Commercial perfluorosulfonic acid membranes for vanadium redox flow battery: Effect of ion-exchange capacity and membrane internal structure

Stability and Performance of Commercial Membranes in High-Temperature Organic Flow Batteries

Redox flow batteries (RFB) often operate at extreme pH conditions and may require cooling to prevent high temperatures. The stability of the battery membranes at these extreme pH-values at high temperatures is still largely unknown. In this paper, a systematic screening of the performance and stability of nine commercial membranes at pH 14 and pH ≤ 0 with temperatures up to 80 °C is conducted in an organic aqueous RFB. Swelling, area resistance, diffusion crossover, battery performance and membrane stability after 40-80 °C temperature treatment are shown, after which a recommendation is made for different user scenarios. The Aquivion E98-05 membrane performed best for both the Tiron/2,7-AQDS battery and the DHPS/Fe(CN)6 battery at 40 mA/cm2, with stable results after 1 week of storage at 80 °C. At 80 mA/cm2, E-620-PE performed best in the DHPS/Fe(CN)6 battery, while Sx-050DK performed best in the Tiron/2,7-AQDS battery.

Block Copolymer-Based Membranes for Vanadium Redox Flow Batteries: Synthesis, Characterization, and Performance

Nonfluorinated polymers have been widely proposed to replace Nafion as raw materials for redox flow battery ion-exchange membranes. Hereby, block copolymers based on polysulfone (PSU) and polyphenylsulfone (PPSU) are synthesized and employed as precursors of membranes for vanadium redox flow batteries. A series of copolymers with varying molar proportions of PSU (75/25, 60/40, 50/50 mol %) were prepared. The 60/40 and 75/25 copolymers exhibit concentrated sulfonic groups predominantly in the PSU unit, favoring the formation of hydrophobic and hydrophilic domains. The 50/50 copolymer presents a balanced degree of sulfonation between the two units, leading to a homogeneous distribution of sulfonic groups. An ex situ study of these materials comprising vanadium ion permeability and chemical and mechanical stability was performed. The best performance is achieved with 50/50 membranes, which exhibited performance comparable to commercial Nafion membranes. These results signify a promising breakthrough in the pursuit of high-performance, sustainable membranes for next-generation VRFBs.

A Review of Capacity Decay Studies of All-vanadium Redox Flow Batteries: Mechanism and State Estimation

As a promising large-scale energy storage technology, all-vanadium redox flow battery has garnered considerable attention. However, the issue of capacity decay significantly hinders its further development, and thus the problem remains to be systematically sorted out and further explored. This review provides comprehensive insights into the multiple factors contributing to capacity decay, encompassing vanadium cross-over, self-discharge reactions, water molecules migration, gas evolution reactions, and vanadium precipitation. Subsequently, it analyzes the impact of various battery parameters on capacity. Based on this foundation, the article expounds upon the significance of battery internal state estimation technology. Additionally, the review also summarizes domestic and international mathematical models utilized for simulating capacity decay, serving as a valuable reference for future research endeavors. Finally, through the comparison of traditional experimental methods and mathematical modeling methods, this article offers effective guidance for the future development direction of battery state monitoring. This review generally overview the problems related to the capacity attenuation of all-vanadium flow batteries, which is of great significance for understanding the mechanism behind capacity decay and state monitoring technology of all-vanadium redox flow battery.

