Acid-base block copolymer brushes grafted graphene oxide to enhance proton conduction of polymer electrolyte membrane

Acid–base core–shell microspheres are incorporated into proton exchange membranes to effectively alleviate the rapid decline in proton conductivity at low humidity

The development of a proton exchange membrane (PEM) that can avoid rapid decay of proton conductivity under low humidity is of great significance for the practical application of PEMFC. In this study, acid–base core–shell microspheres (PCSMs-MA@TAC) with a carboxylic acid core and a triazine shell were synthesized by distillation-precipitation polymerization using cross-linked carboxylic acid microspheres (PMAA) as seeds. These PCSMs were then incorporated into a sulfonated poly(ether ether ketone) matrix to make hybrid membranes. Incorporation of PCSMs microspheres can not only strengthen the vehicle mechanism by increasing the water uptake of the membrane, but also the acid–base pairs formed at the SPEEK/PCSMs interface provide a new low-energy barrier pathway for proton hopping, thereby enhancing the proton conduction of the Grotthuss mechanism. The results show that when the content is 10 wt%, the proton conductivity of the SPEEK/PCSMs-MA@TAC composite membrane can reach 0.161 S cm−1 at 80°C and 100% RH, which is 19.3% higher than the SPEEK control membrane (0.135 S cm−1). In particular, even at 60% RH, the proton conductivity of the SPEEK/PCSMs-MA@TAC-10 composite membrane is still 67 mS cm−1, which is 3.16 times higher than that of the SPEEK membrane. Therefore, the SPEEK/PCSMs-MA@TAC composite membrane can maintain superior performance even under high temperature and low humidity conditions.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

One Dimensional Enhanced Anhydrous Proton Conduction in Well Defined Molecular Columns Induced by Non-Covalent Interactions

1D anhydrous proton conduction is enhanced significantly in ionic channels created by self-assembly of functionalized organic phosphonic acid and aromatic heterocyclic 1,2,4-triazole molecules. This study reveals high proton conduction in one dimension through a well-defined supramolecular architecture in which two different molecules undergo host-guest synergy and self-assemble to provide two-fold advantages: 1) formation of the ionic channels and 2) higher proton conduction in the absence of water. A clear correlation is found between the phenomena of ionic channels and anhydrous conductivity in the absolute dry state and we demonstrate that the one-dimensional conductivity can be as high as that recorded for 3D channels in, for instance, Nafion.

Practical use of polymer brushes in sustainable energy applications: interfacial nanoarchitectonics for high-efficiency devices

The discovery and development of novel approaches, materials and manufacturing processes in the field of energy are compelling increasing recognition as a major challenge for contemporary societies. The performance and lifetime of energy devices are critically dependent on nanoscale interfacial phenomena. From the viewpoint of materials design, the improvement of current technologies inevitably relies on gaining control over the complex interface between dissimilar materials. In this sense, interfacial nanoarchitectonics with polymer brushes has seen growing interest due to its potential to overcome many of the limitations of energy storage and conversion devices. Polymer brushes offer a broad variety of resources to manipulate interfacial properties and gain molecular control over the synergistic combination of materials. Many recent examples show that the rational integration of polymer brushes in hybrid nanoarchitectures greatly improves the performance of energy devices in terms of power density, lifetime and stability. Seen in this light, polymer brushes provide a new perspective from which to consider the development of hybrid materials and devices with improved functionalities. The aim of this review is therefore to focus on what polymer brush-based solutions can offer and to show how the practical use of surface-grafted polymer layers can improve the performance and efficiency of fuel cells, lithium-ion batteries, organic radical batteries, supercapacitors, photoelectrochemical cells and photovoltaic devices.

