Surface modification and performance enhancement of nano-hybrid f-MWCNT/PVP90/PES hemodialysis membranes

Polymeric Membranes for Biomedical Applications

Polymeric membranes are selective materials used in a wide range of applications that require separation processes, from water filtration and purification to industrial separations. Because of these materials' remarkable properties, namely, selectivity, membranes are also used in a wide range of biomedical applications that require separations. Considering the fact that most organs (apart from the heart and brain) have separation processes associated with the physiological function (kidneys, lungs, intestines, stomach, etc.), technological solutions have been developed to replace the function of these organs with the help of polymer membranes. This review presents the main biomedical applications of polymer membranes, such as hemodialysis (for chronic kidney disease), membrane-based artificial oxygenators (for artificial lung), artificial liver, artificial pancreas, and membranes for osseointegration and drug delivery systems based on membranes.

Influence of Modified Carbon Black on Nylon 6 Nonwoven Fabric and Performance as Adsorbent Material

The number of chronic kidney disease (CKD) persons continues to rise in Mexico. They require renal replacement therapy, and in the absence of it, hemodialysis is the major option for their survival. The uremic toxins present in the blood are removed by hemodialysis, which involve membranes. In this study, nonwoven fabrics with modified carbon black nanoparticles in a matrix polymer of Nylon 6 were obtained and evaluated as an adsorbent material of uremic toxins. All nonwoven fabrics were characterized by FTIR, XRD, TGA, SEM, and contact angle measurements and were evaluated as an adsorbent material for the urea toxin and as an albumin retainer. The findings suggest their potential application as a hemodialysis membrane. Nanocomposites had a higher hydrophilic characteristic compared to pure Nylon 6. The average diameter size of the fibers was in the range of 5 to 50 μm. All nanocomposites nonwoven fabrics showed high removal percentages of inulin in a range of 80-85% at 15 min of contact. Most Ny6 Zytel/CB nanocomposites showed a high percentage of urea removal (80 to 90%).

Manufacturing and Separation Characteristics of Hemodialysis Membranes to Improve Toxin Removal Rate

With the recently growing interest in health care, hemodialysis is being performed not only to treat patients with renal disease but also to improve blood circulation. At present, filters used for hemodialysis are manufactured only in certain countries, and all other countries must rely on imports. In this study, polyethersulfone (PES), which has excellent blood compatibility, was used as the main material to develop hemodialysis membranes for hemodialysis filters, and these hemodialysis membranes were prepared by adding a hydrophilic polymer, polyvinylpyrrolidone (PVP), and varying the type of nonsolvent during the manufacturing process to improve the toxin removal rate and biocompatibility. The addition of PVP was confirmed through attenuated total reflection Fourier transform infrared (ATR-FTIR), and the structure of the membranes depending on the nonsolvent was analyzed through scanning electron microscopy (SEM) and atomic force microscopy (AFM) images. The contact angle results indicated that the hydrophilicity of the membrane surface was improved as the concentration of PVP increased. The results of the toxin filtration efficiency experiment using urea, creatinine, and bovine serum albumin (BSA) confirmed removal rates of 58.8% and 56.87%, respectively, and a protein loss of less than 8%. Also, cell viability was over 90% at the PVP concentration of 2% or higher. A preliminary study was conducted on the improvement of toxin filtration efficiency and the development potential of these hemodialysis membranes with excellent biocompatibility.

Dual Optimized Sulfonated Polyethersulfone and Functionalized Multiwall Carbon Tube Based Composites High Fouling Resistance Membrane for Protein Separation

