1
|
Zeng J, Desmond P, Ngo HH, Lin W, Liu X, Liu B, Li G, Ding A. Membrane modification in enhancement of virus removal: A critical review. J Environ Sci (China) 2024; 146:198-216. [PMID: 38969448 DOI: 10.1016/j.jes.2023.07.003] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2023] [Revised: 07/04/2023] [Accepted: 07/04/2023] [Indexed: 07/07/2024]
Abstract
Many waterborne diseases are related with viruses, and COVID-19 worldwide has raised the concern of virus security in water into the public horizon. Compared to other conventional water treatment processes, membrane technology can achieve satisfactory virus removal with fewer chemicals, and prevent the outbreaks of viruses to a maximal extent. Researchers developed new modification methods to improve membrane performance. This review focused on the membrane modifications that enhance the performance in virus removal. The characteristics of viruses and their removal by membrane filtration were briefly generalized, and membrane modifications were systematically discussed through different virus removal mechanisms, including size exclusion, hydrophilic and hydrophobic interactions, electronic interactions, and inactivation. Advanced functional materials for membrane modification were summarized based on their nature. Furthermore, it is suggested that membranes should be enhanced through different mechanisms mainly based on their ranks of pore size. The current review provided theoretical support regarding membrane modifications in the enhancement of virus removal and avenues for practical application.
Collapse
Affiliation(s)
- Jie Zeng
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China
| | - Peter Desmond
- Institute of Environmental Engineering (ISA), RWTH Aachen University, Aachen 52056, Germany
| | - Huu Hao Ngo
- Faculty of Engineering, University of Technology Sydney, Sydney 2007, Australia
| | - Wei Lin
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China
| | - Xiao Liu
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China
| | - Bingsheng Liu
- The Second Construction Co. Ltd. of China Construction Third Engineering Bureau, China
| | - Guibai Li
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China
| | - An Ding
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China.
| |
Collapse
|
2
|
Sun X, Yuan J, Zhu Q, Sun Y, Chen H, Liao S, Yan J, Cai J, Wei Y, Luo L. Wood Fiber-Based Triboelectric Material with High Filtration Efficiency and Antibacterial Properties and Its Respiratory Monitoring in Mask. ACS OMEGA 2024; 9:33643-33651. [PMID: 39130594 PMCID: PMC11308075 DOI: 10.1021/acsomega.4c01906] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/27/2024] [Revised: 06/07/2024] [Accepted: 06/11/2024] [Indexed: 08/13/2024]
Abstract
Self-powered wearable electronic products have rapidly advanced in the fields of sensing and health monitoring, presenting greater challenges for triboelectric materials. The limited surface polarity and structural defects in wood fibers restrict their potential as substitutes for petroleum-based materials. This study used bagasse fiber as the raw material and explored various methods, including functionalizing cellulose nanofibrils (CNFs) with polydopamine (PDA), in situ embedding of silver particles, filtration, and freeze-drying. These methods aimed to enhance the triboelectric output, antibacterial properties, and filtration properties of lignocellulosic materials. The Ag/PDA/CNF-based triboelectric nanogenerator (TENG) demonstrated an open-circuit voltage of 211 V and a short-circuit current of 18.1 μA. An aerogel prepared by freeze-drying the Ag/PDA/CNF material, combined with a polyvinylidene fluoride nanofiber structure fabricated by electrospinning, constitutes the TENG unit. A self-powered respiratory detection mask was created using this combination, achieving a filtration efficiency of 94.23% for 0.3 μm particles and an antibacterial rate exceeding 99%. In addition, it effectively responded to respiratory frequency signals of slow breathing, normal breathing, and shortness of breath, with the output electrical signal correlating with the respiratory frequency. This study considerably contributes to advancing wood fiber-based triboelectric materials as alternatives to petroleum-derived materials in self-powered wearable electronic products for medical applications.
Collapse
Affiliation(s)
- Xiaoping Sun
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Juan Yuan
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Qiuxiao Zhu
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Yanfen Sun
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Haoqiu Chen
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Shuangli Liao
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Jiaxuan Yan
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Jiecheng Cai
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Yuhe Wei
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| | - Lianxin Luo
- Guangxi
Key Laboratory of Clean Pulp & Papermaking and Pollution Control,
School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Industrial
and Food Engineering, Guangxi University, Nanning 530004, China
| |
Collapse
|
3
|
Yan S, Qiu Y. Improving Hemocompatibility of Polysulfone Membrane by UV-Assisted Grafting of Sulfonated Chitosan. Polymers (Basel) 2024; 16:1555. [PMID: 38891507 PMCID: PMC11174723 DOI: 10.3390/polym16111555] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2024] [Revised: 05/22/2024] [Accepted: 05/29/2024] [Indexed: 06/21/2024] Open
Abstract
The most prevalent type of hemodialysis membrane is polysulfone (PSf). However, due to inadequate biocompatibility, it significantly compromises the safety of dialysis for patients. In this study, we modify the surface of the PSf membrane with 2,4-dihydroxybenzophenone (DBPh) groups to serve as anchoring sites during UV irradiation. Subsequently, a tailored sulfonated dihydroxy propyl chitosan (SDHPCS) is grafted onto the modified PSf membrane to compensate for the deficiencies in hydrophilic additives. The modified PSf membrane exhibits outstanding hydrophilicity and stability, as demonstrated by its characterization and evaluation. This paper focuses on investigating the interaction between platelet membrane formation, protein adsorption, and anticoagulant activity. The results show that the modified PSf membrane exhibits remarkable enhancement in surface hydrophilicity, leading to a significant reduction in protein and platelet adsorption as well as adhesion.
Collapse
Affiliation(s)
| | - Yunren Qiu
- College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China;
| |
Collapse
|
4
|
Zhang J, Lv S, Zhao X, Ma S, Zhou F. Functional Zwitterionic Polyurethanes: State-of-the-Art Review. Macromol Rapid Commun 2024; 45:e2300606. [PMID: 38087799 DOI: 10.1002/marc.202300606] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2023] [Revised: 12/01/2023] [Indexed: 12/22/2023]
Abstract
Recent advancements in bioengineering and medical devices have been greatly influenced and dominated by synthetic polymers, particularly polyurethanes (PUs). PUs offer customizable mechanical properties and long-term stability, but their inherent hydrophobic nature poses challenges in practically biological application processes, such as interface high friction, strong protein adsorption, and thrombosis. To address these issues, surface modifications of PUs for generating functionally hydrophilic layers have received widespread attention, but the durability of generated surface functionality is poor due to irreversible mechanical wear or biodegradation. As a result, numerous researchers have investigated bulk modification techniques to incorporate zwitterionic polymers or groups onto the main or side chains of PUs, thereby improving their hydrophilicity and biocompatibility. This comprehensive review presents an extensive overview of notable zwitterionic PUs (ZPUs), including those based on phosphorylcholine, sulfobetaine, and carboxybetaine. The review explores their wide range of biomedical applications, from blood-contacting devices to antibacterial coatings, fouling-resistant marine coatings, separation membranes, lubricated surfaces, and shape memory and self-healing materials. Lastly, the review summarizes the challenges and future prospects of ZPUs in biological applications.
Collapse
Affiliation(s)
- Jinshuai Zhang
- Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering, Yantai, 264006, China
| | - Siyao Lv
- Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering, Yantai, 264006, China
| | - Xiaoduo Zhao
- Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering, Yantai, 264006, China
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
| | - Shuanhong Ma
- Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering, Yantai, 264006, China
| | - Feng Zhou
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
| |
Collapse
|
5
|
Wu Y, Niu J, Yuan X, Liu Y, Zhai S, Zhao Y. Polydopamine and calcium functionalized fiber carrier for enhancing microbial attachment and Cr(VI) resistance. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 903:166626. [PMID: 37643709 DOI: 10.1016/j.scitotenv.2023.166626] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/01/2023] [Revised: 08/25/2023] [Accepted: 08/25/2023] [Indexed: 08/31/2023]
Abstract
The formation of biofilm determines the performance and stability of biofilm system. Increasing the hydrophilicity of the carrier surface could efficiently accelerate the attachment and growth of microorganisms. Here, the surface of polypropylene (PP) fiber carrier was modified with polydopamine (PDA) and calcium (Ca(II)) to enhance microbial attachment and toxicity resistance. The results of surface characteristic confirmed the self-polymerization of PDA and the chelation mechanism of Ca(II). Subsequently, the biofilm formation experiments were conducted in sequencing batch biofilm reactors using both normal and chromium-containing wastewater. The biofilm on the surface of the modified carrier exhibited better nitrogen removal and Cr(VI) reduction ability. The biomass of the modified carrier was significantly increased, and the maximum microbial attachment amounts in normal wastewater and chrome-containing wastewater were 1153.34 and 511.78 mg/g carrier, respectively. Furthermore, the confocal laser scanning microscope (CLSM) indicated that the modified carrier coated with PDA and Ca(II) were both biocompatible, and the cell activity was significantly increased. 16S rRNA sequencing results showed that the modified carrier efficiently enriched both denitrification bacteria (Thauera and Flavobacterium) and chrome-reducing bacteria (Simplicispira and Arenimonas) to improve system stability and Cr(VI) resistance. Microbial phenotype prediction based on BugBase analysis further verified the enrichment effect of modified carriers on microorganisms responsible for biofilm formation and oxidative stress resistance. Overall, this work proposed a novel functional carrier that could provide references for advancing the application of biofilm systems in wastewater treatment.
