High-performance nanofiltration membrane structured with enhanced stripe nano-morphology

Unveiling the spatiotemporal dynamics of membrane fouling: A focused review on dynamic fouling characterization techniques and future perspectives

Membrane technology has emerged as a crucial method for obtaining clean water from unconventional sources in the face of water scarcity. It finds wide applications in wastewater treatment, advanced treatment, and desalination of seawater and brackish water. However, membrane fouling poses a huge challenge that limits the development of membrane-based water treatment technologies. Characterizing the dynamics of membrane fouling is crucial for understanding its development, mechanisms, and effective mitigation. Instrumental techniques that enable in situ or real-time characterization of the dynamics of membrane fouling provide insights into the temporal and spatial evolution of fouling, which play a crucial role in understanding the fouling mechanism and the formulation of membrane control strategies. This review consolidates existing knowledge about the principal advanced instrumental analysis technologies employed to characterize the dynamics of membrane fouling, in terms of membrane structure, morphology, and intermolecular forces. Working principles, applications, and limitations of each technique are discussed, enabling researchers to select appropriate methods for their specific studies. Furthermore, prospects for the future development of dynamic characterization techniques for membrane fouling are discussed, underscoring the need for continued research and innovation in this field to overcome the challenges posed by membrane fouling.

A comprehensive review on the behavior and evolution of oil droplets during oil/water separation by membranes

Membrane separation technology has significant advantages for treating oil-in-water emulsions. Understanding the evolution of oil droplets could reveal the interfacial and colloidal interactions, facilitate the design of advanced membranes, and improve the separation performances. This review on the characteristic behavior and evolution of oil droplets focuses on the advanced analytical techniques, and the subsequent fouling as well as demulsification effects during membrane separation. A detailed introduction is provided on microscopic observations and numerical simulations of the dynamic evolution of oil droplets, featuring real-time in-situ visualization and accurate reconstruction, respectively. Characteristic behaviors of these oil droplets include attachment, pinning, wetting, spreading, blockage, intrusion, coalescence, and detachment, which have been quantified by specific proposed parameters and criteria. The fouling process can be evaluated using Hermia and resistance models. The related adhesion force and intrusion pressure as well as droplet-droplet/membrane interfacial interactions can be accurately quantified using various force analysis methods and advanced force measurement techniques. It is encouraging to note that oil coalescence has been achieved through various effects such as electrostatic interactions, mechanical actions, Laplace pressure/surface free energy gradients, and synergistic effects on functional membranes. When oil droplets become destabilized and coalesce into larger ones, the functional membranes can overcome the limitations of size-sieving effect to attain higher separation efficiency. This not only bypasses the trade-off between permeability and rejection, but also significantly reduces membrane fouling. Finally, the challenges and potential research directions in membrane separation are proposed. We hope this review will support the engineering of advanced materials for oil/water separation and research on interface science in general.

Revisiting scaling of calcium sulfate in membrane distillation: Uncertainty of crystal-membrane interactions

Scaling of calcium sulfate (CaSO₄) is a stumbling block to the development of membrane distillation (MD), which holds promise for the treatment of saline water/wastewater. Despite increasing efforts made to understand the scaling behavior of CaSO₄ in a process of MD and thereby develop strategies for mitigating the negative effects, considerable uncertainty remains about occurrence of the wetting and structural damage that could result from the strong crystal-membrane interactions. This study combined experimental and theoretical approaches to corroborate that a higher degree of supersaturation could be achieved by concentrating the CaSO₄ in the feed at a faster rate; the elevated supersaturation would be in favor of exerting substantially high crystallization pressure on the membrane structures. In particular, the theoretical analysis established two dimensionless groups for measuring the relative importance of the concentration effect and quantifying the essential role played by the crystalline growth, respectively. In addition to alleviating the uncertainty, this study would be beneficial to the design of MD processes with improved scaling resistance.

