Potential of mechanical cleaning of membranes from a membrane bioreactor

Unveiling the spatiotemporal dynamics of membrane fouling: A focused review on dynamic fouling characterization techniques and future perspectives

Membrane technology has emerged as a crucial method for obtaining clean water from unconventional sources in the face of water scarcity. It finds wide applications in wastewater treatment, advanced treatment, and desalination of seawater and brackish water. However, membrane fouling poses a huge challenge that limits the development of membrane-based water treatment technologies. Characterizing the dynamics of membrane fouling is crucial for understanding its development, mechanisms, and effective mitigation. Instrumental techniques that enable in situ or real-time characterization of the dynamics of membrane fouling provide insights into the temporal and spatial evolution of fouling, which play a crucial role in understanding the fouling mechanism and the formulation of membrane control strategies. This review consolidates existing knowledge about the principal advanced instrumental analysis technologies employed to characterize the dynamics of membrane fouling, in terms of membrane structure, morphology, and intermolecular forces. Working principles, applications, and limitations of each technique are discussed, enabling researchers to select appropriate methods for their specific studies. Furthermore, prospects for the future development of dynamic characterization techniques for membrane fouling are discussed, underscoring the need for continued research and innovation in this field to overcome the challenges posed by membrane fouling.

Insights into the fouling layer of flat-sheet membrane and its development in an integrated oxidation ditch-membrane bioreactor

This work revealed the characteristics of fouling layer on the flat-sheet membranes and its development in an integrated oxidation-ditch membrane bioreactor. During the operation period (130 days), the reactor performed very well in removing pollutants. As the operation proceeded, membrane fouling occurred on the flat-sheet membranes and trans-membrane pressure showed a cyclical variation. The experimental results showed that the process of membrane fouling appeared successively in two different structures: biofilm (BF) and sludge fouling (SF). The substances causing membrane fouling were mainly organic foulants and a small amount of inorganic metal compounds, especially the protein-like and fulvic acid-like substances in loosely bound extracellular polymeric substances (LB-EPS). The analysis of microbial communities revealed that SF and BF had very different microbial properties. Although most membrane foulants could be removed by physical and chemical cleaning methods, the protein-like and fulvic acid-like substances in BF were contribute much to causing irreversible membrane fouling.

Recent Mitigation Strategies on Membrane Fouling for Oily Wastewater Treatment

The discharge of massive amounts of oily wastewater has become one of the major concerns among the scientific community. Membrane filtration has been one of the most used methods of treating oily wastewater due to its stability, convenience handling, and durability. However, the continuous occurrence of membrane fouling aggravates the membrane's performance efficiency. Membrane fouling can be defined as the accumulation of various materials in the pores or surface of the membrane that affect the permeate's quantity and quality. Many aspects of fouling have been reviewed, but recent methods for fouling reduction in oily wastewater have not been explored and discussed sufficiently. This review highlights the mitigation strategies to reduce membrane fouling from oily wastewater. We first review the membrane technology principle for oily wastewater treatment, followed by a discussion on different fouling mechanisms of inorganic fouling, organic fouling, biological fouling, and colloidal fouling for better understanding and prevention of membrane fouling. Recent mitigation strategies to reduce fouling caused by oily wastewater treatment are also discussed.

A review on the applications of ultrasonic technology in membrane bioreactors

Membrane bioreactors (MBRs) have received increasing attention in the field of wastewater treatment in recent years. However, membrane fouling is the main problem of MBRs, limiting their widespread and large applications. Membrane cleaning methods can be mainly classified into four types including chemical, physical, physico-chemical and biological clean the fouled membrane. In recent years, ultrasonication has been reported as a promising cleaning technique for the membranes fouled in MBRs. Ultrasonic irradiation can clean the fouled membrane by creating important physical phenomena including microjets, microstreams and shock waves. Moreover, the ultrasonic method can be combined with other cleaning methods e.g. chemical cleaning and backwashing in order to improve the cleaning efficiency. It should be noted that the application of ultrasonic in the MBR system is not limited to the cleaning of membrane. The pretreatment of the wastewater by ultrasonic irradiation or ultrasound coupled with other methods, e.g. ozonation, prior to MBR system, can decrease the organic loading of the wastewater and subsequently postpone the fouling of the membrane. This paper critically reviews the recent advances in the applications of ultrasound in MBR systems. Emerging issues associated with application of on-line ultrasound and also hybrid on-line ultrasound for controlling the membrane fouling in MBR systems are critically reviewed. Moreover, application of the ultrasound in ex-situ form for cleaning the fouled membranes and pretreatment of wastewater prior to the MBR system is discussed.

