Achieving efficient proton conduction in a MOF-based proton exchange membrane through an encapsulation strategy

Nitrogen-Rich Covalent Organic Frameworks Composited High-Temperature Proton Exchange Membranes with Ultralow Volume Expansion and Reduced Phosphoric Acid Leakage

Phosphoric acid (PA) leakage and volume expansion are critical factors limiting long-term stable operation of PA-doped polybenzimidazole (PBI) for high-temperature proton exchange membrane fuel cells. Enhancing the interaction between the polymer matrix and PA provides an effective way to minimize PA loss and inhibit excessive membrane swelling. The covalent organic frameworks (COFs) are helpful in improving the performance of PA-PBI membranes due to the robust frameworks, adjustable structures, and good compatibility with polymers. Here, in this work, we synthesized porous COFs named TTA-DFP containing triazine rings and pyridine groups at room temperature for as short as 2 h without oxygen isolation. TTA-DFP was then blended with commercial poly[2,2'-(p-oxidiphenylene)-5,5'-benzimidazole] (OPBI) to prepare composite membranes. The abundant alkaline N sites in TTA-DFP exhibit strong interactions with PA and OPBI, which not only provide more proton transport pathways to promote proton conduction but also immobilize PA in acidophilic micropores to reduce PA leakage. The composite membranes exhibit a much lower volume swelling ratio than that of the OPBI membrane. The PA retention of the composite membrane after 120 h of treatment at 80 °C and 40% relative humidity can reach as high as 84.6%. Particularly, the proton conductivity of the composite membrane doped with 15 wt% TTA-DFP achieves 0.112 S cm-1 at 180 °C without humidification with a swelling ratio of 24.1%. In addition, it has an optimal peak power density of 824.4 mW cm-2 at 180 °C, which is 1.7 times that of the OPBI membrane. The stability of the composite membrane is much better than that of OPBI at a current density of 0.3 A cm-2 at 140 °C for 120 h.

High anhydrous proton conductivity and a smart proton transportation approach of a sulfate coordination polymer

We successfully synthesized a one-dimensional cobalt sulfate coordinating polymer, whose simple hydrogen bond web structure facilitated the analysis of the proton transfer process. At 175 °C, without humidity, the conductivity is 0.0311 S cm-1, which exceeds those of most of the organic inorganic hybrid materials under anhydrous conditions (world record rank 8). Based on its crystal structure and theoretical calculations, the subversive proton conduction pathway was inferred clearly. We, for the first time, found that the proton smartly chose the path with a lower energy barrier but not the one with short distance to transport avoiding short circuit.

Sulfonated Poly Ether Sulfone Membrane Reinforced with Bismuth-Based Organic and Inorganic Additives for Fuel Cells

This research work focuses on developing a robust polymer electrolyte membrane (PEM) with high proton efficiency toward proton exchange membrane fuel cells (PEMFCs). In this study, poly ether sulfone (PES) was sulfonated by chlorosulfonic acid to yield sulfonated poly ether sulfone (SPES) followed by incorporation with bismuth-based additives such as bismuth trimesic acid (BiTMA) and bismuth molybdenum oxide (Bi2MoO6). The composite membrane was thoroughly investigated for its structural and physicochemical properties such as FT-IR, SEM, TGA, contact angle, water uptake, oxidative stability, ion-exchange capacity, and swelling ratio. Incorporation of additives into the polymer was confirmed by XPS and XRD analysis. The proton conductance of the pristine SPES is 4.19 × 10-3 S cm-1, whereas that of the composite membrane SPES/BiTMA-10 is 10 × 10-3 S cm-1 and that of SPES/Bi2MoO6-15 is 7.314 × 10-3 S cm-1; both the composite membranes exhibit higher proton conductivity than the pristine SPES membrane. The physicochemical characteristics and impedance measurements of the electrolyte reported can be viable to the PEM membrane.

