Effects of neutralization with Et3Al on structure and properties in sulfonated styrenic pentablock copolymers

Sulfonated Pentablock Copolymer (NexarTM) for Water Remediation and Other Applications

This review focuses on the use of a sulfonated pentablock copolymer commercialized as NexarTM in water purification applications. The properties and the use of sulfonated copolymers, in general, and of NexarTM, in particular, are described within a brief reference focusing on the problem of different water contaminants, purification technologies, and the use of nanomaterials and nanocomposites for water treatment. In addition to desalination and pervaporation processes, adsorption and photocatalytic processes are also considered here. The reported results confirm the possibility of using NexarTM as a matrix for embedded nanoparticles, exploiting their performance in adsorption and photocatalytic processes and preventing their dispersion in the environment. Furthermore, the reported antimicrobial and antibiofouling properties of NexarTM make it a promising material for achieving active coatings that are able to enhance commercial filter lifetime and performance. The coated filters show selective and efficient removal of cationic contaminants in filtration processes, which is not observed with a bare commercial filter. The UV surface treatment and/or the addition of nanostructures such as graphene oxide (GO) flakes confer NexarTM with coating additional functionalities and activity. Finally, other application fields of this polymer are reported, i.e., energy and/or gas separation, suggesting its possible use as an efficient and economical alternative to the more well-known Nafion polymer.

Incorporation of Metallic Species into Midblock-Sulfonated Block Ionomers

Block ionomers can, in the same fashion as their neutral block copolymer analogs, microphase-order into various nanoscale morphologies. The added benefit of a copolymer possessing a charged species is that the resultant block ionomer becomes amphiphilic and capable of imbibing polar liquids, including water. This characteristic facilitates incorporation of metallic species into the soft nanostructure for a wide range of target applications. In this study, the nonpolar and polar constituents of solvent-templated midblock-sulfonated block ionomers (SBIs) are first selectively metallated for complementary morphological analysis. Next, four different salts, with cationic charges ranging from +1 to +3, are introduced into three hydrated SBIs varying in their degree of sulfonation (DOS), and cation uptake is measured as a function of immersion time. These results indicate that uptake generally increases with increasing salt concentration, cationic charge, and specimen DOS. Swelling and nanoindentation measurements conducted at ambient temperature demonstrate that water uptake decreases, while the surface modulus increases, with increasing cationic charge. Chemical spectra acquired from energy-dispersive X-ray spectroscopy (EDS) confirm the presence of each of the ion-exchanged species, and corresponding EDS chemical maps reveal that the spatial distribution of these species is relatively uniform throughout the block ionomer films.

Soft nanoparticles: nano ionic networks of associated ionic polymers

Directing the formation of nanostructures that serve as building blocks of membranes presents an immense step towards engineering controlled polymeric ion transport systems. Using the exquisite atomic detail captured by molecular dynamics simulations, we follow the assembly of a co-polymer that consists of polystyrene sulfonate tethered symmetrically to hydrophobic blocks, realizing a new type of long lived solvent-responsive soft nanoparticle.

Highly effective and reusable sulfonated pentablock copolymer nanocomposites for water purification applications

Sulfonated pentablock copolymer nanocomposites loaded with TiO₂ or graphene oxide show their effectiveness in water purification applications.

Solvent controlled ion association in structured copolymers: Molecular dynamics simulations in dilute solutions

Tailoring the nature of individual segments within ion containing block co-polymers is one critical design tool to achieve desired properties. The local structure including the size and distribution of the ionic blocks, as well as the long range correlations, are crucial for their transport ability. Here, we present molecular dynamics simulations on the effects of varying the concentrations of the ionizable groups on the conformations of pentablock ionomer that consist of a center block of ionic sulfonated styrene tethered to polyethylene and terminated by a bulky substituted styrene in dilute solutions. Sulfonation fractions f (0 ≤ f ≤ 0.55), spanning the range from ionomer to polyelectrolytes, were studied. Results for the equilibrium conformation of the chains in water and a 1:1 mixture of cyclohexane and heptane are compared to that in implicit poor solvents with dielectric constants ε = 1.0 and 77.73. In water, the pentablock collapses with the sulfonated groups on the outer surface. As f increases, the ionic, center block increasingly segregates from the hydrophobic regions. In the 1:1 mixture of cyclohexane and heptane, the flexible blocks swell, while the center ionic block collapses for f > 0. For f = 0, all blocks swell. In both implicit poor solvents, the pentablock collapses into a nearly spherical shape for all f. The sodium counterions disperse widely throughout the simulation cell for both water and ε = 77.73, whereas for ε = 1.0 and mixture of cyclohexane and heptane, the counterions largely condense onto the collapsed pentablock.

