Membrane characterization via evapoporometry (EP) and liquid-liquid displacement porosimetry (LLDP) techniques

Controlling the Thermal Stability of Kyanite-Based Refractory Geopolymers

The present project investigated the thermal stability of cold-setting refractory composites under high-temperature cycles. The proposed route dealt with the feasibility of using fillers with different particle sizes and studying their influence on the thermo-mechanical properties of refractory geopolymer composites. The volumetric shrinkage was studied with respect to particle sizes of fillers (80, 200 and 500 µm), treatment temperature (1050-1250 °C) and amount of fillers (70-85 wt.%). The results, combined with thermal analysis, indicated the efficiency of refractory-based kyanite aggregates for enhancing thermo-mechanical properties. At low temperatures, larger amounts of kyanite aggregates promoted mechanical strength development. Flexural strengths of 45, 42 and 40 MPa were obtained for geopolymer samples, respectively, at 1200 °C, made with filler particles sieved at 80, 200 and 500 µm. In addition, a sintering temperature equal to 1200 °C appeared beneficial for the promotion of densification as well as bonding between kyanite aggregates and the matrix, contributing to the reinforcement of the refractory geopolymer composites without any sign of vitrification. From the obtained properties of thermal stability, good densification and high strength, kyanite aggregates are efficient and promising candidates for the production of environmentally friendly, castable refractory composites.

Non-Destructive Characterization of Industrial Membrane Cartridges by Using Liquid-Liquid Displacement Porosimetry (LLDP)

This works aims to propose and demonstrate the accuracy of a novel method of characterization aimed for non-destructive analysis of microfiltration (MF) membrane cartridges. The method adapts conventional liquid-liquid displacement porosimetry (LLDP) for performing an in-line porosimetric analysis of the membrane cartridges, getting their pore size distributions (PSDs) and mean pore diameters (d_avg). Six commercial filtration cartridges featuring polyethersulfone (PES) pleated membranes were analyzed using a newly designed filtration rig, based on the liquid-liquid displacement porometer, developed at the Institut de la Filtration et des Techniques Séparatives (IFTS) and operated at constant flow. The experimental rig allows the direct and non-destructive characterization of the cartridge in its original presentation. Results have been compared with those obtained by using gas-liquid displacement porosimetry (GLDP) on small membrane coupons detached from such cartridges. The comparison allows us to conclude that the proposed method gives enough accuracy in the determination of porosimetric characteristics of the filters. This method can be used as a precise characterization technique for a non-destructive in-line study of filter performance and can be envisaged as useful to periodic quality or fouling control of the commercial cartridges.

Comparison of Capillary Flow Porometry (CFP) and Liquid Extrusion Porometry (LEP) Techniques for the Characterization of Porous and Face Mask Membranes

This work aims to study the characterization of several membrane filters by using capillary flow porometry (CFP) and liquid extrusion porometry (LEP) to obtain their pore size distributions (PSD) and mean pore diameters (davg). Three polymeric membranes of different materials namely, polyethylene (PET), cellulose nitrate (CN), and FM (face mask), and one inorganic (namely, alumina Al2O3) from ultrafiltration (UF)/microfiltration (MF) and particle separation were analyzed using a pressure constant fluid/liquid extrusion porometer, developed at institute de la filtration et techniques séparatives (IFTS). Several porosimetric fluids have been used to wet and penetrate into the porous/fiber structure. The results show the accuracy of the setup on characterizing membranes in the UF/MF range by CFP, with reasonable agreement with nominal data of the filters. Additionally, LEP extension of the equipment obtained good agreement with nominal data and the CFP results, while filters presenting a microstructure of highly interconnected pores (face mask) resulted in clear differences in terms of resulting PSD and average sizes when CFP and LEP results are compared.