Tuning anti-adhesion ability of membrane for a membrane bioreactor by thermodynamic analysis

Developing strategies that allow tuning anti-adhesion ability of membranes in membrane bioreactors (MBRs) is of primary interest in membrane fouling research. In this study, interaction energies between foulants and membrane in three different interaction scenarios were systematically assessed based on thermodynamic methods. It was found that, membrane surface electron donor tension (γ(-)) rather than surface hydrophilicity was a more reliable indicator to predict adsorptive fouling. The interaction energy would be continuously repulsive in the initial range of separation distance when membrane γ(-) is higher than a critical value, suggesting that designing membrane with γ(-) higher than a critical value would confer membrane with high anti-adhesion ability. It was also found that, zeta potential on the membrane surface exerted certain effects on adsorptive fouling. This study proposed a novel strategy regarding adjusting membrane γ(-) to tune anti-adhesion ability of membrane, and also offered a thermodynamic theoretical background to this strategy.

Crossing the Border between Laboratory and Field: Bacterial Quorum Quenching for Anti-Biofouling Strategy in an MBR

Quorum quenching (QQ) has recently been acknowledged to be a sustainable antifouling strategy and has been investigated widely using lab-scale membrane bioreactor (MBR) systems. This study attempted to bring this QQ-MBR closer to potential practical application. Two types of pilot-scale QQ-MBRs with QQ bacteria entrapping beads (QQ-beads) were installed and run at a wastewater treatment plant, feeding real municipal wastewater to test the systems' effectiveness for membrane fouling control and thus the amount of energy savings, even under harsh environmental conditions. The rate of transmembrane pressure (TMP) build-up was significantly mitigated in QQ-MBR compared to that in a conventional-MBR. Consequently, QQ-MBR can substantially reduce energy consumption by reducing coarse bubble aeration without compromising the effluent water quality. The addition of QQ-beads to a conventional MBR substantially affected the EPS concentrations, as well as microbial floc size in the mixed liquor. Furthermore, the QQ activity and mechanical stability of QQ-beads were well maintained for at least four months, indicating QQ-MBR has good potential for practical applications.

Salt stress in a membrane bioreactor: dynamics of sludge properties, membrane fouling and remediation through powdered activated carbon dosing

Membrane bioreactors are a well-established technology for wastewater treatment. However, their efficiency is adversely impacted by membrane fouling, primarily inciting very conservative operations of installations that makes them less appealing from an economic perspective. This fouling propensity of the activated sludge is closely related to system disturbances. Therefore, improved insight into the impact of fouling is crucial towards increased membrane performance. In this work, the disturbance of a salt shock was investigated with respect to sludge composition and filterability in two parallel lab-scale membrane bioreactors. Several key sludge parameters (soluble microbial products, sludge-bound extracellular polymeric substances, supramicron particle size distributions (PSD), submicron particle concentrations) were intensively monitored prior to, during, and after a disturbance to investigate its impact as well as the potential governing mechanism. Upon salt addition, the supramicron PSD immediately shifted to smaller floc sizes, and the total fouling rate increased. Following a certain delay, an increase in submicron particles, supernatant proteins, and polysaccharides was observed as well as an increase in the irreversible membrane fouling rate. Recovery from the disturbance was evidenced with a simultaneous decrease in the above mentioned quantities. A similar experiment introducing powdered activated carbon (PAC) addition used for remediation resulted in either no or less significant changes in the above mentioned quantities, signifying its potential as a mitigation strategy.

Fouling mechanisms of gel layer in a submerged membrane bioreactor

The fouling mechanisms underlying gel layer formation and its filtration resistance in a submerged membrane bioreactor (MBR) were investigated. It was found that gel layer rather than cake layer was more easily formed when soluble microbial products content in sludge suspension was relatively high. Thermodynamic analyses showed that gel layer formation process should overcome a higher energy barrier as compared with cake layer formation process. However, when separation distance <2.3 nm, attractive interaction energy of gelling foulant-membrane combination was remarkably higher than that of sludge floc-membrane combination. The combined effects were responsible for gel layer formation. Filtration tests showed that specific filtration resistance (SFR) of gel layer was almost 100 times higher than that of cake layer. The unusually high SFR of gel layer could be ascribed to the gelling propensity and osmotic pressure mechanism. These findings shed significant light on fouling mechanisms of gel layer in MBRs.