A novel method for fabricating polyelectrolyte complex/inorganic nanohybrid membranes with high isopropanol dehydration performance

Effect of Nanofillers on Properties and Pervaporation Performance of Nanocomposite Membranes: A Review

In recent years, a well-known membrane-based process called pervaporation (PV), has attracted remarkable attention due to its advantages for selective separation of a wide variety of liquid mixtures. However, some restrictions of polymeric membranes have led to research studies on developing membranes for efficient separation in the PV process. Recent studies have focused on preparation of nanocomposite membranes as an effective method to improve both selectivity and permeability of polymeric membranes. The present study provides a review of PV nanocomposite membranes for various applications. In this review, recent developments in the field of nanocomposite membranes, including the fabrication methods, characterization, and PV performance, are summarized.

Recent developments in polymeric nano-based separation membranes

Polymeric nanomaterials, which have tuneable chemical structures, versatile functionalities, and good compatibility with polymeric matrices, have attracted increasing interest from researchers for the construction of polymeric nano-based separation membranes. With their distinctive nanofeatures, polymeric nano-based membranes show great promise in overcoming bottlenecks in polymer membranes, namely, the trade-off between permeability and selectivity, low stability, and fouling issues. Accordingly, recent studies have focused on tuning the structures and tailoring the surface properties of polymeric nano-based membranes via exploitation of membrane fabrication techniques and surface modification strategies, with the objective of pushing the performance of polymeric nano-based membranes to a new level. In this review, first, the approaches for fabricating polymeric nano-based mixed matrix membranes and homogeneous membranes are summarized, such as surface coating, phase inversion, interfacial polymerization, and self-assembly methods. Next, the manipulation strategies of membrane surface properties, namely, the hydrophilicity/hydrophobicity, charge characteristics, and surface roughness, and interior microstructural properties, namely, the pore size and content, channel construction and regulation, are comprehensively discussed. Subsequently, the separation performances of liquid ions/molecules and gas molecules through polymeric nano-based membranes are systematically reported. Finally, we conclude this review with an overview of various unsolved scientific and technical challenges that are associated with new opportunities in the development of advanced polymeric nano-based membranes.

Recent Advances of Pervaporation Separation in DMF/H2O Solutions: A Review

N,N-dimethylformamide (DMF) is a commonly-used solvent in industry and pharmaceutics for extracting acetylene and fabricating polyacrylonitrile fibers. It is also a starting material for a variety of intermediates such as esters, pyrimidines or chlordimeforms. However, after being used, DMF can be form 5–25% spent liquors (mass fraction) that are difficult to recycle with distillation. From the point of view of energy-efficiency and environment-friendliness, an emergent separation technology, pervaporation, is broadly applied in separation of azeotropic mixtures and organic–organic mixtures, dehydration of aqueous–organic mixtures and removal of trace volatile organic compounds from aqueous solutions. Since the advances in membrane technologies to separate N,N-dimethylformamide solutions have been rarely reviewed before, hence this review mainly discusses the research progress about various membranes in separating N,N-dimethylformamide aqueous solutions. The current state of available membranes in industry and academia, and their potential advantages, limitations and applications are also reviewed.

Double-Crosslinked GO Interlayer Framework as a Pervaporation Hybrid Membrane with High Performance

Graphene oxide (GO), as a two-dimensional structure material, has attracted widespread attention in the field of molecule sieving. However, GO-based membranes usually exhibit undesirable separation performance because the microstructure of GO is difficult to adjust. Herein, a novel double-crosslinking strategy for tuning the interlayer spacing of GO is reported. The hybrid membrane fabricated by the double-crosslinking strategy was used for pervaporation (PV) dehydration of isopropanol. To achieve high-performance of the PV hybrid membranes, the effects of operating cycles, chitosan concentration, and GO concentration were systematically investigated. The PV hybrid membranes were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, water contact angle measurement, and scanning electron microscopy. The results demonstrate that the interlayer of GO can be adjusted successfully by the double-crosslinking strategy. The fabricated hybrid membrane containing 0.1 wt % GO exhibited excellent performance with a flux of 4391 g/m2h and a separation factor of 1491, which indicated that the double-crosslinking strategy may extend the applications of GO in the field of membrane separation.

Recent Advances in the Fabrication of Membranes Containing "Ion Pairs" for Nanofiltration Processes

In the face of serious environmental pollution and water scarcity problems, the membrane separation technique, especially high efficiency, low energy consumption, and environmental friendly nanofiltration, has been quickly developed. Separation membranes with high permeability, good selectivity, and strong antifouling properties are critical for water treatment and green chemical processing. In recent years, researchers have paid more and more attention to the development of high performance nanofiltration membranes containing “ion pairs”. In this review, the effects of “ion pairs” characteristics, such as the super-hydrophilicity, controllable charge character, and antifouling property, on nanofiltration performances are discussed. A systematic survey was carried out on the various approaches and multiple regulation factors in the fabrication of polyelectrolyte complex membranes, zwitterionic membranes, and charged mosaic membranes, respectively. The mass transport behavior and antifouling mechanism of the membranes with “ion pairs” are also discussed. Finally, we present a brief perspective on the future development of advanced nanofiltration membranes with “ion pairs”.

Polymeric Nanocomposite Membranes for Next Generation Pervaporation Process: Strategies, Challenges and Future Prospects

Pervaporation (PV) has been considered as one of the most active and promising areas in membrane technologies in separating close boiling or azeotropic liquid mixtures, heat sensitive biomaterials, water or organics from its mixtures that are indispensable constituents for various important chemical and bio-separations. In the PV process, the membrane plays the most pivotal role and is of paramount importance in governing the overall efficiency. This article evaluates and collaborates the current research towards the development of next generation nanomaterials (NMs) and embedded polymeric membranes with regard to its synthesis, fabrication and application strategies, challenges and future prospects.