Functional materials for aqueous redox flow batteries: merits and applications

Redox flow batteries (RFBs) are promising electrochemical energy storage systems, offering vast potential for large-scale applications. Their unique configuration allows energy and power to be decoupled, making them highly scalable and flexible in design. Aqueous RFBs stand out as the most promising technologies, primarily due to their inexpensive supporting electrolytes and high safety. For aqueous RFBs, there has been a skyrocketing increase in studies focusing on the development of advanced functional materials that offer exceptional merits. They include redox-active materials with high solubility and stability, electrodes with excellent mechanical and chemical stability, and membranes with high ion selectivity and conductivity. This review summarizes the types of aqueous RFBs currently studied, providing an outline of the merits needed for functional materials from a practical perspective. We discuss design principles for redox-active candidates that can exhibit excellent performance, ranging from inorganic to organic active materials, and summarize the development of and need for electrode and membrane materials. Additionally, we analyze the mechanisms that cause battery performance decay from intrinsic features to external influences. We also describe current research priorities and development trends, concluding with a summary of future development directions for functional materials with valuable insights for practical applications.

Development of flow battery technologies using the principles of sustainable chemistry

Realizing decarbonization and sustainable energy supply by the integration of variable renewable energies has become an important direction for energy development. Flow batteries (FBs) are currently one of the most promising technologies for large-scale energy storage. This review aims to provide a comprehensive analysis of the state-of-the-art progress in FBs from the new perspectives of technological and environmental sustainability, thus guiding the future development of FB technologies. More importantly, we evaluate the current situation and future development of key materials with key aspects of green economy and decarbonization to promote sustainable development and improve the novel energy framework. Finally, we present an analysis of the current challenges and prospects on how to effectively construct low-carbon and sustainable FB materials in the future.

An Electrolyte with Elevated Average Valence for Suppressing the Capacity Decay of Vanadium Redox Flow Batteries

Nafion series membranes are widely used in vanadium redox flow batteries (VRFBs). However, the poor ion selectivity of the membranes to vanadium ions, especially for V²⁺, results in a rapid capacity decay during cycling. Although tremendous efforts have been made to improve the membrane's ion selectivity, increasing the ion selectivity without sacrificing the proton conductivity is still a challenging issue. In this work, instead of focusing on enhancing the membranes' ion selectivity, we develop an efficient valence regulation strategy to suppress the capacity decay caused by the crossover of V²⁺ in VRFBs. Despite the discharge capacity of the VRFB with the elevated average valence electrolytes (V^3.68+) being slightly lower than that with commercial electrolytes (V^3.50+) in the first 35 cycles, the accumulated discharge capacity in 400 cycles is improved by 52.33%. Moreover, this method is efficient, is easy to scale up, and provides deep insights into the capacity decay mechanism of VRFBs.

Family Tree for Aqueous Organic Redox Couples for Redox Flow Battery Electrolytes: A Conceptual Review

Redox flow batteries (RFBs) are an increasingly attractive option for renewable energy storage, thus providing flexibility for the supply of electrical energy. In recent years, research in this type of battery storage has been shifted from metal-ion based electrolytes to soluble organic redox-active compounds. Aqueous-based organic electrolytes are considered as more promising electrolytes to achieve "green", safe, and low-cost energy storage. Many organic compounds and their derivatives have recently been intensively examined for application to redox flow batteries. This work presents an up-to-date overview of the redox organic compound groups tested for application in aqueous RFB. In the initial part, the most relevant requirements for technical electrolytes are described and discussed. The importance of supporting electrolytes selection, the limits for the aqueous system, and potential synthetic strategies for redox molecules are highlighted. The different organic redox couples described in the literature are grouped in a "family tree" for organic redox couples. This article is designed to be an introduction to the field of organic redox flow batteries and aims to provide an overview of current achievements as well as helping synthetic chemists to understand the basic concepts of the technical requirements for next-generation energy storage materials.