Collapse
Affiliation(s)
- Yichen Wu
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China
| | - Jiaojiao Niu
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China
| | - Xin Yuan
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China
| | - Yinuo Liu
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China
| | - Siyuan Zhai
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China
| | - Yingxin Zhao
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China.
| |
Collapse
|
6
|
Senusi F, Nasuha N, Husain A, Ismail S. Synthesis of catechol-amine coating solution for membrane surface modification. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:124585-124595. [PMID: 35604600 DOI: 10.1007/s11356-022-20167-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/21/2022] [Accepted: 04/05/2022] [Indexed: 06/15/2023]
Abstract
Recently, the plant polyphenols have attracted much attention for membrane modification, especially in surface coating application. In this study, the synthesis of catechol-amine coating solutions was evaluated at different pH conditions and with different concentrations of tannic acid and tetraethylenepentamine in order to determine the relationship between chemical structure and mechanism in the oxidation reaction. The reactivity of catechol and amine groups in the formulation was measured using UV-Vis spectroscopy and observation of the change in colour of the coating solutions. Then, the deposition of catechol-amine coating solutions was applied onto the hydrophobic polyvinylidene fluoride (PVDF) membrane. The formulation results show significant differences in alkaline conditions, revealing the role of catechol groups in the oxidation of polyphenolics. The reactions of quinone and amines to form crosslinks by Michael addition and Schiff base reactions were observed at different concentrations of each compound in coating solution. In addition, the negative charge of hydrophilic and underwater oleophobic-coated PVDF membrane was confirmed by surface zeta potential analysis. The morphological surface of modified membrane is rougher due to that coating deposition was also examined using scanning electron microscopy (SEM). Furthermore, the performance of modified membrane is comparable with the commercial hydrophilic membrane in terms of fluxes and separation efficiency of emulsion solution.
Collapse
Affiliation(s)
- Faraziehan Senusi
- Centre for Chemical Engineering Studies, Universiti Teknologi MARA, Cawangan Pulau Pinang, 13500, Permatang Pauh, Pulau Pinang, Malaysia
- School of Chemical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300, Nibong Tebal, Pulau Pinang, Malaysia
| | - Norhaslinda Nasuha
- Centre for Chemical Engineering Studies, Universiti Teknologi MARA, Cawangan Pulau Pinang, 13500, Permatang Pauh, Pulau Pinang, Malaysia
| | - Ahmad Husain
- Department of Chemistry, DAV University, Jalandhar, Punjab, 144012, India
| | - Suzylawati Ismail
- School of Chemical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300, Nibong Tebal, Pulau Pinang, Malaysia.
| |
Collapse
|
7
|
Zhao Y, He R, Zang J, Yin W, Su R, Xiong W, Xu W, Zhang J, Liu Y, Ren T, Huang Y, Li Y. Pathologically catalyzed physical coating restores the intestinal barrier for inflammatory bowel disease therapy. J Nanobiotechnology 2023; 21:444. [PMID: 37996883 PMCID: PMC10668504 DOI: 10.1186/s12951-023-02227-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2023] [Accepted: 11/19/2023] [Indexed: 11/25/2023] Open
Abstract
Intestinal epithelia impairment of inflammatory bowel disease (IBD) leads to the leakage of bacteria and antigens and the consequent persistent immune imbalance. Restoring the epithelial barrier is a promising therapeutic target but lacks effective and safe clinical interventions. By identifying the catalase (CAT) presence in the IBD pathological environment, we herein develop a CAT-catalyzed pathologically coating on the damaged epithelial barrier to inhibit intestinal leakage for IBD therapy. With the codelivery of CaO2 (a CAT substrate) and dopamine, the nanosystem can enable CAT-catalyzed oxygen (O2) production and in-situ polymerization of dopamine and then yield a thin and integrative polydopamine (PDA) coating on the intestinal barrier due to the highly adhesive property of PDA. In vivo study demonstrates that PDA coating provides not only a protective barrier by restricting intestinal leakage but also a favorable anti-inflammation effect. Beyond drug management, this work provides a physical repair strategy via catalyzed coating for IBD therapy.
Collapse
Affiliation(s)
- Yuge Zhao
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China
| | - Ruiqing He
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China
| | - Jie Zang
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China
| | - Weimin Yin
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China
| | - Runping Su
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China
| | - Wei Xiong
- State Key Laboratory of Drug Research, Shanghai Institute of Materia Medica, Chinese Academy of Sciences, Shanghai, 201203, China
| | - Weihua Xu
- State Key Laboratory of Drug Research, Shanghai Institute of Materia Medica, Chinese Academy of Sciences, Shanghai, 201203, China
| | - Jiaxin Zhang
- State Key Laboratory of Drug Research, Shanghai Institute of Materia Medica, Chinese Academy of Sciences, Shanghai, 201203, China
| | - Yiqiong Liu
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China
| | - Tianbin Ren
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China
| | - Yongzhuo Huang
- State Key Laboratory of Drug Research, Shanghai Institute of Materia Medica, Chinese Academy of Sciences, Shanghai, 201203, China.
| | - Yongyong Li
- Shanghai Tenth People's Hospital, The Institute for Biomedical Engineering & Nano Science (iNANO), School of Medicine, Tongji University, Shanghai, 200092, China.
| |
Collapse
|
8
|
Li R, Fan H, Zhou H, Chen Y, Yu Q, Hu W, Liu GL, Huang L. Nanozyme-Catalyzed Metasurface Plasmon Sensor-Based Portable Ultrasensitive Optical Quantification Platform for Cancer Biomarker Screening. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2301658. [PMID: 37358326 PMCID: PMC10460869 DOI: 10.1002/advs.202301658] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/16/2023] [Revised: 04/24/2023] [Indexed: 06/27/2023]
Abstract
Developing plasmonic biosensors that are low-cost, portable, and relatively simple to operate remains challenging. Herein, a novel metasurface plasmon-etch immunosensor is described, namely a nanozyme-linked immunosorbent surface plasmon resonance biosensor, for the ultrasensitive and specific detection of cancer biomarkers. Gold-silver composite nano cup array metasurface plasmon resonance chip and artificial nanozyme-labeled antibody are used in two-way sandwich analyte detection. Changes in the biosensor's absorption spectrum are measured before and after chip surface etching, which can be applied to immunoassays without requiring separation or amplification. The device achieved a limit of alpha-fetoprotein (AFP) detection < 21.74 fM, three orders of magnitude lower than that of commercial enzyme-linked immunosorbent assay kits. Additionally, carcinoembryonic antigen (CEA) and carbohydrate antigen 125 (CA125) are used for quantitative detection to verify the universality of the platform. More importantly, the accuracy of the platform is verified using 60 clinical samples; compared with the hospital results, the three biomarkers achieve high sensitivity (CEA: 95.7%; CA125: 90.9%; AFP: 86.7%) and specificity (CEA: 97.3%; CA125: 93.9%; AFP: 97.8%). Due to its rapidity, ease of use, and high throughput, the platform has the potential for high-throughput rapid detection to facilitate cancer screening or early diagnostic testing in biosensing.