Enhanced performance of nanocomposite membrane developed on sulfonated poly (1, 4-phenylene ether-ether-sulfone) with zeolite imidazole frameworks for fuel cell application

Proton exchange membrane fuel cells (PEMFC) have received a lot of interest and use metal-organic frameworks (MOF)/polymer nanocomposite membranes. Zeolite imidazole framework-90 (ZIF-90) was employed as an addition in the sulfonated poly (1, 4-phenylene ether-ether-sulfone) (SPEES) matrix in order to investigate the proton conductivity in a novel nanocomposite membrane made of SPEES/ ZIF. The high porosity, free surface, and presence of the aldehyde group in the ZIF-90 nanostructure have a substantial impact on enhancing the mechanical, chemical, thermal, and proton conductivity capabilities of the SPEES/ZIF-90 nanocomposite membranes. The results indicate that the utilization of SPEES/ZIF-90 nanocomposite membranes with 3wt% ZIF-90 resulted in enhanced proton conductivity of up to 160 mS/cm at 90 °C and 98% relative humidity (RH). This is a significant improvement compared to the SPEES membrane which exhibited a proton conductivity of 55 mS/cm under the same conditions, indicating a 1.9-fold increase in performance. Furthermore, the SPEES/ZIF-90/3 membrane exhibited a remarkable 79% improvement in maximum power density, achieving a value of 0.52 W/cm² at 0.5 V and 98% RH, which is 79% higher than that of the pristine SPEES membrane.

Thermal-Response Proton Conduction in Schiff Base-Incorporated Metal-Organic Framework Hybrid Membranes under Low Humidity Based on the Excited-State Intramolecular Proton Transfer Mechanism

Stimulus-responsive proton conduction materials have attracted enormous interest as a new kind of "smart material". It is desirable to develop the appropriate stimulus signal and high proton-conducting materials with an excellent proton-conducting switch ratio (γ), but it remains a great challenge. Here, it can be found for the first time that 4-((2-hydroxybenzylidene)amino)benzenesulfonic acid (HBABSA) has obvious thermal isomerization when porous solids act as matrixes at the ambient temperatures, which is different from that in the crystalline state at 77 K. Therefore, we proposed a host-guest metal-organic framework (MOF) composite, namely, MOF-808 incorporated with HBABSA (HBABSA@MOF-808), which has a proton-conducting switch ratio (γ) of 16 between 338 and 343 K due to the thermally induced isomerization of HBABSA molecules in the MOF pores. The strong binding between the keto-type HBABSA and MOF at the relatively low temperatures can efficiently suppress the proton conduction, while the enol-type one provides more mobile protons for conduction at the high temperatures due to the excited-state intramolecular proton transfer mechanism. Further, the HBABSA@MOF-808 as a filler is blended into polyvinyl alcohol and poly(2-acrylamide-2-methyl-1-propane sulfonic acid) to form hybrid membranes. The hybrid membrane with the highest content of the MOF composite displays a high proton conductivity of 5.57 × 10-3 S·cm-1 under 353 K and 57% RH along with a good switch ratio of 5.4. The development of thermal-response proton-conducting MOF materials is opening up a unique pathway for remote control, thermal sensing, intelligent batteries, and other fields.

Recent advances in metal-based nanoporous materials for sensing environmentally-related biomolecules

Highly sensitive, stable, selective, efficient, and short reaction time sensors play a substantial role in daily life/industry and are the need of the day. Due to the rising environmental issues, nanoporous carbon and metal-based materials have attracted significant attention in environmental analysis owing to their intriguing and multifunctional properties and cost-effective and rapid detection of different analytes by sensing applications. Environmental-related issues such as pollution have been a significant threat to the world. Therefore, it is necessary to fabricate highly promising performance-based sensor materials with excellent reliability, selectivity and good sensitivity for monitoring various analytes. In this regard, different methods have been employed to fabricate these sensors comprising metal, metal oxides, metal oxide carbon composites and MOFs leading to the formation of nanoporous metal and carbon composites. These composites have exceptional properties such as large surface area, distinctive porosity, and high conductivity, making them promising candidates for several versatile sensing applications. This review covers recent advances and significant studies in the sensing field of various nanoporous metal and carbon composites. Key challenges and future opportunities in this exciting field are also part of this review.

