Understanding water and ion transport behaviour and permeability through poly(amide) thin film composite membrane

The physical basis for solvent flow in organic solvent nanofiltration

Organic solvent nanofiltration (OSN) is an emerging membrane technology that could revolutionize chemical separations in numerous vital industries. Despite its significance, there remains a lack of fundamental understanding of solvent transport mechanisms in OSN membranes. Here, we use an extended Flory-Rehner theory, nonequilibrium molecular dynamic simulations, and organic solvent transport experiments to demonstrate that solvent flow in OSN membranes is driven by a pressure gradient. We show that solvent molecules migrate as clusters through interconnected pathways within the membrane pore structure, challenging the widely accepted diffusion-based view of solvent transport in OSN. We further reveal that solvent permeance is dependent on solvent affinity to the OSN membrane, which, in turn, controls the membrane pore structure. Our fundamental insights lay the scientific groundwork for the development of next-generation OSN membranes.

Trade-off between Endocrine-Disrupting Compound Removal and Water Permeance of the Polyamide Nanofiltration Membrane: Phenomenon and Molecular Insights

The polyamide (PA) nanofiltration (NF) membrane has the potential to remove endocrine-disrupting compounds (EDCs) from water and wastewater to prevent risks to both the aquatic ecosystem and human health. However, our understanding of the EDC removal-water permeance trade-off by the PA NF membrane is still limited, although the salt selectivity-water permeance trade-off has been well illustrated. This constrains the precise design of a high-performance membrane for removing EDCs. In this study, we manipulated the PA nanostructures of NF membranes by altering piperazine (PIP) monomer concentrations during the interfacial polymerization (IP) process. The upper bound coefficient for EDC selectivity-water permeance was demonstrated to be more than two magnitudes lower than that for salt selectivity-water permeance. Such variations were derived from the different membrane-solute interactions, in which the water/EDC selectivity was determined by the combined effects of steric exclusion and the hydrophobic interaction, while the electrostatic interaction and steric exclusion played crucial roles in water/salt selectivity. We further highlighted the role of the pore number and residual groups during the transport of EDC molecules across the PA membrane via molecular dynamics (MD) simulations. Fewer pores decreased the transport channels, and the existence of residual groups might cause steric hindrance and dynamic disturbance to EDC transport inside the membrane. This study elucidated the trade-off phenomenon and mechanisms between EDC selectivity and water permeance, providing a theoretical reference for the precise design of PA NF membranes for effective removal of EDCs in water reuse.

Optimizing electroactive membrane performance for microalgae harvesting: A response surface methodology study of membrane formulation and operating parameters for electro filtration

Developing electroactive membranes for filtration has gained importance owing to their effectiveness in mitigating the long-lasting issue of fouling faced with traditional membranes. Here, we developed thin electroactive metallic films on to stainless steel mesh (SSM) using electrodeposition method and evaluated their performance for microalgae harvesting via electro filtration. The effect of electrodeposition parameters on membrane formulation and operating parameters for electro filtration, both in continuous and intermittent modes, were evaluated and optimum values were obtained using response surface methodology (RSM). The optimal combination of electrodeposition parameters is 1000 μA/cm2 and 5 min for deposition current density and time, respectively. Whereas the electric field strength of 20 V/mm with an application time of 1 min is suggested to be the optimal combination of electro filtration parameters for maximized flux recovery and corresponding experimental rejection efficiency of more than 90%. Overall, this research contributes to a better understanding of the parameters governing electro-filtration and offers insights for improving the performance of membrane-based microalgae harvesting systems.

