Regenerable antimicrobial activity in polyamide thin film nanocomposite membranes

Nano-enabled antimicrobial thin films: design and mechanism of action

Antimicrobial thin films are types of protective coatings that are applied to surfaces such as medical devices, food packaging materials, water-resistant coatings, and other systems. These films prevent and reduce the spread of microbial organisms, including bacteria, fungi, and viruses. Antimicrobial thin films can be prepared from a variety of nanostructured materials including metal nanoparticles, metal oxides, plant materials, enzymes, bacteriocins and polymers. Their antimicrobial mechanism varies mostly based on the types of active agents from which the film is made of. Antimicrobial thin films are becoming increasingly popular microbial treatment methods due to their advantages such as enhanced stability, reduced toxicity levels, extended effectiveness over time and broad spectrum antimicrobial action without side effects on human health or the environment. This popularity and enhanced performance is mainly due to the extended possibility of film designs. Thin films offer convenient formulation methods which makes them suitable for commercial practices aiming at high turnover rates along with residential applications requiring frequent application cycles. This review focuses on recent developments in the possible processing methods and design approaches for assembling the various types of antimicrobial materials into nanostructured thin film-based delivery systems, along with mechanisms of action against microbes.

Self-Assembled Three-Dimensional Polyamide/Silver Nanoparticle Pore Array as a Highly Sensitive and Reproducible SERS Substrate for Pesticide Detection in Water

In this study, silver nanoparticles (AgNPs) are self-assembled onto the polyamide (PA) pore array through hydrogen bonding, resulting in and optimizing the PA/Ag 3D pore array substrates. The best surface-enhanced Raman scattering (SERS) substrate is obtained with a pore depth of 500 nm in the PA array, 30 nm AgNPs, at a pH of 5.0, and a 24 h assembly time. The SERS performance of the substrates is assessed using rhodamine 6G (R6G) as a probe molecule. The detection limit of the R6G molecule reaches 10-13 M, and the relative standard deviation is under 20%, indicating good enhancement ability and reproducibility. Furthermore, label-free detection of pesticide contaminant diquat with a detection limit of 2.69 × 10-9 M is achieved using the optimized 3D substrate, which meets environmental monitoring requirements for drinking water. The findings demonstrate that this 3D SERS substrate has promising potential for use and development in the fields of contaminant detection and chemical sensing.

Prospects of Polymeric Nanocomposite Membranes for Water Purification and Scalability and their Health and Environmental Impacts: A Review

Water shortage is a major worldwide issue. Filtration using genuine polymeric membranes demonstrates excellent pollutant separation capabilities; however, polymeric membranes have restricted uses. Nanocomposite membranes, which are produced by integrating nanofillers into polymeric membrane matrices, may increase filtration. Carbon-based nanoparticles and metal/metal oxide nanoparticles have received the greatest attention. We evaluate the antifouling and permeability performance of nanocomposite membranes and their physical and chemical characteristics and compare nanocomposite membranes to bare membranes. Because of the antibacterial characteristics of nanoparticles and the decreased roughness of the membrane, nanocomposite membranes often have greater antifouling properties. They also have better permeability because of the increased porosity and narrower pore size distribution caused by nanofillers. The concentration of nanofillers affects membrane performance, and the appropriate concentration is determined by both the nanoparticles' characteristics and the membrane's composition. Higher nanofiller concentrations than the recommended value result in deficient performance owing to nanoparticle aggregation. Despite substantial studies into nanocomposite membrane manufacturing, most past efforts have been restricted to the laboratory scale, and the long-term membrane durability after nanofiller leakage has not been thoroughly examined.

Fabrication of Polysulfone-Surface Functionalized Mesoporous Silica Nanocomposite Membranes for Removal of Heavy Metal Ions from Wastewater

Membranes are an efficient way to treat emulsified heavy metal-based wastewater, but they generally come with a trade-off between permeability and selectivity. In this research, the amine and sulphonic groups on the inner and outer surface of mesoporous silica nanoparticles (MSNs) were first modified by a chemical approach. Then, MSNs with amine and sulphonic groups were utilized as new inorganic nanofiller to fabricate mixed matrix polysulfone (PSU) nanocomposite membranes using the classical phase inversion approach. The resultant nanoparticles and membranes were characterized by their physico-chemical characteristics as well as determination of pure water permeability along with cadmium and zinc ion removal. Embedding nanoparticles resulted in a significant rise in the water permeability as a result of changes in the surface properties and porosity of the membrane. Furthermore, the efficiency of developed membranes to remove cadmium and zinc was significantly improved by more than 90% due to the presence of functional groups on nanoparticles. The functionalized-MSNs/PSU nanocomposite membrane has the potential to be an effective industrial effluent removal membrane.

