Layer-by-layer assembly of high negatively charged polycarbonate membranes with robust antifouling property for microalgae harvesting

Preventing biofouling in microalgal photobioreactors

Photobioreactors (PBRs) are used to grow the light-requiring microalgae in diverse commercial processes. Often, they are operated as continuous culture over months period. However, with time, biofouling layer develops on the inner surfaces of their walls. The fouling layer formation deteriorates the PBR performance as foulants reduce light penetration in it. Light is essential for photosynthetic cultures, and a deterioration in lighting adversely impacts algae growth and biomass productivity. Fouling requires a frequent shutdown to clean the PBR and add to the environmental impact of the operation by generating many wastewaters contaminated with the cleaning chemicals. Antibiofouling coatings could be used to modify the surfaces of existing and future PBRs. Therefore, transparent and non-toxic fouling-release coatings, produced using hydrogel technology, could transform the existing PBRs into efficient and enduring microalgae culture systems, requiring only the application of the coating to the inner walls, without additional investments in new PBRs.

Infiltration of freshwater food chain by nanoplastics: An examination of trophic transfer and biological impact

The contamination of freshwater by nanoplastics (NPs) poses a significant threat to various organisms. However, the influence of food factors on the NPs toxicity and the associated risks to water safety remains poorly understood. In this study, we employed highly fluorescent NPs incorporating aggregation-induced emission fluorogens to quantify and visualize the interactions of NPs with freshwater phytoplanktonic alga Chlamydomonas reinhardtii and zooplankton Daphnia magna, including the uptake of NPs by algae and daphnids, as well as gut environment responses through both waterborne and foodborne routes. NPs at environmentally relevant concentrations were capable of aggregating and internalizing in planktonic algae, thus permeating the food chain and potentially causing ecological risks. Notably, positively charged NPs exhibited greater infiltration than the negatively charged NPs. Our findings indicated that NPs had a greater tendency to accumulate in Daphnia via the food chain rather than through direct exposure to water. This was attributed to the loss of selectivity, suggesting a potential mechanism for NP accumulation in aquatic food chains. However, daphnids exposed to NPs through waterborne route exhibited more gut pH acidification, esterase activity, and gut inflammation compared to those exposed via the foodborne route. Moreover, chronic exposure to NPs through waterborne routes significantly disrupted the growth, molting, and reproduction of Daphnia compared to the foodborne group. These findings provided valuable insights into the complexities of plastic pollution on primary trophic levels in aquatic environments.

Nano-clay modified membranes: A promising green strategy for microalgal antifouling filtration

Membrane fouling is a major challenge which limits the sustainable application of membrane filtration-based microalgal harvesting at industrial level. Membrane fouling leads to increased operational and maintenance costs and represents a major obstacle to microalgal downstream processing. Nano-clays are promising naturally occurring nanoparticles in membrane fabrication due to their low-cost, facile preparation, and their superior properties in terms of surface hydrophilicity, mechanical stability, and resistance against chemicals. The membrane surface modification using nano-clays is a sustainable promising approach to improve membranes mechanical properties and their fouling resistance. However, the positive effects of nano-clay particles on membrane fouling are often limited by aggregation and poor adhesion to the base polymeric matrix. This review surveys the recent efforts to achieve anti-fouling behavior using membrane surface modification with nano-clay fillers. Further, strategies to achieve a better incorporation of nano-clay in the polymer matrix of the membrane are summarised, and the factors that govern the membrane fouling, stability, adhesion, agglomeration and leaching are discussed in depth.