Integrating Navajo Pottery Techniques To Improve Silver Nanoparticle-Enabled Ceramic Water Filters for Disinfection

Point-of-use treatment technologies can increase access to safe drinking water in rural areas. Sustained use of these technologies is uncommon due to oversight of community needs, user-perceived risks, long-term maintenance, and conflict with traditional practices. Nanosilver-enabled ceramic water filters are unique due to the use of locally sourced materials available at or near the target community; however, technical limitations persist (e.g., nanosilver's uncontrolled release and passivation from sulfide or chloride). This work aims to overcome these limitations by impregnating nanosilver onto ceramics with a Navajo pottery rosin, collected from pinyon trees with a third-generation artisan. Here, we investigate this sustainable and novel material for drinking water treatment; the study ranges from a proof of concept to testing under realistic conditions. Results show that when embedded in a thin film, the biopolymer controlled ionic silver dissolution and prevented silver passivation from sulfide and chloride. When applied to ceramic filters, the biopolymer effectively immobilized nanosilver in a range of waters. Over a 25 day study to emulate household-use conditions, this coating method sustained disinfection of a coculture of Gram-positive and Gram-negative bacteria while controlling biofouling. Overall, the use of this Navajo pottery material can facilitate adoption while providing the needed technological advancement to these widely used treatment devices.

Thermodynamic characteristics of the aliphatic polyamide crystal structures: Enhancement of nylon 66α, 610α and 77γ polymers

Despite the polymer industry's reliance on nylon polymers, numerous questions remain about their crystal structures, modeling, and other features. This work discusses the thermodynamic properties and molecular modeling of a polyamides nylon 66α, 610α, and 77γ crystal structure systems for use in various electronics and Nano-devices that feature distinct properties such as exceptional optoelectronic properties at a low cost compared to other structures. This study looked at the crystal structure of a linear polyamide chain made up of repeating units. The influence of the thermal expansion coefficient and thermodynamic parameters on crystal structures' characteristics at different temperatures has previously been explored. The findings of this study demonstrate, on the one hand, the influence of the amorphous phase on the final thermodynamic characteristics of semi-crystalline polymers and, on the other hand, pave the way for greater improvement in the durability of these polymers by increasing their crystalline features. The values of the thermodynamic parameters for nylon 66α, 610α and 77γ such as enthalpy (ΔHExp.) were 35.08, 40.25, and 1.44 kJ/mol, entropy (ΔSExp.) 113.75, 128.84, and 15.10 J/mol-K, free energy (ΔGExp.) was -44.57, -46.62, and -6.86 kJ/mol, respectively. When the nylon data is compared, the nylon 610α exhibits a significantly higher free energy, at high temperatures, the process is spontaneous and exergonic, making it a potentially viable material for use as fibers and engineering thermoplastics.

Quantitatively Unveiling the Structure-Activity Relationship of Polyamide Nanofiltration Membranes with Complex Structures

Nanofiltration polyamide (NF PA) membranes are widely used in seawater desalination and wastewater treatment due to their excellent permeability. The structure-activity relationship of PA membranes has attracted extensive attention in decades. In this work, NF PA membranes with planar structure, nodular structure, and peak-valley structure were constructed, and the pure water permeance was calculated by nonequilibrium molecular dynamics simulation to quantitatively investigate the structure-activity relationship between the microstructure and water permeance. Results showed that the peak-valley structure had the highest effective utilization rate of the membrane surface, which had the highest number of water molecules that passed through membranes per unit cross-sectional area (7.09). Furthermore, with the increase of the specific surface area ratio, the water permeance of the NF PA with peak-valley increased at a rate about 2.5 times than that of the planar NF PA. Therefore, some molecular scale insights were supplied about the structure-activity relationship of NF PA membranes, which is helpful for the fabrication of high-performance NF PA membranes.

Semiaromatic Polyamide-Based Membrane in Forward Osmosis: Molecular Insights

Despite the increased interest in forward osmosis (FO) in recent years, the technology's advancement in commercial and industrial applications has been hampered by the absence of suitable FO membranes and ideal draw solutes, which demands the exploration of new membranes and novel draw solutes targeted for some specific applications. In this context, we considered a semiaromatic polyamide (SAPA) for an application where monovalent salt can be permeated but has high selectivity toward divalent salt and excellent water permeability. In this regard, we constructed an atomistic model for the membrane via a heuristic approach using an equilibrated mixture of hydrolyzed trimesoyl chloride and piperazine monomers and performed nonequilibrium molecular dynamics simulations on the SAPA membrane in the FO process to understand the structural properties and performance of the membrane at the atomistic level. We used pure water as the feed and Na₂SO₄ as the draw solution. It is observed that the SAPA membrane shows excellent water permeability and no reverse draw solute flux. To further test the dynamics of salt ions inside the membranes, we performed two distinct equilibrium simulations on systems consisting of either monovalent salt, such as NaCl, or divalent salt, such as Na₂SO₄. The atomistic details of the interactions between the functional groups of the membrane and salt ions provided in this work can inspire further experiments on SAPA membranes in the context of separation of monovalent and divalent salts, which have applications in the treatment of textile industry wastewater.

