A novel strategy for creating a large amount of engineered fat tissue with an axial vascular pedicle and a prefabricated scaffold

Characterization and assessment of the genotoxicity and biocompatibility of poly (hydroxybutyrate) and norbixin membranes

Purpose

To synthesize and characterize poly(hydroxybutyrate) (PHB) and norbixin membranes to evaluate them for genotoxicity in rats and wound healing in mice by histological staining.

Methods

For the evaluation of genotoxicity, male rats ( Rattus novegicus ) were divided into three groups (n= 5): 5% PHB/Norbixin membrane introduced into the peritoneum by laparotomy; B – negative control; C – positive control (intraperitoneal dose of cyclophosphamide 50 mg/kg). For the evaluation of biocompatibilty, a cutaneous wound was induced on the back of males mice ( Mus musculus ) divided into two experimental treatment groups: control and membrane that underwent euthanasia after 7 and 14 days treatment. Statistical analysis ware made by One Way Anova post hoc Tukey Test (p<0.05).

Results

Regarding the incidence of polychromatic erythrocytes, there was no difference between negative control and 5% PHB/Norbixin membrane; however, when compared to the positive control represented by cyclophosphamide, there was a significant difference (p <0.001). As for DNA damage, the changes induced in the first 4h were repaired in 24h. In addition, the membrane was effective in abbreviating the inflammatory process and served as a scaffold due to the stimulus to reepithelialization mainly on the 7 days of treatment.

Conclusion

The non-genotoxic PHB/Norbixin 5% membrane presented promising results that suggest its effectiveness as a guide for tissue regeneration given its biocompatibility.

Release of the Non-Steroidal Anti-Inflammatory Drug Flufenamic Acid by Multiparticulate Delivery Systems Promotes Adipogenic Differentiation of Adipose-Derived Stem Cells

Engineered tissue-like structures often instigate an inflammatory response in the host that can inhibit wound healing and ultimately lead to the rejection of the implant. In our previous study, we have characterized the properties and biocompatibility of novel multiparticulate drug delivery systems (MDDS), based on collagen matrix with gradual release of anti-inflammatory drug flufenamic acid, we evaluated their anti-inflammatory potential and demonstrated their efficiency against burns and soft tissue lesions. In addition to these results, FA was previously described as a stimulant for adipogenesis, therefore we hypothesized that MDDS might also be appropriate for adipose tissue engineering. After the cell-scaffold constructs were obtained, cell morphology, adhesion and spreading on the systems were highlighted by scanning electron microscopy, immunostaining and confocal microscopy. The effect of FA-enriched materials on adipogenesis was evaluated at gene and protein level, by RT-qPCR, confocal microscopy and immunohistochemistry. Our current work indicates that flufenamic acid plays a beneficial role in adipocyte differentiation, with a direct effect upon the gene and protein expression of important early and late markers of adipogenesis, such as PPARγ2 and perilipin.

Novel Assay Analyzing Tropism between Adipose-Derived Stem Cells and Breast Cancer Cells Reveals a Low Oncogenic Response

Introduction

In the surgical world of breast cancer reconstruction, fat grafting is commonly viewed as an oncogenic risk. Scientific studies add confusion, given the stark lack of clinical evidence suggesting pro-oncogenic links. Typically, classic migration assays (e.g., Boyden chamber) between adipose-derived stem cells and breast cancer cells define this cell relationship as pro-oncogenic.

Objective

We sought to develop a new migration model which better explains existing clinical data.

Methods

Silicon chambers were used to seed isolated populations of cells simultaneously in culture dish. Once cells had adhered, chambers were removed and cells were allowed to follow natural trophic cues. Multiple permutations of MDA-MB-231, MCF-7, HS-27, and ASCs were engineered. Cells were stained with MitoTracker for fluorescent visualization. A human cytokine array (RayBiotech) was performed on the media of migrating assays. Cellular tropism and blot intensity were quantitatively measured in Image J.

Results

An in vitro model was successfully constructed where ASCs reproducibly and freely migrated. Cytokine arrays reveal higher levels of IL-6 and CCL2 in the media of Boyden chambers containing ASCs and MDA-MB-231, compared to the novel assay, comprised of the same cell numbers, types, and incubation times.

Conclusion

These data collectively show for the first time the attraction of ASCs to malignant breast cancer cells; a phenomenon which many ASC studies infer. The cytokine profile of the novel system described is less oncogenic than the commonly described Boyden chamber. These data integrate better into the clinical data, which fail to link cancer recurrence with fat grafting.

[Construction of injectable tissue engineered adipose tissue with fibrin glue scaffold and human adipose-derived stem cells transfected by lentivirus vector expressing hepatocyte growth factor]

Objective

To discuss the possibility of constructing injectable tissue engineered adipose tissue, and to provide a new approach for repairing soft tissue defects.

