Cell membrane mimetic coating immobilized by mussel-inspired adhesion on commercial ultrafiltration membrane to enhance antifouling performance

Unraveling the Adhesion Behavior of Different Cell Lines on Biomimetic PEDOT Interfaces: The Role of Surface Morphology and Antifouling Properties

The poly(3,4-ethylenedioxythiophene) (PEDOT) interface, renowned for its biocompatibility and intrinsic conductivity, holds substantial potential in biosensing and cellular modulation. Through strategic functionalization, PEDOT derivatives can be adaptable for multifaceted applications. Notably, integrating phosphorylcholine (PC) groups into PEDOT, mimicking the hydrophilic headgroups from cell membranes, confers exceptional antifouling properties on the coating. This study systematically investigated biomolecule interactions with distinct forms of PEDOT, incorporating variations in surface modifications and structure. Zwitterionic PEDOT-PC was electropolymerized on smooth and nanostructured surfaces using various feeding ratios in electrolytes to finely control the antifouling properties of the interface. Precise electropolymerization conditions governed the attainment of smooth and nanostructured filamentous surfaces. The study employed a quartz crystal microbalance with dissipation (QCM-D) to assess protein binding behavior. Bovine serum albumin (BSA), lysozyme (LYZ), cytochrome c (cyt c), and fibronectin (FN) were used to evaluate their binding affinities for PEDOT films. FN, a pivotal extracellular matrix component, was included for connecting to cell adhesion behavior. Furthermore, the cellular adhesion behaviors on PEDOT interfaces were evaluated. Three cell lines─MG-63 osteosarcoma, HeLa cervical cancer, and fibroblast NIH/3T3 were examined. The presence of PC moieties significantly altered the adhesive response, including the number of attached cells, their morphologies, and nucleus shrinkage. MG-63 cells exhibited the highest tolerance for PC moieties. A feeding ratio of PEDOT-PC exceeding 70% resulted in cell apoptosis. This study contributes to understanding biomolecule adsorption on PEDOT surfaces of diverse morphologies and degrees of the antifouling moiety. Meanwhile, it also sheds light on the responses of various cell types.

Preparation and characterization of superior hydrophilic PVDF/DA membranes by the self-polymerization approach of dopamine

Polyvinylidene fluoride (PVDF) membranes are favored for their excellent properties. However, the inherent strong hydrophobicity of PVDF membranes limits their development in the field of water treatment. The objective of this study was to improve the performance of PVDF membranes using the self-polymerization, strong adhesion properties, and biocompatible effects of dopamine (DA). The PVDF/DA membrane modification conditions were simulated and optimized using response surface methodology (RSM), and the experimental design was used to investigate three main parameters. The results showed that the DA solution concentration of 1.65 g/L, the coating time of 4.5 h, the post-treatment temperature of 25°C, the contact angle decreased from 69° to 33.9°, and the pure water flux on the PVDF/DA membrane was higher than that on the original membrane. The absolute value of the relative error between the actual and predicted values is only 3.36 %. In the MBR parallel comparison test, compared with the PVDF/DA membrane, the total amount of extracellular polymers (EPS) of the PVDF membrane increased by 1.46 times and the polysaccharide increased by 1.56 times, which further showed that the PVDF/DA modified membrane had the excellent anti-pollution ability. Through Alpha diversity analysis, the biodiversity detected on PVDF/DA membranes was higher than that of PVDF membranes, which further proved its good bio-adhesion ability. These findings could offer a reference for the hydrophilicity, antifouling, and stability of PVDF/DA membranes, which would establish the foundation for the comprehensive applications in MBR.