Tailoring properties and performance of thin-film composite membranes by salt additives for water treatment: A critical review

During the fabrication of thin film composite (TFC) membranes by interfacial polymerization (IP), the utilization of salt additives is one of the effective methods to regulate membrane properties and performance. Despite gradually receiving widespread attention for membrane preparation, the strategies, effects and underlying mechanisms of using salt additives have not yet been systematically summarized. This review for the first time provides an overview of various salt additives used to tailor properties and performance of TFC membranes for water treatment. By classifying salt additives into organic and inorganic salts, the roles of added salt additives in the IP process and the induced changes in membrane structure and properties are discussed in detail, and the different mechanisms of salt additives affecting membrane formation are summarized. Based on these mechanisms, the salt-based regulation strategies have shown great potential for improving the performance and application competitiveness of TFC membranes, including overcoming the trade-off relationship between water permeability and salt selectivity, tailoring membrane pore size distribution for precise solute-solute separation, and enhancing membrane antifouling performance. Finally, future research directions are suggested to focus on the long-term stability assessment of salt-modified membranes, the combined use of different salt additives, and the integration of salt regulation with other membrane design or modification strategies.

Does Surface Roughness Necessarily Increase the Fouling Propensity of Polyamide Reverse Osmosis Membranes by Humic Acid?

Surface roughness has crucial influence on the fouling propensity of thin film composite (TFC) polyamide reverse osmosis (RO) membranes. A common wisdom is that rougher membranes tend to experience more severe fouling. In this study, we compared the fouling behaviors of a smooth polyamide membrane (RO-s) and a nanovoid-containing rough polyamide membrane (RO-r). Contrary to the traditional belief, we observed more severe fouling for RO-s, which can be ascribed to its uneven flux distribution caused by the "funnel effect". Additional tracer filtration tests using gold nanoparticles revealed a more patchlike particle deposition pattern, confirming the adverse impact of "funnel effect" on membrane water transport. In contrast, the experimentally observed lower fouling propensity of the nanovoid-containing rough membrane can be explained by: (1) the weakened "funnel effect" thanks to the presence of nanovoids, which can regulate the water transport pathway through the membrane and (2) the decreased average localized flux over the membrane surface due to the increased effective filtration area for the nanovoid-induced roughness features. The current study provides fundamental insights into the critical role of surface roughness in membrane fouling, which may have important implications for the future development of high-performance antifouling membranes.

Nanofiltration Membranes with Crumpled Polyamide Films: A Critical Review on Mechanisms, Performances, and Environmental Applications

Nanofiltration (NF) membranes have been widely applied in many important environmental applications, including water softening, surface/groundwater purification, wastewater treatment, and water reuse. In recent years, a new class of piperazine (PIP)-based NF membranes featuring a crumpled polyamide layer has received considerable attention because of their great potential for achieving dramatic improvements in membrane separation performance. Since the report of novel crumpled Turing structures that exhibited an order of magnitude enhancement in water permeance ( Science 2018, 360 (6388), 518-521), the number of published research papers on this emerging topic has grown exponentially to approximately 200. In this critical review, we provide a systematic framework to classify the crumpled NF morphologies. The fundamental mechanisms and fabrication methods involved in the formation of these crumpled morphologies are summarized. We then discuss the transport of water and solutes in crumpled NF membranes and how these transport phenomena could simultaneously improve membrane water permeance, selectivity, and antifouling performance. The environmental applications of these emerging NF membranes are highlighted, and future research opportunities/needs are identified. The fundamental insights in this review provide critical guidance on the further development of high-performance NF membranes tailored for a wide range of environmental applications.

Fabrication of Loose Nanofiltration Membranes with High Rejection Selectivity between Natural Organic Matter and Salts for Drinking Water Treatment

Loose nanofiltration (LNF) membranes with a molecular weight cut-off (MWCO) of about 1000 Da and high surface negative charge density have great application potential for drinking water treatment pursuing high rejection selectivity between natural organic matter (NOM) and mineral salts. This study was conducted to exploit the novel method coupling non-solvent induced phase separation (NIPS) and interfacial polymerization (IP) for the preparation of high-performance LNF membranes. A number of LNF membranes were synthesized by varying the polyethersulfone (PES) and piperazine (PIP) concentrations in the cast solution for the PES support layer preparation. Results showed that these two conditions could greatly affect the membrane water permeance, MWCO and surface charge. One LNF membrane, with a water permeance as high as 23.0 ± 1.8 L/m²/h/bar, when used for the filtration of conventional process-treated natural water, demonstrated a rejection of NOM higher than 70% and a low rejection of mineral salts at about 20%. Both the mineral salts/NOM selectivity and permselectivity were superior to the currently available LNF membranes as far as the authors know. This study demonstrated the great advantage of the NIPS-IP method for the fabrication of LNF membranes, particularly for the advanced treatment of drinking water.