Commercial grade sulfonated-Polyethersulfone (S-PES) and functionalized multiwall carbon nanotube (f-MWCNT)/polyvinylpyrrolidone (PVP) nanocomposites (NCs) were used to enhance and optimize the antifouling, protein resistance and protein separation properties of the S-PES ultrafiltration membranes. The polarities of sulfonic groups of S-PES, carbonyl carbon of pyrrolidone, hydroxyl and carboxyl groups of f-MWCNT in the membrane composition helped to strongly bind each other through hydrogen bonding, as shown by Fourier-transform infrared spectroscopy (FTIR). These binding forces greatly reduced the leaching of NCs and developed long finger-like projection, as confirmed by elution ratio and cross-sectional studies of the membranes via field emission scanning electron microscope (FESEM). The contact angle was reduced up to 48% more than pristine PES. Atomic force microscopy (AFM) was employed to study the various parameters of surface roughness with 3d diagrams, while grain analysis of membrane surface provided a quantitative estimation about volume, area, perimeter, length, radius and diameter. The NCs/S-PES enhanced the flux rate with an impressive (80–84%) flux recovery ratio and (58–62%) reversible resistance (R_r) value in situ, with 60% and 54.4% lesser dynamic and static protein adsorption. The best performing membrane were reported to remove 31.8%, 66.3%, 83.6% and 99.9% for lysozyme-(14.6 kDa), trypsin-(20 kDa), pepsin-(34.6 kDa) and bovine serum albumin (BSA-66 kDa), respectively.

Effect of Dope Flow Rate and Post-Treatment on the Morphology, Permeation and Metal Ion Rejection from PES/LiBr-Based UF Hollow Fiber Membranes

This study investigated the influence of dope extrusion rate (DER) and post-treatment effect on the morphology, permeation, and metal ion rejection by polyethersulfone/lithium bromide (PES/LiBr)-based hollow fiber (HF) membranes. HF fibers were spun with 2.25, 2.5, and 3.1 ratios of DER to bore fluid rate (BFR), wherein DER varied from 11.35, 12.5, to 15.6 mL/min with a fixed BFR (5 mL/min). Molecular weight cutoff (MWCO), pore size, water flux, and flux recovery ratio were determined, whereas lake water was used to observe the rejection rate of dissolved metallic ions. Results showed that with the increase of the DER wall thickness (WT), HFs increased from 401.5 to 419.5 um, and furthermore by the post-treatments up to 548.2 um, as confirmed by field emission scanning electron microscope (FESEM) analysis. Moreover, MWCO, pore size, and the pure water permeation (PWP) of the HF membranes decreased, while the separation performance for polyethylene glycol (PEG) solute increased with increasing DER. Post-treated HFs from 11.35 mL/min of DER showed 93.8% of MWCO value with up to 90% and 70% rejection of the arsenic and chromium metallic ions, respectively, in comparison with all other formulated HFs.

Recent trends in therapeutic application of engineered blood purification materials for kidney disease

Blood purification is a commonly used method to remove excess metabolic waste in the blood in renal replacement therapy. The sufficient removal of these toxins from blood can reduce complications and improve survival lifetime in dialysis patients. However, the current biological blood purification materials in clinical practice are not ideal, where there is an unmet need for producing novel materials that have better biocompatibility, reduced toxicity, and, in particular, more efficient toxin clearance rates and a lower cost of production. Given this, this review has carefully summarized newly developed engineered different structural biomedical materials for blood purification in terms of types and structure characteristics of blood purification materials, the production process, as well as interfacial chemical adsorption properties or mechanisms. This study may provide a valuable reference for fabricating a user-friendly purification device that is more suitable for clinical blood purification applications in dialysis patients.

Decreasing free fatty acid of crude palm oil with polyvinylidene fluoride hollow fiber membranes using a combination of chitosan and glutaraldehyde

Crude palm oil (CPO) has emerged as a significant commodity in the economic and social development of producer nations.

Fabrication and dialysis performance of functionalized multiwall carbon nanotubes integrated cellulose acetate/poly(vinylpyrrolidone) membranes

Mixed matrix membranes (MMMs) of cellulose acetate/poly(vinylpyrrolidone) (CA/PVP) infused with acid functionalized multiwall carbon nanotubes (f-MWCNTs) were fabricated by an immersion phase separation technique for hemodialysis application. Membranes were characterized using FTIR, water uptake, contact angle, TGA, DMA and SEM analysis. The FTIR was used to confirm the bonding interaction between CA/PVP membrane matrix and f-MWCNTs. Upon addition of f-MWCNTs, TGA thermograms and glass transition temperature indicated improved thermal stability of MMMs. The surface morphological analysis demonstrated revealed uniform distribution of f-MWCNTs and asymmetric membrane structure. The water uptake and contact angle confirmed that hydrophilicity was increased after incorporation of f-MWCNTs. The membranes demonstrated enhancement in water permeate flux, bovine serum albumin (BSA) rejection with the infusion of f-MWCNTs; whereas BSA based anti-fouling analysis using flux recovery ratio test shown up to 8.4% improvement. The urea and creatinine clearance performance of MMMs were evaluated by dialysis experiment. It has been found that f-MWCNTs integrated membranes demonstrated the higher urea and creatinine clearance with increase of 12.6% and 10.5% in comparison to the neat CA/PVP membrane. Thus, the prepared CA/PVP membranes embedded with f-MWCNTs can be employed for wide range of dialysis applications.