Crosslinked biomimetic coating modified stainless-steel-mesh enables completely self-cleaning separation of crude oil/water mixtures

The development of high-flux, durable and completely self-cleaning membranes is highly desired for separation of massive oil/water mixtures. Herein, differently crosslinked poly(2-methacryloyloxylethyl phosphorylcholine) (PMPC) brush grafted stainless steel mesh (SSM) membranes (SSM/PMPCs) were fabricated by integrating of mussel inspired universal adhesion and crosslinking chemistry with surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET-ATRP). The durability and self-cleaning performance of the prepared SSM membranes were evaluated by separating sticky crude oil/water mixtures in a continuous recycling dead-end filtration device. The water filtration flux driven by gravity reached 60,000 L⋅m^-2⋅h^-1 with a separation efficiency of over 99.98%. Furthermore, zero-flux-decline was observed during a 5 h continuous filtration when assisted by mechanical stirring. More significantly, such a completely self-cleaning separation of the well crosslinked SSM/PMPC2 membrane under optimized flux and stirring conditions had been operated cumulatively for 190 h in 30 days without any additional cleaning. These significant advances are more promising for practical applications in crude oil-contaminated water treatments and massive oil/water mixture separation.

Ultradense Erythrocyte Bionic Layer Used to Capture Circulating Tumor Cells and Plasma-Assisted High-Purity Release

The isolation and detection of rare circulating tumor cells (CTCs) from patient peripheral blood can help early diagnosis of cancer and evaluation of therapeutic outcomes. At present, most of the available strategies for enriching CTCs face serious problems with purity due to the nonspecific interactions between the capture medium and leukocytes. Inspired by the immune evasion ability of homologous red blood cells (RBCs), we modified the tumor-targeting molecule folic acid (FA) on the surface of RBCs by hydrophobic interactions. Under the treatment of polybrene, the charges on the surface of RBCs are neutralized, which reduces the mutual repulsion force. Furthermore, RBCs treated with polyethylene also have excellent deformability, thereby enabling engineered RBCs to form a dense bionic layer on the adhesive glass slide, which can greatly inhibit the nonspecific adhesion of leukocytes. The bionic layer can achieve high-purity enrichment of tumor cells in phosphate-buffered saline (PBS), and we can achieve high-activity release in plasma. The cell count showed over 80% capture efficiency and over 70% release rate, and the purity of CTCs obtained in the artificial blood sample after release was higher than 90%. The RBC bionic surface coating is notably cost-effective and highly applicable for CTC isolation in clinic practice, and thus provides new prospects for designing cell-material interfaces for advanced cell-based biomedical studies in the future.

Membrane Biofouling Control by Surface Modification of Quaternary Ammonium Compound Using Atom-Transfer Radical-Polymerization Method with Silica Nanoparticle as Interlayer

A facile approach to fabricate antibiofouling membrane was developed by grafting quaternary ammonium compounds (QACs) onto polyvinylidene fluoride (PVDF) membrane via surface-initiated activators regenerated by electron transfer atom-transfer radical-polymerization (ARGET ATRP) method. During the modification process, a hydrophilic silica nanoparticle layer was also immobilized onto the membrane surface as an interlayer through silicification reaction for QAC grafting, which imparted the membrane with favorable surface properties (e.g., hydrophilic and negatively charged surface). The QAC-modified membrane (MQ) showed significantly improved hydrophilicity and permeability mainly due to the introduction of silica nanoparticles and exposure of hydrophilic quaternary ammonium groups instead of long alkyl chains. Furthermore, the coverage of QAC onto membrane surface enabled MQ membrane to have clear antibacterial effect, with an inhibition rate ~99.9% of Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive), respectively. According to the batch filtration test, MQ had better antibiofouling performance compared to the control membrane, which was ascribed to enhanced hydrophilicity and antibacterial activity. Furthermore, the MQ membrane also exhibited impressive stability of QAC upon suffering repeated fouling–cleaning tests. The modification protocols provide a new robust way to fabricate high-performance antibiofouling QAC-based membranes for wastewater treatment.

Impact of MWCO and Dopamine/Polyethyleneimine Concentrations on Surface Properties and Filtration Performance of Modified Membranes

