Feasibility of 5-mm vs 2.5-mm width multileaf collimator in noncoplanar volumetric modulated arc stereotactic radiotherapy for multiple brain metastases

Plan quality assessment of modern radiosurgery technologies in the treatment of multiple brain metastases

Stereotactic radiosurgery (SRS) of multiple brain metastases has evolved over the last 40 years allowing centres to treat an increasing number of brain metastases in a single treatment fraction. HyperArcTMplanning optimisation technique is one such development that streamlines the treatment of multiple metastases with a single isocentre. Several studies have investigated the plan quality of HyperArc compared to CyberKnife or Gamma Knife, however there are limited number of studies that include all three modalities. It is the aim of this study to provide an assessment of plan quality between the three SRS platforms across ten patients with multiple brain metastases ranging from three to eight metastases per patient. Strict planning workflows were established to avoid bias towards any particular treatment platform. Plan quality was assessed through dose to organs at risk, Paddick conformity index (PCI), gradient index (GI), global efficiency index (Gη) and dose to normal brain tissue. Results from this study found mean PCI observed across Gamma Knife plans was significantly lower than HyperArc and CyberKnife. HyperArc plans observed significantly shorter beam-on times which were 10 to 20 times faster than CyberKnife and Gamma Knife plans. Gamma Knife and CyberKnife were found to produce plans with significantly superior GI, global efficiency index and the volume of healthy brain receiving greater than 12 Gy (V12Gy) when compared to HyperArc plans. Lesion volume was seen to influence the relative difference in dose metrics between systems. The study revealed that all three treatment modalities produced high quality plans for the SRS treatment of multiple brain metastases, each with respective benefits and limitations.

Monte Carlo-based independent dose verification of radiosurgery HyperArc plans

PURPOSE

To investigate the feasibility of using the free PRIMO Monte Carlo software for independent dose check of cranial SRS plans designed with the Varian HyperArc (HA) technique.

MATERIALS AND METHODS

In this study, the PRIMO Monte Carlo software v. 0.3.64.1800 was used with the phase-space files (v. 2, Feb. 27, 2013) provided by Varian for 6 MV flattening-filter-free (FFF) photon beams from a Varian TrueBeam linear accelerator (linac), equipped with a Millennium 120 multileaf collimator (MLC). This configuration was validated by comparing the percentage depth doses (PDDs), lateral profiles and relative output factors (OFs) simulated in a water phantom against measurements for field sizes from 1 × 1 to 40 × 40 cm². The agreement between simulated and experimental relative dose curves was evaluated using a global (G) gamma index analysis. In addition, the accuracy of PRIMO to model the MLC was investigated (dosimetric leaf gap, tongue and groove, leaf transmission and interleaf leakage). Thirty-five HA SRS plans computed in the Eclipse treatment planning system (TPS) were simulated in PRIMO. The Acuros XB algorithm v. 16.10 (dose to medium) was used in Eclipse. Sixty targets with diameters ranging from 6 to 33 mm were included. Agreement between the dose distributions given by Eclipse and PRIMO was evaluated in terms of 3D global gamma passing rates (GPRs) for the 2 %/2 mm criteria.

RESULTS

Average GPR greater than 95 % with the 2 %(G)/1 mm criteria were obtained over the PDD and profiles of each field size. Differences between PRIMO calculated and measured OFs were within 0.5 % in all fields, except for the 1 × 1 cm² with a discrepancy of 1.5 %. Regarding the MLC modeling in PRIMO, an agreement within 3 % was achieved between calculated and experimental doses. Excellent agreement between PRIMO and Eclipse was found for the 35 HA plans. The 3D global GPRs (2 %/2 mm) for the targets and external patient contour were 99.6 % ± 1.1 % and 99.8 % ± 0.5 %, respectively.

CONCLUSIONS

According to the results described in this study, the PRIMO Monte Carlo software, in conjunction with the 6X FFF Varian phase-space files, can be used as secondary dose calculation software to check stereotactic radiosurgery plans from Eclipse using the HyperArc technique.

Dynamic conformal arcs-based single-isocenter VMAT planning technique for radiosurgery of multiple brain metastases

Multiple small beamlets in the delivery of highly modulated single-isocenter HyperArc VMAT plan can lead to dose delivery errors associated with small-field dosimetry, which can be a major concern for stereotactic radiosurgery for multiple brain lesions. Herein, we describe and compare a clinically valuable dynamic conformal arc (DCA)-based VMAT (DCA-VMAT) approach for stereotactic radiosurgery of multiple brain lesions using flattening filter free beams to minimize this effect. Original single-isocenter HyperArc style VMAT and DCA-VMAT plans were created on 7 patients with 2 to 8 brain lesions (total 35 lesions) for 10 MV- flattening filter free beam. 20 Gy was prescribed to each lesion. For identical planning criteria, DCA-VMAT utilizes user-controlled field aperture shaper before VMAT optimization. Plans were evaluated for conformity and target coverage, low- and intermediate dose spillages to brain volume that received more than 30% (V30%) and 50% (V50%) of prescription dose. Additionally, mean brain dose, V8, V12 and maximal dose to adjacent organs-at-risk (OAR) including hippocampi were reported. Total monitor units, beam modulation factor, treatment delivery efficiency, and accuracy were recorded. Comparing with original VMAT, DCA-VMAT plans provided similar tumor dose, target coverage and conformity, yet tighter radio-surgical dose distribution with lower dose to normal brain V30% (p = 0.009), V50% (p = 0.05) and other OAR including lower dose to hippocampi. Lower total number of monitor units and smaller beam modulation factor reduced beam on time by 2.82 min (p < 0.001), on average (maximum up to 3.8 min). Beam delivery accuracy was improved by 8%, on average (p < 0.001) and maximum up to 13% in some cases for DCA-VMAT plans. This novel DCA-VMAT approach provided excellent plan quality, reduced dose to normal brain, and other OAR while significantly reducing beam-on time for radiosurgery of multiple brain lesions-improving patient compliance and clinic workflow. It also provided less MLC modulation through the targets-potentially minimizing small field dosimetry errors as demonstrated by quality assurance results. Incorporating DCA-based VMAT optimization in HyperArc module for radiosurgery of multiple brain lesions merits future investigation.