Three layered cucurbit[6]uril-based metal-organic rotaxane networks functionalized by sulfonic groups for proton conduction

Three new cucurbit[6]uril (CB[6])-based metal-organic rotaxane networks (MORNs) (named CUST-711, CUST-712, and CUST-713) functionalized by a sulfonic group (-SO₃H) have been designed and synthesized via a hydrothermal method. All three compounds exhibited similar two-dimensional (2D) wave layer structures. Their stability under different temperature and relative humidity conditions has been investigated and all the compounds showed excellent stability. Furthermore, their proton conduction properties were also discussed in detail. Due to different structures and sulfonic group sites, the three compounds exhibited different proton conduction abilities of which CUST-712 exhibited an intrinsic relatively high proton conductivity (1.75 × 10^-4 S cm^-1 at 85 °C and 97% relative humidity). These results provide ideas for the design and synthesis of functional CB[6]-based metal-organic rotaxane frameworks (MORFs) as proton conducting materials.

A dual-function Cd-MOF with high proton conduction and excellent fluorescence detection of pyridine

Metal-organic frameworks have great potential in the field of proton conducting materials and fluorescent probes due to their structural tunability and designability. A novel water-stable metal organic framework material [Cd₂(Hdpb)(H₂O)₃] (Cd-MOF) was synthesized based on H₅dpb (H₅dpb = 3,5-diphosphonobenzoic acid) and Cd²⁺ ions. Cd²⁺ ions are connected with phosphonates and carboxyl groups of H₅dpb to form an infinitely extended 1D chain, which is further connected by the Hdpb^4- ligand and coordinated water to form a three-dimensional network structure. There are hydrogen bond networks in the 3D structure of the Cd-MOF, which are favorable for proton transfer, achieving its maximum proton conductivity of 2.97 × 10^-3 S cm^-1 at 338 K and 98% relative humidity (RH). To realize its application in fuel cells, the Cd-MOF was introduced into the chitosan (CS) matrix, and a series of composite membranes (Cd-MOF@CS-X) with high proton conductivity were obtained. The results of AC impedance show that the proton conductivity of Cd-MOF@CS-5 reaches 3.55 × 10^-1 S cm^-1 at 358 K and 98% RH, which is comparable to the highest values reported for MOF-polymer complexes. Moreover, the Cd-MOF can be used as a selective fluorescent probe for pyridine detection, and its detection limit can reach 1.0 × 10^-6 M. A bifunctional MOF with proton conduction and pyridine recognition is reported for the first time, and has important reference value for the practical application of functional MOFs in both electrochemical and luminescence sensing.

Fabrication of a polyoxotungstate/metal-organic framework/phosphorus-doped reduced graphene oxide nanohybrid modified glassy carbon electrode by electrochemical reduction and its electrochemical properties

Hybrid nanocomposites based on polyoxometalates (POMs), metal-organic frameworks (MOFs), and graphene oxide (GO) have a unique set of properties. They have specific properties such as high acidity, oxygen-rich surface, and good redox capability from POMs. In contrast, they do not have weaknesses of POMs such as a low surface area, and high solubility in aqueous media. Herein, a novel organic-inorganic nanohybrid compound based on H3PW12O40 (PW12), a Co-based MOF, and GO was prepared. The prepared hybrid nanocomposite (PW12/MOF/GO) was characterized using different techniques. Then, a PW12/MOF/GO nanocomposite modified glassy carbon electrode (GCE) was fabricated by the drop-casting method and next was dried at room temperature. Then, the PW12/MOF/GO/GCE was subjected to electrochemical reduction at a constant potential of -1.5 V, in 0.1 M H3PO4 solution containing 0.10% w/v PW12/MOF/GO additive. The morphology, electrochemical activity, and stability of the modified electrode (PW12/MOF/P@ERGO/GCE) were studied with FE-SEM coupled with EDS, CV, and amperometry. The obtained results confirmed that the PW12/MOF/P@ERGO/GCE could be effective in hydrogen evolution reaction (HER). The electrochemical activity of the PW12/MOF/P@ERGO/GCE due to the desirable microstructure of the electrocatalyst (e.g. high active surface area and homogeneous distribution of the PW12/MOF/P@ERGO), and also the synergistic effect of the blocks, is more than those of PW12/GCE, MOF/GCE, PW12/MOF/GCE, and P@ERGO/GCE. Moreover, the PW12/MOF/P@ERGO/GCE showed an excellent long-term stability under the air atmosphere.