Collapse
Affiliation(s)
- Rui Li
- College of Life Science and TechnologyHuazhong University of Science and Technology1037 Luo Yu RoadWuhan430074P. R. China
| | - Hongli Fan
- College of Life Science and TechnologyHuazhong University of Science and Technology1037 Luo Yu RoadWuhan430074P. R. China
| | - Hanlin Zhou
- Biosensor R&D DepartmentLiangzhun (Wuhan) Life Technology Co., Ltd.666 Gaoxin AvenueWuhan430070P. R. China
| | - Youqian Chen
- College of Life Science and TechnologyHuazhong University of Science and Technology1037 Luo Yu RoadWuhan430074P. R. China
| | - Qingcai Yu
- School of Life and Health ScienceAnhui Science and Technology UniversityFengyang233100P. R. China
| | - Wenjun Hu
- College of Life Science and TechnologyHuazhong University of Science and Technology1037 Luo Yu RoadWuhan430074P. R. China
| | - Gang L. Liu
- College of Life Science and TechnologyHuazhong University of Science and Technology1037 Luo Yu RoadWuhan430074P. R. China
| | - Liping Huang
- College of Life Science and TechnologyHuazhong University of Science and Technology1037 Luo Yu RoadWuhan430074P. R. China
- Biosensor R&D DepartmentLiangzhun (Wuhan) Life Technology Co., Ltd.666 Gaoxin AvenueWuhan430070P. R. China
| |
Collapse
|
9
|
Fu L, Deng S, Luo Y, Fu Q, Fan Y, Jia L. An ultrasensitive colorimetric biosensor for the detection of Gram-positive bacteria by integrating paper-based enrichment and carbon dot-based selective recognition. Talanta 2023; 265:124920. [PMID: 37451123 DOI: 10.1016/j.talanta.2023.124920] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2023] [Revised: 06/20/2023] [Accepted: 07/05/2023] [Indexed: 07/18/2023]
Abstract
Rapid screening of bacteria by low-cost and eco-friendly material-based approaches is still a major challenge. Herein, a colorimetric biosensor was designed for the ultrasensitive and rapid detection of Gram-positive bacteria. The biosensor exploited polydopamine and polyethyleneimine (PDA-PEI)-modified papers for separating bacteria and carbon dots (CDs) for selective colorimetric detection of Gram-positive bacteria. Noble metal-free CDs can target Gram-positive bacteria by binding with peptidoglycan and possess peroxidase-like activity. Thus, they can avert the step of modifying recognition probes, facilitating biosensor fabrication, and reducing the cost. This biosensor can detect S. aureus as low as 1 cfu mL-1, L. monocytogenes as low as 5 cfu mL-1, and B. subtilis as low as 9 cfu mL-1 within 55 min. In addition, a portable device was constructed to enable convenient and on-site quantitative detection of Gram-positive bacteria. The feasibility of the biosensor was verified by detecting Gram-positive bacteria in eggshell and sausage samples with recoveries ranging from 91.2% to 110%.
Collapse
Affiliation(s)
- Li Fu
- Ministry of Education Key Laboratory of Laser Life Science & Guangdong Provincial Key Laboratory of Laser Life Science & Guangzhou Key Laboratory of Spectral Analysis and Functional Probes, College of Biophotonics, South China Normal University, Guangzhou, 510631, China
| | - Suqi Deng
- Ministry of Education Key Laboratory of Laser Life Science & Guangdong Provincial Key Laboratory of Laser Life Science & Guangzhou Key Laboratory of Spectral Analysis and Functional Probes, College of Biophotonics, South China Normal University, Guangzhou, 510631, China
| | - Yimin Luo
- Ministry of Education Key Laboratory of Laser Life Science & Guangdong Provincial Key Laboratory of Laser Life Science & Guangzhou Key Laboratory of Spectral Analysis and Functional Probes, College of Biophotonics, South China Normal University, Guangzhou, 510631, China
| | - Qiang Fu
- Ministry of Education Key Laboratory of Laser Life Science & Guangdong Provincial Key Laboratory of Laser Life Science & Guangzhou Key Laboratory of Spectral Analysis and Functional Probes, College of Biophotonics, South China Normal University, Guangzhou, 510631, China
| | - Yi Fan
- Ministry of Education Key Laboratory of Laser Life Science & Guangdong Provincial Key Laboratory of Laser Life Science & Guangzhou Key Laboratory of Spectral Analysis and Functional Probes, College of Biophotonics, South China Normal University, Guangzhou, 510631, China
| | - Li Jia
- Ministry of Education Key Laboratory of Laser Life Science & Guangdong Provincial Key Laboratory of Laser Life Science & Guangzhou Key Laboratory of Spectral Analysis and Functional Probes, College of Biophotonics, South China Normal University, Guangzhou, 510631, China.
| |
Collapse
|
10
|
Guo J, Xiong X, Zeng J, Liu Q, Wang Q, Liu G, Wei N, Wang Y, Wu Y. Preparation and antifouling performance of low-pressure carbon nanotube membranes based on polydopamine biomimetic modification. Colloids Surf B Biointerfaces 2023; 228:113398. [PMID: 37320979 DOI: 10.1016/j.colsurfb.2023.113398] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2023] [Revised: 05/30/2023] [Accepted: 06/08/2023] [Indexed: 06/17/2023]
Abstract
In order to investigate the antifouling performance of low-pressure carbon nanotube membranes based on polydopamine (PDA) biomimetic modification, layered multi-walled carbon nanotubes PDA membrane (layered MWCNTs-PDA) and PDA blended MWCNTs membrane (blended PDA/MWCNTs) were prepared. The MWCNTs membranes' antifouling performance and recoverability was significantly improved in filtrating BSA, HA and SA after PDA biomimetic modification, and the total fouling and irreversible fouling were all decreased. Compared with the blended PDA/MWCNTs membrane, the layered MWCNTs-PDA membrane had higher antifouling property as it further improved the electronegativity and hydrophilicity of membrane surface. In addition, denser surface pore size of the layered MWCNTs-PDA membrane can effectively reduce the fouling by trapping foulants on its surface. The combination of PDA biomimetic modification with MWCNTs membrane had a superior antifouling performance and rejection performance in processing NOM and artificial wastewater, and the majority of humic-like foulants could be excluded by the layered MWCNTs-PDA membrane. PDA biomimetic modification alleviated the adhesion of FITC-BSA on the MWCNTs membrane. The layered MWCNTs-PDA membrane especially alleviated the attachment of bacteria and processed excellent antimicrobial ability for bacteria.
Collapse
Affiliation(s)
- Jin Guo
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China.
| | - Xinya Xiong
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| | - Jia Zeng
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| | - Qiushan Liu
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| | - Qingshan Wang
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| | - Guohan Liu
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| | - Na Wei
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| | - Yufei Wang
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| | - Yaochen Wu
- National Engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse Technology, Beijing University of Technology, Ping Leyuan No.100, Beijing 100124, China
| |
Collapse
|
11
|
Shan T, Ma X, Li H, Liu C, Shen C, Yang P, Li S, Wang Z, Liu Z, Sun H. Plant-derived hybrid coatings as adsorption layers for uranium adsorption from seawater with high performance. J Memb Sci 2023. [DOI: 10.1016/j.memsci.2023.121547] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/05/2023]
|
12
|
Sun Y, Zheng L, Feng Q, Xie X, Yong Z, He J, Yang L, Zhao X. In situ surface modification of forward osmosis membrane by polydopamine/polyethyleneimine-silver nanoparticle for anti-fouling improvement in municipal wastewater treatment. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2023; 87:2195-2209. [PMID: 37186624 PMCID: wst_2023_115 DOI: 10.2166/wst.2023.115] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
In this work, we demonstrate the surface functionalization of cellulose triacetate membrane with co-deposition of polydopamine (PDA)/polyethyleneimine (PEI) and silver nanoparticles (AgNPs) for antifouling property in municipal wastewater treatment. PDA/PEI was first coated on the membrane surface by single-step co-deposition, while AgNPs were formed in situ through catechol groups of PDA immobilizing silver ions and subsequently reducing. The successful surface modification was verified by different membrane characterization techniques. The modified PDA/PEI-nAg CTA membrane exhibits enhanced hydrophilicity and improved antiadhesion and antimicrobial activity. Furthermore, the functional layer had an indistinctive effect on the membrane transport parameters. In addition, dynamic forward osmosis (FO) fouling experiment with raw municipal wastewater as feed solution indicated that the PDA/PEI-nAg CTA membrane exhibited notably lower water flux decrease compared to the nascent CTA membrane. The results of confocal laser scanning microscopy (CLSM) showed that PDA/PEI-nAg CTA membranes effectively reduced the adsorption of organic foulants (proteins and polysaccharides) and inhibited the formation and development of the fouling layer. The membrane surface modification of the CTA membrane with PDA/PEI and AgNPs efficiently mitigated membrane fouling in municipal wastewater treatment.
