Influence of temperature on gas solubility in thermally rearranged (TR) polymers

Tetraethylammonium Salts as Solid, Easy to Handle Ethylene Precursors and Their Application in Mizoroki-Heck Coupling

In this study, we introduce a convenient Heck vinylation protocol that eliminates the requirement for ethylene gas as a coupling partner. In contrast to traditional methodologies, quaternary ammonium salts can serve as solid olefin precursors under ambient atmosphere conditions. The practicality of this method, distinguished by its convenience and safety in a one-pot reaction, renders it appealing for applications in research and discovery context.

Enhanced gas separation and mechanical properties of fluorene-based thermal rearrangement copolymers

A series of thermal rearrangement (TR) copolymer membranes were prepared by the copolymerization of 9,9-bis(3-amino-4-hydroxyphenoxyphenyl) fluorene (BAHPPF), 9,9-bis(3-amino-4-hydroxyphenyl)fluorene (BAHPF) and 2,2'-bis(3,4'-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), followed by thermal imidization and further thermal rearrangement. The effects of molar ratio of diamines on the structure and properties of copolymer membranes were studied. The copolymer precursors CP-4:6 and CP-5:5 exhibited excellent mechanical properties. The mechanical properties of precursor membranes rapidly decreased with the increase of thermal treatment temperatures, but the tensile strength of TRCP-4:6 still reached 21.2 MPa. In general, the gas permeabilities of TR copolymers increased with the increase of BAHPF content. Comparatively, TRCP-3:7 and TRCP-4:6 showed higher gas permeabilities, coupled with high O2/N2 and CO2/CH4 selectivities. Especially, the H2, CO2, O2, N2 and CH4 permeabilities of TRCP-4:6 reached 244.4, 269.0, 46.8, 5.20 and 4.60 Barrers respectively, and the selectivities for CO2/CH4 and O2/N2 were 58.48 and 9.00, which exceeded the 2008 upper bound. Therefore, these TR copolymer membranes are expected to be one of the candidate materials for gas separation applications.

Gas Transport in a Polymer of Intrinsic Microporosity (PIM-1) Substituted with Pseudo-Ionic Liquid Tetrazole-Type Structures

We report a side group modification strategy to tailor the structure of a polymer of intrinsic microporosity (PIM-1). PIM-1 with an average of ∼50% of the repeat units converted to tetrazole is prepared, and a subsequent reaction then introduces three types of pseudo-ionic liquid tetrazole-like structures (PIM-1-ILx). The presence of pseudo-ionic liquid functional groups in the PIM-1 structure increases gas selectivities for O2/N2 and CO2/N2, while it decreases pure-gas permeabilities. The overall gas separation performance of PIM-1-ILx is close to the 2008 Robeson upper bound. Since the tetrazoles are versatile groups for building a wide variety of ionic liquids, the modification method can be expanded to explore a broad spectrum of functional groups.

Dense Glass Packing Can Slow Reactions with an Atmospheric Gas

Previous work utilizing crystal polymorphs has established the importance of the molecular packing environment for modulating solid-gas reactivity. Here, we show, for the first time, that the chemical stability of an amorphous material in contact with a reactive gas can be significantly improved by controlling glass packing. We utilize the reaction of indomethacin with ammonia as this system has been well-characterized for crystalline polymorphs. For these experiments, physical vapor deposition (PVD) is used to prepare glasses of indomethacin with a range of densities and thermal stabilities. The indomethacin-ammonia reactivity is assessed through the increase in mass of glassy thin films exposed to ammonia gas, as characterized by a quartz crystal microbalance. Indomethacin glasses vapor-deposited at substrate temperatures below the glass transition temperature (T_g) show unprecedented decrease in reaction rates relative to the liquid-cooled glass, by as much as 1 order of magnitude, with the densest glasses having the slowest reactions. The diminished solubility of ammonia in dense PVD glasses is found to be a major factor in their remarkable chemical stability. As chemically stable amorphous solids are in demand for applications including pharmaceuticals and organic electronics, this work provides a strategy to improve performance of these materials.

Molecular Modeling Investigations of Sorption and Diffusion of Small Molecules in Glassy Polymers

With a wide range of applications, from energy and environmental engineering, such as in gas separations and water purification, to biomedical engineering and packaging, glassy polymeric materials remain in the core of novel membrane and state-of the art barrier technologies. This review focuses on molecular simulation methodologies implemented for the study of sorption and diffusion of small molecules in dense glassy polymeric systems. Basic concepts are introduced and systematic methods for the generation of realistic polymer configurations are briefly presented. Challenges related to the long length and time scale phenomena that govern the permeation process in the glassy polymer matrix are described and molecular simulation approaches developed to address the multiscale problem at hand are discussed.

Maximizing Ether Oxygen Content in Polymers for Membrane CO2 Removal from Natural Gas

Membrane materials for CO₂ removal from natural gas are based on glassy polymers with a high CO₂/CH₄ diffusivity selectivity. However, these polymers suffer from competitive sorption by heavy hydrocarbons that decreases CO₂ permeability and physical aging that reduces gas permeability with time. We circumvent these issues by designing rubbery, solubility-selective polymers with a ratio of ether/ester oxygen to carbon as high as 0.8 through the use of 1,3-dioxolane and 1,3,5-trioxane. The ether/ester oxygen groups interact favorably with CO₂ but do not interact with CH₄, leading to a high CO₂/gas solubility selectivity that is unaffected by heavy hydrocarbons in the raw natural gas. These polar groups are incorporated in short branches to yield an amorphous and rubbery nature, leading to high gas permeability that is stable over time. A polymer with an O/C ratio of 0.71 (P71) shows a mixed-gas CO₂ permeability of 320 Barrers and a CO₂/CH₄ selectivity of 21 in the simulated natural gas at 50 °C, which is independent of the hexane content and above the upper bound for CO₂/CH₄ separation at 50 °C.

Modelling Mixed-Gas Sorption in Glassy Polymers for CO₂ Removal: A Sensitivity Analysis of the Dual Mode Sorption Model

In an effort to reduce the experimental tests required to characterize the mixed-gas solubility and solubility-selectivity of materials for membrane separation processes, there is a need for reliable models which involve a minimum number of adjustable parameters. In this work, the ability of the Dual Mode Sorption (DMS) model to represent the sorption of CO₂/CH₄ mixtures in three high free volume glassy polymers, poly(trimethylsilyl propyne) (PTMSP), the first reported polymer of intrinsic microporosity (PIM-1) and tetrazole-modified PIM-1 (TZ-PIM), was tested. The sorption of gas mixtures in these materials suitable for CO₂ separation has been characterized experimentally in previous works, which showed that these systems exhibit rather marked deviations from the ideal pure-gas behavior, especially due to competitive effects. The accuracy of the DMS model in representing the non-idealities that arise during mixed-gas sorption was assessed in a wide range of temperatures, pressures and compositions, by comparing with the experimental results available. Using the parameters obtained from the best fit of pure-gas sorption isotherms, the agreement between the mixed-gas calculations and the experimental data varied greatly in the different cases inspected, especially in the case of CH₄ absorbed in mixed-gas conditions. A sensitivity analysis revealed that pure-gas data can be represented with the same accuracy by several different parameter sets, which, however, yield markedly different mixed-gas predictions, that, in some cases, agree with the experimental data only qualitatively. However, the multicomponent calculations with the DMS model yield more reliable results than the use of pure-gas data in the estimation of the solubility-selectivity of the material.