1
|
Sengupta S, Tubio CR, Pinto RS, Barbosa J, Silva MM, Gonçalves R, Kundu M, Lanceros-Mendez S, Costa CM. Ternary composites of poly(vinylidene fluoride-co-hexafluoropropylene) with silver nanowires and titanium dioxide nanoparticles as separator membranes for lithium-ion batteries. J Colloid Interface Sci 2024; 668:25-36. [PMID: 38669993 DOI: 10.1016/j.jcis.2024.04.149] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/14/2024] [Revised: 04/12/2024] [Accepted: 04/21/2024] [Indexed: 04/28/2024]
Abstract
In the realm of polymer composites, there is growing interest in the use of more than one filler for achieving multifunctional properties. In this work, a composite separator membrane has been developed for lithium-ion battery application, by incorporating conductive silver nanowires (AgNWs) and titanium dioxide (TiO2) nanoparticles into a poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) polymer matrix. The composite membranes were manufactured by solvent casting and thermally induced phase separation, with total filler content varying up to 10 wt%. The ternary composites composites present improved mechanical characteristics, ionic conductivity and lithium transfer number compared to the neat polymer matrix. On the other hand, the filler type and content within the composite has little bearing on the morphology, polymer phase, or thermal stability. Once applied as a separator in lithium-ion batteries, the highest discharge capacity value was obtained for the 5 wt% AgNWs/5 wt% TiO2/PVDF-HFP membrane at different C-rates, benefiting from the synergetic effect from both fillers. This work demonstrates that higher battery performance can be achieved for next-generation lithium-ion batteries by using separator membranes based on ternary composites.
Collapse
Affiliation(s)
- S Sengupta
- Electrochemial Energy Storage Laboratory, Department of Chemistry, SRM Institute of Science and Technology, Chennai, India
| | - C R Tubio
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
| | - R S Pinto
- Centre of Chemistry, University of Minho, 4710-057 Braga, Portugal; Centre of Physics Universities of Minho and Porto, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal
| | - J Barbosa
- Centre of Chemistry, University of Minho, 4710-057 Braga, Portugal
| | - M M Silva
- Centre of Chemistry, University of Minho, 4710-057 Braga, Portugal
| | - R Gonçalves
- Centre of Chemistry, University of Minho, 4710-057 Braga, Portugal
| | - M Kundu
- Electrochemial Energy Storage Laboratory, Department of Chemistry, SRM Institute of Science and Technology, Chennai, India; International Iberian Nanotechnology Laboratory (INL), Av. Mestre Jose Veiga, 4715-330 Braga, Portugal.
| | - S Lanceros-Mendez
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain; Centre of Physics Universities of Minho and Porto, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal; Laboratory of Physics for Materials and Emergent Technologies, LapMET, University of Minho, Braga 4710-057, Portugal; Ikerbasque, Basque Foundation for Science, 48009 Bilbao, Spain
| | - C M Costa
- Centre of Physics Universities of Minho and Porto, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal; Laboratory of Physics for Materials and Emergent Technologies, LapMET, University of Minho, Braga 4710-057, Portugal; Institute of Science and Innovation for Bio-Sustainability (IB-S), University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal.