Fabrication of a Cation-Exchange Membrane via the Blending of SPES/N-Phthaloyl Chitosan/MIL-101(Fe) Using Response Surface Methodology for Desalination

In the present work, a novel mixed matrix cation exchange membrane composed of sulfonated polyether sulfone (SPES), N-phthaloyl chitosan (NPHCs) and MIL-101(Fe) was synthesized using response surface methodology (RSM). The electrochemical and physical properties of the membrane, such as ion exchange capacity, water content, morphology, contact angle, fixed ion concentration and thermal stability were investigated. The RSM based on the Box-Behnken design (BBD) model was employed to simulate and evaluate the influence of preparation conditions on the properties of CEMs. The regression model was validated via the analysis of variance (ANOVA) which exhibited a high reliability and accuracy of the results. Moreover, the experimental data have a good fit and high reproducibility with the predicted results according to the regression analysis. The embedding of MIL-101(Fe) nanoparticles contributed to the improvement of ion selective separation by forming hydrogen bonds with the polymer network in the membrane. The optimum synthesis parameters such as degree of sulfonation (DS), the content of SPES and NPHCs and the content of MIL-101(Fe) were acquired to be 30%, 85:15 and 2%, respectively, and the corresponding desalination rate of the CEMs improved to 136% while the energy consumption reduced to 90%. These results revealed that the RSM was a promising strategy for optimizing the preparation factors of CEMs and other similar multi-response optimization studies.

Hybrid Nafion Membranes of Ionic Hydrogen-Bonded Organic Framework Materials for Proton Conduction and PEMFC Applications

As the high-power density and environmentally friendly energy resources, proton exchange membrane fuel cells (PEMFCs) have a promising future in portable power generation. Herein, the hybrid Nafion membranes of ionic hydrogen-bonded organic frameworks (iHOFs) for PEMFC applications are demonstrated. By adjusting the position of sulfonic groups on naphthalene disulfonic acid compounds, four iHOFs with different types of hydrogen bonds were synthesized successfully based on 1,1'-diamino-4,4'-bipyridylium and naphthalene disulfonic acid. The formation of hydrogen bond interactions between amino and sulfonate groups provides a rich hydrogen bond network, which makes such iHOFs have high conductivity, and the maximum value is 2.76 × 10^-3 S·cm^-1 at 100 °C and 98% RH. Besides, composite membrane materials were obtained by mixing Nafion and iHOFs, and the maximum proton conductivity values can achieve 1.13 × 10^-2 S·cm^-1 for 6%-iHOF-3/Nafion and 2.87 × 10^-3 S·cm^-1 for 6%-iHOF-4/Nafion membranes at 100 °C under 98% RH. Through the H₂/O₂ fuel cell performance test by using iHOF/Nafion as the solid electrolyte, the maximum power and current density values of hybrid membranes are 0.36 W·cm^-2 and 1.10 A·cm^-2 for 6%-iHOF-3/Nafion and 0.42 W·cm^-2 and 1.20 A·cm^-2 for 6%-iHOF-4/Nafion at 80 °C and 100% RH. This work provides a practicable approach for establishing high-performance proton exchange hybrid membranes by doping high proton-conducting iHOFs into the Nafion matrix.

Robust ionic liquid@MOF composite as a versatile superprotonic conductor

A highly performing proton conducting composite was prepared through the impregnation of EMIMCl ionic liquid in the mesoporous MIL-101(Cr)-SO₃H MOF. The resulting EMIMCl@MIL-101(Cr)-SO₃H composite displays high thermal and chemical stability, alongside retention of a high amount of EMIMCl even at temperatures as high as 500 K, as well as under moisture conditions. Remarkably, this composite exhibits outstanding proton conductivity not only at the anhydrous state (σ_{473 K} = 1.5 × 10^-3 S cm^-S) but also under humidity (σ_{(343 K/60%-80%RH)} ≥ 0.10 S cm^-1) conditions. This makes EMIMCl@MIL-101(Cr)-SO₃H a unique candidate to act as a solid state proton conductor for PEMFC applications under versatile conditions.

