Polybenzimidazole-based polymeric ionic liquids (PILs): Effects of ‘substitution asymmetry’ on CO 2 permeation properties

Key Applications and Potential Limitations of Ionic Liquid Membranes in the Gas Separation Process of CO2, CH4, N2, H2 or Mixtures of These Gases from Various Gas Streams

Heightened levels of carbon dioxide (CO₂) and other greenhouse gases (GHGs) have prompted research into techniques for their capture and separation, including membrane separation, chemical looping, and cryogenic distillation. Ionic liquids, due to their negligible vapour pressure, thermal stability, and broad electrochemical stability have expanded their application in gas separations. This work provides an overview of the recent developments and applications of ionic liquid membranes (ILMs) for gas separation by focusing on the separation of carbon dioxide (CO₂), methane (CH₄), nitrogen (N₂), hydrogen (H₂)_, or mixtures of these gases from various gas streams. The three general types of ILMs, such as supported ionic liquid membranes (SILMs), ionic liquid polymeric membranes (ILPMs), and ionic liquid mixed-matrix membranes (ILMMMs) for the separation of various mixed gas systems, are discussed in detail. Furthermore, issues, challenges, computational studies and future perspectives for ILMs are also considered. The results of the analysis show that SILMs, ILPMs, and the ILMMs are very promising membranes that have great potential in gas separation processes. They offer a wide range of permeabilities and selectivities for CO₂, CH₄, N₂, H₂ or mixtures of these gases. In addition, a comparison was made based on the selectivity and permeability of SILMs, ILPMs, and ILMMMs for CO₂/CH₄ separation based on a Robeson’s upper bound curves.

Poly(ionic liquid) composites

This review highlights recent advances in the development of poly(ionic liquid)-based composites for diverse materials applications.

Towards Biohydrogen Separation Using Poly(Ionic Liquid)/Ionic Liquid Composite Membranes

Considering the high potential of hydrogen (H₂) as a clean energy carrier, the implementation of high performance and cost-effective biohydrogen (bioH₂) purification techniques is of vital importance, particularly in fuel cell applications. As membrane technology is a potentially energy-saving solution to obtain high-quality biohydrogen, the most promising poly(ionic liquid) (PIL)–ionic liquid (IL) composite membranes that had previously been studied by our group for CO₂/N₂ separation, containing pyrrolidinium-based PILs with fluorinated or cyano-functionalized anions, were chosen as the starting point to explore the potential of PIL–IL membranes for CO₂/H₂ separation. The CO₂ and H₂ permeation properties at the typical conditions of biohydrogen production (T = 308 K and 100 kPa of feed pressure) were measured and discussed. PIL–IL composites prepared with the [C(CN)₃]⁻ anion showed higher CO₂/H₂ selectivity than those containing the [NTf₂]⁻ anion. All the membranes revealed CO₂/H₂ separation performances above the upper bound for this specific separation, highlighting the composite incorporating 60 wt % of [C₂mim][C(CN)₃] IL.

New Pyridinium Type Poly(Ionic Liquids) as Membranes for CO₂ Separation

New pyridinium based PILs have been prepared by modification of their precursors based on high molecular weight aromatic polyethers bearing main chain pyridine units. The proposed methodology involves the conversion of the precursors to their ionic analogues via N-methylation reaction, followed by anion exchange methathesis reaction to result in PILs with the desirable anions (tetrafluoroborate and bis(trifluoromethylsulfonyl)imide). These PILs show excellent thermal stability, excellent mechanical properties, and most importantly can form very thin, free standing films with minimum thickness of 3 μm. As expected, the PIL containing the TFSI⁻ anion showed improved CO₂ and CH₄ permeabilities compared to its analogue containing the BF₄⁻. PIL-IL composites membranes have also been prepared using the same PIL and different percentages of pyridinium based IL where it was shown that the membrane with the highest IL weight percentage (45 wt %) showed the highest CO₂ permeability (11.8 Barrer) and a high CO₂/CH₄ ideal selectivity of 35 at room temperature.

Ionic liquid-based materials: a platform to design engineered CO2 separation membranes

This review provides a judicious assessment of the CO₂ separation efficiency of membranes using ionic liquid-based materials and highlights breakthroughs and key challenges in this field.