Tailored design of nanofiltration membranes for water treatment based on synthesis-property-performance relationships

Tailored design of high-performance nanofiltration (NF) membranes is desirable because the requirements for membrane performance, particularly ion/salt rejection and selectivity, differ among the various applications of NF technology ranging from drinking water production to resource mining. However, this customization greatly relies on a comprehensive understanding of the influence of membrane fabrication methods and conditions on membrane properties and the relationships between the membrane structural and physicochemical properties and membrane performance. Since the inception of NF, much progress has been made in forming the foundation of tailored design of NF membranes and the underlying governing principles. This progress includes theories regarding NF mass transfer and solute rejection, further exploitation of the classical interfacial polymerization technique, and development of novel materials and membrane fabrication methods. In this critical review, we first summarize the progress made in controllable design of NF membrane properties in recent years from the perspective of optimizing interfacial polymerization techniques and adopting new manufacturing processes and materials. We then discuss the property-performance relationships based on solvent/solute mass transfer theories and mathematical models, and draw conclusions on membrane structural and physicochemical parameter regulation by modifying the fabrication process to improve membrane separation performance. Next, existing and potential applications of these NF membranes in water treatment processes are systematically discussed according to the different separation requirements. Finally, we point out the prospects and challenges of tailored design of NF membranes for water treatment applications. This review bridges the long-existing gaps between the pressing demand for suitable NF membranes from the industrial community and the surge of publications by the scientific community in recent years.

Toward Enhancing Desalination and Heavy Metal Removal of TFC Nanofiltration Membranes: A Cost-Effective Interface Temperature-Regulated Interfacial Polymerization

Polyamide (PA) chemistry-based nanofiltration (NF) membranes have an important role in the field of seawater desalination and wastewater reclamation. Achieving an ultrathin and defect-free active layer via precisely controlled interfacial polymerization (IP) is an effective routine to improve the separation efficiencies of NF membranes. Herein, the morphologies and chemical structures of the thin-film composite (TFC) NF membranes were accurately regulated by tailoring the interfacial reaction temperature during the IP process. This strategy was achieved by controlling the temperature (-15, 5, 20, 35, and 50°) of the oil-phase solutions. The structural compositions, morphological variations, and separation features of the fabricated NF membranes were studied in detail. In addition, the formation mechanisms of the NF membranes featuring different PAs were also proposed and discussed. The temperature-assisted IP (TAIP) method greatly changed the compositions of the resultant PA membranes. A very smooth and thin PA film was obtained for the NF membranes fabricated at a low interfacial temperature; thus, a high 19.2 L m^-2 h^-1 bar^-1 of water permeance and 97.7% of Na₂SO₄ rejection were observed. With regard to the NF membranes obtained at a high interfacial temperature, a lower water permeance and higher salt rejection with fewer membrane defects were achieved. Impressively, the high interfacial temperature-assisted NF membranes exhibited uniform coffee-ring-like surface morphologies. The special surface-featured NF membrane showed superior separation for selected heavy metals. Rejections of 93.9%, 97.9%, and 87.7% for Cu²⁺, Mn²⁺, and Cd²⁺ were observed with the optimized membrane. Three cycles of fouling tests indicated that NF membranes fabricated at low temperatures exhibited excellent antifouling behavior, whereas a high interface temperature contributed to the formation of NF membranes with high fouling tendency. This study provides an economical, facile, and universal TAIP strategy for tailoring the performances of TFC PA membranes for environmental water treatment.