High Proton Conductivity of a Cadmium Metal-Organic Framework Constructed from Pyrazolecarboxylate and Its Hybrid Membrane

A new type of metal-organic framework, [Cd₂(pdc)(H₂O)(DMA)₂]_n (pdc = 3,5-pyrazoledicarboxylic acid; DMA = dimethylamine), named Cd-MOF, was synthesized and characterized. There are regular rectangular pore channels containing a large number of dimethylamine cations in the crystal structure. AC impedance test results show the proton conductivity of Cd-MOF reaches 1.15 × 10^-3 S cm^-1 at 363 K and 98% RH. In order for its application in fuel cells, the Cd-MOF was introduced into a sulfonated polyphenylene oxide matrix to prepare a hybrid membrane, and the proton conductivity of the hybrid membrane has a high value of 2.64 × 10^-1 S cm^-1 at 343 K and 98% RH, which is higher than those of most MOF polymer hybrid membranes. The proton conductivity of the hybrid membrane of the SPPO polymer still maintains a certain degree of stability in a wide temperature range. To the best of our knowledge, it is the first proton exchange membrane that combines pyrazolecarboxylate cadmium MOFs and an SPPO polymer with high proton conductivity and good stability. This research may help to further develop the application of MOFs in the field of proton exchange membrane fuel cells.

Control of Proton-Conductive Behavior with Nanoenvironment within Metal-Organic Materials

Solid-state proton-conductive materials have been of great interest for several decades due to their promising application as electrolytes in fuel cells and electrochemical devices. Metal-organic materials (MOMs) have recently been intensively investigated as a new type of proton-conductive materials. The highly crystalline nature and structural designability of MOMs make them advantageous over conventional noncrystalline proton-conductive materials-the detailed investigation of the structure-property relationship is feasible on MOM-based proton conductors. This review aims to summarize and examine the fundamental principles and various design strategies on proton-conductive MOMs, and shed light on the nanoconfinement effects as well as the importance of hydrophobicity on specific occasions, which have been often disregarded. Besides, challenges and future prospects on this field are presented.

Enhanced proton transport properties of sulfonated polyarylene ether nitrile (SPEN) with moniliform nanostructure UiO-66-NH2/CNT

Metal-organic frameworks (MOFs) have been widely investigated for their porosity and functional diversity. Inspired by the flexible designability of MOFs, UiO-66-NH2/CNT with moniliform nanostructure was designed and synthesized successfully. SPEN@UiO-66-NH2/CNT composite proton exchange membranes were prepared by loaded UiO-66-NH2/CNT into sulfonated polyarylene ether nitrile (SPEN). Due to the addition of UiO-66-NH2/CNT, all the properties of composite proton exchange membranes were improved. The composite membranes exhibit excellent thermal stability and dimensional stability. The tensile strength of the composite membranes was improved about twofold compared to that of recast SPEN membrane, which was contributed by the interlaced property and rigid structure of UiO-66-NH2/CNT. Especially, the proton conductivity of the composite membranes was greatly facilitated by the additional proton acceptors and donors provided by the abundant amino groups and carboxyl groups in UiO-66-NH2/CNT. Furthermore, the methanol permeability of SPEN@UiO-66-NH2/CNT reduced consistently (from 6.13 to 0.96 × 10−7 cm2 s−1), which was much lower than that of Nafion membrane (21.36 × 10−7 cm2 s−1). All the results suggest that the design of multifunctional nanofillers based on the skeleton structure of MOFs could provide a new strategy to enhance the performance of PEMs.

Influence of chemical composition on the proton conductivity of microporous organic polymers entrapped in nitrilotrimethylphosphonic acid

The construction of acid–base interactions is critical for developing proton-conducting COF materials with high loading and stable electrolytes, which is influenced by the chemical composition of conductors.

Metal Organic Frameworks Modified Proton Exchange Membranes for Fuel Cells

Proton exchange membrane fuel cells (PEMFCs) have received considerable interest due to their low operating temperature and high energy conversion rate. However, their practical implement suffers from significant performance challenge. In particular, proton exchange membrane (PEM) as the core component of PEMFCs, have shown a strong correlation between its properties (e.g., proton conductivity, dimensional stability) and the performance of fuel cells. Metal-organic frameworks (MOFs) as porous inorganic-organic hybrid materials have attracted extensive attention in gas storage, gas separation and reaction catalysis. Recently, the MOFs-modified PEMs have shown outstanding performance, which have great merit in commercial application. This manuscript presents an overview of the recent progress in the modification of PEMs with MOFs, with a special focus on the modification mechanism of MOFs on the properties of composite membranes. The characteristics of different types of MOFs in modified application were summarized.