Collapse
Affiliation(s)
- Yan Sun
- School of Civil Engineering, Chang'an University, Xi'an 710061, China E-mail:
| | - Lu Zheng
- School of Civil Engineering, Chang'an University, Xi'an 710061, China E-mail:
| | - Qianying Feng
- School of Civil Engineering, Chang'an University, Xi'an 710061, China E-mail:
| | - Xiaoyang Xie
- School of Civil Engineering, Chang'an University, Xi'an 710061, China E-mail:
| | - Zixin Yong
- China Northwest Architecture Design and Research Institute Co., Ltd, Xi'an 710018, China
| | - Jiaojie He
- School of Civil Engineering, Chang'an University, Xi'an 710061, China E-mail:
| | - Liwei Yang
- School of Civil Engineering, Chang'an University, Xi'an 710061, China E-mail:
| | - Xiaohong Zhao
- School of Civil Engineering, Chang'an University, Xi'an 710061, China E-mail:
| |
Collapse
|
13
|
Wu D, Lei J, Zhang Z, Huang F, Buljan M, Yu G. Polymerization in living organisms. Chem Soc Rev 2023; 52:2911-2945. [PMID: 36987988 DOI: 10.1039/d2cs00759b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/30/2023]
Abstract
Vital biomacromolecules, such as RNA, DNA, polysaccharides and proteins, are synthesized inside cells via the polymerization of small biomolecules to support and multiply life. The study of polymerization reactions in living organisms is an emerging field in which the high diversity and efficiency of chemistry as well as the flexibility and ingeniousness of physiological environment are incisively and vividly embodied. Efforts have been made to design and develop in situ intra/extracellular polymerization reactions. Many important research areas, including cell surface engineering, biocompatible polymerization, cell behavior regulation, living cell imaging, targeted bacteriostasis and precise tumor therapy, have witnessed the elegant demeanour of polymerization reactions in living organisms. In this review, recent advances in polymerization in living organisms are summarized and presented according to different polymerization methods. The inspiration from biomacromolecule synthesis in nature highlights the feasibility and uniqueness of triggering living polymerization for cell-based biological applications. A series of examples of polymerization reactions in living organisms are discussed, along with their designs, mechanisms of action, and corresponding applications. The current challenges and prospects in this lifeful field are also proposed.
Collapse
Affiliation(s)
- Dan Wu
- Key Laboratory of Bioorganic Phosphorus Chemistry & Chemical Biology, Department of Chemistry, Tsinghua University, Beijing 100084, P. R. China.
- College of Materials Science and Engineering, Zhejiang University of Technology Hangzhou, 310014, P. R. China
| | - Jiaqi Lei
- Key Laboratory of Bioorganic Phosphorus Chemistry & Chemical Biology, Department of Chemistry, Tsinghua University, Beijing 100084, P. R. China.
| | - Zhankui Zhang
- College of Materials Science and Engineering, Zhejiang University of Technology Hangzhou, 310014, P. R. China
| | - Feihe Huang
- Stoddart Institute of Molecular Science, Department of Chemistry, Zhejiang University, Hangzhou 310027, P. R. China.
- ZJU-Hangzhou Global Scientific and Technological Innovation Center, Hangzhou, 311215, P. R. China
| | - Marija Buljan
- Empa, Swiss Federal Laboratories for Materials Science and Technology, 9014 St. Gallen, Switzerland
| | - Guocan Yu
- Key Laboratory of Bioorganic Phosphorus Chemistry & Chemical Biology, Department of Chemistry, Tsinghua University, Beijing 100084, P. R. China.
- School of Medicine, Tsinghua University, Beijing 100084, P. R. China
| |
Collapse
|
14
|
Zhao H, Qi Y, Zhan P, Zhu Q, Liu X, Guan X, Zhang C, Su C, Qin P, Cai D. Artificial Photoenzymatic Reduction of Carbon Dioxide to Methanol by Using Electron Mediator and Co-factorAssembled ZnIn 2 S 4 Nanoflowers. CHEMSUSCHEM 2023:e202300061. [PMID: 36847586 DOI: 10.1002/cssc.202300061] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/14/2023] [Revised: 02/27/2023] [Indexed: 06/18/2023]
Abstract
Increased absorption of visible light, low electron-hole recombination, and fast electron transfer are the major objectives for highly effective photocatalysts in biocatalytic artificial photosynthetic systems. In this study, a polydopamine (PDA) layer containing electron mediator, [M], and NAD+ cofactor was assembled on the outer surface of ZnIn2 S4 nanoflower, and the as-prepared nanoparticle, ZnIn2 S4 /PDA@poly/[M]/NAD+ , was used for photoenzymatic methanol production from CO2 . Because of effective capturing of visible light, reduced distance of electron transfer, and elimination of electron-holes recombination, a high NADH regeneration of 80.7±1.43 % could be obtained using the novel ZnIn2 S4 /PDA@poly/[M]/NAD+ . In the artificial photosynthesis system, a maximum methanol production of 116.7±11.8 μm was obtained. The enzymes and nanoparticles in the hybrid bio-photocatalysis system could be easily recovered using the ultrafiltration membrane at the bottom of the photoreactor. This is due to the successful immobilization of the small blocks including the electron mediator and cofactor on the surface of the photocatalyst. The ZnIn2 S4 /PDA@poly/[M]/NAD+ photocatalyst exhibited good stability and recyclability for methanol production. The novel concept presented in this study shows great promise for other sustainable chemical productions through artificial photoenzymatic catalysis.
Collapse
Affiliation(s)
- Hongqing Zhao
- National Energy R&D Center for Biorefinery, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Yanou Qi
- School of International Education, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
- College of Chemistry, Liaoning University, Shenyang, 110036, P. R. China
| | - Peng Zhan
- National Energy R&D Center for Biorefinery, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Qian Zhu
- National Energy R&D Center for Biorefinery, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Xiangshi Liu
- College of Life Science and Technology, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Xinyao Guan
- College of Life Science and Technology, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Chenxi Zhang
- National Energy R&D Center for Biorefinery, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Changsheng Su
- National Energy R&D Center for Biorefinery, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Peiyong Qin
- College of Life Science and Technology, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| | - Di Cai
- National Energy R&D Center for Biorefinery, Beijing University of Chemical Technology, Beijing, 100029, P. R. China
| |
Collapse
|
15
|
Kang JI, Park KM. Oxygen-supplying syringe to create hyperoxia-inducible hydrogels for in situ tissue regeneration. Biomaterials 2023; 293:121943. [PMID: 36527790 DOI: 10.1016/j.biomaterials.2022.121943] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2022] [Revised: 11/28/2022] [Accepted: 12/03/2022] [Indexed: 12/12/2022]
Abstract
Recent trends in the design of regenerative materials include the development of bioactive matrices to harness the innate healing ability of the body using various biophysicochemical stimuli (defined as in situ tissue regeneration). Among these, hyperoxia (>21% pO2) is a well-known therapeutic factor for promoting tissue regeneration, such as immune cell recruitment, cell proliferation, angiogenesis, and fibroblast differentiation into myofibroblast. Although various strategies to induce hyperoxia are reported, developing advanced hyperoxia-inducing biomaterials for tissue regeneration is still challenging. In this study, a catalase-immobilized syringe (defined as an Oxyringe) via calcium peroxide-mediated surface modification is developed as a new type of oxygen-supplying system. Hyperoxia-inducible hydrogels are fabricated utilizing Oxyringe. This hydrogel plays a role as a physical barrier for hemostasis. In addition, hyperoxic matrices induce transient hyperoxia in vivo (up to 46.0% pO2). Interestingly, the hydrogel-induced hyperoxia boost the initial macrophage recruitment and rapid inflammation resolution. Furthermore, hyperoxic oxygen release of hydrogels facilitates neovascularization and cell proliferation involved in the proliferation phase, expediting tissue maturation related to the remodeling phase in wound healing. In summary, Oxyringe has excellent potential as an advanced oxygen-supplying platform to create hyperoxia-inducing hydrogels for in situ tissue regeneration.
Collapse
Affiliation(s)
- Jeon Il Kang
- Department of Bioengineering and Nano-Bioengineering, College of Life Sciences and Bioengineering, Incheon National University, 119 Academy-ro, Yeonsu-gu, Incheon, 22012, Republic of Korea
| | - Kyung Min Park
- Department of Bioengineering and Nano-Bioengineering, College of Life Sciences and Bioengineering, Incheon National University, 119 Academy-ro, Yeonsu-gu, Incheon, 22012, Republic of Korea; Research Center for Bio Materials & Process Development, Incheon National University, 119 Academy-ro, Yeonsu-gu, Incheon, 22012, Republic of Korea.
| |
Collapse
|
16
|
Advances in the One-Step Approach of Polymeric Materials Using Enzymatic Techniques. Polymers (Basel) 2023; 15:polym15030703. [PMID: 36772002 PMCID: PMC9922006 DOI: 10.3390/polym15030703] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/27/2022] [Revised: 01/23/2023] [Accepted: 01/27/2023] [Indexed: 01/31/2023] Open
Abstract
The formulation in which biochemical enzymes are administered in polymer science plays a key role in retaining their catalytic activity. The one-step synthesis of polymers with highly sequence-controlled enzymes is a strategy employed to provide enzymes with higher catalytic activity and thermostability in material sustainability. Enzyme-catalyzed chain growth polymerization reactions using activated monomers, protein-polymer complexation techniques, covalent and non-covalent interaction, and electrostatic interactions can provide means to develop formulations that maintain the stability of the enzyme during complex material processes. Multifarious applications of catalytic enzymes are usually attributed to their efficiency, pH, and temperature, thus, progressing with a critical structure-controlled synthesis of polymer materials. Due to the obvious economics of manufacturing and environmental sustainability, the green synthesis of enzyme-catalyzed materials has attracted significant interest. Several enzymes from microorganisms and plants via enzyme-mediated material synthesis have provided a viable alternative for the appropriate synthesis of polymers, effectively utilizing the one-step approach. This review analyzes more and deeper strategies and material technologies widely used in multi-enzyme cascade platforms for engineering polymer materials, as well as their potential industrial applications, to provide an update on current trends and gaps in the one-step synthesis of materials using catalytic enzymes.
