A fast and reliable approach to benchmark low pressure hollow fibre filtration membranes for water purification

How and why does time matter - A comparison of fouling caused by organic substances on membranes over adsorption durations

This study investigated the effect of time on the severity of adsorptive fouling on polyvinylidene fluoride (PVDF) membrane surface. Sodium alginate (SA), bovine serum albumin (BSA), and humic acid (HA) were selected as representative membrane foulants. We examined the fouling behavior of these three selected model foulants over different adsorption durations (i.e., ~2300 and ~20,000 s). The fouling experiments were performed under conditions with and without the presence of Ca²⁺. For the SA-Ca²⁺ system, a longer adsorption duration slightly increased adsorption amount of SA but sharply reduced the reversibility (from 86.8 % to 12.9 %). For BSA-Ca²⁺, extended time did not change the deposition amount of BSA on the membrane surface, but led to more residual BSA after cleaning (reversibility decreased from 11.3 % to 4.5 %). Similarly, in the HA-Ca²⁺ system, adsorption duration barely influenced the adsorption amount of HA, while reduced its reversibility from 39.4 to 32.2 %. Therefore, time duration significantly influenced the amount and reversibility of membrane fouling depending on their chemical property. Corresponding results can be well reflected by a selected mathematical model. Further investigation on relevant mechanisms was conducted, quartz crystal microbalance with dissipation (QCM-D) and atomic force microscope (AFM) measurements indicated that longer adsorption duration resulted in more compacted fouling layer and stronger foulant-membrane interaction force. Our results suggest that time (adsorption duration) plays an important role in determining the reversibility of membrane fouling, while the severity is related to the inherent characteristics of foulants.

Importance of origin and characteristics of biopolymers in reversible and irreversible fouling of ultrafiltration membranes

The present work compares the chemical properties of isolated biopolymers of different origins and their fouling potential during ultrafiltration (UF). The biopolymers were extracted from secondary wastewater effluent as effluent organic matter (EfOM) and from surface water as natural organic matter (NOM). Multiple analytical techniques were used to characterize the isolates. The characterization results revealed that EfOM biopolymers were more enriched in protein-type structures compared to the NOM organics, and they presented significant differences in the reversibility of membrane fouling. Dissolved in pure water, EfOM biopolymers led to more irreversible fouling than that caused by NOM isolates. Dosing divalent cations (e.g., Ca²⁺) into the solutions increased the irreversibility of both types of fouling, while aggravating NOM fouling more significantly. Further investigation was conducted to understand the interaction between EfOM and NOM biopolymers during formation of the fouling layer. The results showed that the interaction between these two types of organics was negligible in the absence of salts. These findings highlight the importance of a comprehensive understanding of biopolymers from different origins, considering their chemical properties and water chemistry, which have valuable implications for selecting suitable membrane fouling control strategies for treating water from different origins.