Antiblood Cell Adhesion of Mussel-Inspired Chondroitin Sulfate- and Caffeic Acid-Modified Polycarbonate Membranes

We fabricated a mussel-inspired hemocompatible polycarbonate membrane (PC) modified by the cross-linking of chondroitin sulfate and caffeic acid polymer using CA-CS via a Schiff base and Michael addition reaction and named it CA-CS-PC. The as-fabricated CA-CS-PC membrane shows excellent hydrophilicity with a water contact angle of 0° and a negative surface charge with a zeta potential of -32 mV. The antiadhesion property of the CA-CS-modified PC membrane was investigated by enzyme-linked immunosorbent assay (ELISA), using human plasma protein fibrinogen adsorption studies, and proved to have excellent antiadhesion properties, because of the lower fibrinogen adsorption. In addition, the CA-CS-PC membrane also shows enhanced hemocompatibility. Finally, blood cell attachment tests of the CA-CS-PC membrane were observed by CLSM and SEM, and the obtained results proved that CA-CS-PC effectively resisted cell adhesion, such as platelets and leucocytes. Therefore, this work disclosed a new way to design a simple and versatile modification of the membrane surface by caffeic acid and chondroitin sulfate and apply it for cell adhesion.

Recent Advances in Micro-/Nanoplastic (MNPs) Removal by Microalgae and Possible Integrated Routes of Energy Recovery

Reliance on plastic has resulted in the widespread occurrence of micro-/nanoplastics (MNPs) in aquatic ecosystems, threatening the food web and whole ecosystem functions. There is a tight interaction between MNPs and microalgae, as dominant living organisms and fundamental constituents at the base of the aquatic food web. Therefore, it is crucial to better understand the mechanisms underlying the interactions between plastic particles and microalgae, as well as the role of microalgae in removing MNPs from aquatic ecosystems. In addition, finding a suitable route for further utilization of MNP-contaminated algal biomass is of great importance. The present review article provides an interdisciplinary approach to elucidate microalgae-MNP interactions and subsequent impacts on microalgal physiology. The degradation of plastic in the environment and differences between micro- and nanoplastics are discussed. The possible toxic effects of MNPs on microalgal growth, photosynthetic activity, and morphology, due to physical or chemical interactions, are evaluated. In addition, the potential role of MNPs in microalgae cultivation and/or harvesting, together with further safe routes for biomass utilization in biofuel production, are suggested. Overall, the current article represents a state-of-the-art overview of MNP generation and the consequences of their accumulation in the environment, providing new insights into microalgae integrated routes of plastic removal and bioenergy production.

Industry chain and challenges of microalgal food industry-a review

Currently, the whole world is facing hunger due to the increase in the global population and the rising level of food consumption. Unfortunately, the impact of environmental, climate, and political issues on agriculture has resulted in limited global food resources. Thus, it is important to develop new food sources that are environmentally friendly and not subject to climate or space limitations. Microalgae represent a potential source of nutrients and bioactive components for a wide range of high-value products. Advances in cultivation and genetic engineering techniques provide prospective approaches to widen their application for food. However, there are currently problems in the microalgae food industry in terms of assessing nutritional value, selecting processes for microalgae culture, obtaining suitable commercial strains of microalgae, etc. Additionally, the limitations of real data of market opportunities for microalgae make it difficult to assess their actual potential and to develop a better industrial chain. This review addresses the current status of the microalgae food industry, the process of commercializing microalgae food and breeding methods. Current research progress in addressing the limitations of microalgae industrialization and future prospects for developing microalgae food products are discussed.

A green, hybrid cleaning strategy for the mitigation of biofouling deposition in the elevated salinity forward osmosis membrane bioreactor (FOMBR) operation