Water transport in reverse osmosis membranes is governed by pore flow, not a solution-diffusion mechanism

We performed nonequilibrium molecular dynamics (NEMD) simulations and solvent permeation experiments to unravel the mechanism of water transport in reverse osmosis (RO) membranes. The NEMD simulations reveal that water transport is driven by a pressure gradient within the membranes, not by a water concentration gradient, in marked contrast to the classic solution-diffusion model. We further show that water molecules travel as clusters through a network of pores that are transiently connected. Permeation experiments with water and organic solvents using polyamide and cellulose triacetate RO membranes showed that solvent permeance depends on the membrane pore size, kinetic diameter of solvent molecules, and solvent viscosity. This observation is not consistent with the solution-diffusion model, where permeance depends on the solvent solubility. Motivated by these observations, we demonstrate that the solution-friction model, in which transport is driven by a pressure gradient, can describe water and solvent transport in RO membranes.

Fouling in reverse osmosis membranes: monitoring, characterization, mitigation strategies and future directions

Water scarcity has been a global challenge for many countries over the past decades, and as a result, reverse osmosis (RO) has emerged as a promising and cost-effective tool for water desalination and wastewater remediation. Currently, RO accounts for >65% of the worldwide desalination capacity; however, membrane fouling is a major issue in RO processes. Fouling reduces the membrane's lifespan and permeability, while also increases the operating pressure and chemical cleaning frequency. Overall, fouling reduces the quality and quantity of desalinated water, and thus hinders the sustainable application of RO membranes by disturbing its efficacy and economic aspects. Fouling arises from various physicochemical interactions between water pollutants and membrane materials leading to foulants' accumulation onto the membrane surfaces and/or inside the membrane pores. The current review illustrates the main types of particulates, organic, inorganic and biological foulants, along with the major factors affecting its formation and development. Moreover, the currently used monitoring methods, characterization techniques and the potential mitigation strategies of membrane fouling are reviewed. Further, the still-faced challenges and the future research on RO membrane fouling are addressed.

Unlocking the potential of polymeric desalination membranes by understanding molecular-level interactions and transport mechanisms

Polyamide reverse osmosis (PA-RO) membranes achieve remarkably high water permeability and salt rejection, making them a key technology for addressing water shortages through processes including seawater desalination and wastewater reuse. However, current state-of-the-art membranes suffer from challenges related to inadequate selectivity, fouling, and a poor ability of existing models to predict performance. In this Perspective, we assert that a molecular understanding of the mechanisms that govern selectivity and transport of PA-RO and other polymer membranes is crucial to both guide future membrane development efforts and improve the predictive capability of transport models. We summarize the current understanding of ion, water, and polymer interactions in PA-RO membranes, drawing insights from nanofiltration and ion exchange membranes. Building on this knowledge, we explore how these interactions impact the transport properties of membranes, highlighting assumptions of transport models that warrant further investigation to improve predictive capabilities and elucidate underlying transport mechanisms. We then underscore recent advances in in situ characterization techniques that allow for direct measurements of previously difficult-to-obtain information on hydrated polymer membrane properties, hydrated ion properties, and ion-water-membrane interactions as well as powerful computational and electrochemical methods that facilitate systematic studies of transport phenomena.

Molecular Simulations to Elucidate Transport Phenomena in Polymeric Membranes

Despite decades of dominance in separation technology, progress in the design and development of high-performance polymer-based membranes has been incremental. Recent advances in materials science and chemical synthesis provide opportunities for molecular-level design of next-generation membrane materials. Such designs necessitate a fundamental understanding of transport and separation mechanisms at the molecular scale. Molecular simulations are important tools that could lead to the development of fundamental structure-property-performance relationships for advancing membrane design. In this Perspective, we assess the application and capability of molecular simulations to understand the mechanisms of ion and water transport across polymeric membranes. Additionally, we discuss the reliability of molecular models in mimicking the structure and chemistry of nanochannels and transport pathways in polymeric membranes. We conclude by providing research directions for resolving key knowledge gaps related to transport phenomena in polymeric membranes and for the construction of structure-property-performance relationships for the design of next-generation membranes.