Dual-Functional Proton-Conducting and pH-Sensing Polymer Membrane Benefiting from a Eu-MOF

Porous metal-organic frameworks (MOFs) have demonstrated a great potential in proton conduction and luminescence sensing due to functionalized nodes, ligands and channels, or pores. Herein, we prepared a hydrothermally stable Eu-MOF that also resisted acid and base using a bifunctional organic ligand containing carboxylic acid groups, which are easily coordinated to Eu ions, and Eu-phobic tetrazolyl groups as potential proton-hopping sites. The hydrogen bond network, which was constructed by the uncoordinated anionic tetrazolium and the coordinated and free water molecules, endowed this Eu-MOF with the highest proton conductivity of 4.45 × 10^-2 S/cm at 373 K and 93% relative humidity. The proton conductivity of the Nafion membrane containing this Eu-MOF increased 1.74 times. More interestingly, the hybrid membrane displayed luminescence pH sensing because the changeable protonation levels of uncoordinated tetrazolium groups along with the pH tuned the emission of embedded Eu-MOFs. Such a dual-functional MOF-based hybrid membrane including proton conduction and pH sensing is reported for the first time, which could open an avenue to the more practical application for functional MOFs.

Protonated state and synergistic role of Nd3+ doped barium cerate perovskite for the enhancement of ionic pathways in novel sulfonated polyethersulfone for H2/O2 fuel cells

In recent decades, there has been a need for novel advancement of sustainable non-fluorinated polymer electrolyte membranes for proton exchange membrane fuel cell (PEMFC) applications. The set forth strategy aims to ameliorate proton conduction of sulfonated polyethersulfone (SPES) polymer membranes with a distinct mixture of barium cerate (BCO) and neodymium-doped barium cerate (BCNO) perovskites developing cationic composite membranes (CCMs) prepared through a technique of solvent casting. The CCMs were subjected to analysis of their mechanical, structural, chemical compositional, thermal, morphological, oxidative, physicochemical, electrochemical and fuel cell polarization performance respectively. Acceptor doping of the trivalent neodymium group at the B site of BCO increases the number of oxygen vacancies and improves ionic conduction. The CCM of neodymium-doped barium cerate demonstrates a higher proton conductivity of 42.2 mS cm-1 with a lower activation energy of 6.80 kJ mol-1 at 80 °C. The maximum current density and power density with the OCV of 0.93 V for the neodymium-doped barium cerate membrane are 397 mA cm-2 and 117 mW cm-2, which is 1.8 times greater than that of the pure SPES membrane. On the basis of polarization performance, the SPES membrane with neodymium-doped barium cerate has great potential in highly-efficient PEMFC applications.

Metal-Organic Frameworks as a Versatile Platform for Proton Conductors

Metal-organic frameworks (MOFs) are an intriguing type of crystalline porous materials that can be readily built from metal ions or clusters and organic linkers. Recently, MOF materials, featuring high surface areas, rich structural tunability, and functional pore surfaces, which can accommodate a variety of guest molecules as proton carriers and to systemically regulate the proton concentration and mobility within the available space, have attracted tremendous attention for their roles as solid electrolytes in fuel cells. Recent advances in MOFs as a versatile platform for proton conduction in the field of humidity condition proton-conduction, anhydrous atmosphere proton-conduction, single-crystal proton-conduction, and including MOF-based membranes for fuel cells, are summarized and highlighted. Furthermore, the challenges, future trends, and prospects of MOF materials for solid electrolytes are also discussed.

Proton conductivity studies on five isostructural MOFs with different acidity induced by metal cations

Five isostructural MOFs display very different proton conductivities despite the same proton transfer pathway. This difference is caused by the different coordination ability between the metal cations and the ligand.

One-step introduction of terminal sulfonic groups into a proton-conducting metal–organic framework by concerted deprotonation–metalation–hydrolysis reaction

A one-step strategy for introducing terminal sulfonic groups from a hydrolysable precursor is demonstrated for a proton-conducting metal–organic framework.

Structural features of proton-conducting metal organic and covalent organic frameworks

Proton conductivity in MOFs and COFs have been attracted due to their applicability as electrolytes in proton exchange membrane fuel cells. A short overview with recent updates on the structural features of MOFs and COFs for proton conduction are presented here.