Ionic liquid compatibility in polyethylene oxide/siloxane ion gel membranes

Electro-casting for Superior Gas Separation Membrane Performance and Manufacturing

Gas separation polymer membranes play a pivotal role in various industrial processes including carbon capture and hydrogen production. However, the inherent trade-off between permeability and selectivity coupled with challenges in membrane manufacturing has hindered their widespread industrial deployment. To address the permselectivity challenges, researchers have explored increasingly complex polymers, composite systems, and other materials. In this study, we introduce a novel membrane manufacturing technique called "electro-casting" that not only enables efficient membrane fabrication but also enhances the trade-off of traditional polymer-based membranes. We fabricated cellulose acetate (CA) membranes embedded with 1-ethyl-3-methyl imidazolium via electro-casting and performed a comparative analysis of structural, morphological, and gas transport characteristics against membranes made via conventional casting techniques. We discovered that electro-casted membranes exhibited a unique crystalline structure, surface topology that induced a remarkable 200% improvement in CO2/N2 selectivity and a 110% increase in CO2/CH4 selectivity. The electric field generated during the manufacturing process played a crucial role in altering the supramolecular structure of the polymer, thereby increasing the separation properties of the membranes as well as their thermal and mechanical features. Electro-casting induced a polymer crystallization effect that disrupted the permeability-selectivity trade-off observed in conventional membranes, while producing highly stable membranes. Moreover, the simplicity of this manufacturing method and its significant impact on membrane properties have the potential to accelerate the deployment of gas separation membranes, facilitating the transition toward a NetZero chemical industry.

Technological advancements in the use of ionic liquid- membrane systems for CO2 capture from biogas/flue gas - A review

Carbon capture has become a very important method for curbing the problems associated with the release of carbon dioxide into the atmosphere, which in turn has detrimental effects on the planet and its inhabitants. Ionic liquids and membrane separation have been explored in this review paper as effective means of capturing carbon dioxide. An innovative approach to CO₂ capture is the use of Ionic liquids (ILs) since they exhibit certain significant traits such as good stability (thermal, mechanical and chemical), inflammability and high absorptive capacities. Ionic liquids (ILs) are widely regarded as nontoxic substances. Viscosity and thermal degradation of ILs at temperatures slightly above 100 °C are the major disadvantages of ILs. Membrane separation is a technique used for the effective separation of substances by materials bearing holes in a continuous structure. Membrane technology has gained significant improvements, over the years. Several ILs and membrane systems were considered in this work. Their weaknesses, strengths, permeability, selectivity, operating conditions and carbon capture efficiencies, were all highlighted in order to gain a good perspective on ways by which the individual systems can be improved upon. The study considered several polymer-Ionic liquid hybrid materials as viable options for CO₂ capture from a post-combustion process. Different ILs were scrutinized for possible integration in membranes by taking full advantage of their individual properties and harnessing their tune-able characteristics in order to improve the overall carbon capture performance of the system. Several options for improving the mechanical, chemical, and thermal stabilities of the hybrid systems were considered including the use of cellulose acetate membrane, nanoparticles (graphene oxide powder) alongside potential ionic liquids. Doping membranes with ILs and nanoparticulates such as graphene oxide serves as a potential method for enhancing the CO₂ capture of membranes and this review provides several evidences that serve as proofs for this concept.

Emerging iongel materials towards applications in energy and bioelectronics

In the past two decades, ionic liquids (ILs) have blossomed as versatile task-specific materials with a unique combination of properties, which can be beneficial for a plethora of different applications. The additional need of incorporating ILs into solid devices led to the development of a new class of ionic soft-solid materials, named here iongels. Nowadays, iongels cover a wide range of materials mostly composed of an IL component immobilized within different matrices such as polymers, inorganic networks, biopolymers or inorganic nanoparticles. This review aims at presenting an integrated perspective on the recent progress and advances in this emerging type of material. We provide an analysis of the main families of iongels and highlight the emerging types of these ionic soft materials offering additional properties, such as thermoresponsiveness, self-healing, mixed ionic/electronic properties, and (photo)luminescence, among others. Next, recent trends in additive manufacturing (3D printing) of iongels are presented. Finally, their new applications in the areas of energy, gas separation and (bio)electronics are detailed and discussed in terms of performance, underpinning it to the structural features and processing of iongel materials.

Confined Ionic Liquid-Built Gas Transfer Pathways for Efficient Propylene/Propane Separation

The separation of light olefins from paraffins using membrane technology is highly desired; however, synthetic polymer membranes generally suffer a pernicious trade-off between permeability and selectivity. Herein, we show that this limitation can be overcome by constructing selective gas transfer pathways in a polymer matrix, as demonstrated by incorporating composites of ionic liquids and zeolitic imidazolate frameworks (ZIFs) to form mixed-matrix membranes. Using propylene/propane separation as a model system, dramatic improvements in the propylene permeability of 218.4 Barrer and propylene/propane separation factor of 45.7 were achieved compared to the values obtained using individual components as a filler. The synergy between the high solubility of the gas molecules in ionic liquids and the size screening ability of ZIF exacerbates the difference in the transmission of propylene and propane, thus leading to superior separation performance. This work presents a promising strategy for the design of membranes for efficient gas separation.

