Supported bicyclic amidine ionic liquids as a potential CO2/N2 separation medium

Technological advancements in the use of ionic liquid- membrane systems for CO2 capture from biogas/flue gas - A review

Carbon capture has become a very important method for curbing the problems associated with the release of carbon dioxide into the atmosphere, which in turn has detrimental effects on the planet and its inhabitants. Ionic liquids and membrane separation have been explored in this review paper as effective means of capturing carbon dioxide. An innovative approach to CO₂ capture is the use of Ionic liquids (ILs) since they exhibit certain significant traits such as good stability (thermal, mechanical and chemical), inflammability and high absorptive capacities. Ionic liquids (ILs) are widely regarded as nontoxic substances. Viscosity and thermal degradation of ILs at temperatures slightly above 100 °C are the major disadvantages of ILs. Membrane separation is a technique used for the effective separation of substances by materials bearing holes in a continuous structure. Membrane technology has gained significant improvements, over the years. Several ILs and membrane systems were considered in this work. Their weaknesses, strengths, permeability, selectivity, operating conditions and carbon capture efficiencies, were all highlighted in order to gain a good perspective on ways by which the individual systems can be improved upon. The study considered several polymer-Ionic liquid hybrid materials as viable options for CO₂ capture from a post-combustion process. Different ILs were scrutinized for possible integration in membranes by taking full advantage of their individual properties and harnessing their tune-able characteristics in order to improve the overall carbon capture performance of the system. Several options for improving the mechanical, chemical, and thermal stabilities of the hybrid systems were considered including the use of cellulose acetate membrane, nanoparticles (graphene oxide powder) alongside potential ionic liquids. Doping membranes with ILs and nanoparticulates such as graphene oxide serves as a potential method for enhancing the CO₂ capture of membranes and this review provides several evidences that serve as proofs for this concept.

Effectiveness of ionic liquid-supported membranes for carbon dioxide capture: a review

The world's population explosion creates a need for natural resources for energy, which will become a significant contributor to global climate change. As we all know, carbon dioxide (CO₂) is one of the most critical elements of the global greenhouse gas effect. CO₂ capture and storage innovations have piqued researchers' attention in recent decades. Compared to other methods, membrane separation has some positive performance in CO₂ capture. CO₂ capture with membrane separation using enhanced ionic liquids (ILs) is described in this review. ILs have made an appearance in CO₂ capture work as the potential additive, and companies and academics have been interested in CO₂ separation for the past two decades. This article comprehensively analyzes the current modern approach in ILs and IL-based membranes for gas separation processes. Based on the latest literature and performance data, this work provides a complete compressive examination of types of ILs and IL-supported membrane performances. ILs for CO₂ capture were also explored, and IL-based membranes for different ILs were also studied. This study emphasizes the supremacy of novel ILs for CO₂ capture in membrane separation.

Synthesis of Poly(ionic Liquid)s-block-poly(methyl Methacrylate) Copolymer-Grafted Silica Particle Brushes with Enhanced CO2 Permeability and Mechanical Performance

Poly(ionic liquid) (PIL)-based block copolymers are of particular interest as they combine the specific properties of PILs with the self-assembling behaviors of block copolymers, broadening the range of potential applications for PIL-based materials. In this work, three particle brushes: SiO₂-g-poly(methyl methacrylate) (PMMA), SiO₂-g-PIL, and SiO₂-g-PMMA-b-PIL were prepared through surface-initiated atom transfer radical polymerization. Unlike the homogeneous homopolymer particle brushes, the block copolymer particle brush SiO₂-g-PMMA-b-PIL exhibited a bimodal chain architecture and unique phase-separated morphology, which were confirmed by size-exclusion chromatography and transmission electron microscopy. In addition, the influence of the introduction of the PMMA segment on the gas separation and mechanical performance of the PIL-containing block copolymer particle brushes were investigated. A significant improvement of Young's modulus was observed in the SiO₂-g-PMMA-b-PIL compared to the SiO₂-g-PIL bulk films; meanwhile, their gas separation performances (CO₂ permeability and CO₂/N₂ selectivity) were the same, which demonstrates the possibility of improving the mechanical properties of PIL-based particle brushes without compromising their gas separation performance.