Forward osmosis membrane bioreactors (FOMBRs) are currently gaining attention from the wastewater treatment industry, for their potential to produce high effluent quality and a relatively better flux stability against fouling. However, only using physical cleaning methods is not sufficient to recover the water flux performance satisfactorily under a long-term operation. This study comprehensively investigated the efficiency of a hybrid, environmentally-friendly cleaning strategy involving a combination of physical and free nitrous acid (FNA) cleanings under a long-term FOMBR operation. During 92 days of FOMBR operation, physical cleaning recovered the water flux by 85%, whilst FNA cleaning contributed to an additional 5% of the recovery. In addition, FNA cleaning also offered a retardation of fouling deposition by maintaining the water flux 18-30% more than that obtained by only the physical cleaning. A possible mechanism for FNA's role as the cleaning reagent was proposed for the first time in this study based on the water flux performance and membrane autopsy analysis. The results showed FNA cleaning broke down the residual fouling layer, preferencing protein-based substances. A lower ratio of protein to polysaccharides of the residual fouling layer contributed to a more negatively charged membrane surface (- 42.34 ± 0.30 mV) compared to the virgin one (- 17.54 ± 0.81 mV). This resulted in a stronger electrostatic repulsion between the foulants and the membrane surface, and thus slowed down the biofouling deposition process. This study suggested FNA solution has the great potential not only to recover the membrane performance, also as a strategy to slow down fouling deposition.

Effects of nanoplastics on microalgae and their trophic transfer along the food chain: recent advances and perspectives

Nanoplastics (NPs) have drawn increasing attention in recent years due to their potential threats to aquatic ecosystems. Microalgae are primary producers, which play important roles in the normal functioning of ecosystems. According to the source of production and laboratory experiments, both NPs and microalgae are likely to be widely found in various water environments, so they have a great chance of interacting with each other. Although tremendous efforts have been made to explore these potential interactions, a timely and critical review is still missing. In this paper, the effects of NPs on microalgae and their trophic transfer along the food chain are summarized. The toxic impact of NPs on microalgae is tightly associated with the concentrations, sizes and surface charge of NPs, as well as the microalgal species. In addition, NPs could also interact with many other contaminants, thus leading to combined effects on microalgae. NP exposure might block substance and energy exchange between microalgae and their surrounding environment, lead to a shading effect on microalgae, promote the production of reactive oxygen species (ROS) or induce direct physical damage on microalgae, thereby inhibiting the growth of microalgae. Moreover, NPs could also be trophically transferred along the food chain through microalgae and subsequently affect the species at a higher trophic level. Yet importantly, current understanding of the interactions between NPs and microalgae is still quite limited, and needs to be further studied.

Roadmap to sustainable carbon-neutral energy and environment: can we cross the barrier of biomass productivity?

The total number of inhabitants on the Earth is estimated to cross a record number of 9 × 10³ million by 2050 that present a unique challenge to provide energy and clean environment to every individual. The growth in population results in a change of land use, and greenhouse gas emission due to increased industrialization and transportation. Energy consumption affects the quality of the environment by adding carbon dioxide and other pollutants to the atmosphere. This leads to oceanic acidification and other environmental fluctuations due to global climate change. Concurrently, speedy utilization of known conventional fuel reservoirs causes a challenge to a sustainable supply of energy. Therefore, an alternate energy resource is required that can maintain the sustainability of energy and environment. Among different alternatives, energy production from high carbon dioxide capturing photosynthetic aquatic microbes is an emerging technology to clean environment and produce carbon-neutral energy from their hydrocarbon-rich biomass. However, economical challenges due to low biomass production still prevent the commercialization of bioenergy. In this work, we review the impact of fossil fuels burning, which is predominantly used to fulfill global energy demand, on the quality of the environment. We also assess the status of biofuel production and utilization and discuss its potential to clean the environment. The complications associated with biofuel manufacturing using photosynthetic microorganisms are discussed and directed evolution for targeted phenotypes and targeted delivery of nutrients are proposed as potential strategies to increase the biomass production.

