Prediction of lamb carcase C-site fat depth and GR tissue depth using a non-invasive portable microwave system

Comparison of ultra-wide band microwave system and ultrasound in live cattle to predict beef carcase subcutaneous fatness

Ultrasound and ultrawide band microwave system (MiS) were directly compared in their ability to scan live cattle to predict carcase traits. Commercial beef cattle (n = 315) were scanned on farm 0-14 days prior to slaughter. Traits measured were subcutaneous fatness at the P8 site (over the gluteus muscle on the rump, at the intersection of a line through the pin bone parallel to the chine and perpendicular through the 3rd sacral crest) and subcutaneous fatness at the rib fat site (between 12th & 13th rib, ¾ of the length ventrally over the longissimus muscle). The precision of prediction of carcase traits was slightly better using MiS. MiS prediction of P8 fat depth had an average RMSEP of 2.48 mm and R2 of 0.65. The MiS could predict carcase rib fat with an average RMSEP of 2.28 mm and R2 of 0.56. The accuracy of prediction was very similar between the two technologies. When predicting P8, the average bias was smallest using MiS at 0.157 mm, but the average slope was smallest using ultrasound at 0.03 mm. When predicting rib fat, MiS had the smallest average bias at 0.204 mm, and smallest average slope deviation at 0.06 mm. The MiS predicted P8 and rib fat carcase traits with similar precision and accuracy as ultrasound.

Changing Australia's trading language has enhanced the implementation of objective carcase measurement technologies

In 2016 an Australian project, the Advanced Livestock Measurement Technologies project (ALMTech), was initiated to accelerate the development and implementation of technologies that measure lean meat yield and eating quality. This led to the commercial testing, and implementation of a range of new technologies in the lamb, beef, and pork industries. For measuring lean meat yield %, these technologies included dual energy X-ray absorptiometry, hand-held microwave systems, and 3-D imaging systems. For measuring beef rib-eye traits and intramuscular fat %, both pre- and post-chilling technologies were developed. Post-chilling, a range of camera systems and near infrared spectrophotometers were developed. While pre-chilling, technologies included insertable needle probes, nuclear magnetic resonance, and X-ray systems. Initially these technologies were trained to predict the pre-existing traits already traded upon within industry. However, this approach was limiting because the technologies could measure attributes that were either non-existent in the trading language, were superior as calibrating standards, or more accurately reflected value than the pre-existing trait. Therefore, we introduced IMF% into the trading language for both beef and sheep meat, and carcase lean%, fat%, and bone% for sheep meat. These new technologies and the traits that they predict have delivered multiple benefits. Technology provider-companies are instilled with the confidence to commercialise due to the provision of achievable accreditation standards. Processors have the confidence to invest in these technologies and establish payment grids based upon their measurements. And lastly, it has enhanced data flow into genetic databases, industry data systems (MSA), and as feedback to producers.

Meat tenderness in Australian lamb: Data editing, environmental variation and their effects in genetic parameter estimation

Breeding for meat quality increases the value of lambs and requires reliable genetic parameters to achieve balanced genetic progress. Meat tenderness, accomplished by selecting for lower shear force, is an important eating quality trait because of its relationship with consumer satisfaction. Factors influencing shear force, include the pH and temperature decline post-mortem which can contribute towards higher shear force values and increased variation across contemporary groups. This study explored if genetic parameters for shear force change when post slaughter covariates and heterogeneous variance are corrected for, using data from 32,223 animals from different sheep breeds. Results showed that removing extreme individuals and contemporary groups with high mean shear force values reduced residual variance, followed by a smaller reduction in additive genetic variance and little effect on heritability. Results show that edited data performed better at predicting progeny performance and reduced potential bias introduced in the genetic evaluation due to data quality. The effect of including post-slaughter covariates in the genetic analysis was tested by estimating different model predictability through regression of estimated breeding values against offspring performance, showing that the model including hot carcass weight performed better followed by the one including both carcass weight and C-site fat depth. Our results highlight that historic and current in-plant recording practices do not provide the capacity to account for non-genetic factors associated with abattoir environment that might be impacting the ability to accurately calculate shear force breeding values. In that sense, genetic evaluation can be improved by applying more rigorous data editing.

Ultra-wideband microwave precisely and accurately predicts sheepmeat hot carcase GR tissue depth

A portable ultra-wideband microwave system (MiS) coupled with an antipodal slot Vivaldi patch antenna (VPA) was used as an objective measurement technology to predict sheep meat carcase GR tissue depth, tested against AUS-MEAT national accreditation standards. Experiment one developed the MiS GR tissue depth prediction equation using lamb carcasses (n = 832) from two slaughter groups. To create the prediction equations, a two layered machine learning stacking ensemble technique was used. The performance of this equation was tested within the dataset using a k-fold cross validation (k = 5), which demonstrated excellent precision and accuracy with an average R2 of 0.91, RMSEP 2.11, bias 0.39 and slope 0.03. Experiment two tested the prediction equation against the AUS-MEAT GR tissue depth accreditation framework which stipulates predictions from a device must assign the correct fat score, with a tolerance of ±2 mm of the score boundary, and 90% accuracy. For a device to be accredited three measurements captured within the same device, as well as measurements across three different devices, must meet the AUS-MEAT error thresholds. Three MiS devices scanned lamb carcases (n = 312) across three slaughter days. All three MiS devices met the AUS-MEAT accreditation thresholds, accurately predicting GR tissue depth 96.1-98.4% of the time. Between the different devices, the measurement accuracy was 99.4-100%, and within the same device, the measurement accuracy was 99.7-100%. Based on these results MiS achieved AUS-MEAT device accreditation as an objective technology to predict GR tissue depth.

Predicting lamb carcase composition from tissue depth measured at a single point with an ultrawide-band microwave scanner

This study evaluated the ability of portable ultra-wide band microwave system (MiS) to predict lamb carcase computed tomography (CT) determined composition % of fat, lean muscle and bone. Lamb carcases (n = 343) from 6 slaughter groups were MiS scanned at the C-site (45 mm from spine midline at the 12th /13th rib) prior to CT scanning to determine the proportion of fat, muscle and bone. A machine learning ensemble stacking technique was used to construct the MiS prediction equations. Predictions were pooled and divided in 5 groups stratified for each CT composition trait (fat, lean or bone%) and a k-fold cross validation (k = 5) technique was used to test the predictions. MiS predicted CT fat% with an average RMSEP of 2.385, R2 0.78, bias 0.156 and slope 0.095. The prediction of CT lean% had an average RMSEP of 2.146, R2 0.64, bias 0.172 and slope 0.117. CT bone% prediction had an average RMSEP of 0.990, R2 0.75, bias 0.051 and slope 0.090. Predictions for CT bone% met AUS-MEAT device accreditation error tolerances on the whole range of the dataset. Predictions for CT lean% and fat% met AUS-MEAT error tolerances on a constrained dataset.