Collapse
|
17
|
Qie R, Zajforoushan Moghaddam S, Thormann E. Dopamine-Assisted Layer-by-Layer Deposition Providing Coatings with Controlled Thickness, Roughness, and Functional Properties. ACS OMEGA 2023; 8:2965-2972. [PMID: 36713736 PMCID: PMC9878624 DOI: 10.1021/acsomega.2c05620] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Accepted: 12/29/2022] [Indexed: 06/18/2023]
Abstract
In this study, dopamine-assisted deposition combined with layer-by-layer assembly was investigated as an efficient method for preparing coatings with tunable thickness, roughness, and functional properties. By this method, one can first benefit from the versatile chemistry of dopamine allowing the co-deposition of various functional materials, for example, polymers, ions, and nanoparticles, within the coating. Moreover, the layer-by-layer approach allows tuning the coating thickness and surface roughness, as well as varying the chemical composition of the coating in the vertical direction. Herein, we demonstrated the benefits of using this method in fabricating both single- and multi-component coatings.
Collapse
|
18
|
Chen J, Yu B, Cong H, Shen Y. Recent development and application of membrane chromatography. Anal Bioanal Chem 2023; 415:45-65. [PMID: 36131143 PMCID: PMC9491666 DOI: 10.1007/s00216-022-04325-8] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Revised: 08/29/2022] [Accepted: 09/05/2022] [Indexed: 01/11/2023]
Abstract
Membrane chromatography is mainly used for the separation and purification of proteins and biological macromolecules in the downstream processing process, also applications in sewage disposal. Membrane chromatography is recognized as an effective alternative to column chromatography because it significantly improves chromatography from affinity, hydrophobicity, and ion exchange; the development status of membrane chromatography in membrane matrix and membrane equipment is thoroughly discussed, and the applications of protein capture and intermediate purification, virus, monoclonal antibody purification, water treatment, and others are summarized. This review will provide value for the exploration and potential application of membrane chromatography.
Collapse
Affiliation(s)
- Jing Chen
- Institute of Biomedical Materials and Engineering, College of Materials Science and Engineering, College of Chemistry and Chemical Engineering, Qingdao University, Qingdao, 266071, China
| | - Bing Yu
- Institute of Biomedical Materials and Engineering, College of Materials Science and Engineering, College of Chemistry and Chemical Engineering, Qingdao University, Qingdao, 266071, China
- State Key Laboratory of Bio-Fibers and Eco-Textiles, Qingdao University, Qingdao, 266071, China
| | - Hailin Cong
- Institute of Biomedical Materials and Engineering, College of Materials Science and Engineering, College of Chemistry and Chemical Engineering, Qingdao University, Qingdao, 266071, China.
- State Key Laboratory of Bio-Fibers and Eco-Textiles, Qingdao University, Qingdao, 266071, China.
| | - Youqing Shen
- Institute of Biomedical Materials and Engineering, College of Materials Science and Engineering, College of Chemistry and Chemical Engineering, Qingdao University, Qingdao, 266071, China
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, Center for Bionanoengineering, and Department of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, Zhejiang, China
| |
Collapse
|
19
|
Zhang Z, Wang Y, Li Z, Fu H, Huang J, Xu Z, Lai Y, Qian X, Zhang S. Sustainable Hierarchical-Pored PAAS-PNIPAAm Hydrogel with Core-Shell Structure Tailored for Highly Efficient Atmospheric Water Harvesting. ACS APPLIED MATERIALS & INTERFACES 2022; 14:55295-55306. [PMID: 36454694 DOI: 10.1021/acsami.2c19840] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
As an effective way to obtain freshwater resources, atmospheric water harvesting (AWH) technology has been a wide concern of researchers. Therefore, hydrogels gradually become key materials for atmospheric water harvesters due to their high specific surface area and three-dimensional porous structure. Here, we construct a core-shell hydrogel-based atmospheric water harvesting material consisting of a shell sodium polyacrylate (PAAS) hydrogel with an open pore structure and a core thermosensitive poly N-isopropylacrylamide (PNIPAAm) hydrogel with a large pore size. Theoretically, the mutual synergistic hygroscopic effect between the core layer and the shell layer accelerates the capture, transport, and storage of moisture to achieve continuous and high-capacity moisture adsorption. Simultaneously, the integration of polydopamine (PDA) with the hydrogel realizes solar-driven photothermal evaporation. Therefore, the prepared core-shell hydrogel material possesses great advantages in water adsorption capacity and water desorption capacity with an adsorption of 2.76 g g-1 (90% RH) and a desorption of 1.42 kg m-2 h-1. Additionally, the core-shell structure hydrogel collects 1.31 g g-1 day-1 of fresh water in outdoor experiments, which verifies that this core-shell hydrogel with integrated photothermal properties can capture moisture in a wide range of humidity without any external energy consumption, can further sustainably obtain fresh water in remote water-shortage areas.
Collapse
Affiliation(s)
- Zhibin Zhang
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes, School of Textile Science and Engineering, Tiangong University, Tianjin300387, P. R. China
| | - Yajun Wang
- Agro-Environment Protection Institute of the Ministry of Agriculture, Tianjin300191, P. R. China
| | - Zheng Li
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes, School of Textile Science and Engineering, Tiangong University, Tianjin300387, P. R. China
| | - Hiroshi Fu
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes, School of Textile Science and Engineering, Tiangong University, Tianjin300387, P. R. China
| | - Jianying Huang
- National Engineering Research Center of Chemical Fertilizer Catalyst (NERC-CFC), College of Chemical Engineering, Fuzhou University, Fuzhou350116, P. R. China
| | - Zhiwei Xu
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes, School of Textile Science and Engineering, Tiangong University, Tianjin300387, P. R. China
| | - Yuekun Lai
- National Engineering Research Center of Chemical Fertilizer Catalyst (NERC-CFC), College of Chemical Engineering, Fuzhou University, Fuzhou350116, P. R. China
| | - Xiaoming Qian
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes, School of Textile Science and Engineering, Tiangong University, Tianjin300387, P. R. China
| | - Songnan Zhang
- State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes, School of Textile Science and Engineering, Tiangong University, Tianjin300387, P. R. China
| |
Collapse
|
20
|
One-step rapid co-deposition of oxidant induced mussel-polyphenol coating on PVDF substrate for separating oily water. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.122304] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
|
21
|
A new and low-cost surface-functionalized corn straw adsorbent for adsorptive removal of sodium dodecylbenzene sulfonate: Adsorbent preparation and adsorption performance. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.122999] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
|
22
|
Tian C, Chen J, Li X, Dai R, Wang Z. Chemical cleaning−solvent treatment−hydrophilic modification strategy for regenerating end-of-life PVDF membrane. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.121325] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
23
|
Mi YF, Huang YH, He SH, Cao ZH, Shentu BQ. Promoted deposition of polydopamine by carbon quantum dots to construct loose nanofiltration membranes. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130871] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
24
|
Arshad Z, Ali SA. Synthesis and anticorrosive application of biomimetic dopamine-based cationic polyelectrolytes derived from diallylammonium salts. POLYMER 2022. [DOI: 10.1016/j.polymer.2022.125537] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
25
|
Martinez J, Fan S, Rabade S, Blevins AK, Fung K, Killgore JP, Perez SB, Youngbear K, Carbrello C, Foley S, Ding X, Long R, Castro R, Ding Y. Capillary infiltration kinetics in highly asymmetric porous membranes and the resulting debonding behaviors. POLYMER 2022. [DOI: 10.1016/j.polymer.2022.125529] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
26
|
Wang W, Li PF, Xie R, Ju XJ, Liu Z, Chu LY. Designable Micro-/Nano-Structured Smart Polymeric Materials. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2107877. [PMID: 34897843 DOI: 10.1002/adma.202107877] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2021] [Revised: 11/28/2021] [Indexed: 06/14/2023]
Abstract
Smart polymeric materials with dynamically tunable physico-chemical characteristics in response to changes of environmental stimuli, have received considerable attention in myriad fields. The diverse combination of their micro-/nano-structural and molecular designs creates promising and exciting opportunities for exploiting advanced smart polymeric materials. Engineering micro-/nano-structures into smart polymeric materials with elaborate molecular design enables intricate coordination between their structures and molecular-level response to cooperatively realize smart functions for practical applications. In this review, recent progresses of smart polymeric materials that combine micro-/nano-structures and molecular design to achieve designed advanced functions are highlighted. Smart hydrogels, gating membranes, gratings, milli-particles, micro-particles and microvalves are employed as typical examples to introduce their design and fabrication strategies. Meanwhile, the key roles of interplay between their micro-/nano-structures and responsive properties to realize the desired functions for their applications are emphasized. Finally, perspectives on the current challenges and opportunities of micro-/nano-structured smart polymeric materials for their future development are presented.