A Review of Commercial Developments and Recent Laboratory Research of Dialyzers and Membranes for Hemodialysis Application

Dialyzers have been commercially used for hemodialysis application since the 1950s, but progress in improving their efficiencies has never stopped over the decades. This article aims to provide an up-to-date review on the commercial developments and recent laboratory research of dialyzers for hemodialysis application and to discuss the technical aspects of dialyzer development, including hollow fiber membrane materials, dialyzer design, sterilization processes and flow simulation. The technical challenges of dialyzers are also highlighted in this review, which discusses the research areas that need to be prioritized to further improve the properties of dialyzers, such as flux, biocompatibility, flow distribution and urea clearance rate. We hope this review article can provide insights to researchers in developing/designing an ideal dialyzer that can bring the best hemodialysis treatment outcomes to kidney disease patients.

Removal of Humic Acid Using 3-Methacryloxypropyl Trimethoxysilane Functionalized MWCNT Loaded TiO2/PES Hybrid Membrane

In the present work, a highly efficient mixed matrix membrane (MMM) for humic acid (HA) removal was developed. Multiwalled carbon nanotubes (MWCNTs) were functionalized in the presence of 3-methacryloxypropyl trimethoxysilane using the co-condensation method and were subsequently loaded with TiO2 (prepared via the sol-gel route). The as-prepared material was then incorporated into a PES polymer solution to prepare a fMWCNT-TiO2/PES hybrid membrane via non-solvent induced phase inversion. The microstructure of the membrane was characterized using Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, water contact angle, thickness, porosity, and pore size. The fMWCNT-TiO2/PES hybrid membrane was tested for the removal of HA and antifouling performance. The results show that the surface hydrophilicity of the membranes was greatly improved upon the addition of the fMWCNT-TiO2 particles. The results show that 92% of HA was effectively removed after 1 h of filtration. In comparison with pristine membrane, the incorporation of fMWCNT-TiO2 nanoparticles led to enhanced pure water flux (99.05 L/m2 h), permeate flux (62.01 L/m2 h), higher HA rejection (92%), and antifouling improvement (RFR: 37.40%, FRR: 86.02%). Thus, the fMWCNT-TiO2/PES hybrid membrane is considered to be a great potential membrane for the improvement of ultrafiltration membranes.

Nano architectured cues as sustainable membranes for ultrafiltration in blood hemodialysis

Membranes with zeolites are encouraging for performing blood dialysis because zeolites can eliminate uremic toxins through molecular sieving. Although the addition of various pore-gen and adsorbent in the membrane can certainly impact the membrane production along with creatinine adsorption, however, it is not directed which pore-gen along with zeolite leads to better performance. The research was aimed at reducing the adsorption of protein-bound and uremic toxins by using mordenite zeolite as an adsorbent while polyethylene glycol and cellulose acetate as a pore generating agent. Membranes were cast by a phase-inversion technique which is cheap and easy to handle as compared to the electro-spinning technique. Through this strategy, the ability to adsorb creatinine and solute rejection percentage were measured and compared against the pristine PSU, when only PEG was used as a pore-modifier and when PEG along with CA was used as a pore-modifier along with a different concentration of zeolite. The experiments revealed that PEG membranes can give a better solute rejection percentage (93%) but with a low creatinine adsorption capacity that is 7654 μg/g and low bio-compatibility (PRT 392 s, HR 0.46%). However, PEG/CA membranes give maximum creatinine adsorption that is 9643 μg/g and also better bio-compatibility (PRT 490 s, HR 0.37%) but with a low BSA rejection (72%) as compared to the pristine PSU and PEG membranes. The present study finds that the concentration of mordenite zeolite affects the membrane performance because its entrapment and large pore size of the membrane decreases solute rejection but increases creatinine uptake level along with the better bio-compatibility.