| |
Collapse
|
2
|
De Giorgio G, Matera B, Vurro D, Manfredi E, Galstyan V, Tarabella G, Ghezzi B, D'Angelo P. Silk Fibroin Materials: Biomedical Applications and Perspectives. Bioengineering (Basel) 2024; 11:167. [PMID: 38391652 PMCID: PMC10886036 DOI: 10.3390/bioengineering11020167] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Revised: 01/13/2024] [Accepted: 02/05/2024] [Indexed: 02/24/2024] Open
Abstract
The golden rule in tissue engineering is the creation of a synthetic device that simulates the native tissue, thus leading to the proper restoration of its anatomical and functional integrity, avoiding the limitations related to approaches based on autografts and allografts. The emergence of synthetic biocompatible materials has led to the production of innovative scaffolds that, if combined with cells and/or bioactive molecules, can improve tissue regeneration. In the last decade, silk fibroin (SF) has gained attention as a promising biomaterial in regenerative medicine due to its enhanced bio/cytocompatibility, chemical stability, and mechanical properties. Moreover, the possibility to produce advanced medical tools such as films, fibers, hydrogels, 3D porous scaffolds, non-woven scaffolds, particles or composite materials from a raw aqueous solution emphasizes the versatility of SF. Such devices are capable of meeting the most diverse tissue needs; hence, they represent an innovative clinical solution for the treatment of bone/cartilage, the cardiovascular system, neural, skin, and pancreatic tissue regeneration, as well as for many other biomedical applications. The present narrative review encompasses topics such as (i) the most interesting features of SF-based biomaterials, bare SF's biological nature and structural features, and comprehending the related chemo-physical properties and techniques used to produce the desired formulations of SF; (ii) the different applications of SF-based biomaterials and their related composite structures, discussing their biocompatibility and effectiveness in the medical field. Particularly, applications in regenerative medicine are also analyzed herein to highlight the different therapeutic strategies applied to various body sectors.
Collapse
Affiliation(s)
- Giuseppe De Giorgio
- IMEM-CNR, Institute of Materials for Electronics and Magnetism-National Research Council, Parco Area delle Scienze 37/A, 43124 Parma, Italy
| | - Biagio Matera
- Center of Dental Medicine, Department of Medicine and Surgery, University of Parma, Via Gramsci 14/A, 43126 Parma, Italy
| | - Davide Vurro
- IMEM-CNR, Institute of Materials for Electronics and Magnetism-National Research Council, Parco Area delle Scienze 37/A, 43124 Parma, Italy
| | - Edoardo Manfredi
- Center of Dental Medicine, Department of Medicine and Surgery, University of Parma, Via Gramsci 14/A, 43126 Parma, Italy
| | - Vardan Galstyan
- IMEM-CNR, Institute of Materials for Electronics and Magnetism-National Research Council, Parco Area delle Scienze 37/A, 43124 Parma, Italy
- Department of Engineering "Enzo Ferrari", University of Modena and Reggio Emilia, Via Vivarelli 10, 41125 Modena, Italy
| | - Giuseppe Tarabella
- IMEM-CNR, Institute of Materials for Electronics and Magnetism-National Research Council, Parco Area delle Scienze 37/A, 43124 Parma, Italy
| | - Benedetta Ghezzi
- IMEM-CNR, Institute of Materials for Electronics and Magnetism-National Research Council, Parco Area delle Scienze 37/A, 43124 Parma, Italy
- Center of Dental Medicine, Department of Medicine and Surgery, University of Parma, Via Gramsci 14/A, 43126 Parma, Italy
| | - Pasquale D'Angelo
- IMEM-CNR, Institute of Materials for Electronics and Magnetism-National Research Council, Parco Area delle Scienze 37/A, 43124 Parma, Italy
| |
Collapse
|
3
|
Li L, Duan Y. Engineering Polymer-Based Porous Membrane for Sustainable Lithium-Ion Battery Separators. Polymers (Basel) 2023; 15:3690. [PMID: 37765543 PMCID: PMC10534950 DOI: 10.3390/polym15183690] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2023] [Revised: 09/03/2023] [Accepted: 09/04/2023] [Indexed: 09/29/2023] Open
Abstract
Due to the growing demand for eco-friendly products, lithium-ion batteries (LIBs) have gained widespread attention as an energy storage solution. With the global demand for clean and sustainable energy, the social, economic, and environmental significance of LIBs is becoming more widely recognized. LIBs are composed of cathode and anode electrodes, electrolytes, and separators. Notably, the separator, a pivotal and indispensable component in LIBs that primarily consists of a porous membrane material, warrants significant research attention. Researchers have thus endeavored to develop innovative systems that enhance separator performance, fortify security measures, and address prevailing limitations. Herein, this review aims to furnish researchers with comprehensive content on battery separator membranes, encompassing performance requirements, functional parameters, manufacturing protocols, scientific progress, and overall performance evaluations. Specifically, it investigates the latest breakthroughs in porous membrane design, fabrication, modification, and optimization that employ various commonly used or emerging polymeric materials. Furthermore, the article offers insights into the future trajectory of polymer-based composite membranes for LIB applications and prospective challenges awaiting scientific exploration. The robust and durable membranes developed have shown superior efficacy across diverse applications. Consequently, these proposed concepts pave the way for a circular economy that curtails waste materials, lowers process costs, and mitigates the environmental footprint.