The mussel-inspired method has been investigated to modify commercial ultrafiltration membranes to induce antifouling characteristics. Such features are essential to improve the feasibility of using membrane processes in protein recovery from waste streams, wastewater treatment, and reuse. However, some issues still need to be clarified, such as the influence of membrane pore size and the polymer concentration used in modifying the solution. The aim of the present work is to study a one-step deposition of dopamine (DA) and polyethyleneimine (PEI) on ultrafiltration membrane surfaces. The effects of different membrane molecular weight cut-offs (MWCO, 20, 30, and 50 kDa) and DA/PEI concentrations on membrane performance were assessed by surface characterization (FTIR, AFM, zeta potential, contact angle, protein adsorption) and permeation of protein solution. Results indicate that larger MWCO membranes (50 kDa) are most benefited by modification using DA and PEI. Moreover, PEI is primarily responsible for improving membrane performance in protein solution filtration. The membrane modified with 0.5:4.0 mg mL^-1 (DA: PEI) presented a better performance in protein solution filtration, with only 15% of permeate flux drop after 2 h of filtration. The modified membrane can thus be potentially applied to the recovery of proteins from waste streams.

Anchorable phosphorylcholine copolymer synthesis and cell membrane mimetic antifouling coating fabrication for blood compatible applications

Protein adsorption and platelet activation on biomedical devices contacting blood may lead to the formation of thrombus. The thrombogenicity of biomaterials could be minimized or prevented by anchoring a cell membrane mimetic antifouling coating (CMMAC). Here, we report the construction of a CMMAC by a newly designed 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymer (PMPCC) containing 5-20 carboxylic long arm side chains. The long arm provides its end carboxylic group with more freedom and a larger reaction space for an easier and more efficient surface anchoring. With the assistance of mussel-inspired universal adhesive polydopamine (PDA), different material surfaces precoated with PDA can immobilize the PMPCC via multipoint anchoring of the randomly distributed carboxylic side chains. The multipoint anchoring results in a stabilized and condensed PDA-PMPCC coating. The phosphorylcholine zwitterions of the densely immobilized PMPCC polymers form a cell outer membrane mimetic interface in an aqueous environment, endowing excellent properties of resisting protein adsorption, platelet activation and blood cell adhesion. More importantly, the PDA-PMPCC-coated glass surface can suppress thrombus formation for more than 24 h, while the bare glass surface forms obvious thrombus in 6 h tested in the same blood. Furthermore, the fabrication of the PDA-PMPCC coating is simple and material-independent. Therefore, the simple synthesis, facile surface coating and excellent hemocompatibility of the PMPCC make it a promising material for biomimetic surface modification.

Superhydrophilicity and strong salt-affinity: Zwitterionic polymer grafted surfaces with significant potentials particularly in biological systems

In recent years, zwitterionic polymers have been frequently reported to modify various surfaces to enhance hydrophilicity, antifouling and antibacterial properties, which show significant potentials particularly in biological systems. This review focuses on the fabrication, properties and various applications of zwitterionic polymer grafted surfaces. The "graft-from" and "graft-to" strategies, surface grafting copolymerization and post zwitterionization methods were adopted to graft lots type of the zwitterionic polymers on different inorganic/organic surfaces. The inherent hydrophilicity and salt affinity of the zwitterionic polymers endow the modified surfaces with antifouling, antibacterial and lubricating properties, thus the obtained zwitterionic surfaces show potential applications in biosystems. The zwitterionic polymer grafted membranes or stationary phases can effectively separate plasma, water/oil, ions, biomolecules and polar substrates. The nanomedicines with zwitterionic polymer shells have "stealth" effect in the delivery of encapsulated drugs, siRNA or therapeutic proteins. Moreover, the zwitterionic surfaces can be utilized as wound dressing, self-healing or oil extraction materials. The zwitterionic surfaces are expected as excellent support materials for biosensors, they are facing the severe challenges in the surface protection of marine facilities, and the dense ion pair layers may take unexpected role in shielding the grafted surfaces from strong electromagnetic field.