Nanofiltration for drinking water treatment: a review

In recent decades, nanofiltration (NF) is considered as a promising separation technique to produce drinking water from different types of water source. In this paper, we comprehensively reviewed the progress of NF-based drinking water treatment, through summarizing the development of materials/fabrication and applications of NF membranes in various scenarios including surface water treatment, groundwater treatment, water reuse, brackish water treatment, and point of use applications. We not only summarized the removal of target major pollutants (e.g., hardness, pathogen, and natural organic matter), but also paid attention to the removal of micropollutants of major concern (e.g., disinfection byproducts, per- and polyfluoroalkyl substances, and arsenic). We highlighted that, for different applications, fit-for-purpose design is needed to improve the separation capability for target compounds of NF membranes in addition to their removal of salts. Outlook and perspectives on membrane fouling control, chlorine resistance, integrity, and selectivity are also discussed to provide potential insights for future development of high-efficiency NF membranes for stable and reliable drinking water treatment.

In-situ 3D fouling visualization of membrane distillation treating industrial textile wastewater by optical coherence tomography imaging

Membrane fouling, which is caused by the deposition of particles on the membrane surface or pores, reduces system performance in membrane distillation (MD) applications, resulting in increased operational costs, poor recovery, and system failure. Optical Coherence Tomography enables in-situ foulant monitoring in both 2D and 3D, however, the 2D images can only determine fouling layer thickness in severe fouling. Therefore, in this study, an advanced 3D imaging analysis technique using intensity range filters was proposed to quantify fouling layer formation during MD through the use of a single 3D image. This approach not only reduces computational power requirements, but also successfully separated the fouling layer from the membrane at the microscale. Thus, the thickness, fouling index, and fouling layer coverage can be evaluated in real time. To test this approach, Polyvinylidene fluoride (C-PVDF) and polytetrafluoroethylene (C-PTFE) membranes were used to treat a feed consisting of industrial textile wastewater. Thin and disperse foulants was observed on the C-PTFE, with a 22 µm thick fouling layer which could not be observed using 2D images after 24 h. Moreover, the C-PTFE demonstrated better antifouling ability than the C-PVDF as demonstrated by its lower fouling index, which was also supported by surface energy characterization. This work demonstrates the significant potential of 3D imagery in the long-term monitoring of membrane fouling process to improve membrane antifouling performance in MD applications, which can lead to lowered operational costs and improved system stability.

Advances in the Use of Nanocomposite Membranes for Carbon Capture Operations

The adoption of nanodoped membranes in the areas of gas stream separation, water, and wastewater treatments due to the physical and operational advantages of such membranes has significantly increased. The literature has shown that the surface structure and physicochemical properties of nanodoped membranes contribute significantly to the interaction and rejection characteristics when compared to bare membranes. This study reviews the recent developments on nanodoped membranes, and their hybrids for carbon capture and gas separation operations. Features such as the nanoparticles/materials and hybrids used for membrane doping and the effect of physicochemical properties and water vapour in nanodoped membrane performance for carbon capture are discussed. The highlights of this review show that nanodoped membrane is a facile modification technique which improves the membrane performance in most cases and holds a great potential for carbon capture. Membrane module design and material, thickness, structure, and configuration were identified as key factors that contribute directly, to nanodoped membrane performance. This study also affirms that the three core parameters satisfied before turning a microporous material into a membrane are as follows: high permeability and selectivity, ease of fabrication, and robust structure. From the findings, it is also observed that the application of smart models and knowledge-based systems have not been extensively studied in nanoparticle-/material-doped membranes. More studies are encouraged because technical improvements are needed in order to achieve high performance of carbon capture using nanodoped membranes, as well as improving their durability, permeability, and selectivity of the membrane.

Highly Permeable Polyamide Nanofiltration Membrane Mediated by an Upscalable Wet-Laid EVOH Nanofibrous Scaffold