Collapse
Affiliation(s)
- Lei Li
- SINOPEC Nanjing Research Institute of Chemical Industry Co., Ltd., Nanjing 210048, China
| | - Yutian Duan
- SINOPEC Nanjing Research Institute of Chemical Industry Co., Ltd., Nanjing 210048, China
- College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
| |
Collapse
|
4
|
Durán-Rey D, Brito-Pereira R, Ribeiro C, Ribeiro S, Sánchez-Margallo JA, Crisóstomo V, Irastorza I, Silván U, Lanceros-Méndez S, Sánchez-Margallo FM. Development of Silk Fibroin Scaffolds for Vascular Repair. Biomacromolecules 2023; 24:1121-1130. [PMID: 36754364 PMCID: PMC10016106 DOI: 10.1021/acs.biomac.2c01124] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/16/2022] [Revised: 01/05/2023] [Indexed: 02/10/2023]
Abstract
Silk fibroin (SF) is a biocompatible natural protein with excellent mechanical characteristics. SF-based biomaterials can be structured using a number of techniques, allowing the tuning of materials for specific biomedical applications. In this study, SF films, porous membranes, and electrospun membranes were produced using solvent-casting, salt-leaching, and electrospinning methodologies, respectively. SF-based materials were subjected to physicochemical and biological characterizations to determine their suitability for tissue regeneration applications. Mechanical analysis showed stress-strain curves of brittle materials in films and porous membranes, while electrospun membranes featured stress-strain curves typical of ductile materials. All samples showed similar chemical composition, melting transition, hydrophobic behavior, and low cytotoxicity levels, regardless of their architecture. Finally, all of the SF-based materials promote the proliferation of human umbilical vein endothelial cells (HUVECs). These findings demonstrate the different relationship between HUVEC behavior and the SF sample's topography, which can be taken advantage of for the design of vascular implants.
Collapse
Affiliation(s)
- David Durán-Rey
- Jesús
Usón Minimally Invasive Surgery Centre, Cáceres 10004, Spain
| | - Ricardo Brito-Pereira
- CMEMS-UMinho, University of Minho, 4800-058 Guimarães, Portugal
- LABBELS-Associate
Laboratory, 4710-057 Braga/Guimarães, Portugal
- CF−UM-UP−Physics
Centre of Minho and Porto Universities and LaPMET−Laboratory
of Physics for Materials and Emergent Technologies, University of Minho, 4710-057 Braga, Portugal
- IB-S,
Institute of Science and Innovation for Bio-Sustainability, Universidade do Minho, Campus de Gualtar, 4710-057 Braga, Portugal
| | - Clarisse Ribeiro
- CF−UM-UP−Physics
Centre of Minho and Porto Universities and LaPMET−Laboratory
of Physics for Materials and Emergent Technologies, University of Minho, 4710-057 Braga, Portugal
| | - Sylvie Ribeiro
- CF−UM-UP−Physics
Centre of Minho and Porto Universities and LaPMET−Laboratory
of Physics for Materials and Emergent Technologies, University of Minho, 4710-057 Braga, Portugal
| | - Juan A. Sánchez-Margallo
- Jesús
Usón Minimally Invasive Surgery Centre, Cáceres 10004, Spain
- RICORS-TERAV
Network, Instituto de Salud Carlos III, Madrid 28029, Spain
| | - Verónica Crisóstomo
- Jesús
Usón Minimally Invasive Surgery Centre, Cáceres 10004, Spain
- Centro
de
Investigación Biomédica en Red de Enfermedades Cardiovasculares
(CIBERCV), Instituto de Salud Carlos III, Madrid 28029, Spain
- RICORS-TERAV
Network, Instituto de Salud Carlos III, Madrid 28029, Spain
| | - Igor Irastorza
- CF−UM-UP−Physics
Centre of Minho and Porto Universities and LaPMET−Laboratory
of Physics for Materials and Emergent Technologies, University of Minho, 4710-057 Braga, Portugal
- Cell
Biology and Histology Department, Faculty
of Medicine, Leioa 48940, Spain
| | - Unai Silván
- BCMaterials,
Basque Center for Materials, Applications
and Nanostructures, UPV/EHU
Science Park, Leioa 48940, Spain
- Ikerbasque,
Basque Foundation for Science, Bilbao 48009, Spain
| | - Senentxu Lanceros-Méndez
- CF−UM-UP−Physics
Centre of Minho and Porto Universities and LaPMET−Laboratory
of Physics for Materials and Emergent Technologies, University of Minho, 4710-057 Braga, Portugal
- BCMaterials,