Emerging nanomaterials for antibacterial textile fabrication

In recent times, the search for innovative material to fabricate smart textiles has been increasing to satisfy the expectation and needs of the consumers, as the textile material plays a key role in the evolution of human culture. Further, the textile materials provide an excellent environment for the microbes to grow, because of their large surface area and ability to retain moisture. In addition, the growth of harmful bacteria on the textile material not only damages them but also leads to intolerable foul odour and significant danger to public health. In particular, the pathogenic bacteria present in the fabric surface can cause severe skin infections such as skin allergy and irritation via direct human contact and even can lead to heart problems and pneumonia in certain cases. Recently, nanoparticles and nanomaterials play a significant role in textile industries for developing functional smart textiles with self-cleaning, UV-protection, insect repellent, waterproof, anti-static, flame-resistant and antimicrobial-resistant properties. Thus, this review is an overview of various textile fibres that favour bacterial growth and potential antibacterial nanoparticles that can inhibit the growth of bacteria on fabric surfaces. In addition, the probable antibacterial mechanism of nanoparticles and the significance of the fabric surface modification and fabric finishes in improving the long-term antibacterial efficacy of nanoparticle-coated fabrics were also discussed.

Antibiofouling performance and mechanisms of a modified polyvinylidene fluoride membrane in an MBR for wastewater treatment: Role of silver@silica nanopollens

Biofouling remains to be one of major obstacles in membrane bioreactors (MBRs), calling for the development of antibiofouling membranes. Silver nanoparticles (AgNPs), being a kind of broad spectrum bactericidal agent, have been widely used for modifying membrane; however, uncontrollable release of AgNPs and thus a short lifetime of modified membranes are thorny issues for the AgNPs-modified membranes. In this study, silica nanopollens were used as AgNPs nanocarriers for membrane modification (ASNP-M), which could improve silver delivery efficacy, avoid agglomeration and control Ag⁺ release towards bacteria. At a silver loading of 107.7 ± 10.9 μg Ag/cm², ASNP-M effectively inhibited growth of Escherichia coli and Staphylococcus aureus, with an Ag⁺ release rate of 0.5 μg/(cm² d). Long-term MBR tests showed that ASNP-M exhibited a significantly reduced transmembrane pressure increase rate of 0.88 ± 0.34 kPa/d which was much lower than that of two control membranes, i.e., pristine membrane (M0) (2.32 ± 0.86 kPa/d) and Ag@silica nanospheres (without spikes) modified membrane (ASNS-M) (2.25 ± 1.28 kPa/d). No significant adverse influences on the pollutant removal were also observed in the reactor. Foulants analysis revealed that biofilm of ASNP-M was thinner and comprised of mainly dead cells, and only organic matter with strong adhesion properties was allowed to attach onto the membrane surface. Bacterial community analysis suggested that the incorporation of Ag@silica nanopollens inhibited colonization of bacteria which are capable of causing membrane biofouling (e.g., Proteobacteria and Actinobacteria). These findings highlight the potential of the antibiofouling membrane to be used in MBRs for wastewater treatment and reclamation.

Analyzing the inhibitory effect of metabolic uncoupler on bacterial initial attachment and biofilm development and the underlying mechanism

Metabolic uncouplers inhibit biofilm and biofouling formation in membrane bioreactor (MBR) systems, which have been considered as a potential biofouling control alternative. To better understand the inhibitory mechanism of uncoupler on biofouling, this study investigated the impact of the uncoupler 3, 3', 4', 5-tetrachlorosalicylanilide (TCS) on biofilm formation of B. subtilis in different development stages. Significant reductions in both the initial bacterial attachment stage and the subsequent biofilm development stage were caused by TCS at 100 μg/L. The motility of B. subtilis in semisolid medium was inhibited by TCS, which explicitly explained the reduction in initial bacterial attachment. Meanwhile, a reduction of extracellular polymeric substance (EPS) secretion owing to TCS suggested why biofilm development was suppressed. In addition, the fluorescent materials in tight-bound EPS (TB-EPS) and loose-bound EPS (LB-EPS) of Bacillus subtilis cultured in different TCS concentrations were distinguished and quantified by three-dimensional excitation-emission matrix (EEM) fluorescence spectroscopy coupled with parallel factor analysis (PARAFAC). The results of this study suggested that the biofilm inhibitory mechanism of the uncoupler was both a inhibition in bacterial motor ability and a reduction in EPS secretion.