A novel sPEEK nanocomposite membrane with well-controlled sPOSS aggregation in tunable nanochannels for fast proton conduction

To greatly increase the proton conductivity of a sPEEK nanocomposite membrane without water swelling problems, sulfonated PEEK (sPEEK) nanocomposite membranes were prepared by regulating the nanocomposite concentration of sulfonated POSS (sPOSS). Incorporation of sPOSS into sPEEK afforded a 39% increase in proton conductivity at 80 °C/100% RH and a 70% increase in cell performance at 1.5 wt% sPOSS concentration. In particular, water swelling problems were not observed even with the attained proton conductivity, as with Nafion. The water swelling of the pristine sPEEK membrane was 18.8%; it increased to 24.4% at 5.0 wt% of sPOSS loading, which was 11.1% lower than that of Nafion. The high modulus of sPOSS and the good distribution of sPOSS also enhanced the tensile strength by 40.5% and the strain by 65.8% compared with the pristine sPEEK membrane. At more than 1.5 wt% sPOSS concentration, the conductivity and power output of the nanocomposite membranes decreased despite the increased IEC, which is highly related to aggregation of sPOSS nanoparticles in the proton conducting nanochannels and changes in the nanochannel size. The sizes of the nanochannels were measured by SAXS, and it was found that expansion of the nanochannels was enhanced at 1.5 wt% by the best distribution of sPOSS and absorption of water. The increased IEC, expanded nanochannels and distribution of sPOSS without aggregation promoted proton conduction through the nanochannels.

Constructing Continuous Proton-Conducting Highways within Sulfonated Poly(Arylene Ether Nitrile) Composite Membrane by Incorporating Amino-Sulfo-Bifunctionalized GO

To obtain a proton exchange membrane (PEM) with high proton conductivity and low methanol permeability, a novel amino-sulfo-bifunctionalized GO (NSGO) was synthesized and explored as a filler for sulfonated poly(arylene ether nitrile) (SPEN). The result indicated that the microstructure of composite membranes was rearranged by NSGO and strong acid⁻base interactions were formed between fillers and the SPEN matrix, affording enhanced thermal, mechanical, and dimensional stabilities. Moreover, it was found that NSGO fillers were uniformly dispersed in the SPEN matrix, generating efficient proton-conducting paths along the SPEN/NSGO interface. Meanwhile, the sulfonic and amino groups of NSGO served as additional proton hopping sites to connect the ionic clusters in the SPEN matrix, creating interconnected and long-range ionic pathways. In such a way, proton-conducting highways with low energy barriers are constructed, which enhance the proton conductivity of the composite membranes via the Grotthuss mechanism. Furthermore, the composite membranes also effectively prevent methanol permeation, and therefore high selectivity (the ratio of proton conductivity and methanol permeability) is endowed. Compared to SPEN membrane, a 3.6-fold increase in selectivity is obtained for the optimal composite membrane. This study will provide a new strategy for the preparation of high-performance PEM.

A graphene oxide polymer brush based cross-linked nanocomposite proton exchange membrane for direct methanol fuel cells

Functional polymer brush modified graphene oxide (FPGO) with functional linear polysiloxane brushes was synthesized via surface precipitation polymerization (sol-gel) and chemical modification. Then, FPGO was covalently cross-linked to the sulfonated polysulfone (SPSU) matrix to obtain novel SPSU/FPGO cross-linked nanocomposite membranes. Meanwhile, SPSU/GO composite membranes and a pristine SPSU membrane were fabricated as control groups. Reduced agglomeration of the inorganic filler and better interfacial interaction, which are benefit to increase diffusion resistance of methanol and to generate continuous channels for fast proton transportation at elevated temperature, were observed in SPSU/FPGO cross-linked membranes. Moreover, the enhanced membrane stability (thermal, oxidative and dimensional stability) and good mechanical performance also guaranteed their proton conducting durability. It is noteworthy that the SPSU/FPGO-1 cross-linked membrane possesses the best comprehensive properties among all the prepared membranes and Nafion®117, it acquires the highest proton conductivity of 0.462 S cm-1 at 90 °C under hydrated conditions together with a low methanol permeability of 1.71 × 10-6 cm2 s-1 at 30 °C. The resulting high membrane selectivity displays the great potential of the SPSU/FPGO cross-linked membrane for DMFCs application.