Membrane-Based Harvesting Processes for Microalgae and Their Valuable-Related Molecules: A Review

The interest in microalgae production deals with its role as the third generation of feedstock to recover renewable energy. Today, there is a need to analyze the ultimate research and advances in recovering the microalgae biomass from the culture medium. Therefore, this review brings the current research developments (over the last three years) in the field of harvesting microalgae using membrane-based technologies (including microfiltration, ultrafiltration and forward osmosis). Initially, the principles of membrane technologies are given to outline the main parameters influencing their operation. The main strategies adopted by the research community for the harvesting of microalgae using membranes are subsequently addressed, paying particular attention to the novel achievements made for improving filtration performance and alleviating fouling. Moreover, this contribution also gives an overview of the advantages of applying membrane technologies for the efficient extraction of the high added-value compounds in microalgae cells, such as lipids, proteins and carbohydrates, which together with the production of renewable biofuels could boost the development of more sustainable and cost-effective microalgae biorefineries.

Biorenewable, transparent, and oxygen/moisture barrier nanocellulose/nanochitin-based coating on polypropylene for food packaging applications

Aluminum-coated polypropylene films are commonly used in food packaging because aluminum is a great gas barrier. However, recycling these films is not economically feasible. In addition, their end-of-life incineration generates harmful alumina-based particulate matter. In this study, coating layers with excellent gas-barrier properties are assembled on polypropylene films through layer-by-layer (LbL) deposition of biorenewable nanocellulose and nanochitin. The coating layers significantly reduce the transmission of oxygen and water vapors, two unfavorable gases for food packaging, through polypropylene films. The oxygen transmission rate of a 60 μm-thick, 20 LbL-coated polypropylene film decreases by approximately a hundredfold, from 1118 to 13.10 cc m^-2 day^-1 owing to the high crystallinity of nanocellulose and nanochitin. Its water vapor transmission rate slightly reduces from 2.43 to 2.13 g m^-2 day^-1. Furthermore, the coated film is highly transparent, unfavorable to bacterial adhesion and thermally recyclable, thus promising for advanced food packaging applications.

Combining patterned membrane filtration and flocculation for economical microalgae harvesting

Membranes have a lot of potential for harvesting microalgae, but mainly membrane fouling and high harvesting costs linked to low fluxes are hampering their breakthrough. Patterned membranes can reduce fouling by enchancing local turbulences close to the membrane surface on one hand, and by increasing the active area per m² of installed membrane on the other. Flocculation can further increase membrane permeance by increasing microalgal partical size and reducing the fraction of free organic matter in the feed. In current study, the effect of polyethylene glycol (PEG) in the casting solution of patterned polysulfone membranes was investigated to better tune the performance of the patterned membranes, together with the effects of cross-flow velocity and chitosan dosage on membrane fouling. The energy consumption and total harvesting cost, extrapolated to a full-scale microalgal harvesting, were then estimated. The patterned membrane prepared with a 28w% PEG concentration showed the highest clean water permeance (900±22 L/m² h bar) and membrane permeance in a microalgal suspension (590±17 L/m² h bar). Patterned membranes showed a lower filtration resistance (15% permeance decline at the end of filtration) than flat membranes (72%) at a cross-flow velocity of 0.0025 m/s. Increasing cross-flow velocity could increase membrane permeance in most cases. The highest stable membrane permeance (110±17 L/m² h bar) and the lowest filtration resistance were achieved when combining patterned membrane filtration with flocculation at optimized chitosan dosage. A very low energy consumption (0.28 kWh/kg) and harvesting cost (0.16 €/kg) were achieved under these conditions.

Fabrication of a Dual-Action Membrane with Both Antibacterial and Anticoagulant Properties via Cationic Polyelectrolyte-Induced Phase Separation