Essential Oils-Loaded Electrospun Biopolymers: A Future Perspective for Active Food Packaging

The growth of global food demand combined with the increased appeal to access different foods from every corner of the globe is forcing the food industry to look for alternative technologies to increase the shelf life. Essential oils (EOs) as naturally occurring functional ingredients have shown great prospects in active food packaging. EOs can inhibit the growth of superficial food pathogens, modify nutritious values without affecting the sensory qualities of food, and prolong the shelf life when used in food packaging as an active ingredient. Since 2016, various reports have demonstrated that combinations of electrospun fibers and encapsulated EOs could offer promising results when used as food packaging. Such electrospun platforms have encapsulated either pure EOs or their complexation with other antibacterial agents to prolong the shelf life of food products through sustained release of active ingredients. This paper presents a comprehensive review of the essential oil-loaded electrospun fibers that have been applied as active food packaging material.

Superhydrophobic nanocarbon-based membrane with antibacterial characteristics

To overcome the biofouling challenge which faces membrane water treatment processed, the novel superhydrophobic carbon nanomaterials impregnated on/powder activated carbon (CNMs/PAC) was utilized to successfully design prepare an antimicrobial membrane. The research was conducted following a systematic statistical design of experiments technique considering various parameters of composite membrane fabrication. The impact of these parameters of composite membrane on Staphylococcus aureus growth was investigated. The bacteria growth was analyzed through spectrophotometer and SEM. The effect of CNMs' hydrophobicity on the bacterial colonies revealed a decrease in the abundance of bacterial colonies and an alteration in structure with increasing the hydrophobicity. The results revealed that the optimum preparative conditions for carbon loading CNMs/PAC was 363.04 mg with a polymer concentration of 22.64 g/100 g, and a casting knife thickness of 133.91 μm. These conditions have resulted in decreasing the number of bacteria colonies to about 7.56 CFU. Our results provided a strong evidence on the antibacterial effect and consequently on the antibiofouling potential of CNMs/PAC in membrane.

Mussel-Inspired Surface Functionalization of AEM for Simultaneously Improved Monovalent Anion Selectivity and Antibacterial Property

A facile membrane surface modification process for improving permselectivity and antimicrobial property was proposed. A polydopamine (PDA) coating was firstly fabricated on pristine anion exchange membrane (AEM), followed by in situ reduction of Ag without adding any extra reductant. Finally, 2,5-diaminobenzene sulfonic acid (DSA) was grafted onto PDA layer via Michael addition reaction. The as-prepared AEM exhibited improved permselectivity (from 0.60 to 1.43) and effective inhibition of bacterial growth. In addition, the result of the long-term (90-h continuous electrodialysis) test expressed the excellent durability of the modified layer on membrane surface, because the concentration of Cl- and SO₄²- in diluted chamber fluctuated ~0.024 and 0.030 mol·L-1 with no distinct decline. The method described in this work makes the full use of multifunctional PDA layer (polymer-like coating, in situ reduction and post-organic reaction), and a rational design of functional AEM was established for better practical application.

Advanced membrane bioreactors systems: New materials and hybrid process design

Membrane bioreactor (MBR) is deemed as one of the most powerful technologies for efficient municipal and industrial wastewater treatment around the world. However, low microbial activity of activated sludge and serious membrane fouling still remain big challenges in worldwide application of MBR technology. Nowadays, more and more progresses on the research and development of advanced MBR with new materials and hybrid process are just on the way. In this paper, an overview on the perspective of high efficient strains applied into MBR for biological activity enhancement and fouling reduction is provided first. Secondly, as emerging fouling control strategy, design and fabrication of novel anti-fouling composited membranes are comprehensively highlighted. Meanwhile, hybrid MBR systems integrated with some novel dynamic membrane modules and/or with other technologies like advanced oxidation processes (AOPs) are introduced and compared. Finally, the challenges and opportunities of advanced MBRs combined with bioenergy production in wastewater treatment are discussed.

Four release tests exhibit variable silver stability from nanoparticle-modified reverse osmosis membranes

Modification of polyamide reverse osmosis (RO) membranes with silver nanoparticles (AgNP) may effectively control biofouling. While silver leaching tests are usually performed during membrane development, the lack of common testing protocols limits cross-comparison among different labs. We compare four release tests to quantify the release of dissolved and nanoparticulate silver from polyamide RO membranes prepared through in situ surface functionalization: (1) batch immersion, (2) dead-end filtration, (3) cross-flow filtration, and (4) low-pressure water jetting. For the first time, we demonstrated the possibility of AgNP release to membrane-treated water through direct AgNP detachment. When using Nanopure water as an extraction solution, water jetting resulted in the fastest silver mass release, while dead-end filtration caused the slowest release based on the initial release kinetic data. Dead-end filtration exhibited silver mass release an order of magnitude lower than the other three tests. Although cross-flow filtration may best represent the RO membrane operation, quantifying silver release suffers from poor mass balance due to the adsorption of dissolved silver by various reactor components and large volumes of water usage. A commonly applied batch immersion method was low cost and easily performed, but may not induce hydraulic shear sufficient for AgNP detachment from a RO membrane. The information on silver release behavior may depend on the specific test, which is important for assessing antimicrobial efficacy and service life of the nanoparticle-functionalized membranes.

