Understanding the doping effect toward the design of CO2-tolerant perovskite membranes with enhanced oxygen permeability

An excellent bismuth-doped perovskite cathode with high activity and CO2 resistance for solid-oxide fuel cells operating below 700 °C

Lowering the operating temperatures of solid-oxide fuel cells (SOFCs) is critical, although achieving success in this endeavor has proven challenging. Herein, Bi0.15Sr0.85Co0.8Fe0.2O3-δ (BiSCF) is systematically evaluated as a carbon dioxide (CO2)-tolerant and highly active cathode for SOFCs. BiSCF, which features Bi3+ with an ionic radius similar to Ba2+, exhibits activity (e.g., 0.062 Ω cm2 at 700 °C) comparable to that of Ba0.5Sr0.5Co0.8Fe0.2O3-δ and PrBaCo2O5+δ, while demonstrating a considerable advantage over Bi-doped cathodes. Moreover, BiSCF exhibits long-term stability over a period of 500 h, and an anode-supported cell with BiSCF achieves a power density of 912 mW cm-2 at 650 °C. The CO2-poisoned BiSCF exhibits quick reversibility or slight activation after returning to normal conditions. The exceptional CO2 tolerance of BiSCF can be attributed to its reduced basicity and high electronegativity, which effectively restrict surface Sr diffusion and hinder subsequent carbonate formation. These findings highlight the substantial potential of BiSCF for SOFCs operating below 700 °C.

Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal-air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O2 to water (H2O) or from O2 to hydrogen peroxide (H2O2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.

Perovskite Membranes: Advancements and Challenges in Gas Separation, Production, and Capture

Perovskite membranes have gained considerable attention in gas separation and production due to their unique properties such as high selectivity and permeability towards various gases. These membranes are composed of perovskite oxides, which have a crystalline structure that can be tailored to enhance gas separation performance. In oxygen enrichment, perovskite membranes are employed to separate oxygen from air, which is then utilized in a variety of applications such as combustion and medical devices. Moreover, perovskite membranes are investigated for carbon capture applications to reduce greenhouse gas emissions. Further, perovskite membranes are employed in hydrogen production, where they aid in the separation of hydrogen from other gases such as methane and carbon dioxide. This process is essential in the production of clean hydrogen fuel for various applications such as fuel cells and transportation. This paper provides a review on the utilization and role of perovskite membranes in various gas applications, including oxygen enrichment, carbon capture, and hydrogen production.

Fergusonite-type rare earth niobates ANbO4 (A = Nd, Sm, and Eu) as electrode modifiers: deep insights into A site variations towards bifunctional electrochemical sensing applications

Lanthanide orthoniobates, LnNbO₄ (Ln = Nd, Sm, and Eu), are a domineering class of binary metal oxides with significant catalytic behavior and effective charge transfer ability, acting as eminent candidates to be explored as electrode materials. However, niobates have limitations to be used in sensing platforms due to the complicated synthetic procedures, which have been addressed in this study by proposing a facile hydrothermal tactic based on in situ homoleptic complex formation. All three niobates are isostructural with the monoclinic form of fergusonite structure, which was confirmed by XRD studies. The impact of the A site variation in the fergusonite crystal was verified by FTIR spectroscopy analysis, and the elemental composition was determined by XPS studies. FESEM with EDX spectroscopy obviously proved the morphological differences. Furthermore, a LnNbO₄-modified GCE was employed to detect pharmaceutical pollutants, namely, furazolidone (FZD) and dimetridazole (DMZ). Cyclic voltammetry studies were used to optimize the parameters of the sensing platform, and differential pulse voltammetry was performed to obtain the detection limits and linear range. SmNbO₄/GCE exhibited superior performance to other electrodes with a wide linear range of 0.01 μM to 264 μM and LOD values of 4 nM and 2 nM for FZD and DMZ, respectively. Finally, the feasibility of the proposed electrode in real-time analysis was studied by extending the voltammetry experiment to saliva and water samples.

Rational design of mixed ionic-electronic conducting membranes for oxygen transport

The mixed ionic-electronic conducting (MIEC) oxides have generated significant research efforts in the scientific community during the last 40 years. Since then, many MIEC compounds, most of which are based on perovskite oxides, have been synthesized and characterized. These compounds, when heated to high temperatures, form solid ceramic membranes with high oxygen ionic and electrical conductivity. The driving force for oxygen ion transport is the ionic transfer of oxygen from the air as a result of the differential partial pressure of oxygen across the membrane. Electronic and ionic transport in a range of MIEC materials has been studied using the defect theory, particularly when dopants are introduced to the compound of interest. As a result, many types of ionic oxygen transport limits exist, each with a distinct phase shift depending on the temperature and partial pressure of oxygen in use. In combination with theoretical principles, this work attempts to evaluate the research community's major and meaningful achievements in this subject throughout the preceding four decades.