Methods

Human adipose-derived stem cells (hADSCs) were extracted from the lipid part of human liposuction aspirate by enzymatic digestion and identified by morphological observation, flow cytometry, and adipogenic induction. The hADSCs underwent transfection by lentivirus vector expressing hepatocyte growth factor and green fluorescent protein (HGF-GFP-LVs) of different multiplicity of infection (MOI, 10, 30, 50, and 100), the transfection efficiency was calculated to determine the optimum MOI. The hADSCs transfected by HGF-GFP-LVs of optimal MOI and being adipogenic inducted were combined with injectable fibrin glue scaffold, and were injected subcutaneously into the right side of the low back of 10 T-cell deficiency BALB/c female nude mice (transfected group); non-HGF-GFP-LVs transfected hADSCs (being adipogenic inducted) combined with injectable fibrin glue scaffold were injected subcutaneously into the left side of the low back (untransfected group); and injectable fibrin glue scaffold were injected subcutaneously into the middle part of the neck (blank control group); 0.4 mL at each point. Twelve weeks later the mice were killed and the implants were taken out. Gross observation, wet weight measurement, HE staining, GFP fluorescence labeling, and immunofluorescence staining were performed to assess the in vivo adipogenic ability of the seed cells and the neovascularization of the grafts.

Results

The cultured cells were identified as hADSCs. Poor transfection efficiency was observed in MOI of 10 and 30, the transfection efficiency of MOI of 50 and 100 was more than 80%, so the optimum MOI was 50. Adipose tissue-like new-born tissues were found in the injection sites of the transfected and untransfected groups after 12 weeks of injection, and no new-born tissues was found in the blank control group. The wet-weight of new-born tissue in the transfected group [(32.30±4.06) mg] was significantly heavier than that of the untransfected group [(25.27±3.94) mg] ( t=3.929, P=0.001). The mature adipose cells in the transfected group [(126.93±5.36) cells/field] were significantly more than that in the untransfected group [(71.36±4.52) cells/field] ( t=30.700, P=0.000). Under fluorescence microscopy, some of the single cell adipocytes showed a network of green fluorescence, indicating the presence of GFP labeled exogenous hADSCs in the tissue. The vascular density of new-born tissue of the transfected group [(16.37±2.76)/field] was significantly higher than that of the untransfected group [(9.13±1.68)/field] ( t=8.678, P=0.000).

Conclusion

The hADSCs extracted from the lipid part after liposuction can be used as seed cells. After HGF-GFP-LVs transfection and adipose induction, the hADSCs combined with injectable fibrin glue scaffold can construct mature adipose tissue in vivo, which may stimulate angiogenesis, and improve retention rate of new-born tissue.

Adipose-Derived Stem Cells in Novel Approaches to Breast Reconstruction: Their Suitability for Tissue Engineering and Oncological Safety

Adipose-derived stem cells (ADSCs) are rapidly becoming the gold standard cell source for tissue engineering strategies and hold great potential for novel breast reconstruction strategies. However, their use in patients with breast cancer is controversial and their oncological safety, particularly in relation to local disease recurrence, has been questioned. In vitro, in vivo, and clinical studies using ADSCs report conflicting data on their suitability for adipose tissue regeneration in patients with cancer. This review aims to provide an overview of the potential role for ADSCs in breast reconstruction and to examine the evidence relating to the oncologic safety of their use in patients with breast cancer.

Tissue Engineering by Intrinsic Vascularization in an In Vivo Tissue Engineering Chamber

In reconstructive surgery, there is a clinical need for an alternative to the current methods of autologous reconstruction which are complex, costly and trade one defect for another. Tissue engineering holds the promise to address this increasing demand. However, most tissue engineering strategies fail to generate stable and functional tissue substitutes because of poor vascularization. This paper focuses on an in vivo tissue engineering chamber model of intrinsic vascularization where a perfused artery and a vein either as an arteriovenous loop or a flow-through pedicle configuration is directed inside a protected hollow chamber. In this chamber-based system angiogenic sprouting occurs from the arteriovenous vessels and this system attracts ischemic and inflammatory driven endogenous cell migration which gradually fills the chamber space with fibro-vascular tissue. Exogenous cell/matrix implantation at the time of chamber construction enhances cell survival and determines specificity of the engineered tissues which develop. Our studies have shown that this chamber model can successfully generate different tissues such as fat, cardiac muscle, liver and others. However, modifications and refinements are required to ensure target tissue formation is consistent and reproducible. This article describes a standardized protocol for the fabrication of two different vascularized tissue engineering chamber models in vivo.

Development of Synthetic and Natural Materials for Tissue Engineering Applications Using Adipose Stem Cells

Adipose stem cells have prominent implications in tissue regeneration due to their abundance and relative ease of harvest from adipose tissue and their abilities to differentiate into mature cells of various tissue lineages and secrete various growth cytokines. Development of tissue engineering techniques in combination with various carrier scaffolds and adipose stem cells offers great potential in overcoming the existing limitations constraining classical approaches used in plastic and reconstructive surgery. However, as most tissue engineering techniques are new and highly experimental, there are still many practical challenges that must be overcome before laboratory research can lead to large-scale clinical applications. Tissue engineering is currently a growing field of medical research; in this review, we will discuss the progress in research on biomaterials and scaffolds for tissue engineering applications using adipose stem cells.