Collapse
Affiliation(s)
- Wei Wang
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
- State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Ping-Fan Li
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Rui Xie
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
- State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Xiao-Jie Ju
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
- State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Zhuang Liu
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
- State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| | - Liang-Yin Chu
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
- State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China
| |
Collapse
|
27
|
Nazari S, Abdelrasoul A. Impact of Membrane Modification and Surface Immobilization Techniques on the Hemocompatibility of Hemodialysis Membranes: A Critical Review. MEMBRANES 2022; 12:1063. [PMID: 36363617 PMCID: PMC9698264 DOI: 10.3390/membranes12111063] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/20/2022] [Revised: 10/17/2022] [Accepted: 10/18/2022] [Indexed: 06/16/2023]
Abstract
Despite significant research efforts, hemodialysis patients have poor survival rates and low quality of life. Ultrafiltration (UF) membranes are the core of hemodialysis treatment, acting as a barrier for metabolic waste removal and supplying vital nutrients. So, developing a durable and suitable membrane that may be employed for therapeutic purposes is crucial. Surface modificationis a useful solution to boostmembrane characteristics like roughness, charge neutrality, wettability, hemocompatibility, and functionality, which are important in dialysis efficiency. The modification techniques can be classified as follows: (i) physical modification techniques (thermal treatment, polishing and grinding, blending, and coating), (ii) chemical modification (chemical methods, ozone treatment, ultraviolet-induced grafting, plasma treatment, high energy radiation, and enzymatic treatment); and (iii) combination methods (physicochemical). Despite the fact that each strategy has its own set of benefits and drawbacks, all of these methods yielded noteworthy outcomes, even if quantifying the enhanced performance is difficult. A hemodialysis membrane with outstanding hydrophilicity and hemocompatibility can be achieved by employing the right surface modification and immobilization technique. Modified membranes pave the way for more advancement in hemodialysis membrane hemocompatibility. Therefore, this critical review focused on the impact of the modification method used on the hemocompatibility of dialysis membranes while covering some possible modifications and basic research beyond clinical applications.
Collapse
Affiliation(s)
- Simin Nazari
- Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada
| | - Amira Abdelrasoul
- Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada
- Department of Chemical and Biological Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada
| |
Collapse
|
28
|
Yao Q, Zheng W, Tang X, Chen M, Liao M, Chen G, Huang W, Xia Y, Wei Y, Hu Y, Zhou W. Tannic acid/polyvinyl alcohol/2-hydroxypropyl trimethyl ammonium chloride chitosan double-network hydrogel with adhesive, antibacterial and biocompatible properties. REACT FUNCT POLYM 2022. [DOI: 10.1016/j.reactfunctpolym.2022.105384] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
29
|
Gao Y, Zhou X, Zhang M, Lyu L, Li Z. Polyphenylene Sulfide-Based Membranes: Recent Progress and Future Perspectives. MEMBRANES 2022; 12:membranes12100924. [PMID: 36295683 PMCID: PMC9607490 DOI: 10.3390/membranes12100924] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2022] [Revised: 09/12/2022] [Accepted: 09/13/2022] [Indexed: 05/09/2023]
Abstract
As a special engineering plastic, polyphenylene sulfide (PPS) can also be used to prepare membranes for membrane separation processes, adsorption, and catalytic and battery separators because of its unique properties, such as corrosion resistance, and chemical and thermal stability. Nowadays, many researchers have developed various types of PPS membranes, such as the PPS flat membrane, PPS microfiber membrane and PPS hollow fiber membrane, and have even achieved special functional modifications. In this review, the synthesis and modification of PPS resin, the formation of PPS membrane and the research progress of functional modification methods are systematically introduced, and the future perspective of PPS membrane is discussed.
Collapse
Affiliation(s)
- Yuan Gao
- School of Textile and Material Engineering, Dalian Polytechnic University, Dalian 116034, China
- Correspondence: (Y.G.); (Z.L.)
| | - Xinghai Zhou
- School of Textile and Material Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Maliang Zhang
- State Key Laboratory of Separation Membranes and Membrane Processes, National Center for International Joint Research on Separation Membranes, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, China
| | - Lihua Lyu
- School of Textile and Material Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Zhenhuan Li
- State Key Laboratory of Separation Membranes and Membrane Processes, National Center for International Joint Research on Separation Membranes, School of Materials Science and Engineering, Tiangong University, Tianjin 300387, China
- Correspondence: (Y.G.); (Z.L.)
| |
Collapse
|
30
|
Sarkari S, Khajehmohammadi M, Davari N, Li D, Yu B. The effects of process parameters on polydopamine coatings employed in tissue engineering applications. Front Bioeng Biotechnol 2022; 10:1005413. [PMID: 36172013 PMCID: PMC9512135 DOI: 10.3389/fbioe.2022.1005413] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Accepted: 08/17/2022] [Indexed: 12/12/2022] Open
Abstract
The biomaterials’ success within the tissue engineering field is hinged on the capability to regulate tissue and cell responses, comprising cellular adhesion, as well as repair and immune processes’ induction. In an attempt to enhance and fulfill these biomaterials’ functions, scholars have been inspired by nature; in this regard, surface modification via coating the biomaterials with polydopamine is one of the most successful inspirations endowing the biomaterials with surface adhesive properties. By employing this approach, favorable results have been achieved in various tissue engineering-related experiments, a significant one of which is the more rapid cellular growth observed on the polydopamine-coated substrates compared to the untreated ones; nonetheless, some considerations regarding polydopamine-coated surfaces should be taken into account to control the ultimate outcomes. In this mini-review, the importance of coatings in the tissue engineering field, the different types of surfaces requiring coatings, the significance of polydopamine coatings, critical factors affecting the result of the coating procedure, and recent investigations concerning applications of polydopamine-coated biomaterials in tissue engineering are thoroughly discussed.
Collapse
Affiliation(s)
- Soulmaz Sarkari
- Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Mehran Khajehmohammadi
- Department of Mechanical Engineering, Faculty of Engineering, Yazd University, Yazd, Iran
- Medical Nanotechnology and Tissue Engineering Research Center, Yazd Reproductive Sciences Institute, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
| | - Niyousha Davari
- Department of Life Science Engineering, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran
| | - Dejian Li
- Department of Orthopedics, Shanghai Pudong Hospital, Fudan University Pudong Medical Center, Shanghai, China
- *Correspondence: Dejian Li, ; Baoqing Yu,
| | - Baoqing Yu
- Department of Orthopedics, Shanghai Pudong New Area People’s Hospital, Shanghai, China
- *Correspondence: Dejian Li, ; Baoqing Yu,
| |
Collapse
|
31
|
Progress for Co-Incorporation of Polydopamine and Nanoparticles for Improving Membranes Performance. MEMBRANES 2022; 12:membranes12070675. [PMID: 35877880 PMCID: PMC9317275 DOI: 10.3390/membranes12070675] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/21/2022] [Revised: 06/14/2022] [Accepted: 06/15/2022] [Indexed: 02/04/2023]
Abstract
Incorporating polydopamine has become a viable method for membrane modification due to its universality and versatility. Fillers in their different categories have been confirmed as effective elements to improve the properties of membranes such as hydrophilicity, permeability, mechanical strength, and fouling resistance. Thus, this paper mainly highlights the recent studies that have been carried out using polydopamine and nanomaterial fillers simultaneously in modifying the performance of different membranes such as ultrafiltration, microfiltration, nanofiltration, reverse osmosis, and forward osmosis membranes according to the various modification methods. Graphene oxide nanoparticles have recently attracted a lot of attention among different nanoparticles used with polydopamine, due to their impressive characteristics impacts on enhancing membrane hydrophilicity, mechanical strength, and fouling resistance. Thus, the incorporation techniques of graphene oxide nanoparticles and polydopamine for enhancing membranes have been highlighted in this work. Moreover, different studies carried out on using polydopamine as a nanofiller for optimizing membrane performance have been discussed. Finally, perspectives, and possible paths of further research on mussel-inspired polydopamine and nanoparticles co-incorporation are stated according to the progress made in this field. It is anticipated that this review would provide benefits for the scientific community in designing a new generation of polymeric membranes for the treatment of different feed water and wastewater based on adhesive mussel inspired polydopamine polymer and nanomaterials combinations.