Tuning the Phase Transition of SrFeO3-δ by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

Developing high-performance cathodes with sufficient stability against CO₂ rooting in ambient atmosphere is crucial to realizing the practical application of solid-oxide fuel cells. Herein, the Mn dopant is investigated to regulate the phase structure and cathode performance of SrFeO_3-δ perovskites through partially replacing the B-site Fe. Compared with parent SrFeO_3-δ, Mn-doped materials, SrFe_1-xMn_xO_3-δ (x = 0.05 and 0.1), show stabilized cubic perovskites at room temperature. Meanwhile, doping Mn accelerates the oxygen reduction reaction process, showing a reduced polarization resistance of 0.155 Ω·cm² at 700 °C for SrFe_0.95Mn_0.05O_3-δ, which is less than 30% of SrFeO_3-δ. In addition, the Mn dopant improves the chemical oxygen surface exchange and bulk diffusion coefficients. Furthermore, Mn enhances the tolerance toward CO₂ corrosion in various CO₂ atmospheres. Density functional theory calculations also reveal that Mn can strengthen the structural stability and increase the activity for the oxygen reduction reaction.

Synthesis and Characterization of 40 wt % Ce0.9Pr0.1O2-δ-60 wt % NdxSr1-xFe0.9Cu0.1O3-δ Dual-Phase Membranes for Efficient Oxygen Separation

Dense, H₂- and CO₂-resistant, oxygen-permeable 40 wt % Ce_0.9Pr_0.1O_2–δ–60 wt % Nd_xSr_1−xFe_0.9Cu_0.1O_3−δdual-phase membranes were prepared in a one-pot process. These Nd-containing dual-phase membranes have up to 60% lower material costs than many classically used dual-phase materials. The Ce_0.9Pr_0.1O_2−δ–Nd_0.5Sr_0.5Fe_0.9Cu_0.1O_3−δ sample demonstrates outstanding activity and a regenerative ability in the presence of different atmospheres, especially in a reducing atmosphere and pure CO₂ atmosphere in comparison with all investigated samples. The oxygen permeation fluxes across a Ce_0.9Pr_0.1O_2−δ–Nd_0.5Sr_0.5Fe_0.9Cu_0.1O_3−δ membrane reached up to 1.02 mL min⁻¹ cm⁻² and 0.63 mL min⁻¹ cm⁻² under an air/He and air/CO₂ gradient at T = 1223 K, respectively. In addition, a Ce_0.9Pr_0.1O_2–δ–Nd_0.5Sr_0.5Fe_0.9Cu_0.1O_3–δ membrane (0.65 mm thickness) shows excellent long-term self-healing stability for 125 h. The repeated membrane fabrication delivered oxygen permeation fluxes had a deviation of less than 5%. These results indicate that this highly renewable dual-phase membrane is a potential candidate for long lifetime, high temperature gas separation applications and coupled reaction–separation processes.

Catalytic mixed conducting ceramic membrane reactors for methane conversion

Schematic of catalytic mixed conducting ceramic membrane reactors for various reactions: (a) O₂ permeable ceramic membrane reactor; (b) H₂ permeable ceramic membrane reactor; (c) CO₂ permeable ceramic membrane reactor.

A perovskite-type Nd0.75Sr0.25Co0.8Fe0.2O3−δ cathode for advanced solid oxide fuel cells

Perovskite-type Nd_0.75Sr_0.25Co_0.8Fe_0.2O_3−δ (NSCF) has shown excellent oxygen reduction reaction properties (an area specific polarization resistance of 0.1 Ω cm² at 700 °C) as a composite cathode (30 wt% La_0.8Sr_0.2Ga_0.8Mg_0.2O_3−δ (LSGM)) with remarkable chemical stability under CO₂.

Designing CO2-resistant oxygen-selective mixed ionic-electronic conducting membranes: guidelines, recent advances, and forward directions

CO₂ resistance is an enabling property for the wide-scale implementation of oxygen-selective mixed ionic-electronic conducting (MIEC) membranes in clean energy technologies, i.e., oxyfuel combustion, clean coal energy delivery, and catalytic membrane reactors for greener chemical synthesis. The significant rise in the number of studies over the past decade and the major progress in CO₂-resistant MIEC materials warrant systematic guidelines on this topic. To this end, this review features the pertaining aspects in addition to the recent status and advances of the two most promising membrane materials, perovskite and fluorite-based dual-phase materials. We explain how to quantify and design CO₂ resistant membranes using the Lewis acid-base reaction concept and thermodynamics perspective and highlight the relevant characterization techniques. For perovskite materials, a trade-off generally exists between CO₂ resistance and O₂ permeability. Fluorite materials, despite their inherent CO₂ resistance, typically have low O₂ permeability but this can be improved via different approaches including thin film technology and the recently developed minimum internal electronic short-circuit second phase and external electronic short-circuit decoration. We then elaborate the two main future directions that are centralized around the development of new oxide compositions capable of featuring simultaneously high CO₂ resistance and O₂ permeability and the exploitation of phase reactions to create a new conductive phase along the grain boundaries of dual-phase materials. The final part of the review discusses various complimentary characterization techniques and the relevant studies that can provide insights into the degradation mechanism of oxide-based materials upon exposure to CO₂.