Encapsulation of Cinnamon Essential Oil for Active Food Packaging Film with Synergistic Antimicrobial Activity

Porous adsorption, a less powerful adsorptive force than chemical bonds, is based on the physical adsorption of small molecules onto a solid surface that is capable of adsorbing gas or liquid molecules. Antimicrobial permutite composite (containing Ag⁺, Zn²⁺ and Ag⁺/Zn²⁺), starting from Linde Type A-permutite (LTA), was obtained in this research. The permutite samples were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), colorimeter and nitrogen adsorption technique. Cinnamon essential oil (CEO) was encapsulated into Ag⁺/Zn²⁺-permutite. The FT-IR and differential scanning calorimetry (DSC) confirmed that no chemical bond existed between CEO and Ag⁺/Zn²⁺-permutite. The loading capacity of Ag⁺/Zn²⁺-permutite/CEO was 313.07 µL/g, and it had a sustained release effect. The Ag⁺/Zn²⁺-permutite/CEO showed stronger efficacy against Aspergillus niger and Penicillium sp. than Ag⁺/Zn²⁺-permutite. Ethyl cellulose pads modified by composite antimicrobial particles were applied in the preservation of Chinese bayberry. Compared to the control group, treatment with the Ag⁺/Zn²⁺-permutite/CEO antimicrobial pads resulted in a significantly lower decay incidence. In addition, the amount of migrated silver, zinc and aluminum from LTA was below the legal limit. These results confirmed that the ethyl cellulose pads modified by the Ag⁺/Zn²⁺-permutite/CEO provided an active packaging to control decay of fresh Chinese bayberry.

D-Tyrosine loaded nanocomposite membranes for environmental-friendly, long-term biofouling control

Strategies to control biofouling without using antimicrobial chemicals are needed to prevent the spread of antibiotic resistance genes and disruption of microbial activities in biological treatment. This study developed an environmentally friendly biofouling resistant membrane by incorporating d-tyrosine onto a commercial nanofiltration membrane using FAU type zeolite nanoparticles that covalently bound to the membrane surface as carriers for slow release. The d-tyrosine loaded membrane had similar water permeability as the unmodified membrane, but greatly reduced initial cell attachment and strongly inhibited subsequent biofilm formation without inactivating the bacteria. The membrane slowly released d-tyrosine in the time course of over 5 days, and retained its anti-biofouling capability in repeated 24 h efficacy tests for as long as 6 days. In nanofiltration operation, the d-tyrosine incorporated zeolite coating completely inhibited cell adhesion on the membrane surface and significantly alleviated membrane flux decline.

Advanced Materials, Technologies, and Complex Systems Analyses: Emerging Opportunities to Enhance Urban Water Security

Innovation in urban water systems is required to address the increasing demand for clean water due to population growth and aggravated water stress caused by water pollution, aging infrastructure, and climate change. Advances in materials science, modular water treatment technologies, and complex systems analyses, coupled with the drive to minimize the energy and environmental footprints of cities, provide new opportunities to ensure a resilient and safe water supply. We present a vision for enhancing efficiency and resiliency of urban water systems and discuss approaches and research needs for overcoming associated implementation challenges.

In Situ Photocatalytic Synthesis of Ag Nanoparticles (nAg) by Crumpled Graphene Oxide Composite Membranes for Filtration and Disinfection Applications

Graphene oxide (GO) materials have demonstrated considerable potential in next-generation water treatment membrane-based technologies, which include antimicrobial applications. GO antimicrobial properties can be further enhanced by preloading or chemically generating surface-associated nanoscale silver particles (nAg). However, for these systems, enhanced antimicrobial functionality decreases over time as a function of Ag mass loss via dissolution (as Ag(+)). In this work, we demonstrate facile photocatalytic in situ synthesis of nAg particles by crumpled GO-TiO2 (GOTI) nanocomposites as an approach to (re)generate, and thus maintain, enhanced antimicrobial activity over extended operation times. The described photocatalytic formation process is highly efficient and relatively fast, producing nAg particles over a size range of 40 to 120 nm and with active (111) planes. Additionally, we show in situ surface-based photocatalyzed synthesis of nAg particles at the surface of GOTI nanocomposite membrane assemblies, allowing for simultaneous filtration and disinfection. With ca. 3 log inactivation for both Escherichia coli and Bacillus subtilis, the described membrane assemblies with in situ formed nAg demonstrate enhanced antimicrobial activity compared to the GOTI membrane surface or the support membrane alone. Under typical conditions, the working and operational time (Ag dissolution time) is calculated to be over 2 orders of magnitude higher than the loading (synthesis) time (e.g., 123 h versus 0.5 h, respectively). Taken together, results highlight the described material-based process as a potentially novel antifouling membrane technology.