The development of microorganisms and formation of thrombus on a biomaterial surface can seriously lead to device failure and threaten human health. Nonetheless, a surface that has both antibacterial and anticoagulant properties has scarcely been developed. Herein, a novel dual-action membrane composed of polyethersulfone (PES) bulk material and a hydrophilic anionic poly-2-acrylamido-2-methylpropanesulfonic acid (PAMPS) polymer has been prepared via the cationic antibacterial agent poly(hexamethylene biguanide) (PHMB)-induced phase separation technique. Interestingly, the resultant membrane can offer tunable antibacterial and anticoagulant properties, while maintaining satisfactory permeability and greatly increasing selectivity. The membrane also shows excellent hydrophilicity, a well-defined porous surface, and cross section with a sponge gradient structure. Furthermore, the PHMB-PAMPS complex formed on the membrane surface displays outstanding long-term stability, which is crucial for further practical applications. More importantly, the hollow fiber membrane fabricated by the cationic polyelectrolyte-induced phase separation technique confirms its capability to control the membrane permeability (257.4 L·m^-2·h^-1·bar^-1) and selectivity (95.9%) without destroying the membrane structure. The present work opens a straightforward and efficient avenue for the rational design of a functional surface to fight biomedical material-associated infections.

A solar photo-thermochemical hybrid system using peroxydisulfate for organic matters removal and improving ultrafiltration membrane performance in surface water treatment

Solar energy is considered one of the most promising energy sources for the degradation of pollutants in the water treatments. An innovative solar photo-thermochemical system involving peroxydisulfate (PDS) as an oxidant and xenon lamp as a solar irradiation light source was applied with hopes to degrade organic matters and alleviate the ultrafiltration (UF) membrane fouling when treating the real surface water. Moreover, heat-activated PDS pretreatment was used as a comparison to explore the respective proportions of solar light and heating effects, finding that solar light effect dominated the activation of PDS to degrade natural organic matters (NOMs) when the reaction temperature was below 50 °C and they both contributed to the production of free radicals at the temperature of >50 °C. The results indicated that solar-activated PDS pretreatment significantly alleviated membrane fouling caused by Songhua River water with the highest transmembrane pressure (TMP) reduction of approximately 69.6% at 70 °C. Organic substances (characterized by DOC, UV₂₅₄ and the maximum florescent intensity) and micropollutant (atrazine) in the feed water were better degraded in the presence of solar light. Both total fouling index (TFI) and hydraulic irreversible fouling index (HIFI) were moderate correlated with the UV₂₅₄ and DOC, whereas remarkably correlated with the F_max of component 2 (C2) and component 3 (C3). In addition, no significant correlation was observed between fouling indexes (TFI and HIFI) and the F_max of component 1 (C1). The membrane irreversible fouling was attributed to the accumulation of cake layers mainly composed of protein-like substances on the membrane surface. Solar-activated PDS pretreatment would efficiently degrade the protein-like substances and terrestrially derived humic-like matters to control UF membrane fouling. The findings are beneficial to develop new strategies for membrane fouling alleviation based on the solar irradiation and PDS oxidation.

Harvesting microalgal biomass using negatively charged polysulfone patterned membranes: Influence of pattern shapes and mechanism of fouling mitigation

Membranes have a lot of potential for harvesting microalgae, but membrane fouling is hampering their breakthrough. In this study, the effects of charge and corrugated surface on membrane filtration performance were investigated. The clean water permeance (CWP), the microalgae harvesting efficiency and the membrane flux for a microalgal broth were determined using patterned polysulfone (PSf) membranes with different shapes of the surface patterns and containing different charge densities by blending sulfonated polysulfone (sPSf). The flow behavior near the patterned membrane surface, as well as the interaction energy between membrane and microalgae were investigated using computational fluid dynamics (CFD) simulation and the improved extended "Derjaguin, Landau, Verwey, Overbeek" (XDLVO) theory, respectively. Membrane charge and pattern shape significantly improve the membrane performance. The critical pressures of all sPSf blend patterned membranes were higher than 2.5 bar. A 4.5w% sPSf blend patterned membranes with wave patterns showed the highest CWP (2300 L/m² h bar) and membrane flux in the microalgal broth (1000 L/m² h bar) with 100% harvesting efficiency. XDLVO analysis showed that sPSf blend patterned membranes prepared obtained the lowest interaction energy and highest energy barrier for microalgal attachment. CFD simulation showed a higher velocity and wall shear on the pattern apexes.