Basque Center for Materials, Applications
and Nanostructures, UPV/EHU
Science Park, Leioa 48940, Spain
- Ikerbasque,
Basque Foundation for Science, Bilbao 48009, Spain
| | - Francisco M. Sánchez-Margallo
- Jesús
Usón Minimally Invasive Surgery Centre, Cáceres 10004, Spain
- Centro
de
Investigación Biomédica en Red de Enfermedades Cardiovasculares
(CIBERCV), Instituto de Salud Carlos III, Madrid 28029, Spain
- RICORS-TERAV
Network, Instituto de Salud Carlos III, Madrid 28029, Spain
| |
Collapse
|
5
|
Barbosa J, Gonçalves R, Costa CM, Lanceros-Méndez S. Toward Sustainable Solid Polymer Electrolytes for Lithium-Ion Batteries. ACS OMEGA 2022; 7:14457-14464. [PMID: 35572743 PMCID: PMC9089680 DOI: 10.1021/acsomega.2c01926] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2022] [Accepted: 04/14/2022] [Indexed: 05/05/2023]
Abstract
Lithium-ion batteries (LIBs) are the most widely used energy storage system because of their high energy density and power, robustness, and reversibility, but they typically include an electrolyte solution composed of flammable organic solvents, leading to safety risks and reliability concerns for high-energy-density batteries. A step forward in Li-ion technology is the development of solid-state batteries suitable in terms of energy density and safety for the next generation of smart, safe, and high-performance batteries. Solid-state batteries can be developed on the basis of a solid polymer electrolyte (SPE) that may rely on natural polymers in order to replace synthetic ones, thereby taking into account environmental concerns. This work provides a perspective on current state-of-the-art sustainable SPEs for lithium-ion batteries. The recent developments are presented with a focus on natural polymers and their relevant properties in the context of battery applications. In addition, the ionic conductivity values and battery performance of natural polymer-based SPEs are reported, and it is shown that sustainable SPEs can become essential components of a next generation of high-performance solid-state batteries synergistically focused on performance, sustainability, and circular economy considerations.
Collapse
Affiliation(s)
- João
C. Barbosa
- Physics
Centre of Minho and Porto Universities (CF-UM-UP), University of Minho, 4710-057 Braga, Portugal
- Laboratory
of Physics for Materials and Emergent Technologies, LapMET, University of Minho, 4710-053 Braga, Portugal
| | - Renato Gonçalves
- Center
of Chemistry, University of Minho, 4710-057 Braga, Portugal
| | - Carlos M. Costa
- Physics
Centre of Minho and Porto Universities (CF-UM-UP), University of Minho, 4710-057 Braga, Portugal
- Laboratory
of Physics for Materials and Emergent Technologies, LapMET, University of Minho, 4710-053 Braga, Portugal
- Institute
of Science and Innovation for Bio-Sustainability (IB-S), University of Minho, 4710-057 Braga, Portugal
| | - Senentxu Lanceros-Méndez
- BCMaterials,
Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
- IKERBASQUE, Basque Foundation for Science, 48009 Bilbao, Spain
| |
Collapse
|
6
|
Silk fibroin and sericin polymer blends for sustainable battery separators. J Colloid Interface Sci 2021; 611:366-376. [PMID: 34959010 DOI: 10.1016/j.jcis.2021.12.067] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2021] [Revised: 11/22/2021] [Accepted: 12/10/2021] [Indexed: 12/15/2022]
Abstract
Natural polymers are a promising alternative for reducing the environmental impact of batteries. For this reason, it is still necessary to study their behavior and implement its use in these devices, especially in separator membranes. This work reports on new separator membranes based on silk fibroin (SF) and silk sericin (SS) prepared by salt leaching method. The effect of the different SS relative content on the physiochemical properties of the membranes and on the electrochemical performance of the corresponding batteries with lithium iron phosphate (LFP) as cathodes has been reported. It is observed that the increasing of SS content leads to a decrease of the overall crystallinity of the membranes. All SF/SS membranes presented a well-defined porosity