For energy-saving purposes, the pursuit of ultrahigh permeance nanofiltration membranes without sacrificing selectivity is never-ending in desalination, wastewater treatment, and industrial product separation. Herein, we reported a novel facile route to engineer a highly porous and superhydrophilic nanofibrous substrate to mediate the interfacial polymerization between trimesoyl chloride and piperazine, generating an ultrathin PA active layer (∼13 nm) with a hierarchical crumpled surface. The wet laying process and subsequent plasma treatment endowed a rougher and more hydrophilic surface for ethylene vinyl alcohol copolymer (EVOH) nanofibers in the thin compact nanofibrous scaffold (∼9 μm) with a mean pore size of 210 nm, radically different from the nanofibrous membrane by other methods. Nanofibrous scaffold with these features provide abundant thin-thick alternative continuous water layers between nanofibers and organic phase, facilitating the formation of the abovementioned PA layer. As a result, an ultrahigh permeance of 42.25 L·m^-2 h^-1 bar^-1 and a reasonably high rejection of 95.97% to 1000 ppm Na₂SO₄ feed solution were obtained, superior to most state-of-the-art NF membranes reported so far. Our work provides an easy and scalable method to fabricate advanced PA NF membranes with outstanding performance, highlighting its great potential in liquid separation.

Modeling of Nanofiltration Process Using DSPM-DE Model for Purification of Amine Solution

The formation of heat stable salts (HSS) during the natural gas sweetening process by amine solvent causes many problems such as corrosion, foaming, capacity reduction, and amine loss. A modeling study was carried out for the removal of HSS ions from amine solution using nanofiltration (NF) membrane process that ensures the reuse of amine solution for gas sweetening. This model studies the physics of the nanofiltration process by adjusting and investigating pore radius, the effects of membrane charge, and other membrane characteristics. In this paper, the performance of the ternary ions was investigated during the removal process from methyl di-ethanol amine solution by the nanofiltration membrane process. Correlation between feed concentration and permeate concentration, using experimental results with mathematical correlation as Ci,p = f (Ci,f) was used in modeling. The results showed that the calculated data from the model provided a good agreement with experimental results (R2 = 0.90-0.75). Also, the effect of operating conditions (including feed pressure and feed flow rate on ions rejection and recovery ratio across the flat-sheet membrane) was studied. The results showed that the recovery and rejection ratios of the NF membrane depend on the driving pressure across the membrane. While the driving pressure is affected by the feed flow conditions and feed pressure.

A Critical Review on Thin-Film Nanocomposite Membranes with Interlayered Structure: Mechanisms, Recent Developments, and Environmental Applications

The separation properties of polyamide reverse osmosis and nanofiltration membranes, widely applied for desalination and water reuse, are constrained by the permeability-selectivity upper bound. Although thin-film nanocomposite (TFN) membranes incorporating nanomaterials exhibit enhanced water permeance, their rejection is only moderately improved or even impaired due to agglomeration of nanomaterials and formation of defects. A novel type of TFN membranes featuring an interlayer of nanomaterials (TFNi) has emerged in recent years. These novel TFNi membranes show extraordinary improvement in water flux (e.g., up to an order of magnitude enhancement) along with better selectivity. Such enhancements can be achieved by a wide selection of nanomaterials, ranging from nanoparticles, one-/two-dimensional materials, to interfacial coatings. The use of nanostructured interlayers not only improves the formation of polyamide rejection layers but also provides an optimized water transport path, which enables TFNi membranes to potentially overcome the longstanding trade-off between membrane permeability and selectivity. Furthermore, TFNi membranes can potentially enhance the removal of heavy metals and micropollutants, which is critical for many environmental applications. This review critically examines the recent developments of TFNi membranes and discusses the underlying mechanisms and design criteria. Their potential environmental applications are also highlighted.

Sharpening Nanofiltration: Strategies for Enhanced Membrane Selectivity

Nanofiltration plays an increasingly large role in many industrial applications, such as water treatment (e.g., desalination, water softening, and fluoride removal) and resource recovery (e.g., alkaline earth metals). Energy consumption and benefits of nanofiltration processes are directly determined by the selectivity of the nanofiltration membranes, which is largely governed by pore-size distribution and Donnan effects. During operation, the separation performance of unmodified nanofiltration membranes will also be impacted (deleteriously) upon unavoidable membrane fouling. Many efforts, therefore, have been directed toward enhancing the selectivity of nanofiltration membranes, which can be classified into membrane fabrication method improvement and process intensification. This review summarizes recent developments in the field and provides guidance for potential future approaches to improve the selectivity of nanofiltration membranes.