Fabrication of Zwitterion TiO2 Nanomaterial-Based Nanocomposite Membranes for Improved Antifouling and Antibacterial Properties and Hemocompatibility and Reduced Cytotoxicity

Although zwitterion nanomaterials exhibit outstanding antifouling property, hemocompatibility, and antibacterial activity, their poor solubility in organic solvents limits their practical applications. In the present study, natural lysine (amino acids) was surface-grafted onto one-dimensional (1D) TiO2 nanofibers (NFs) through an epoxy ring opening in which the 3-glycidyloxypropyl (dimethoxy) methyl silane was used as a coupling agent. Chemical binding and morphological studies, such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy, were conducted to confirm the successful grafting of lysine onto the TiO2 NFs. The lysine-grafted TiO2 NF-polyethersulfone (PES) membrane induced electrostatic interactions and increased the surface charges from -28 to 16 mV in ζ-potential analysis. The lysine exhibited zwitterion characteristics owing to the presence of amino (cations) and carboxyl (anions) functional groups. Moreover, the modified TiO2-PES zwitterion membranes exhibited good water flux performances compared to the pristine membrane. ZT-4 membrane displayed the highest water fluxand bovine serum albumin (BSA) rejection of 137 ± 1.8 L m-2 h-1 and 94 ± 1%, respectively. The cell viability results revealed that the zwitterion PES membrane had excellent biocompatibility with peripheral blood mononuclear cells. The present work offers a convenient strategy to improve the hydrophilicity, antifouling property, and hemocompatibility of modified TiO2-PES zwitterion membranes for their biomedical and blood-contacting applications such as hemodialysis.

Fabrication and performance evaluation of polymeric membrane using blood compatible hydroxyapatite for artificial kidney application

In the current study, a phase inversion scheme was employed to fabricate hydroxyapatite (HA)/polysulfone (PSF)-based asymmetric membranes using a film applicator with water as a solvent and nonsolvent exchanging medium. Fourier Transform Infrared (FTIR) and X-ray diffraction (XRD) spectroscopic studies were conducted to confirm the bonding chemistry and purity of filler. The inherent thick nature of PSF generated sponge-like shape while the instantaneous demixing process produced finger-like pore networks in HA/PSF-based asymmetric membranes as exhibited by scanning electron microscope (SEM) micrographs. The FTIR spectra confirmed noncovalent weak attractions toward the polymer surface. The leaching ratio was evaluated to observe the dispersion behavior of HA filler in membrane composition. Hydrophilicity, pore profile, pure water permeation (PWP) flux, and molecular weight cutoff (MWCO) values of all formulated membranes were also calculated. Antifouling results revealed that HA modified PSF membranes exhibited 43% less adhesion of bovine serum albumin (BSA) together with >86% recovery of flux. Membrane composition showed 74% total resistance, out of which 60% was reversible resistance. Biocompatibility evaluation revealed that the modified membranes exhibited prothrombin time (PT), and thrombin time (TT) comparable with typical blood plasma, whereas proliferation of living cells over membrane surface proved its nontoxic behavior toward biomedical application. The urea and creatinine showed effective adsorption aptitude toward HA loaded PSF membranes.

Investigations of the characteristics and performance of modified polyethersulfones (PES) as membrane oxygenator

The modification of membrane oxygenators to minimize protein adsorption onto the surface is often accompanied by the loss of membrane performance. This study aims to explore polyethersulfone (PES) as a new material for membrane oxygenator applications and to assess its potentials. Accordingly, different modification techniques are applied to improve surface properties of PES membranes. To achieve this goal, two separate modification methods including incorporation of TiO2 into the membrane matrix as well as grafting polyethylene glycol (PEG) through oxygen plasma treatment are developed and the effects are examined. The results reveal that protein adsorption to the nanocomposite membrane containing 0.50 wt. % TiO2 and the grafted membrane decreased by 47 and 31%, respectively. In terms of performance, permeability and oxygen transfer rate of all modified membranes exceeded 808 GPU and 2.7 × 10−4 mol·m−2·s−1, respectively. Contact angle analysis revealed signs of hydrophilicity enhancement of membranes after modifications. The findings suggest that upon proper modifications, membranes based on PES could be considered as promising candidates for membrane oxygenator applications and deserves further investigations.