Bioinspired EVAL membrane modified with cilia-like structures showing simultaneously enhanced permeability and antifouling properties

A simple and effective strategy to simultaneously enhance the permeability and antifouling properties of ethylene vinyl alcohol (EVAL) membrane was developed based on the bioinspired natural cleaner, cilia. Taking clue from the self-cleaning effect of cilia, supramolecular polyrotaxanes (PRs) with sliding and rotating cyclic molecules along linear chains were synthesized using azide-alkyne click chemistry. Cilia-like PRs were incorporated into EVAL matrix in the fabrication of modified EVAL membranes. Cilia-like structures protruding from the membrane surface have been observed by SEM, TEM and AFM. By imitating natural ciliary movements, these structures provided a proactive self-cleaning system to remove the foulants. The introduction of cilia-like PRs enhanced the surface roughness and hydrophilicity, and significantly enhanced permeability by 55.3% compared to raw EVAL membrane. Moreover, the membrane modified with cilia-like PRs showed an excellent antifouling property with a lower water flux decline (12.6%) and higher water flux recovery (94%) in dynamic fouling tests. Furthermore, this modified membrane develops the scope of bioinspired membranes, inspiring more attractive potential applications in self-cleaning materials, dynamic membranes and supramolecular machines.

Folate Ligand Orientation Optimized during Cell Membrane Mimetic Micelle Formation for Enhanced Tumor Cell Targeting

Nanocarriers with strong tumor cell targeting ability have been expected to overcome limitations of cancer chemotherapy. Herein, cell membrane mimetic micelles were prepared from a random copolymer (PMNCF) containing cell membrane phosphorylcholine zwitterion, cholesterol, and tumor cell targeting folic acid (FA) at the side chain ends. Surface orientation of the FA ligand was optimized during PMNCF micelle preparation by controlling solvent solubility for FA. The out-oriented ligands on the micelles were immobilized by the strongly associated hydration layer around the closely packed phosphorylcholine zwitterions. The doxorubicin (DOX) loaded PMNCF micelles were demonstrated to reduce normal cell toxicity to less than 20%. More significantly, HeLa and MCF-7 tumor cell killing efficacy of the optimized formulation was enhanced to 160% compared with that of free DOX. The excellent performances of the drug loaded PMNCF micelles on both tumor cell killing and normal cell toxicity reducing efficacies reveal great potential for developing advanced drug delivery system.

A blood cell repelling and tumor cell capturing surface for high-purity enrichment of circulating tumor cells

A red blood cell membrane mimetic surface decorated with FA and RGD ligands can efficiently capture tumor cells with high selectivity.

Multifunctionalized polyethersulfone membranes with networked submicrogels to improve antifouling property, antibacterial adhesion and blood compatibility

Intensive efforts have been employed in modifying biomedical membranes. Among them, blending is recognized as a simple method. However, the conventional blending materials commonly lead to an insufficient modification, which is mainly caused by the poor miscibility between the blending materials and the matrixes, the elution of the hydrophilic materials from the matrixes during the use and storage, and the insufficient surface enrichment of the blending materials. Aiming to solve the abovementioned disadvantages, we developed novel polyethersulfone/poly(acrylic acid-co-N-vinyl-2-pyrrolidone) networked submicrogels (PES/P(AA-VP) NSs), which were blended with PES to enhance the antifouling properties, antibacterial adhesion and haemocompatible properties of PES membranes. As results, the PES/P(AA-VP) NSs showed good miscibility with the PES matrix, and hydrophilic submicrogels would enrich onto the membrane surface during the phase inversion process due to the surface segregation. The entanglement between the PES matrix and the networked submicrogels would effectively limit the elution of the submicrogels. In conclusion, the modified PES membranes prepared by blending with the PES/P(AA-VP) NSs might draw great attention for the application in haemodialysis fields.

Recent Trends in Mussel-Inspired Catechol-Containing Polymers (A Review)

Syntheses and applications of mussel-inspired polymeric materials have gained a foothold in research in recent years. Mussel-inspired chemistry coupled to Michael addition and Schiff’s base reactions was the key success for this intensive research. Unequivocally, The basic building brick of these materials is catechol-containing moiety, namely, 3,4-dihydroxyphenyl-L-alanine (L-DOPA or DOPA) and dopamine (DA). These catechol-based units within the chemical structure of the material ensure chiefly its adhesive characteristic to adherends of different natures. The newly-made catechol-bearing polymeric materials exhibit unique features, implying their importance in several uses and applications. Technology advent is being advantaged with these holdfast mussel protein-like materials. This review sheds light into the recent advances of such mussel-inspired materials for their adhesion capacity to several substrata of different natures, and for their applications mainly in antifouling coatings and nanoparticles technology.