Electrical double layer ion transport with cell voltage-pulse potential coupling circuit for separating dilute lead ions from wastewater

A novel CNTs/QCS/BiOBr composite membrane with electron-ion transfer channel for Br- recovery in ESIX process

Based on the superior selectivity of bismuth oxybromide (BiOBr) for Br^-, the excellent electrical conductivity of carbon nanotubes (CNTs), and the ion exchange capacity of quaternized chitosan (QCS), a three-dimensional network composite membrane electrode CNTs/QCS/BiOBr was constructed, in which BiOBr served as the storage space for Br^-, CNTs provided the electron transfer pathway, and QCS cross-linked by glutaraldehyde (GA) was used for ion transfer. The CNTs/QCS/BiOBr composite membrane exhibits superior conductivity after the introduction of the polymer electrolyte, which is seven orders of magnitude higher than that of conventional ion-exchange membranes. Furthermore, the addition of the electroactive material BiOBr improved the adsorption capacity for Br^- by a factor of 2.7 in electrochemically switched ion exchange (ESIX) system. Meanwhile, the CNTs/QCS/BiOBr composite membrane displays excellent Br^- selectivity in mixed solutions of Br^-, Cl^-, SO₄^2- and NO₃^-. Therein, the covalent bond cross-linking within the CNTs/QCS/BiOBr composite membrane endows it great electrochemical stability. The synergistic adsorption mechanism of the CNTs/QCS/BiOBr composite membrane provides a new direction for achieving more efficient ion separation.

Stabilizing the Nanosurface of LiNiO2 Electrodes by Varying the Electrolyte Concentration: Correlation with Initial Electrochemical Behaviors for Use in Aqueous Li-Ion Batteries

This study attempted to stabilize the nanosurface of LiNiO₂ (LNO) electrodes by varying the electrolyte concentration, significantly influencing its initial electrochemical behaviors for use in aqueous lithium-ion batteries. The charge/discharge capacities, reversibility, and cyclability of LNO were improved during initial cycles with an increase in the concentration of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). As determined by the galvanostatic intermittent titration technique, the superior diffusivity of Li⁺ ions in the LNO electrode is also obtained in the concentrated electrolyte. Nanoscale observation of the LNO surface revealed that its morphology is maintained relatively well in the concentrated electrolyte while it is destroyed in dilute electrolytes after the initial electrochemical cycles. These results are considered to be attributable to the variation of the interface condition in the electrical double layer with an increase in the electrolyte concentration, thus stabilizing the nanosurface of LNO by suppressing the dissolution of Ni ions from the surface. Additionally, in situ X-ray diffraction analysis demonstrated that LNO shows more stable phase transitions and volume changes as the electrolyte concentration increases, indicating that its structural changes in bulk can be directly related to the state of the nanosurface, which has a positive impact on the initial electrochemical behaviors in this system.

Theoretical calculation assisted materials screening of BiOX (X = F, Cl, Br, I) for electrochemical absorption of cesium ions

The electrochemical switching ion exchange (ESIX) technique has been widely used for the separation and recovery of radioactive cesium ions (Cs⁺) from wastewater. In this study, a series of BiOX (X = F, Cl, Br, I) materials were first evaluated for their absorption properties to Cs⁺ through density functional theory (DFT) calculations. The calculations predict that BiOBr has the best absorption performance among the four materials, BiOF, BiOCl, BiOBr, and BiOI, due to its high absorption energy and low ion migration energy barrier to Cs⁺. Simultaneously, the selectivity calculations revealed that BiOBr also showed the best selectivity for Cs⁺ compared with Li⁺ and Na⁺. Subsequently, four materials were prepared using the hydrothermal synthesis method and their electrochemical absorption performance was tested. The results showed that BiOBr has the highest electroactivity, and its absorption capacity was up to 16 mg Cs⁺/g BiOBr in a solution mixture of 50 ppm Li⁺, Na⁺, and Cs⁺. Based on our theoretical calculations and experiments, our findings provide prospective insights for predicting the electrochemical absorption performance of materials using first-principles calculations.

Theoretical and experimental investigations of BiOCl for electrochemical adsorption of cesium ions

BiOCl was found to have excellent electrochemical adsorption properties for cesium ions (Cs⁺) in electrochemically switched ion exchange (ESIX). In this work, BiOCl nanosheets were synthesized by a hydrothermal method and used for electrochemical adsorption of Cs⁺. The experimental results showed that BiOCl exhibited higher electrochemical adsorption selectivity for Cs⁺ than Li⁺ and Na⁺. Quantum chemical calculations based on density functional theory (DFT) were first performed to compare the adsorption and migration mechanisms of three ions Li⁺, Na⁺, and Cs⁺ in BiOCl crystals. The calculation results revealed that the excellent electrochemical adsorption performance of BiOCl for Cs⁺ is due to the interaction of embedded Cs with Cl and Bi in BiOCl crystals. This makes it have a higher adsorption energy and a lower ion migration energy barrier due to the balance of interaction forces. In this work experimental and theoretical calculations were used to systematically analyze the adsorption and migration of three ions in BiOCl, which has important guiding significance for the design of highly-efficient electroactive materials for electrochemical adsorption of Cs⁺.

Revealing the formation dynamics of the electric double layer by means of in-situ Rutherford backscattering spectrometry

We report on a new versatile experimental setup for in situ Rutherford backscattering spectrometry at solid-liquid interfaces which enables investigations of electric double layers directly and in a quantitative manner. A liquid cell with a three-electrode arrangement is mounted in front of the beam line, and a thin Si₃N₄ window (thickness down to 150 nm) separates the vacuum of the detector chamber from the electrolyte in the cell. By minimizing the contribution of the window to the measurement, a large variety of elements at the solid-liquid interface with sensitivities far below one monolayer can be monitored. The attachment of Ba onto the Si₃N₄ surface as a function of contact time and pH value of the electrolyte solution was chosen as an example system. From our measurement, we can not only follow the evolution of the double layer but also derive limits for the point of zero charge for the Si₃N₄ surface. Our findings of 5.7≤pH_PZC≤6.2 are in good agreement with values found in the literature obtained by other techniques. Despite focusing on a specific system in this work, the presented setup allows for a large variety of in situ investigations at solid-liquid interfaces such as, but not limited to, tracing electrochemical reactions and monitoring segregation, adsorption, and dissolution and corrosion processes.