Hierarchical heteroarchitectures functionalized membrane for high efficient water purification

An Overview of Photocatalytic Membrane Degradation Development

Environmental pollution has become a worldwide issue. Rapid industrial and agricultural practices have increased organic contaminants in water supplies. Hence, many strategies have been developed to address this concern. In order to supply clean water for various applications, high-performance treatment technology is required to effectively remove organic and inorganic contaminants. Utilizing photocatalytic membrane reactors (PMRs) has shown promise as a viable alternative process in the water and wastewater industry due to its efficiency, low cost, simplicity, and low environmental impact. PMRs are commonly categorized into two main categories: those with the photocatalyst suspended in solution and those with the photocatalyst immobilized in/on a membrane. Herein, the working and fouling mechanisms in PMRs membranes are investigated; the interplay of fouling and photocatalytic activity and the development of fouling prevention strategies are elucidated; and the significance of photocatalysis in membrane fouling mechanisms such as pore plugging and cake layering is thoroughly explored.

Efficient treatment of brine wastewater through a flow-through technology integrating desalination and photocatalysis

Many current treatments for brine wastewaters are energy-intensive, chemical-intensive, and involve independent process in the removal of salts and contaminants. We demonstrate that through the integration of capacitive deionization and photocatalysis reactions within carbon nanotubes (CNTs) based membrane system, we are able to realize the purification and desalination of wastewaters via single-step, energy-efficient, and environmentally friendly route. We firstly designed the membrane system consisting of graphitic carbon nitride (g-C₃N₄), CNTs membrane, and poly(vinyl alcohol)-formaldehyde (PVF) foam. Then, two identical membrane systems were used as permeable electrodes and photocatalytic microreactors to construct the flow-through setup. The tests of the setup with a variety of dye solution, antibiotics solution, and actual wastewaters prove that wastewaters passing through the setup promptly turn to clean water with significantly decreased salinity. This is because the setup can use C₃N₄ modified CNTs membrane to adsorb organic contaminants and inorganic ions and decompose contaminants via photocatalysis reactions. In addition, by discharging the setup, its adsorption capacity towards salts is easily recovered. Consequently, the flow-through setup is observed to exhibit stable performance for concurrent removal of organic contaminants and inorganic salts in multiple cycles.

An overview on cellulose-based material in tailoring bio-hybrid nanostructured photocatalysts for water treatment and renewable energy applications

A combination between the nanostructured photocatalyst and cellulose-based materials promotes a new functionality of cellulose towards the development of new bio-hybrid materials for various applications especially in water treatment and renewable energy. The excellent compatibility and association between nanostructured photocatalyst and cellulose-based materials was induced by bio-combability and high hydrophilicity of the cellulose components. The electron rich hydroxyl group of celluloses helps to promote superior interaction with photocatalyst. The formation of bio-hybrid nanostructured are attaining huge interest nowadays due to the synergistic properties of individual cellulose-based material and photocatalyst nanoparticles. Therefore, in this review we introduce some cellulose-based material and discusses its compatibility with nanostructured photocatalyst in terms of physical and chemical properties. In addition, we gather information and evidence on the fabrication techniques of cellulose-based hybrid nanostructured photocatalyst and its recent application in the field of water treatment and renewable energy.

Pore Functionalized PVDF Membranes with In-Situ Synthesized Metal Nanoparticles: Material Characterization, and Toxic Organic Degradation

Functionalized PVDF membrane platforms were developed for environmentally benign in-situ nanostructured Fe/Pd synthesis and remediation of chlorinated organic compounds. To prevent leaching and aggregation, nanoparticle catalysts were integrated into membrane domains functionalized with poly (acrylic acid). Nanoparticles of 16-19 nm were observed inside the membrane pores by using focused ion beam (FIB). This technique prevents mechanical deformation of the membrane, compared to the normal SEM preparation methods, thus providing a clean, smooth surface for nanoparticles characterization. This allowed quantification of nanoparticle properties (size and distribution) versus depth underneath the membrane surface (0-20 µm). The results showed that nanoparticles were uniformly sized and evenly distributed inside the membrane pores. However, the size of nanoparticles inside the membrane pores was 13.9% smaller than those nanoparticles located on the membrane surface. Investigating nanoparticles inside membrane pores increases the accuracy of kinetic analysis and modeling aspects. Furthermore, the Fe/Pd immobilized membranes showed excellent performance in the degradation of chlorinated organics: Over 96% degradation of 3,3',4,4',5-pentachlorobiphenyl (PCB 126) was achieved in less than 15 s residence time in convective flow mode. The regeneration and reuse of this catalytic membrane system were also studied. Particles were examined in XRD upon formation, after deliberate oxidation, and after regeneration. The regenerated sample showed the same crystalline pattern as the original sample. Repeated degradation experiments demonstrated successful PCB 126 dechlorination with nanoparticles regenerated for four cycles with only a small loss in reactivity. It demonstrated that Fe/Pd immobilized membranes have the potential for large-scale remediation applications.