Cellulose acetate-polyvinyl alcohol blend hemodialysis membranes integrated with dialysis performance and high biocompatibility

Hemodialysis considered as therapy of end-stage renal disease (ESRD) for the separation of protein and uremic toxins based on their molecular weights using semi-permeable membranes. Cellulose Acetate (CA) hemodialysis membrane has been widely used in the biomedical field particularly for hemodialysis applications. The main issue of CA membrane is less selectivity and hemocompatibility. In this study, to enhance the filtration capability and biocompatibility of CA hemodialysis membrane modified by using Polyvinyl Alcohol (PVA) and Polyethylene Glycol (PEG) as additives. CA-PVA flat sheet membranes were cast by phase inversion method, and separation was done by dead-end filtration cell. The synthesized membranes were described in terms of chemical structure using Fourier Transform Infrared Spectroscopy (FTIR) and morphology by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), pure water flux, solute permeation, and protein retention. Biocompatibility of the membranes was tested by the platelet adherence, hemolysis ratio, thrombus formation, and plasma recalcification time. SEM images exposed that the CA-PVA membrane has a uniform porous structure. 42.484 L/m² h is the maximum pure water flux obtained. The CA-PVA rejected up to 95% of bovine serum albumin (BSA). A similar membrane separated 93% of urea and 89% of creatinine. Platelet adhesion and hemolysis ratio of casted membranes were less than the pure CA membrane. Increased clotting time and less thrombus formation on the membrane's surface showed that the fabricated membrane is biocompatible. CA-PVA hemodialysis membranes are more efficient than conventional reported hemodialysis membranes. It revealed that CA-PVA is high performing biocompatible hemodialysis membrane.

Biocompatibility performance evaluation of high flux hydrophilic CO3Ap/HAP/PSF composite membranes for hemodialysis application

Carbonate apatite/hydroxyapatite (CO3Ap/HAP) additive was obtained by calcination of wasted chicken bones at 900°C. Intermolecular attraction exists between CO3Ap/HAP additive and blended polysulfone (PSF) polymer. Electron dispersive X-ray (EDX) and FTIR analysis were carried out to check the elemental composition and bonding chemistry of prepared additive. The instantaneous demixing process generated consistent finger-like networks in CO3Ap/HAP/PSF-based composite membranes while sponge-like structure was shown by PSF as revealed by SEM images. The increase in weight % of additive loading is also confirmed by EDX analysis. Furthermore, the interaction mechanism of CO3Ap/HAP additive with polysulfone medium was analyzed by FTIR exploration. The water absorption experiment defined a 93% expansion in hydrophilic performance. Change in porosity occurs with additive loading and pure water permeation flux improved up to 11 times. Approximately, antifouling results revealed that 87% of water flux was recovered after treating with a protein solution, whereas a 30% improvement in antifouling capability in case of bovine serum albumin solution occurred. In vitro cytotoxicity, and clotting times study was carried out to evaluate virulent behavior and anticoagulation activity of formulated membranes.

Biocompatible chicken bone extracted dahllite/hydroxyapatite/collagen filler based polysulfone membrane for dialysis