above 75% with a uniform distribution of interconnected micropores. The electrolyte uptake and the ionic conductivity are dependent on the relative SS content. The addition of 10 wt% of SS into SF membranes, induce a high ionic conductivity of 4.09 mS.cm-1 and high lithium transference number (0.52), due to the improvement of the Li+ ions conduction paths within the blended structure. Charge/discharge tests performed in Lithium/C-LFP half-cells reveal a discharge capacity of 85 mAh.g-1 at 2C after 100 cycles for batteries with a SF/SS separator, containing a 10 wt% of SS, which suggests a stabilizing effect of Sericin on discharge capacity. Further, a 50% and 35% of capacity of retention and capacity fade, respectively, is observed. The presented SF/SS membrane show high electrochemical stability, being suitable for implementation in a next generation of sustainable battery systems. This could allow the SS valorization considering that 150,000 tons of SS are abandoned each year, reducing the contamination of environmental effluents.
Collapse
|
7
|
Abstract
Environmental issues related to energy consumption are mainly associated with the strong dependence on fossil fuels. To solve these issues, renewable energy sources systems have been developed as well as advanced energy storage systems. Batteries are the main storage system related to mobility, and they are applied in devices such as laptops, cell phones, and electric vehicles. Lithium-ion batteries (LIBs) are the most used battery system based on their high specific capacity, long cycle life, and no memory effects. This rapidly evolving field urges for a systematic comparative compilation of the most recent developments on battery technology in order to keep up with the growing number of materials, strategies, and battery performance data, allowing the design of future developments in the field. Thus, this review focuses on the different materials recently developed for the different battery components—anode, cathode, and separator/electrolyte—in order to further improve LIB systems. Moreover, solid polymer electrolytes (SPE) for LIBs are also highlighted. Together with the study of new advanced materials, materials modification by doping or synthesis, the combination of different materials, fillers addition, size manipulation, or the use of high ionic conductor materials are also presented as effective methods to enhance the electrochemical properties of LIBs. Finally, it is also shown that the development of advanced materials is not only focused on improving efficiency but also on the application of more environmentally friendly materials.
Collapse
|
8
|
Mendes-Felipe C, Salado M, Fernandes LC, Correia DM, Ruiz-Rubio L, Tariq M, Esperança J, Vilas-Vilela J, Lanceros-Mendez S. Photocurable temperature activated humidity hybrid sensing materials for multifunctional coatings. POLYMER 2021. [DOI: 10.1016/j.polymer.2021.123635] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
9
|
Wang HY, Zhang YQ, Wei ZG. Dissolution and processing of silk fibroin for materials science. Crit Rev Biotechnol 2021; 41:406-424. [PMID: 33749463 DOI: 10.1080/07388551.2020.1853030] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
Abstract
In recent decades, silk fibroin (SF) from silkworm Bombyx mori has been extensively researched and applied in several fields, including: cosmetics, biomedicine and biomaterials. The dissolution and regeneration of SF fibers is the key and prerequisite step for the application of silk protein-based materials. Various solvents and dissolving systems have been reported to dissolve SF fibers. However, the dissolution process directly affects the characteristics of SF and particularly impacts the mechanical properties of the resulting silk biomaterials in subsequent processing. The purpose of this review is to summarize the common solvents, the dissolution methods for silk protein, the properties of the resulting SF protein. The suitable use of SF dissolved in the corresponding solvent was also briefly introduced. Recent applications of SF in various biomaterials are also discussed.
