Polybenzimidazoles containing bulky substituents and ether linkages for high-temperature proton exchange membrane fuel cell applications

Grafting of Amine End-Functionalized Side-Chain Polybenzimidazole Acid-Base Membrane with Enhanced Phosphoric Acid Retention Ability for High-Temperature Proton Exchange Membrane Fuel Cells

A high phosphoric acid uptake and retention capacity are crucial for the high performance and stable operation of phosphoric acid/polybenzimidazole (PA/PBI)-based high-temperature proton exchange membranes. In this work, amine end-functionalized side-chain grafted PBI (AGPBI) with different grafting degrees are synthesized to enhance both the phosphoric acid uptake and the acid retention ability of the accordingly formed membranes. The optimized acid-base membrane exhibits a PA uptake of 374.4% and an anhydrous proton conductivity of 0.067 S cm-1 at 160 °C, with the remaining proton conductivity percentages of 91.0% after a 100 h stability test. The accordingly fabricated membrane electrode assembly deliver peak power densities of 0.407 and 0.638 W cm-2 under backpressure of 0 and 200 kPa, which are significantly higher than 0.305 and 0.477 W cm-2 for the phosphoric acid-doped unmodified PBI membrane under the same conditions.

Effect of Thickness and Outlet Area Fraction of Macroporous Gas Diffusion Layers on Oxygen Transport Resistance in Water Injection Simulations

Enhanced water removal through the gas diffusion layer (GDL) is important for the design of high-performance proton exchange fuel cells. In this work, the effects of GDL thickness and open area fraction at the GDL/flow field interface are examined under water invasion for a carbon-paper GDL (similar to Toray TGP-H series). Both uncompressed and inhomogeneously compressed samples are considered. Transport in heterogeneous, macroporous GDLs is modeled by means of a hybrid 3D discrete/continuum formulation based on a subdivision of the porous medium into control volumes due to the lack of a well-defined separation between pore and layer scales. Capillary-dominated transport of liquid water is simulated with an invasion percolation algorithm, while oxygen diffusion is simulated with a continuum formulation. Model predictions are validated with previous numerical and experimental data. It is shown that the combination of thin GDLs ($$\mathrm {thickness} \sim 100\; \mu \mathrm {m}$$ thickness ∼ 100 μ m ) and high GDL/flow field open area fractions can facilitate water removal/oxygen supply from/to the catalyst layer and can provide a more uniform oxygen distribution over large cell active areas. In agreement with previous work, porous flow fields with pore sizes comparable to the GDL thickness are good candidates to meet the above requirements, while improving water removal from the flow field (higher gas-phase velocity than conventional millimeter-sized channels) and ensuring a more uniform assembly compression.

Polybenzimidazole-Based Polymer Electrolyte Membranes for High-Temperature Fuel Cells: Current Status and Prospects

Polymer electrolyte membrane fuel cells (PEMFCs) expect a promising future in addressing the major problems associated with production and consumption of renewable energies and meeting the future societal and environmental needs. Design and fabrication of new proton exchange membranes (PEMs) with high proton conductivity and durability is crucial to overcome the drawbacks of the present PEMs. Acid-doped polybenzimidazoles (PBIs) carry high proton conductivity and long-term thermal, chemical, and structural stabilities are recognized as the suited polymeric materials for next-generation PEMs of high-temperature fuel cells in place of Nafion® membranes. This paper aims to review the recent developments in acid-doped PBI-based PEMs for use in PEMFCs. The structures and proton conductivity of a variety of acid-doped PBI-based PEMs are discussed. More recent development in PBI-based electrospun nanofiber PEMs is also considered. The electrochemical performance of PBI-based PEMs in PEMFCs and new trends in the optimization of acid-doped PBIs are explored.

Non-planar backbone structure polybenzimidazole membranes with excellent solubility, high proton conductivity, and better anti-oxidative for HT-PEMFCs

This work introduces a bulky stereostructure monomer (BPY) to obtain a series of novel non-planar BPY-PBI-x polymers, which exhibit excellent solubility, high proton conductivity, and better anti-oxidative for HT-PEMFCs.