In the current study, dahllite/hydroxyapatite/collagen filler extracted via calcination of wasted chicken bone was blended with PSf polymer to obtain highly biocompatible, and antifoulant hemodialysis membranes. FTIR and Raman spectroscopic analysis was done to obtain information about the bonding chemistry of the obtained filler. The intermolecular interaction that existed between dahllite/hydroxyapatite/collagen filler and pristine PSf was confirmed by Raman spectroscopic study. The PSf polymer exhibited a sponge-like structure owing to its high thickness and slow exchange with non-solvent in coagulation bath whilst the instantaneous de-mixing course produced finger-like capillaries in dahllite/hydroxyapatite/collagen filler based PSf membranes as exposed by SEM photographs. The presence of different wt. % of filler composition in the PSf matrix improved the mechanical strength as revealed by fatigue analysis. The hydrophilic character improved by 78% while leaching consistency adjusted to 0%-4%. Pure water permeation (PWP) flux improved by nine times. The pore profile improved with the addition of filler as revealed by hydrophilicity experiment, PWP flux, and SEM micrographs. Fouling evaluation results disclosed that filler based membranes showed 36% less adsorption of protein (BSA) solution together with more than 84% flux recovery ratio. The biocompatibility valuation analysis unveiled that membranes composed of filler showed extended prothrombin and thrombin coagulation times, reduced activation of fibrinogen mass, and less adhesion of plasma proteins in comparison with pristine PSf membrane. The adsorption capacity of fabricated membranes for urea and creatinine improved by 31% (in the case of urea) and 34% (in the case of creatinine) in contrast with pristine PSf membrane. The overall results showed that the M-3 membrane was optimized in terms of surface properties, protein adhesion, anticoagulation activity, and adsorption amount of urea and creatinine.

Ultrasound-Assisted Surface Modification of MWCNT Using Organic Acids

In the present work, multiple-wall carbon nanotubes (MWCNTs) were surface modified in an environmentally friendly way, using low-frequency ultrasonic energy. This type of modification was carried-out using two different types of organic acids, citric acid (CA) and oxalic acid (OA). The modification of the MWCNTs was confirmed by Fourier-transform infrared spectroscopy (FTIR), where functional groups such as OH, C=O, O–C=O and COOH were detected. By means of Raman spectroscopy, an increase in carbon surface defects was found. On the other hand, using X-ray photoelectron spectroscopy (XPS), oxidation was evidenced on the surface of the modified MWCNT. In both Raman spectroscopy and XPS, the results indicate a greater modification when CA is used, possibly due to the fact that CA has a larger number of functional groups. MWCNT-CA showed good dispersion in methanol, while MWCNT-OA showed good stability in methanol and ethanol. Finally, a 20% removal of creatinine efficiency improvement was found with respect to the unmodified MWCNTs, while no improvement was found in the case of urea and uric acid.

In-Situ Surface Modification of Terpinen-4-ol Plasma Polymers for Increased Antibacterial Activity

Surface modification of thin films is often performed to enhance their properties. In this work, in situ modification of Terpinen-4-ol (T4) plasma polymer is carried out via simultaneous surface functionalization and nanoparticle immobilization. Terpinen-4-ol plasma polymers surface were decorated with a layer of ZnO nanoparticles in an oxygen plasma environment immediately after polymer deposition. A combination of hydrophilic modification and ZnO nanoparticle functionalization of the T4 polymer surface led to an enhancement in antibacterial properties by factor of 3 (from 0.75 to 0.25 CFU.mm-2). In addition, ZnO nanoparticle-modified coatings demonstrated improved UV absorbing characteristics in the region of 300-400 nm by 60% relative to unmodified coatings. The ZnO modified coatings were transparent in the visible region of 400-700 nm. The finding points towards the potential use of ZnO nanoparticle-modified T4 plasma polymers as optically transparent UV absorbing coatings.

Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release

The prevention of bacteria-induced infections has been increasing in importance in both clinical surgery and biomedical engineering. Although great attention has been paid to designing intelligent antibacterial surfaces, the fabrication processes are still not facile and universal enough, and the antibacterial efficiencies of these surfaces are also not ideal. Herein, ionic liquid (IL) molecules of 3-(12-mercaptododecyl)-1-methyl-1H-imidazol-3-ium bromide (IL(Br)) were synthesized with the minimum inhibitory concentrations as low as 4 and 8 μg mL-1 against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively. By simply immersing a polymeric substrate into the IL(Br) solution, an antibacterial surface with high killing efficiency of 99% against S. aureus (94% against E. coli) was achieved via a mussel-inspired approach. Subsequently, 97% S. aureus and 95% E. coli on the substrate could be released by simple ion-exchange of Br- with (CF3SO2)2N- due to the ion sensitivity of the IL molecular brushes. Thus, the proposed facile strategy towards a superior efficiency surface could be potentially used in intelligent antibacterial fields.