Molecular Methods for Assessing the Morphology, Topology, and Performance of Polyamide Membranes

The molecular-scale morphology and topology of polyamide composite membranes determine the performance characteristics of these materials. However, molecular-scale simulations are computationally expensive and morphological and topological characterization of molecular structures are not well developed. Molecular dynamics simulation and analysis methods for the polymerization, hydration, and quantification of polyamide membrane structures were developed and compared to elucidate efficient approaches for producing and analyzing the polyamide structure. Polymerization simulations that omitted the reaction-phase solvent did not change the observed hydration, pore-size distribution, or water permeability, while improving the simulation efficiency. Pre-insertion of water into the aggregate pores (radius ≈ 4 Å) of dry domains enabled shorter hydration simulations and improved simulation scaling, without altering pore structure, properties, or performance. Medial axis and Minkowski functional methods were implemented to identify permeation pathways and quantify the polyamide morphology and topology, respectively. Better agreement between simulations and experimentally observed systems was accomplished by increasing the domain size rather than increasing the number of ensemble realizations of smaller systems. The largest domain hydrated was an order of magnitude larger by volume than the largest domain previously reported. This work identifies methods that can enable more efficient and meaningful fundamental modeling of membrane materials.

Water Transport and Ion Diffusion Investigation of an Amphotericin B-Based Channel Applied to Forward Osmosis: A Simulation Study

The use of an Amphotericin B_Ergosterol (AmBEr) channel as an artificial water channel in forward osmosis filtration (FO) was studied via molecular dynamics (MD) simulation. Three channel models were constructed: a common AmBEr channel and two modified C3deOAmB_Ergosterol (C3deOAmBEr) channels with different diameters (12 Å and 18 Å). During FO filtration simulation, the osmotic pressure of salt-water was a driving force for water permeation. We examined the effect of the modified C3deOAmBEr channel on the water transport performance. By tracing the change of the number of water molecules along with simulation time in the saltwater region, the water permeability of the channel models could be calculated. A higher water permeability was observed for a modified C3deOAmBEr channel, and there was no ion permeation during the entire simulation period. The hydrated ions and water molecules were placed into the channel to explore the ion leakage behavior of the channels. The mean squared displacement (MSD) of ions and water molecules was obtained to study the ion leakage performance. The Amphotericin B-based channels showed excellent selectivity of water molecules against ions. The results obtained on an atomistic scale could assist in determining the properties and the optimal filtration applications for Amphotericin B-based channels.

Unveiling the Molecular Mechanisms of Thickness-Dependent Water Dynamics in an Ultrathin Free-Standing Polyamide Membrane

Aromatic polyamide (PA) membranes fabricated from interfacial polymerization are widely used for desalination and water treatment. The fabrication of the high-flux PA membrane requires a fundamental understanding of the molecular mechanisms of water dynamics in the PA, which is still obscure due to the limited experimental methods. Herein, molecular dynamics (MD) simulations were employed to establish an atomic model of ultrathin free-standing PA membranes with various thickness and to explore the thickness-dependent dynamics of water molecules in the PA membrane. Simulation results illustrate that the simulated PA membrane has an average pore radius of 3 Å similar to the free volume size of the experimental PA membrane measured by PALS. The PA could be identified as the swelling layer (SL) and the confined layer (CL) based on their water diffusion rates. The diffusivity of water in the confined layer of PA membrane was much lower than that in the swelling layer and thus determined the water flux of the PA membrane. The water diffusivity in the sub-8 nm PA membrane is greatly enhanced due to a very thin confined layer thickness, illustrating the mechanism of the experimentally fabricated sub-8 nm PA membrane having the dramatically enhanced water permeability. Furthermore, results show that water molecules tend to transport rapidly in the free space inside the PA membrane. Our results provide some insights into the thickness-dependent water dynamics in the PA on a molecular level and may help to design the next generation of high-flux PA membranes.