Collapse
Affiliation(s)
- Hai-Yan Wang
- Silk Biotechnology Laboratory, School of Biology and Basic Medical Sciences, Soochow University, Suzhou, China
| | - Yu-Qing Zhang
- Silk Biotechnology Laboratory, School of Biology and Basic Medical Sciences, Soochow University, Suzhou, China
| | - Zheng-Guo Wei
- Silk Biotechnology Laboratory, School of Biology and Basic Medical Sciences, Soochow University, Suzhou, China
| |
Collapse
|
10
|
Gu Q, Fu C, Sun Z. Resin‐silica composite nanoparticle grafted polyethylene membranes for lithium ion batteries. J Appl Polym Sci 2021. [DOI: 10.1002/app.50713] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Qian‐Qian Gu
- State Key Laboratory of Polymer Physics and Chemistry Changchun Institute of Applied Chemistry, Chinese Academy of Sciences Changchun China
- University of Science and Technology of China Hefei China
| | - Cui‐Liu Fu
- State Key Laboratory of Polymer Physics and Chemistry Changchun Institute of Applied Chemistry, Chinese Academy of Sciences Changchun China
| | - Zhao‐Yan Sun
- State Key Laboratory of Polymer Physics and Chemistry Changchun Institute of Applied Chemistry, Chinese Academy of Sciences Changchun China
- University of Science and Technology of China Hefei China
| |
Collapse
|
11
|
Reizabal A, Costa CM, Saiz PG, Gonzalez B, Pérez-Álvarez L, Fernández de Luis R, Garcia A, Vilas-Vilela JL, Lanceros-Méndez S. Processing Strategies to Obtain Highly Porous Silk Fibroin Structures with Tailored Microstructure and Molecular Characteristics and Their Applicability in Water Remediation. JOURNAL OF HAZARDOUS MATERIALS 2021; 403:123675. [PMID: 32846265 DOI: 10.1016/j.jhazmat.2020.123675] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/08/2020] [Revised: 08/05/2020] [Accepted: 08/07/2020] [Indexed: 06/11/2023]
Abstract
The present work reports on the control of silk fibroin (SF) porous structures performance through various processing methods. The study includes the analysis of two dissolving techniques (CaCl2/H2O/EtOH ternary and LiBr/H2O binary solutions), three regeneration methods (gelation, lyophilization and gas foaming) and one post-processing (EtOH). In all the cases, followed steps lead to SF structures with porosity values above 94% and large surface areas. Also, results about samples microstructure, secondary organization, crystallinity and water behavior, reveal a direct correlation between processing and SF properties. Thanks to the achieved progress, the SF varying porous structures were evaluated for metalloids (As5+ and As3+) and heavy metals (Cr6+ and Cr3+) adsorption, observing a direct relationship between samples processing and ionic species adsorption ability. Thus, it is shown that the control of the properties of SF based porous structures through processing, represents a suitable and ecofriendly approach for the development of bio-based materials for environmental applications.
Collapse
Affiliation(s)
- A Reizabal
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940, Leioa, Spain; Departamento de Química Física, Facultad de Ciencia y Tecnología, Universidad del País Vasco/EHU, Apdo. 644, Bilbao, Spain.