Hemodialysis performance and anticoagulant activities of PVP-k25 and carboxylic-multiwall nanotube composite blended Polyethersulfone membrane

Non-covalent electrostatic interaction between amide nitrogen and carbonyl carbon of shorter chain length of polyvinylpyrrolidone (PVP-k25) was developed with in-house carboxylic oxidized multiwall carbon nanotubes (O-MWCNT) and then blended with Polyethersulfone (PES) polymer. FTIR analysis was utilized to confirm bonding nature of nano-composites (NCs) of O-MWCNT/PVP-k25 and casting membranes. Non-solvent induces phase separation process developed regular finger-like channels in composite membranes whereas pristine PES exhibited spongy entities as studied by cross sectional analysis report of FESEM. Further, FESEM instrument was also utilized to observe the dispersion of O-MWCNT/PVP based nanocomposite (NCs) with PES and membranes leaching phenomena analysis. Contact angle experiments described 24% improvement of hydrophilic behaviour, leaching ratio of additives was reduced to 1.89%, whereas water flux enhanced up to 6 times. Bovine serum albumin (BSA) and lysozyme based antifouling analysis shown up to 25% improvement, whereas 84% of water flux was regained after protein fouling than pristine PES. Anticoagulant activity was reported by estimating prothrombin, thrombin, plasma re-calcification times and production of fibrinogen cluster with platelets-adhesions photographs and hemolysis experiments. Composite membranes exhibited 3.4 and 3 times better dialysis clearance ratios of urea and creatinine solutes as compared to the raw PES membrane.

Surface Modification of Graphene Nanoplatelets by Organic Acids and Ultrasonic Radiation for Enhance Uremic Toxins Adsorption

Ultrasound energy is a green and economically viable alternative to conventional techniques for surface modification of materials. The main benefits of this technique are the decrease of processing time and the amount of energy used. In this work, graphene nanoplatelets were treated with organic acids under ultrasonic radiation of 350 W at different times (30 and 60 min) aiming to modify their surface with functional acid groups and to improve the adsorption of uremic toxins. The modified graphene nanoplatelets were characterized by Fourier transform infrared spectroscopy (FT⁻IR), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The optimum time for modification with organic acids was 30 min. The modified nanoplatelets were tested as adsorbent material for uremic toxins using the equilibrium isotherms where the adsorption isotherm of urea was adjusted for the Langmuir model. From the solution, 75% of uremic toxins were removed and absorbed by the modified nanoplatelets.

Self-assembled membrane composed of amyloid-like proteins for efficient size-selective molecular separation and dialysis

The design and scalable construction of robust ultrathin protein membranes with tunable separation properties remain a key challenge in chemistry and materials science. Here, we report a macroscopic ultrathin protein membrane with the potential for scaled-up fabrication and excellent separation efficiency. This membrane, which is formed by fast amyloid-like lysozyme aggregation at air/water interface, has a controllable thickness that can be tuned to 30–250 nm and pores with a mean size that can be tailored from 1.8 to 3.2 nm by the protein concentration. This membrane can retain > 3 nm molecules and particles while permitting the transport of small molecules at a rate that is 1~4 orders of magnitude faster than the rate of existing materials. This membrane further exhibits excellent hemodialysis performance, especially for the removal of middle-molecular-weight uremic toxins, which is 5~6 times higher in the clearance per unit area than the typical literature values reported to date.

Membrane separation is important for a range of industrial and medical applications. Here, the authors report on the formation of self-assembled protein membranes for size selective separation and demonstrate application in the separation of dyes, nanoparticles and in hemodialysis.

Recent advances in hydrophilic modification and performance of polyethersulfone (PES) membrane via additive blending

The blending of additives in the polyethersulfone (PES) matrix is an important approach in the membrane industry to reduce membrane hydrophobicity and improve the performance (flux, solute rejection, and reduction of fouling). Several (hydrophilic) modifications of the PES membrane have been developed. Given the importance of the hydrophilic modification methods for PES membranes and their applications, we decided to dedicate this review solely to this topic. The types of additives embedded into the PES matrix can be divided into two main categories: (i) polymers and (ii) inorganic nanoparticles (NPs). The introduced polymers include polyvinylpyrrolidone, chitosan, polyamide, polyethylene oxide, and polyethylene glycol. The introduced nanoparticles discussed include titanium, iron, aluminum, silver, zirconium, silica, magnesium based NPs, carbon, and halloysite nanotubes. In addition, the applications of hydrophilic PES membranes are also reviewed. Reviewing the research progress in the hydrophilic modification of PES membranes is necessary and imperative to provide more insights for their future development and perhaps to open the door to extend their applications to other more challenging areas.