Atomistic Simulations of Biofouling and Molecular Transfer of a Cross-linked Aromatic Polyamide Membrane for Desalination

Reverse osmosis through a polyamide (PA) membrane is an important technique for water desalination and purification. In this study, molecular dynamics simulations were performed to study the biofouling mechanism (i.e., protein adsorption) and nonequilibrium steady-state water transfer of a cross-linked PA membrane. Our results demonstrated that the PA membrane surface's roughness is a key factor of surface's biofouling, as the lysozyme protein adsorbed on the surface's cavity site displays extremely low surface diffusivity, blocking water passage, and decreasing water flux. The adsorbed protein undergoes secondary structural changes, particularly in the pressure-driven flowing conditions, leading to strong protein-surface interactions. Our simulations were able to present water permeation close to the experimental conditions with a pressure difference as low as 5 MPa, while all the electrolytes, which are tightly surrounded by hydration water, were effectively rejected at the membrane surfaces. The analysis of the self-intermediate scattering function demonstrates that the dynamics of water molecules coordinated with hydrogen bonds is faster inside the pores than during the translation across the pores. The pressure difference applied shows a negligible effect on the water structure and content inside the membrane but facilitates the transportation of hydrogen-bonded water molecules through the membrane's sub-nanopores with a reduced coordination number. The linear relationship between the water flux and the pressure difference demonstrates the applicability of continuum hydrodynamic principles and thus the stability of the membrane structure.

Crystallization of CaCO3 in Aqueous Solutions with Extremely High Concentrations of NaCl

The effect of NaCl at extremely high concentrations from 3.5 to 14 wt. % on the crystallization of CaCO3 was investigated in depth. The static test experiment verified that the Ca2+ retention efficiency (η) of NaCl on CaCO3 scale increased from 31.06% (3.5 wt. %) to 41.56% (14 wt. %). Based on the calculation of supersaturation rations, the high concentration of NaCl could reduce the activity coefficients of [Ca2+] and [CO32−], thus reducing the actual concentration of CaCO3. The CaCO3 deposition rate constants (k) showed that NaCl slowed down the rate of CaCO3 crystallization. The X–ray diffraction (XRD) testing disclosed that the growth of (1 0 4) and (1 1 0) faces from calcite was impeded, while the formation of (1 1 1) face from aragonite was induced by the increasing concentration of NaCl. The inductively coupled plasma optical emission spectrometry (ICP–OES) results indicated that Na+ could be doped into CaCO3, leading to the one–dimensional crystal growth. It was further proved that NaCl heightens the efficiency of the typical phosphate inhibitors (2–phosphonobutane–1,2,4–tricarboxylic acid (PBTCA) and 1–hydroxyethane–1,1–diphosphonic acid (HEDP)) on prohibiting the scale of CaCO3.

Ultrahigh Permeable C2N-Inspired Graphene Nanomesh Membranes versus Highly Strained C2N for Reverse Osmosis Desalination

The reverse osmosis (RO) desalination capability of hydrogenated and hydroxylated graphene nanomesh membranes (GNMs) inspired by the morphology of carbon nitride (C₂N) has been studied by using molecular dynamics simulation. As an advantage, water permeance of the GNMs is found to be several orders of magnitude higher than that of the available RO filters and comparable with highly strained C₂N (S-C₂N) as follows: 6,6-H,OH > 12-H > S-C₂N > 5,5-H,OH > 10-H. The reverse order is found for salt rejection, regardless of S-C₂N. The hydrophilic character of the incorporated -OH functional group is believed to be responsible for linking the water molecules in feed and permeate sides via the formation of strong hydrogen bonds. This leads to a remarkable reduction in resistance of water molecules during penetration across GNMs. In fact, water permeance and salt rejection of the GNMs are controllable by adjusting the effective size and chemistry of their nanopores, while these kinds of adjustments are principally impossible for C₂N, resulting in limiting the water permeance. More importantly, the C₂N nanofilter works efficiently only under high tensile strain, which is not so straightforward in practice. These observations are also verified by computing electrostatic potential map interaction and barrier energies for transportation of water molecules/ions through GNMs based on quantum chemistry aspects.