Protic/aprotic ionic liquids for effective CO2 separation using supported ionic liquid membrane

Four ionic liquids (ILs) namely, 1-butylsulfonate-3-methylimidazolium P-toluene sulfonate ([BSmim][tos]), 1-butylsulfonate pyridine P-toluene sulfonate ([BSmpy][tos]), 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) and 1-butylpyridine chloride ([Bpy][Cl]) were synthesized for the effective separation of gases CO₂/N₂ and CO₂/CH₄ through supported ionic liquid membranes (SILMs). ILs were confirmed by NMR and FTIR spectroscopy, and their characteristics and physical properties were studied. The ILs were immobilized on the porous hydrophobic 200 μm thick polyvinylidene difluoride (PVDF) support. Pure and mixed gas separation performances of the prepared SILMs were analyzed in a custom-built gas permeation unit. The SILMs were stable up to 0.6 MPa at room temperature without leaching the ionic liquid. [BSmim][tos] was recorded to have the highest solubility coefficient and permeability for CO_2, among other ILs. At 0.5 MPa, for pure CO₂/N₂ and CO₂/CH₄, IL [BSmim][tos] was observed with selectivities of 56.2 and 47.5, respectively. Based on the SILMs separation performance, the ILs synthesized for this work can be ranked as [BSmim][tos] > [BSmpy][tos] > [Bmim][Cl] > [Bpy][Cl]. Moreover, the exceptionally high selectivity values of [BSmim][tos] and [BSmpy][tos] confirms the potential use of ILs for CO₂ separation through SILMs.

Key Applications and Potential Limitations of Ionic Liquid Membranes in the Gas Separation Process of CO2, CH4, N2, H2 or Mixtures of These Gases from Various Gas Streams

Heightened levels of carbon dioxide (CO₂) and other greenhouse gases (GHGs) have prompted research into techniques for their capture and separation, including membrane separation, chemical looping, and cryogenic distillation. Ionic liquids, due to their negligible vapour pressure, thermal stability, and broad electrochemical stability have expanded their application in gas separations. This work provides an overview of the recent developments and applications of ionic liquid membranes (ILMs) for gas separation by focusing on the separation of carbon dioxide (CO₂), methane (CH₄), nitrogen (N₂), hydrogen (H₂)_, or mixtures of these gases from various gas streams. The three general types of ILMs, such as supported ionic liquid membranes (SILMs), ionic liquid polymeric membranes (ILPMs), and ionic liquid mixed-matrix membranes (ILMMMs) for the separation of various mixed gas systems, are discussed in detail. Furthermore, issues, challenges, computational studies and future perspectives for ILMs are also considered. The results of the analysis show that SILMs, ILPMs, and the ILMMs are very promising membranes that have great potential in gas separation processes. They offer a wide range of permeabilities and selectivities for CO₂, CH₄, N₂, H₂ or mixtures of these gases. In addition, a comparison was made based on the selectivity and permeability of SILMs, ILPMs, and ILMMMs for CO₂/CH₄ separation based on a Robeson’s upper bound curves.

Synergy of CO2 Response and Aggregation-Induced Emission in a Block Copolymer: A Facile Way To "See" Cancer Cells

Carbon dioxide (CO₂), an important gas molecule metabolite produced by the tricarboxylic acid cycle, is a direct signal for identifying cancers in cells and tissues. Herein, design and synthesis of a novel "breathable" block polymer supramolecular assembly probe consisting of a hydrophilic block, an amidine-containing CO₂-responsive block, and an aggregation-induced emission (AIE) luminescence block to detect CO₂ metabolized by cancer cells is reported. The triblock copolymer poly-(4-undecoxy tetraphenyl ethylene methacrylate)-b-poly-((N-amidino)-(2,3-dihydro-1H-1, 4-methyl-1, 2,3-triazole)-(ethenylbenzene))-b-poly(ethylene oxide) (PTPE-b-PAD-b-PEO) was successfully synthesized and characterized. This triblock copolymer could be self-assembled into "breathable" aqueous solution vesicles. In the presence of CO₂, the amidine-containing CO₂-responsive block (PAD block) of the vesicle "inhales" an amount of CO₂, which causes the volume of the vesicle to expand. The expansion of the vesicle induces the aggregation of the AIE luminescence block (PTPE block), which resulted in the fluorescence intensity enhancement. The supramolecular vesicles "exhale" CO₂, and the volume and AIE phenomenon of the vesicles decrease when N₂ is passed into the solution. On the basis of this reversible change of fluorescence intensity, HeLa cervical cancer cells, CNE1 nasopharynx cancer cells, 5-8F nasopharynx cancer cells, 16HBE human bronchial epithelial cells, and GES-1 human gastric mucosa epithelial cells have all been successfully detected and identified.