Intramolecular Vibrational Energy Relaxation of CO2 in Cross-Linked Poly(ethylene glycol) Diacrylate-Based Ion Gels

Ultrafast two-dimensional infrared spectroscopy (2D-IR) and Fourier transform infrared spectroscopy (FTIR) were used to measure carbon dioxide (CO₂) in 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf₂N]), cross-linked low-molecular-weight poly(ethylene glycol) diacrylate (PEGDA), and an ion gel composed of a 50 vol % blend of the two. The center frequency of the antisymmetric stretch, ν₃, of CO₂ shifts monotonically to lower wavenumbers with increasing polymer content, with the largest line width in the ion gel (6 cm^-1). Increasing polymer content slows both spectral diffusion and vibrational energy relaxation (VER) rates. An unexpected excited-state absorbance peak appears in the 2D-IR of cross-linked PEGDA due to VER from the antisymmetric stretch into the bending mode, ν₂. Thirty-two response functions are necessary to describe the observed features in the 2D-IR spectra. Nonlinear least-squares fitting extracts both spectral diffusion and VER rates. In the ion gel, CO₂ exhibits spectral diffusion dynamics that lie between that of the pure compounds. The kinetics of VER reflect both fast excitation and de-excitation of the bending mode, similar to the ionic liquid (IL), and slow overall vibrational population relaxation, similar to the cross-linked polymer. The IL-like and polymer-like dynamics suggest that the CO₂ resides at the interface of the two components in the ion gel.

A Review on Ionic Liquid Gas Separation Membranes

Ionic liquids have attracted the attention of the industry and research community as versatile solvents with unique properties, such as ionic conductivity, low volatility, high solubility of gases and vapors, thermal stability, and the possibility to combine anions and cations to yield an almost endless list of different structures. These features open perspectives for numerous applications, such as the reaction medium for chemical synthesis, electrolytes for batteries, solvent for gas sorption processes, and also membranes for gas separation. In the search for better-performing membrane materials and membranes for gas and vapor separation, ionic liquids have been investigated extensively in the last decade and a half. This review gives a complete overview of the main developments in the field of ionic liquid membranes since their first introduction. It covers all different materials, membrane types, their preparation, pure and mixed gas transport properties, and examples of potential gas separation applications. Special systems will also be discussed, including facilitated transport membranes and mixed matrix membranes. The main strengths and weaknesses of the different membrane types will be discussed, subdividing them into supported ionic liquid membranes (SILMs), poly(ionic liquids) or polymerized ionic liquids (PILs), polymer/ionic liquid blends (physically or chemically cross-linked 'ion-gels'), and PIL/IL blends. Since membrane processes are advancing as an energy-efficient alternative to traditional separation processes, having shown promising results for complex new separation challenges like carbon capture as well, they may be the key to developing a more sustainable future society. In this light, this review presents the state-of-the-art of ionic liquid membranes, to analyze their potential in the gas separation processes of the future.

Influence of Anion Structure on Thermal, Mechanical and CO2 Solubility Properties of UV-Cross-Linked Poly(ethylene glycol) Diacrylate Iongels

Iongel-based CO₂ separation membranes were prepared by fast (< 1 min) UV-initiated polymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of different ionic liquids (ILs) with the [C₂mim]⁺ cation and anions such as [TFSI]^-, [FSI]^-, [C(CN)₃]^- and [B(CN)₄]^-. The four ILs were completely miscible with the non-ionic PEGDA network. Transparent and free-standing iongels containing between 60 and 90 %wt of IL were obtained and characterized by diverse techniques (FTIR, TGA, DSC, DMTA, SEM, CO₂ solubility and pure gas permeability). The thermal and mechanical stability of the iongels, as well as CO₂ solubility, were found to be strictly dependent on the IL content and the anion's nature. The TGA results indicated that the iongels mostly follow the thermal profile of the respective neat ILs. The DMTA analysis revealed that the iongels based on fluorinated anions have higher storage modulus than those of cyano-functionalized anions. Conversely, the PEGDA-C(CN)₃ iongels presented the highest CO₂ solubility values ranging from 72 to 80 mmol/g. Single CO₂ permeabilities of 583 ± 29 Barrer and ideal CO₂/N₂ selectivities of 66 ± 3 were obtained with the PEGDA-70 C(CN)₃ iongel membrane. This work demonstrates that the combination of PEGDA with high contents of the best performing ILs is a promising and simple strategy, opening up new possibilities in the design of high-performance iongel membranes for CO₂ separation.