Characterizing salt permeability in polyamide desalination membranes using electrochemical impedance spectroscopy

Improving the performance of desalination membranes requires better measurements of salt permeability in the polyamide separating layer to elucidate the thermodynamic and kinetic components of membrane permselectivity. In this work, electrochemical impedance spectroscopy (EIS) is introduced as a technique to measure the salt permeability and estimate the salt partition coefficient in thin polyamide films created using molecular layer-by-layer deposition. The impedance of supported polyamide films ranging in thickness from 3.5 nm to 28.5 nm were measured in different electrolyte solutions. Impedance spectra were modeled with equivalent circuits containing resistive and capacitive elements associated with the EIS measurement system as well as characteristic low-frequency parallel resistive and capacitive elements that are associated with the polyamide film. The characteristic polyamide membrane resistance increases with film thickness, decreases with solution concentration, and is an order of magnitude greater for a divalent cationic solution than for a monovalent cationic solution. For each polyamide film, salt permeability is calculated from the membrane resistance, and a salt partition coefficient is estimated. At the highest solution concentration measured, which is representative of brackish water desalination conditions, the calculated salt permeabilities range from P _s = 1.3 × 10^-16 m s^-1 to 3.9 × 10^-16 m s^-1, and the estimated salt partition coefficients range from K _s = 0.008 to 0.016. These measurements demonstrate that EIS is a powerful tool for studying membrane permselectivity through the measurement of salt permeability in thin polyamide films.

Molecular Insights into the Composition-Structure-Property Relationships of Polyamide Thin Films for Reverse Osmosis Desalination

A molecular-level understanding of the structure-property relationship of polyamide (PA) active layers in thin-film-composite membranes remains unclear. We developed an approach to build and hydrate the PA layer in molecular dynamics simulations and reproduced realistic membrane properties, which enabled us to examine the composition-structure-permeability relationships at the molecular level. We discovered the variation of pore size distributions in the dry PA structures at different monomer compositions, leading to different water cluster distributions and wetting properties of hydrated PA films. Membrane swelling was linearly dependent on the degree of cross-linking (DC), and higher water flux was obtained in the more swelling-prone PA films because of the transition in water transport mechanisms. Continuum-like and jumping transport both occurred in PA films with smaller DC, where visible and more persistent channels existed. In the denser films, water molecules relied only on the on-and-off channels to jump from one cavity to another; however, jumping transport was more pronounced even in the less dense PA films, and all the PA structures exhibited oscillations, which provided evidence for the solution-diffusion model rather than the pore-flow model. The results not only contribute to fundamental understanding but also provide insights into the molecule-level design for next-generation membranes.

Investigation of reverse ionic diffusion in forward-osmosis-aided dewatering of microalgae: A molecular dynamics study

This study aimed to investigate the transport mechanisms of ions during forward-osmosis-driven (FO-driven) dewatering of microalgae using molecular dynamics (MD) simulations. The dynamical and structural properties of ions in FO systems of varying NaCl or MgCl₂ draw solution (DS) concentrations were calculated and correlated. Results indicate that FO systems with higher DS concentration caused ions to have lower hydration numbers and higher coordination numbers leading to lower diffusion coefficients. The higher hydration number of Mg²⁺ ions resulted in significantly lower ionic permeability as compared to Na⁺ ions at all concentrations (p = 0.002). The simulations also revealed that higher DS concentrations led to higher accumulation of ions in the membrane. This study provides insights on the proper selection of DS for FO systems.