Trust is good, control is better: a review on monitoring and characterization techniques for flow battery electrolytes

Flow batteries (FBs) currently are one of the most promising large-scale energy storage technologies for energy grids with a large share of renewable electricity generation. Among the main technological challenges for the economic operation of a large-scale battery technology is its calendar lifetime, which ideally has to cover a few decades without significant loss of performance. This requirement can only be met if the key parameters representing the performance losses of the system are continuously monitored and optimized during the operation. Nearly all performance parameters of a FB are related to the two electrolytes as the electrochemical storage media and we therefore focus on them in this review. We first survey the literature on the available characterization methods for the key FB electrolyte parameters. Based on these, we comprehensively review the currently available approaches for assessing the most important electrolyte state variables: the state-of-charge (SOC) and the state-of-health (SOH). We furthermore discuss how monitoring and operation strategies are commonly implemented as online tools to optimize the electrolyte performance and recover lost battery capacity as well as how their automation is realized via battery management systems (BMSs). Our key findings on the current state of this research field are finally highlighted and the potential for further progress is identified.

A Chemistry and Microstructure Perspective on Ion-Conducting Membranes for Redox Flow Batteries

Redox flow batteries (RFBs) are among the most promising grid-scale energy storage technologies. However, the development of RFBs with high round-trip efficiency, high rate capability, and long cycle life for practical applications is highly restricted by the lack of appropriate ion-conducting membranes. Promising RFB membranes should separate positive and negative species completely and conduct balancing ions smoothly. Specific systems must meet additional requirements, such as high chemical stability in corrosive electrolytes, good resistance to organic solvents in nonaqueous systems, and excellent mechanical strength and flexibility. These rigorous requirements put high demands on the membrane design, essentially the chemistry and microstructure associated with ion transport channels. In this Review, we summarize the design rationale of recently reported RFB membranes at the molecular level, with an emphasis on new chemistry, novel microstructures, and innovative fabrication strategies. Future challenges and potential research opportunities within this field are also discussed.

Half-Cell State of Charge Monitoring for Determination of Crossover in VRFB-Considerations and Results Concerning Crossover Direction and Amount

Membranes play a crucial role in efficiency and longevity of flow batteries. Vanadium flow batteries suffer self-discharge and capacity fading due to crossover of electrolyte components through the membrane from one battery half-cell to the other. We consider the impact of vanadium species crossing ion exchange membranes on state of charge of the battery and we present a simple method to determine crossoverll open circuit potential measurements. State of s. State of charge for the negative and positive half-cell is simulated based on assumptions and simplifications for cation and anion exchange membranes and different crossover parameters. We introduce a crossover index "IndXovr" which enables the determination of crossover direction from state of charge data for the negative and positive half-cell and therewith identification of the half-cell in which predominant self-discharge occurs. Furthermore IndXovr allows statements on crossover amount in dependence on state of operation. Simulated case studies are compared to experimental state of charge values estimated from half-cell potential measurements. Our results reveal that half-cell potential monitoring respectively half-cell SOC estimation, is a simple and suitable tool for the identification of crossover direction and relative amount of crossover in VFB.

Long-term electricity generation and denitrification performance of MFCs with different exchange membranes and electrode materials

Different biocathode electrode materials (graphite felt and carbon brush, GF and CB) and exchange membranes (proton exchange membrane and cation exchange membrane, PEM and CEM) were used in three microbial fuel cell (MFC) configurations operated for 300-days to investigate the power generation and the COD and N removal performance. Results showed no effect on the COD removal (all above 96%); however, the power generation (46.11 mW·h) and denitrification performance (68.0 ± 1.6%) of the MFC-B (GF + PEM) system were higher than those of the other systems (MFC-A: CB + PEM; MFC-C: CB + CEM) (P < 0.01), and the power generation and denitrification performance of all three systems decreased with time (P < 0.01). By analyzing the physicochemical properties of the exchange membrane and cathode electrode materials, the reasons that affect the power generation performance of the system were clarified. Furthermore, the increase in bioelectricity enhanced the electricity-related nitrification and denitrification reactions. The average 300-day unit denitrification cost of MFC-A was 4.2 and 6.3 times that of MFC-B and MFC-C, respectively. Comprehensive consideration of electricity generation, denitrification, and service life, combined with cost analysis and better selection of construction materials, provides a theoretical basis for the long-term stable operation and sustainable application of MFCs.