Collapse
|
32
|
Zhang S, Shen L, Deng H, Liu Q, You X, Yuan J, Jiang Z, Zhang S. Ultrathin Membranes for Separations: A New Era Driven by Advanced Nanotechnology. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2108457. [PMID: 35238090 DOI: 10.1002/adma.202108457] [Citation(s) in RCA: 24] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2021] [Revised: 02/23/2022] [Indexed: 06/14/2023]
Abstract
Ultrathin membranes are at the forefront of membrane research, offering great opportunities in revolutionizing separations with ultrafast transport. Driven by advanced nanomaterials and manufacturing technology, tremendous progresses are made over the last 15 years in the fabrications and applications of sub-50 nm membranes. Here, an overview of state-of-the-art ultrathin membranes is first introduced, followed by a summary of the fabrication techniques with an emphasis on how to realize such extremely low thickness. Then, different types of ultrathin membranes, categorized based on their structures, that is, network, laminar, or framework structures, are discussed with a focus on the interplays among structure, fabrication methods, and separation performances. Recent research and development trends are highlighted. Meanwhile, the performances and applications of current ultrathin membranes for representative separations (gas separation and liquid separation) are thoroughly analyzed and compared. Last, the challenges in material design, structure construction, and coordination are given, in order to fully realize the potential of ultrathin membranes and facilitate the translation from scientific achievements to industrial productions.
Collapse
Affiliation(s)
- Shiyu Zhang
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Liang Shen
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Hao Deng
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Qinze Liu
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
- School of Materials Science and Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, P. R. China
| | - Xinda You
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University, Tianjin, 300072, China
| | - Jinqiu Yuan
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University, Tianjin, 300072, China
| | - Zhongyi Jiang
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University, Tianjin, 300072, China
| | - Sui Zhang
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| |
Collapse
|
33
|
Ma ZY, Xue YR, Yang HC, Wu J, Xu ZK. Surface and Interface Engineering of Polymer Membranes: Where We Are and Where to Go. Macromolecules 2022. [DOI: 10.1021/acs.macromol.1c02647] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Zhao-Yu Ma
- MOE Key Lab of Macromolecular Synthesis and Functionalization, and Key Lab of Adsorption and Separation Materials & Technologies of Zhejiang Province, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
- The “Belt and Road” Sino-Portugal Joint Lab on Advanced Materials, International Research Center for X Polymers, Zhejiang University, Hangzhou 310027, China
| | - Yu-Ren Xue
- MOE Key Lab of Macromolecular Synthesis and Functionalization, and Key Lab of Adsorption and Separation Materials & Technologies of Zhejiang Province, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
- The “Belt and Road” Sino-Portugal Joint Lab on Advanced Materials, International Research Center for X Polymers, Zhejiang University, Hangzhou 310027, China
| | - Hao-Cheng Yang
- School of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China
| | - Jian Wu
- Department of Chemistry, Zhejiang University, Hangzhou 310027, China
| | - Zhi-Kang Xu
- MOE Key Lab of Macromolecular Synthesis and Functionalization, and Key Lab of Adsorption and Separation Materials & Technologies of Zhejiang Province, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
- The “Belt and Road” Sino-Portugal Joint Lab on Advanced Materials, International Research Center for X Polymers, Zhejiang University, Hangzhou 310027, China
| |
Collapse
|
34
|
Fan S, Lam Y, He L, Xin JH. Novel and Sustainable Colorants Developed via Incorporating Azo Chromophores into Dopamine Molecules. ACS OMEGA 2022; 7:11082-11091. [PMID: 35415376 PMCID: PMC8991931 DOI: 10.1021/acsomega.1c07084] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/15/2021] [Accepted: 02/24/2022] [Indexed: 06/14/2023]
Abstract
Inspired by the application of dopamine as an "anchor" and UV absorber, novel sustainable colorants with biscatecholic structure were synthesized through a simple incorporation of simple azo chromophores with dopamine. Their structures were confirmed using MS and NMR analyses, and their application on textile materials was investigated. Compared to the simple azo chromophores with almost no coloring ability on fabrics, the biscatecholic colorants could color different fabrics effectively, mainly through self-polymerization only in the presence of a trace amount of organic base at room temperature, which is environmentally friendly in terms of saving resources and alleviating chemical pollution. Meanwhile, the UV resistance of colored fabrics was enhanced significantly, showing the advantage of protecting wearers from UV damage.
Collapse
Affiliation(s)
- Suju Fan
- Institute
of Textiles & Clothing, The Hong Kong
Polytechnic University, Hong Kong, China
- Shenzhen
Research Institute, The Hong Kong Polytechnic
University, Shenzhen, China
| | - Yintung Lam
- Institute
of Textiles & Clothing, The Hong Kong
Polytechnic University, Hong Kong, China
- Shenzhen
Research Institute, The Hong Kong Polytechnic
University, Shenzhen, China
| | - Liang He
- Institute
of Textiles & Clothing, The Hong Kong
Polytechnic University, Hong Kong, China
- Shenzhen
Research Institute, The Hong Kong Polytechnic
University, Shenzhen, China
| | - John H. Xin
- Institute
of Textiles & Clothing, The Hong Kong
Polytechnic University, Hong Kong, China
- Shenzhen
Research Institute, The Hong Kong Polytechnic
University, Shenzhen, China
| |
Collapse
|
35
|
Rose II, Roth H, Xie J, Hollmann F, Votteler S, Storr M, Krause B, Wessling M. Chemistry in a spinneret—Polydopamine functionalized hollow fiber membranes. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120324] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
36
|
Lin G, Bai Z, Liu C, Liu S, Han M, Huang Y, Liu X. Mechanically robust, nonflammable and surface cross-linking composite membranes with high wettability for dendrite-proof and high-safety lithium-ion batteries. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120262] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
37
|
Hu YQ, Li HN, Xu ZK. Janus hollow fiber membranes with functionalized outer surfaces for continuous demulsification and separation of oil-in-water emulsions. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120388] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2023]
|
38
|
Meng L, Mansouri J, Li X, Liang J, Huang M, Lv Y, Wang Z, Chen V. Omniphobic membrane via bioinspired silicification for the treatment of RO concentrate by membrane distillation. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120267] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
39
|
Chen W, Miao H, Meng G, Huang K, Kong L, Lin Z, Wang X, Li X, Li J, Liu XY, Lin N. Polydopamine-Induced Multilevel Engineering of Regenerated Silk Fibroin Fiber for Photothermal Conversion. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2107196. [PMID: 35060331 DOI: 10.1002/smll.202107196] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/21/2021] [Revised: 12/14/2021] [Indexed: 06/14/2023]
Abstract
Solid photothermal materials with favorable biocompatibility and modifiable mechanical properties demonstrate obvious superiority and growing demand. In this work, polydopamine (PDA) induced functionalization of regenerated silk fibroin (RSF) fibers has satisfactory photothermal conversion ability and flexibility. Based on multilevel engineering, RSF solution containing PDA nanoparticles is wet spun to PDA-incorporating RSF (PDA@RSF) fibers, and then the fibers are coated with PDA via oxidative self-polymerization of dopamine to form PDA@RSF-PDA (PRP) fibers. During the wet spinning process, PDA is to adjust the mechanical properties of RSF by affecting its hierarchical structure. Meanwhile, coated PDA gives the PRP fibers extensive absorption of near-infrared light and sunlight, which is further fabricated into PRP fibrous membranes. The temperature of PRP fibrous membranes can be adjusted and increases to about 50 °C within 360 s under 808 nm laser irradiation with a power density of 0.6 W cm-2 , and PRP fibrous membranes exhibit effective photothermal cytotoxicity both in vitro and in vivo. Under the simulated sunlight, the temperature of PRP fiber increases to more than 200 °C from room temperature and the material can generate 4.5 V voltage when assembled with a differential thermal battery, which means that the material also has the potential for flexible wearable electronic devices.