Anomalous Dynamics of Water in Polyamide Matrix

Water in polymer matrixes is likely to show anomalous dynamics, a problem that has not been well understood yet. Here, we performed atomistic molecular dynamics simulations to study the water dynamics in a polyamide (PA) matrix, the bulk phase of well-known reverse osmosis membranes. For time-dependent ensemble average, water molecules experienced ballistic diffusion at a shorter time scale, followed by a crossover from subdiffusion to Brownian diffusion at a time scale ∼10 ns, and non-Gaussian diffusion, an indication of anomalous dynamics, sticks on even in the Brownian diffusion region. The anomalous dynamics mainly originates from two distinct motions including small-step continuous diffusion and jumping diffusion. The jumping motion has a mean length of 3.08 ± 0.31 Å and characteristic relaxation time of 0.218 ± 0.040 ns, which dominates the water diffusion in a fully hydrated PA matrix. It comprised low- and high-frequency jumps; the former is almost unchanged, and the latter remarkably increases with the increase of the hydration level. Surrounding neighbors of water strongly affect the jumping frequency, which exponentially or linearly decays with the increase in the number of atoms from the PA matrix. Although the PA matrix is flexible, associated with the water dynamics, the translocation of water is mainly through either tracing the position of neighboring water or jumping into the adjacent accommodation space.

How Pore Hydrophilicity Influences Water Permeability?

Membrane separation is playing increasingly important role in providing clean water. Simulations predict that membrane pores with strong hydrophobicity produce ultrahigh water permeability as a result of low friction. However, experiments demonstrate that hydrophilic pores favor higher permeability. Herein we simulate water molecules transporting through interlayers of two-dimensional nanosheets with various hydrophilicities using nonequilibrium molecular dynamics. We reveal that there is a threshold pressure drop (ΔP _T), exceeding which stable water permeability appears. Strongly hydrophobic pores exhibit extremely high ΔP _T, prohibiting the achievement of ultrahigh water permeability under the experimentally accessible pressures. Under pressures < ΔP _T, water flows in hydrophobic pores in a running-stop mode because of alternative wetting and nonwetting, thus leading to significantly reduced permeability. We discover that hydrophilic modification to one surface of the nanosheet can remarkably reduce ΔP _T by > 99%, indicating a promising strategy to experimentally realize ultrafast membranes.

Molecular dynamics simulation studies of the structure and antifouling performance of a gradient polyamide membrane

The structure and the antifouling performance of the first gradient polyamide layer model are systematically disclosed using molecular dynamics simulations.

Understanding the temperature effect on transport dynamics and structures in polyamide reverse osmosis system via molecular dynamics simulations

Molecular simulations could disclose the transport dynamics, membrane structures and temperature effect on reverse osmosis process.

Development of Nanostructured Water Treatment Membranes Based on Thermotropic Liquid Crystals: Molecular Design of Sub-Nanoporous Materials

Supply of safe fresh water is currently one of the most important global issues. Membranes technologies are essential to treat water efficiently with low costs and energy consumption. Here, the development of self-organized nanostructured water treatment membranes based on ionic liquid crystals composed of ammonium, imidazolium, and pyridinium moieties is reported. Membranes with preserved 1D or 3D self-organized sub-nanopores are obtained by photopolymerization of ionic columnar or bicontinuous cubic liquid crystals. These membranes show salt rejection ability, ion selectivity, and excellent water permeability. The relationships between the structures and the transport properties of water molecules and ionic solutes in the sub-nanopores in the membranes are examined by molecular dynamics simulations. The results suggest that the volume of vacant space in the nanochannel greatly affects the water and ion permeability.

A review of reverse osmosis membrane fouling and control strategies

Reverse osmosis (RO) membrane technology is one of the most important technologies for water treatment. However, membrane fouling is an inevitable issue. Membrane fouling leads to higher operating pressure, flux decline, frequent chemical cleaning and shorter membrane life. This paper reviews membrane fouling types and fouling control strategies, with a focus on the latest developments. The fundamentals of fouling are discussed in detail, including biofouling, organic fouling, inorganic scaling and colloidal fouling. Furthermore, fouling mitigation technologies are also discussed comprehensively. Pretreatment is widely used in practice to reduce the burden for the following RO operation while real time monitoring of RO has the advantage and potential of providing support for effective and efficient cleaning. Surface modification could slow down membrane fouling by changing surface properties such as surface smoothness and hydrophilicity, while novel membrane materials and synthesis processes build a promising future for the next generation of RO membranes with big advancements in fouling resistance. Especially in this review paper, statistical analysis is conducted where appropriate to reveal the research interests in RO fouling and control.

Porous organic cage membranes for water desalination: a simulation exploration

A proof-of-concept simulation study is reported for water desalination through porous organic cage membranes.

