposes is not negligible. The methods rely heavily on preprocessing and chemometric methods, but their reliance on conventional reference data which can sometimes be unreliable, for quantitative analysis, is perhaps one of their dominant challenges. Nonetheless, the emergence of handheld versions of these techniques is an area that is continuously being explored for digitalized remote analysis.

Handheld near-infrared spectrometer allows on-line prediction of beef quality traits

The aim of this study was to evaluate the ability of a miniaturized near-infrared spectrometer to predict chemical parameters, technological and quality traits, fatty acids and minerals in intact Longissimus thoracis and Trapezius obtained from the ribs of 40 Charolais cattle. Modified partial least squares regression analysis to correlate spectra information to reference values, and several scatter correction and mathematical treatments have been tested. Leave-one-out cross-validation results showed that the handheld instrument could be used to obtain a good prediction of moisture and an approximate quantitative prediction of fat or protein contents, a*, b*, shear force and purge loss with coefficients of determination above 0.66. Moreover, prediction models were satisfactory for proportions of MUFA, PUFA, oleic and palmitic acids, for Fe and Cu contents. Overall, results exhibited the usefulness of the on-line miniaturized tool to predict some beef quality traits and the possibility to use it with commercial cuts without sampling, carcass deterioration nor grinding and consequent meat products' loss.

Prediction of carcass composition and meat and fat quality using sensing technologies: A review

Consumer demand for high-quality healthy food is increasing,  thus meat processors require the means toassess these rapidly, accurately, and inexpensively. Traditional methods forquality assessments are time-consuming, expensive, invasive, and have potentialto negatively impact the environment. Consequently, emphasis has been put onfinding non-destructive, fast, and accurate technologies for productcomposition and quality evaluation. Research in this area is advancing rapidlythrough recent developments in the areas of portability, accuracy, and machinelearning. The present review, therefore, critically evaluates and summarizes developmentsof popular non-invasive technologies (i.e., from imaging to spectroscopicsensing technologies) for estimating beef, pork, and lamb composition andquality, which will hopefully assist in the implementation of thesetechnologies for rapid evaluation/real-timegrading of livestock products in the nearfuture.

Near-Infrared Reflectance Spectroscopy for Predicting the Phospholipid Fraction and the Total Fatty Acid Composition of Freeze-Dried Beef

Research on fatty acids (FA) is important because their intake is related to human health. NIRS can be a useful tool to estimate the FA of beef but due to the high moisture and the high absorbance of water makes it difficult to calibrate the analyses. This work evaluated near-infrared reflectance spectroscopy as a tool to assess the total fatty acid composition and the phospholipid fraction of fatty acids of beef using freeze-dried meat. An average of 22 unrelated pure breed young bulls from 15 European breeds were reared on a common concentrate-based diet. A total of 332 longissimus thoracis steaks were analysed for fatty acid composition and a freeze-dried sample was subjected to near-infrared spectral analysis. 220 samples (67%) were used as a calibration set with the remaining 110 (33%) being used for validation of the models obtained. There was a large variation in the total FA concentration across the animals giving a good data set for the analysis and whilst the coefficient of variation was nearly 68% for the monounsaturated FA it was only 27% for the polyunsaturated fatty acids (PUFA). PLS method was used to develop the prediction models. The models for the phospholipid fraction had a low R²p and high standard error, while models for neutral lipid had the best performance, in general. It was not possible to obtain a good prediction of many individual PUFA concentrations being present at low concentrations and less variable than other FA. The best models were developed for Total FA, saturated FA, 9c18:1 and 16:1 with R²_p greater than 0.76. This study indicates that NIRS is a feasible and useful tool for screening purposes and it has the potential to predict most of the FA of freeze-dried beef.

Prediction of the intramuscular connective tissue components of fresh and freeze-dried samples by near infrared spectroscopy

This study compared the performance of near-infrared spectroscopy (NIRS) models on fresh and freeze-dried beef muscle samples to predict intramuscular connective tissue (IMCT) components and to determine whether the accuracy of the models differed among different muscles from beef cattle. The hypothesis was that the water content of muscle samples would negatively influence the accuracy of the models, which would differ among muscles. Fresh and freeze-dried samples (n = 171) of four muscles were used to develop NIRS models to predict the contents IMCT. For the total collagen content, the standard error of cross validation (SECV) for model using freeze-dried samples (0.75 mg OH-prol/g DM) was lower than that for model using fresh samples (0.84 mg OH-prol/g DM). For cross-links and proteoglycans, the SECV for models using fresh sample spectra was lower than that for models using freeze-dried sample spectra. The accuracy of the prediction of the models also differed among predicted muscle types.

Validation of two laboratory methods for beef intramuscular fat quantification

Many studies on beef nutritional qualities require the quantification of intramuscular fat. To reduce the sample amount, solvent use and time of analysis, two alternative methods to the Folch et al. (1957) reference method were studied: a miniaturised Folch's method and a near-infrared spectroscopic method. Performances and acceptability limits were evaluated with accuracy profiles for each of the methods. Equations to correct bias between the alternative and reference methods were calculated. Uncertainties associated with measurements were determined, and the validity domains were defined. From a previous set of studies, the ability of each method to discriminate samples from bovines of different breeds or receiving diverse treatments was tested. The validity domain of the miniaturised Folch's method ranged from 1.9 to 13.8 g of total lipids/100 g of tissue, and that of the near-infrared spectroscopic method ranged from 4.8 to 13.8 g of total lipids/100 g of tissue, with less than 20% difference from the reference method's results. Thus, the two alternative methods could be used depending on the research objectives: the miniaturised Folch's method could be used for detailed quantification of intramuscular fat and the near-infrared spectroscopic method for a quick classification of a large number of muscles. The precise knowledge of uncertainties associated with each measurement was determined, and perfect continuity with the results obtained so far with the reference Folch's method was confirmed.

Combination of spectra and texture data of hyperspectral imaging for prediction and visualization of palmitic acid and oleic acid contents in lamb meat

The feasibility of combining spectral and textural information from hyperspectral imaging to improve the prediction of the C16:0 and C18:1 n9 contents for lamb was explored. 29 and 22 optimal wavelengths were selected for the C16:0 and C18:1 n9 contents, respectively, by conducting the variable combination population analysis-iteratively retaining informative variables (VCPA-IRIV) algorithm. To extract the textural features of images, a gray-level co-occurrence matrix (GLCM) analysis was implemented in the first principal component image. The least squares support vector machine (LSSVM) model and the partial least squares regression (PLSR) model were developed to predict the C16:0 and C18:1 n9 contents from the spectra and the fusion data. The distribution map was visualized using the best model with the imaging process. The results showed that the combination of the spectral and textural information of hyperspectral imaging coupled with the VCPA-IRIV algorithm had strong potential for the prediction and visualization of the C16:0 and C18:1 n9 contents of lamb.