| | - C M Costa
- Centro de Física, Universidade do Minho, 4710-057, Braga, Portugal; Centro de Química, Universidade do Minho, 4710-057, Braga, Portugal
| | - P G Saiz
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940, Leioa, Spain
| | - B Gonzalez
- Advanced Mining Technology Center (AMTC), Universidad de Chile, Av. Tupper 2007, Santiago, 8370451, Chile
| | - L Pérez-Álvarez
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940, Leioa, Spain; Departamento de Química Física, Facultad de Ciencia y Tecnología, Universidad del País Vasco/EHU, Apdo. 644, Bilbao, Spain
| | - R Fernández de Luis
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940, Leioa, Spain
| | - A Garcia
- Advanced Mining Technology Center (AMTC), Universidad de Chile, Av. Tupper 2007, Santiago, 8370451, Chile
| | - J L Vilas-Vilela
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940, Leioa, Spain; Departamento de Química Física, Facultad de Ciencia y Tecnología, Universidad del País Vasco/EHU, Apdo. 644, Bilbao, Spain
| | - S Lanceros-Méndez
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940, Leioa, Spain; Ikerbasque, Basque Foundation for Science, 48013, Bilbao, Spain
| |
Collapse
|
12
|
The State of the Art of Energy Harvesting and Storage in Silk Fibroin-Based Wearable and Implantable Devices. ELECTROCHEM 2020. [DOI: 10.3390/electrochem1040022] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
The energy autonomy of self-powered wearable electronics depends on the adequate development of new technologies for energy harvesting and energy storage devices based on textile fibers to facilitate the integration with truly flexible and wearable devices. Silk fiber-based systems are attractive for the design of biomedical devices, lithium-ion batteries and flexible supercapacitors, due to their nitrogen-rich structure (for preparation of hierarchical carbon-based structures), and available surface for chemical modification reinforcing electroactive properties for use in batteries and supercapacitors. Herein, this paper reviews recent advances on silk fiber-based systems for harvesting and the storage of energy and the corresponding strategies to reinforce the physical and chemical properties of the resulting composites applied as electrodes and battery separators.
Collapse
|
13
|
Barbosa JC, Correia DM, Gonçalves R, de Zea Bermudez V, Silva MM, Lanceros-Mendez S, Costa CM. Enhanced ionic conductivity in poly(vinylidene fluoride) electrospun separator membranes blended with different ionic liquids for lithium ion batteries. J Colloid Interface Sci 2020; 582:376-386. [PMID: 32861042 DOI: 10.1016/j.jcis.2020.08.046] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2020] [Revised: 08/11/2020] [Accepted: 08/12/2020] [Indexed: 12/31/2022]
Abstract
Electrospun poly(vinylidene fluoride) (PVDF) fiber membranes doped with different ionic liquids (ILs) and sharing the same anion were produced and their potential as separator membranes for battery applications was evaluated. Different types of ILs containing the same anion, bis(trifluoromethylsulfonyl)imide [TFSI]-, were used with IL concentrations ranging between 0 and 15 wt% The morphology, microstructure, thermal and electrical properties (ionic conductivity and electrochemical window) of the membranes were evaluated. The presence of ILs in the PVDF polymer matrix influences the fiber diameter and the content of the polar β phase within the polymer, as well as the degree of crystallinity. The thermal stability of the membranes decreases with the incorporation of IL. Impedance spectroscopy tests show a maximum ionic conductivity of 2.8 mS.cm-1 for 15% of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Emim][TFSI]) at room temperature. The electrochemical stability of the samples ranges from 0.0 to 6.0 V. When evaluated as battery separator membranes in C-LiFePO4 half-cells, a maximum discharge capacity of 119 mAh.g-1 at C-rate was obtained for the PVDF membrane with 15% [Emim][TFSI], with a coulombic efficiency close to 100%. The results demonstrate that the produced electrospun membranes are suitable for applications as separators for lithium ion batteries (LIBs).
Collapse
Affiliation(s)
- J C Barbosa
- Center of Physics, University of Minho, 4710-058 Braga, Portugal; Department of Chemistry and CQ-VR, University of Trás -os -Montes e Alto Douro, 5000-801 Vila Real, Portugal
| | - D M Correia
- Center of Physics, University of Minho, 4710-058 Braga, Portugal; Department of Chemistry and CQ-VR, University of Trás -os -Montes e Alto Douro, 5000-801 Vila Real, Portugal
| | - R Gonçalves
- Center of Chemistry, University of Minho, 4710-058 Braga, Portugal
| | - V de Zea Bermudez
- Department of Chemistry and CQ-VR, University of Trás -os -Montes e Alto Douro, 5000-801 Vila Real, Portugal
| | - M M Silva
- Center of Chemistry, University of Minho, 4710-058 Braga, Portugal
| | - S Lanceros-Mendez
- BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain; Ikerbasque, Basque Foundation for Science, 48013 Bilbao, Spain.
| | - C M Costa
- Center of Physics, University of Minho, 4710-058 Braga, Portugal; Center of Chemistry, University of Minho, 4710-058 Braga, Portugal.
| |
Collapse
|