Ultrathin Molecular-Layer-by-Layer Polyamide Membranes: Insights from Atomistic Molecular Simulations

In this study, we present an atomistic simulation study of several physicochemical properties of polyamide (PA) membranes formed from interfacial polymerization or from a molecular-layer-by-layer (mLbL) on a silicon wafer. These membranes are composed of meta-phenylenediamine (MPD) and benzene-1,3,5-tricarboxylic acid chloride (TMC) for potential reverse osmosis (RO) applications. The mLbL membrane generation procedure and the force field models were validated, by comparison with available experimental data, for hydrated density, membrane swelling, and pore size distributions of PA membranes formed by interfacial polymerization. Physicochemical properties such as density, free volume, thickness, the degree of cross-linking, atomic compositions, and average molecular orientation (which is relevant for the mLbL membranes) are compared for these different processes. The mLbL membranes are investigated systematically with respect to TMC monomer growth rate per substrate surface area, MPD/TMC ratio, and the number of mLbL deposition cycles. Atomistic simulations show that the mLbL deposition generates membranes with a constant film growth if both the TMC monomer growth rate and MPD/TMC monomer ratio are kept constant. The film growth rate increases with TMC monomer growth rate or MPD/TMC ratio. Furthermore, it was found on one hand that the mLbL membrane density and free volume varies significantly with respect to the TMC monomer growth rate, while on the other hand the degree of cross-linking and the atomic composition varies considerably with the MPD/TMC ratio. Additionally, it was found that both TMC and MPD orient at a tilted angle with respect to the substrate surface, where their angular distribution and average angle orientation depend on both the TMC growth rate and the number of deposition cycles. This study illustrates that molecular simulations can play a crucial role in the understanding of structural properties that can empower the design of the next generation RO membranes created from molecular-layer-by-layer (mLbL) on a silicon wafer.

A probabilistic approach for estimating water permeability in pressure-driven membranes

A probabilistic approach is proposed to estimate water permeability in a cellulose triacetate (CTA) membrane. Water transport across the membrane is simulated in reverse osmosis mode by means of non-equilibrium molecular dynamics (MD) simulations. Different membrane configurations obtained by an annealing MD simulation are considered and simulation results are analyzed by using a hierarchical Bayesian model to obtain the permeability of the different membranes. The estimated membrane permeability is used to predict full-scale water flux by means of a process-level Monte Carlo simulation. Based on the results, the parameters of the model are observed to converge within 5-ns total simulation time. The results also indicate that the use of unique structural configurations in MD simulations is essential to capture realistic membrane properties at the molecular scale. Furthermore, the predicted full-scale water flux based on the estimated permeability is within the same order of magnitude of bench-scale experimental measurement of 1.72×10(-5) m/s.

Towards Enhanced Performance Thin-film Composite Membranes via Surface Plasma Modification

Advancing the design of thin-film composite membrane surfaces is one of the most promising pathways to deal with treating varying water qualities and increase their long-term stability and permeability. Although plasma technologies have been explored for surface modification of bulk micro and ultrafiltration membrane materials, the modification of thin film composite membranes is yet to be systematically investigated. Here, the performance of commercial thin-film composite desalination membranes has been significantly enhanced by rapid and facile, low pressure, argon plasma activation. Pressure driven water desalination tests showed that at low power density, flux was improved by 22% without compromising salt rejection. Various plasma durations and excitation powers have been systematically evaluated to assess the impact of plasma glow reactions on the physico-chemical properties of these materials associated with permeability. With increasing power density, plasma treatment enhanced the hydrophilicity of the surfaces, where water contact angles decreasing by 70% were strongly correlated with increased negative charge and smooth uniform surface morphology. These results highlight a versatile chemical modification technique for post-treatment of commercial membrane products that provides uniform morphology and chemically altered surface properties.

Topology and porosity modulation of polyurea films using interfacial polymerization

Polyurea films with controllable topologies and porosities were obtained by reacting different amines with hexamethyl diisocyanate at the liquid–liquid interface.

A critical review on recent polymeric and nano-enhanced membranes for reverse osmosis

Current and recent advances in polymeric and nano-enhanced membrane developments for reverse osmosis are reported in terms of membrane performance and fouling.