Influence of polyanion type and cationic counter ion on the SRNF performance of polyelectrolyte membranes

Influence of structurally and morphologically different nanofillers on the performance of polysulfone membranes modified by the assembled PDDA/PAMPS-based hybrid multilayer thin film

A highly efficient nanofiltration membrane should exhibit high separation performance in removing divalent salts and organic solutes, as well as high permeation to meet practical separation and purification applications in aqueous media. Here, we designed a series of hybrid multilayer thin film membranes filled with the structurally and morphologically different nanofillers such as hexagonal boron nitride (HBN) nanosheets and metal-organic framework (MOF) nanoparticles, consisting of 3 and 6 layer pairs of polyelectrolyte through the layer-by-layer self-assembly technique (LBL) and characterized them in terms of dye and salt separation, as well as permeation. The rejection performance and permeability of the designed membranes manifested that HBN nanosheets were more effective than MOF nanoparticles in achieving a high-performance membrane. As compared to the bare multilayer thin film membrane, the addition of HBN nanosheets within the negatively-charged layers of the multilayer thin film membrane consisting of 6 bilayers resulted in good retention of up to 93% and 92% for acid blue (ACB) and bromophenol blue (BPB) dye molecules, respectively. Besides, this membrane exhibited 60% and 45% improvement in the water flux for ACB and BPB solutions, respectively, while the rejection of the sulfate ions maintained an acceptable value around 78%. Furthermore, it was found that this HBN-embedded hybrid multilayer membrane had superior potential for the removal of coherent foulant compared to all samples.

Advances and Applications of Hollow Fiber Nanofiltration Membranes: A Review

Hollow fiber nanofiltration (NF) membranes have gained increased attention in recent years, partly driven by the availability of alternatives to polyamide-based dense separation layers. Moreover, the global market for NF has been growing steadily in recent years and is expected to grow even faster. Compared to the traditional spiral-wound configuration, the hollow fiber geometry provides advantages such as low fouling tendencies and effective hydraulic cleaning possibilities. The alternatives to polyamide layers are typically chemically more stable and thus allow operation and cleaning at more extreme conditions. Therefore, these new NF membranes are of interest for use in a variety of applications. In this review, we provide an overview of the applications and emerging opportunities for these membranes. Next to municipal wastewater and drinking water processes, we have put special focus on industrial applications where hollow fiber NF membranes are employed under more strenuous conditions or used to recover specific resources or solutes.

Recent Advances in the Fabrication of Membranes Containing "Ion Pairs" for Nanofiltration Processes

In the face of serious environmental pollution and water scarcity problems, the membrane separation technique, especially high efficiency, low energy consumption, and environmental friendly nanofiltration, has been quickly developed. Separation membranes with high permeability, good selectivity, and strong antifouling properties are critical for water treatment and green chemical processing. In recent years, researchers have paid more and more attention to the development of high performance nanofiltration membranes containing “ion pairs”. In this review, the effects of “ion pairs” characteristics, such as the super-hydrophilicity, controllable charge character, and antifouling property, on nanofiltration performances are discussed. A systematic survey was carried out on the various approaches and multiple regulation factors in the fabrication of polyelectrolyte complex membranes, zwitterionic membranes, and charged mosaic membranes, respectively. The mass transport behavior and antifouling mechanism of the membranes with “ion pairs” are also discussed. Finally, we present a brief perspective on the future development of advanced nanofiltration membranes with “ion pairs”.

The Selectivity Challenge in Organic Solvent Nanofiltration: Membrane and Process Solutions

Recent development of organic solvent nanofiltration (OSN) materials has been overwhelmingly directed toward tight membranes with ultrahigh permeance. However, emerging research into OSN applications is suggesting that improved separation selectivity is at least as important as further increases in membrane permeance. Membrane solutions are being proposed to improve selectivity, mostly by exploiting solute/solvent/membrane interactions and by fabricating tailored membranes. Because achieving a perfect separation with a single membrane stage is difficult, process engineering solutions, such as membrane cascades, are also being advocated. Here we review these approaches to the selectivity challenge, and to clarify our analysis, we propose a selectivity figure of merit that is based on the permselectivity between the two solutes undergoing separation as well as the ratio of their molecular weights.