Nanofibrous Tubular Membrane for Blood Hemodialysis

As the most important components of a hemodialysis device, nanofibrous membranes enjoy high interconnected porosity and specific surface area as well as excellect permeability. In this study, a tubular nanofibrous membrane of polysulfone nanofibers was produced via electrospinning method to remove urea and creatinine from urine and blood serums of dialysis patients. Nanofibrous membranes were electrospun at a concentration of 11.5 wt% of polysulfone (PS) and dimethylformamide (DMF)/tetrahydrofuran (THF) with a ratio of 70/30. The effects of the rotational speed of collectors, electrospinning duration, and inner diameter of the tubular nanofibrous membrane on the urea and creatinine removal efficiency of the tubular membrane were investigated through the hemodialysis simulation experiments. It was found that the tubular membrane with an inner diameter of 3 mm elecrospun at shorter duration with lower collecting speed had the highest urea and creatinine removal efficiency. The hemodialysis simulation experiment showed that the urea and creatinine removal efficiency of the tubular membrane with a diameter of 3 mm were 90.4 and 100%, respectively. Also, three patients' blood serums were tested with the nanofibrous membrane. The results showed that the creatinine and urea removal rates were 93.2 and 90.3%, respectively.

Polydopamine/cysteine surface modified hemocompatible poly(vinylidene fluoride) hollow fiber membranes for hemodialysis

Membrane surface design is significant for the development and application of synthetic polymer hemodialysis membranes. In this study, the influence of zwitterionic cysteine on poly(vinylidene fluoride) (PVDF) hollow fiber membrane was investigated. The polydopamine layer was formed through dopamine self-polymerization on PVDF membrane surface, and then cysteine was covalent grafted onto the layer to improve the anti-biofouling property and hemocompatibility. The elementary composition of membrane surfaces was characterized by X-ray photoelectron spectroscopy. The influence of polydopamine and cysteine on modified membrane surface morphologies was studied by field emission scanning electron microscopy. The modified PVDF membranes were confirmed to have excellent hydrophilicity, stable mechanical properties and good hemocompatibility (dynamic and static anti-protein adsorption, hemolysis ratio, plasma coagulation). And these properties were increased with the incorporation of polydopamine and cysteine. The optimized modified membranes exhibited high pure water flux (∼ 195.5 L/m² h at 0.1 MPa) and selectivity (clearance ratio of urea and lysozyme was 75.1 and 55.4%, and rejection rate of bovine serum albumin was 98.8%). This work provides a surface modification method of PVDF hollow fiber membranes and suggests a potential application of PVDF membranes in hemodialysis field. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2869-2877, 2018.

Incorporation of graphene oxide in polyethersulfone mixed matrix membranes to enhance hemodialysis membrane performance

Graphene is a carbon allotrope and possesses numerous unique properties which make it an attractive material in many areas. In this work, graphene oxide (GO) was added to polyethersulfone (PES) mixed matrix membranes (MMMs) to improve the performance of hemodialysis membranes. GO was synthesized from tartaric acid by pyrolysis with various temperatures of the pyrolysis and the membrane was fabricated by a casting solution method followed by its characterization. The MMMs showed better mechanical properties than pristine PES with a tensile stress and tensile strain value of 5.55 MPa and 0.039 m, respectively. The hydrophilicity of the membranes which is in agreement with contact angle values showed that GO addition increased the hydrophilicity of the MMMs. Hence, the solute flux and clearance of creatinine gave values of 2.94 L m⁻² h⁻¹ and 78.3%, respectively. Cross sectional images and the surface morphology were also recorded using scanning electron microscopy (SEM). The resulting data proved that the modified MMMs can be a potential material for hemodialysis.

In this work, graphene oxide (GO) was added to polyethersulfone (PES) mixed matrix membranes (MMMs) to improve the performance of hemodialysis membranes.