Collapse
Affiliation(s)
- Wei Chen
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Hao Miao
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Guoqing Meng
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Kailun Huang
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Lingqing Kong
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Zaifu Lin
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Xudong Wang
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Xiaobao Li
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Jinghan Li
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| | - Xiang-Yang Liu
- Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore, 117542, Republic of Singapore
| | - Naibo Lin
- College of Materials, Research Institution for Biomimetics and Soft Matter, Fujian Key Provincial Laboratory for Soft Functional Materials Research, Xiamen University, 422 Siming Nan Road, Xiamen, 361005, P. R. China
| |
Collapse
|
40
|
Han Q, Wang J, Li M, Wang X, Wang Q, Ye C, Yang C, Qiu T. A method to fabricate supported catalytic packing: Polydopamine as a "Double-Sided Adhesive" to prepare the fully covered seeding layer. J Taiwan Inst Chem Eng 2022. [DOI: 10.1016/j.jtice.2021.10.016] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
41
|
Feng X, Peng D, Zhu J, Wang Y, Zhang Y. Recent advances of loose nanofiltration membranes for dye/salt separation. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2021.120228] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
42
|
Shen Q, Lin Y, Ueda T, Zhang P, Jia Y, Istirokhatun T, Song Q, Guan K, Yoshioka T, Matsuyama H. The underlying mechanism insights into support polydopamine decoration toward ultrathin polyamide membranes for high-performance reverse osmosis. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120269] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
43
|
Augustine N, Putzke S, Janke A, Simon F, Drechsler A, Zimmerer CA. Dopamine-Supported Metallization of Polyolefins─A Contribution to Transfer to an Eco-friendly and Efficient Technological Process. ACS APPLIED MATERIALS & INTERFACES 2022; 14:5921-5931. [PMID: 35040627 DOI: 10.1021/acsami.1c19575] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Metallization is a common method to produce functional or decorative coatings on plastic surfaces. State-of-the-art technologies require energy-intensive process steps and the use of organic solvents or hazardous substances to achieve sufficient adhesion between the polymer and the metal layer. The present study introduces a facile bio-inspired "green" approach to improve this technology: the use of dopamine, a small-molecule mimic of the main structural component of adhesive mussel proteins, as an adhesion promoter. To understand dopamine adhesion and identify conditions for successful metallization, polyethylene surfaces were dip-coated with dopamine and metallized with nickel by electroless metallization; essential parameters such as temperature, pH value, concentration of dopamine and buffer, and the deposition time were systematically varied. Effects of adding oxidants to the dopamine bath, cross-linking, thermal and UV post-treatment of the polydopamine film, and plasma pretreatment of the substrate were investigated. The properties of the polydopamine layer and the quality of the metal film were studied by physico-chemical, optical, and mechanical techniques. It was shown that simple dip-coating of the substrate with dopamine under optimal conditions is sufficient to support metal layers with a good optical quality. Technologically relevant metal layer quality and adhesion were obtained with annealed and UV-treated polydopamine films and enhanced by plasma pretreatment of the substrate. The study shows that dopamine provides a new interfacial design for plastic metallization that can reduce energy consumption, use of hazardous substances, and reject rate during manufacturing. The results are essential findings for further technological developments of a universal platform to promote adhesion between plastics and metal or potentially also other material classes, enabling economic material development and more eco-friendly applications.
Collapse
Affiliation(s)
- Nithyarani Augustine
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, D-01069 Dresden, Germany
| | - Sascha Putzke
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, D-01069 Dresden, Germany
| | - Andreas Janke
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, D-01069 Dresden, Germany
| | - Frank Simon
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, D-01069 Dresden, Germany
| | - Astrid Drechsler
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, D-01069 Dresden, Germany
| | - Cordelia A Zimmerer
- Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Straße 6, D-01069 Dresden, Germany
| |
Collapse
|
44
|
Lei J, Liu X, Chen X, Luo H, Feng W, Zhang J, Liu F, Pei S, Zhang Y. Ultra-bubble-repellent sodium perfluorosulfonic acid membrane with a mussel-inspired intermediate layer for high-efficiency chlor-alkali electrolysis. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2021.120181] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
45
|
Martinez J, Aghajani M, Lu Y, Blevins AK, Fan S, Wang M, Killgore JP, Perez SB, Patel J, Carbrello C, Foley S, Sylvia R, Long R, Castro R, Ding Y. Capillary bonding of membranes by viscous polymers: Infiltration kinetics and mechanical integrity of the bonded polymer/membrane structures. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2021.119898] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
46
|
Azim N, Orrico JF, Appavoo D, Zhai L, Rajaraman S. Polydopamine surface functionalization of 3D printed resin material for enhanced polystyrene adhesion towards insulation layers for 3D microelectrode arrays (3D MEAs). RSC Adv 2022; 12:25605-25616. [PMID: 36320408 PMCID: PMC9493467 DOI: 10.1039/d2ra03911g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2022] [Accepted: 08/16/2022] [Indexed: 12/05/2022] Open
Abstract
3D printing involves the use of photopolymerizable resins, which are toxic and typically have incompatible properties with materials such as polystyrene (PS), which present limitations for biomedical applications. We present a method to dramatically improve the poor adhesion between the PS insulative layer on 3D printed Microelectrode Array (MEA) substrates by functionalizing the resin surface with polydopamine (PDA), a mussel-inspired surface chemistry derivative. A commercial 3D printing prepolymer resin, FormLabs Clear (FLC), was printed using a digital light processing (DLP) printer and then surface functionalized with PDA by alkali-induced aqueous immersion deposition and self-polymerization. It was observed that the adhesion of the PS to FLC was improved due to the precision emanating from the DLP method and further improved after the functionalization of DLP printed substrates with PDA at 1, 12, and 24 h time intervals. The adhesion of PS was evaluated through scotch tape peel testing and instron measurements of planar substrates and incubation testing with qualitative analysis of printed culture wells. The composition and topology of the samples were studied to understand how the properties of the surface change after PDA functionalization and how this contributes to the overall improvement in PS adhesion. Furthermore, the surface energies at each PDA deposition time were calculated from contact angle studies as it related to adhesion. Finally, biocompatibility assays of the newly modified surfaces were performed using mouse cardiac cells (HL-1) to demonstrate the biocompatibility of the PDA functionalization process. PDA surface functionalization of 3D DLP printed FLC resin resulted in a dramatic improvement of thin film PS adhesion and proved to be a biocompatible solution for improving additive manufacturing processes to realize biosensors such as in vitro MEAs. 3D printing involves the use of toxic photopolymerizable resins which typically have incompatible properties with polystyrene for biomedical applications. Herein, we use 3D printing tricks and polydopamine to dramatically improve adhesion.![]()
Collapse
Affiliation(s)
- Nilab Azim
- NanoScience Technology Center (NSTC), University of Central Florida, Orlando, FL, 32826, USA
- Department of Chemistry, University of Central Florida, Orlando, FL, 32826, USA
| | - Julia Freitas Orrico
- NanoScience Technology Center (NSTC), University of Central Florida, Orlando, FL, 32826, USA
| | - Divambal Appavoo
- NanoScience Technology Center (NSTC), University of Central Florida, Orlando, FL, 32826, USA
| | - Lei Zhai
- NanoScience Technology Center (NSTC), University of Central Florida, Orlando, FL, 32826, USA
- Department of Chemistry, University of Central Florida, Orlando, FL, 32826, USA
| | - Swaminathan Rajaraman
- NanoScience Technology Center (NSTC), University of Central Florida, Orlando, FL, 32826, USA
- Department of Materials Science & Engineering, University of Central Florida, Orlando, FL, 32826, USA
- Department of Electrical & Computer Engineering, University of Central Florida, Orlando, FL, 32826, USA
- Burnett School of Biomedical Sciences, University of Central Florida, Orlando, FL, 32826, USA
| |
Collapse
|
47
|
Wang Z, Gao J, Zhu L, Meng J, He F. Tannic acid-based functional coating: surface engineering of membranes for oil-in-water emulsion separation. Chem Commun (Camb) 2022; 58:12629-12641. [DOI: 10.1039/d2cc05102h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Recent progress in the tannic acid-based functional coating for surface engineering of membranes toward oil-in-water emulsion separation is summarized.
Collapse
Affiliation(s)
- Zhenxing Wang
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, P. R. China
| | - Jie Gao
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, P. R. China
| | - Lin Zhu
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, P. R. China
| | - Jinxuan Meng
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, P. R. China
| | - Fang He
- School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, P. R. China
| |
Collapse
|
48
|
Wang T, Zheng X, Wang Y, Zhang L, Zhao Z, Li J. Fabrication and Performance of Novel Poly(piperazine-amide) Composite Nanofiltration Membranes Based on Various Poly( m-phenylene isophthalamide) Substrates. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.1c04286] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Tao Wang
- School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 102488, P. R. China
| | - Xi Zheng
- School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 102488, P. R. China
| | - Yajun Wang
- School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 102488, P. R. China
| | - Luyao Zhang
- School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 102488, P. R. China
| | - Zhenzhen Zhao
- School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 102488, P. R. China
| | - Jiding Li
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, P. R. China
| |
Collapse
|
49
|
Modelling the kinetics of direct Cu(II) adsorption on two porous resins modified with mussel-inspired chemistry. JOURNAL OF POLYMER RESEARCH 2021. [DOI: 10.1007/s10965-021-02865-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
50
|
Designment of polydopamine/bacterial cellulose incorporating copper (II) sulfate as an antibacterial wound dressing. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2021; 134:112591. [DOI: 10.1016/j.msec.2021.112591] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/15/2021] [Revised: 11/02/2021] [Accepted: 11/30/2021] [Indexed: 11/20/2022]
|