Hyper-Cross-Linked Additives that Impede Aging and Enhance Permeability in Thin Polyacetylene Films for Organic Solvent Nanofiltration

Membrane materials with high permeability to solvents while rejecting dissolved contaminants are crucial to lowering the energy costs associated with liquid separations. However, the current lack of stable high-permeability materials require innovative engineering solutions to yield high-performance, thin membranes using stable polymers with low permeabilities. Poly[1-(trimethylsilyl)-1-propyne] (PTMSP) is one of the most permeable polymers but is extremely susceptible to physical aging. Despite recent developments in anti-aging polymer membranes, this research breakthrough has yet to be demonstrated on thin PTMSP films supported on porous polymer substrates, a crucial step toward commercializing anti-aging membranes for industrial applications. Here we report the development of scalable, thin film nanocomposite membranes supported on polymer substrates that are resistant to physical aging while having high permeabilities to alcohols. The selective layer is made up of PTMSP and nanoporous polymeric additives. The nanoporous additives provide additional passageways to solvents, enhancing the high permeability of the PTMSP materials further. Through intercalation of polyacetylene chains into the sub-nm pores of organic additives, physical aging in the consequent was significantly hindered in continuous long-term operation. Remarkably we also demonstrate that the additives enhance both membrane permeability and rejection of dissolved contaminants across the membranes, as ethanol permeability at 5.5 × 10^-6 L m m^-2 h^-1 bar^-1 with 93% Rose Bengal (1017.6 g mol^-1) rejection, drastically outperforming commercial and state-of-the-art membranes. These membranes can replace energy-intensive separation processes such as distillation, lowering operation costs in well-established pharmaceutical production processes.

One-Step Transformation from Hierarchical-Structured Superhydrophilic NF Membrane into Superhydrophobic OSN Membrane with Improved Antifouling Effect

The hierarchical-structured superhydrophilic poly(ethylenimine)/poly(acrylic acid) (PEI/PAA)calcium silicate hydrate (CSH) multilayered membranes (PEI/PAA-CSH)n were prepared as aqueous nanofiltration (NF) membrane, and then they were transformed into superhydrophobic organic solvent nanofiltration (OSN) membranes by one-step modification of trimethylperfluorinatedsilane (PFTS). Investigation on surface structures and properties of these multilayered membranes (PEI/PAA-CSH)n indicated that the hierarchical-structured (PEI/PAA-CSH)n multilayered membrane produced by in situ incorporation of CSH aggregates into PEI/PAA multilayers facilitated its one-step transformation from superhydrophilicity into superhydrophobicity. Both of the superwetting membranes showed better nanofiltration performances for retention of dyes of water and ethanol solution, respectively. Moreover, the long-term performance and antifouling behaviors, investigated by retention of methyl blue (MB), bovine serum albumin (BSA), and humic acid (HA) aqueous water solution and nonaqueous ethanol solution indicated that both of the superhydrophilic and superhydrophobic membrane showed higher stability and excellent antifouling property.

Layer-by-layer modification of cation exchange membranes controls ion selectivity and water splitting

The present study investigates the possibility of inducing monovalent ion permselectivity on standard cation exchange membranes, by the layer-by-layer (LbL) assembly of poly(ethyleneimine) (PEI)/poly(styrenesulfonate) (PSS) polyelectrolyte multilayers. Coating of the (PEI/PSS)N LbL multilayers on the CMX membrane caused only moderate variation of the ohmic resistance of the membrane systems. Nonetheless, the polyelectrolyte multilayers had a substantial influence on the monovalent ion permselectivity of the membranes. Permselectivity comparable to that of a commercial monovalent-ion-permselective membrane was obtained with only six bilayers of polyelectrolytes, yet with significantly lower energy consumption per mole of Na(+) ions transported through the membranes. The monovalent ion permselectivity stems from an increased Donnan exclusion for divalent ions and hydrophobization of the surface of the membranes concomitant to their modification. Double-layer capacitance obtained from impedance measurements shows a qualitative indication of the divalent ion repulsion of the membranes. At overlimiting current densities, water dissociation occurred at membranes with PEI-terminated layers and increased with the number of layers, while it was nearly absent for the PSS-terminated layers. Hence, LbL layers allow switching on and turning off water splitting at the surface of ion exchange membranes.

Efficacy of CNT-bound polyelectrolyte membrane by spray-assisted layer-by-layer (LbL) technique on water purification

This study demonstrates anti-fouling properties of surface-modified polyethersulfone composite ultrafiltration membranes prepared by a spray-assisted layer-by-layer technique.