Novel nanofiltration membranes consisting of a sulfonated pentablock copolymer rejection layer for heavy metal removal

Facing stringent regulations on wastewater discharge containing heavy metal ions, various industries are demanding more efficient and effective treatment methods. Among the methods available, nanofiltration (NF) is a feasible and promising option. However, the development of new membrane materials is constantly required for the advancement of this technology. This is a report of the first attempt to develop a composite NF membrane comprising a molecularly designed pentablock copolymer selective layer for the removal of heavy metal ions. The resultant NF membrane has a mean effective pore diameter of 0.50 nm, a molecular weight cutoff of 255 Da, and a reasonably high pure water permeability (A) of 2.4 LMH/bar. The newly developed NF membrane can effectively remove heavy metal cations such as Pb(2+), Cd(2+), Zn(2+), and Ni(2+) with a rejection of >98.0%. On the other hand, the membrane also shows reasonably high rejections toward anions such as HAsO4(2-) (99.9%) and HCrO4(-) (92.3%). This performance can be attributed to (1) the pentablock copolymer's unique ability to form a continuous water transport passageway with a defined pore size and (2) the incorporation of polyethylenimine as a gutter layer between the selective layer and the substrate. To the best of our knowledge, this is the first reported NF membrane comprising this pentablock copolymer as the selective material. The promising preliminary results achieved in this study provide a useful platform for the development of new NF membranes for heavy metal removal.

The development of novel Nexar block copolymer/Ultem composite membranes for C2-C4 alcohols dehydration via pervaporation

Novel composite membranes comprising sulfonated styrenic Nexar pentablock copolymers were developed by dip-coating on poly(ether imide) hollow fibers for pervaporation dehydration of C2-C4 alcohols. The advantages of using block copolymers as the selective layer are (1) their effectiveness to synergize the physicochemical properties of different chemical and structural moieties and (2) tunable nanoscale morphology and nanostructure via molecular engineering. To achieve high-performance composite membranes, the effects of coating time, ion exchange capacity (IEC) of the copolymer, and solvent systems for coating were investigated. It is revealed that a minimum coating time of 30 s is needed for the formation of a continuous and less-defective top layer. A higher IEC value results in a membrane with a higher flux and lower separation factor because of enhanced hydrophilicity and stretched chain conformation. Moreover, the composite membranes prepared from hexane/ethanol mixtures show higher separation factors and lower fluxes than those from the hexane solvent owing to microdomain segregation induced by ethanol and a smooth and dense top selective layer. These hypotheses were verified by atomic force microscopy and positron annihilation spectroscopy. The newly developed composite membranes demonstrate impressive separation performance with fluxes exceeding 2 kg/m(2) h and separation factors more than 200 for isopropyl alcohol and n-butanol dehydration from 85/15 wt % alcohol/water feed mixtures at 50 °C.

Highly permeable double-skinned forward osmosis membranes for anti-fouling in the emulsified oil-water separation process

Forward osmosis (FO) has attracted wide attention in recent years. However, the FO performance may be restricted due to internal concentration polarization (ICP) and fast fouling propensity that occurs in the membrane sublayer. Particularly, these problems significantly affect the membrane performance when treating highly contaminated oily wastewater. Recently, double-skinned flat sheet cellulose acetate (CA) membranes consisting of two selective skins via the phase inversion method have demonstrated less ICP and fouling propensity over typical single-skinned membranes. However, these membranes exhibit low water fluxes of <12 LMH under 2 M NaCl draw solution. Therefore, a novel double-skinned FO membrane with a high water flux has been aimed for in this study for emulsified oil-water treatment. The double-skinned FO membrane comprises a fully porous sublayer sandwiched between (i) a truly dense skin for salt rejection and (ii) a fairly loose dense skin for emulsified oil particle rejection. The former dense skin is a polyamide synthesized via interfacial polymerization, while the latter one is a self-assembled sulfonated pentablock copolymer (Nexar copolymer) layer. The resultant double-skinned membrane exhibits a high water flux of 17.2 LMH and a low reverse salt transport of 4.85 gMH using 0.5 M NaCl as the draw solution and DI water as the feed. The double-skinned membrane outperforms the single-skinned membrane with much lower fouling propensity for emulsified oil-water separation.