Microfiber aligned hollow fiber membranes from immiscible polymer solutions by phase inversion

Preparation of composite polyethersulfone membrane containing basalt powder and optimization of the parameters using response surface methodology

In this study, environmental-friendly composite polyethersulfone (PES) membranes based on basalt powder were prepared by phase inversion method. The effects of polymer percentage, the basalt percentage, and the thickness of the membrane were investigated on the distilled water flux, compaction factor, bovine serum albumin (BSA) rejection, contact angle, fouling factor and the parameters were modelled by response surface methodology (RSM). The distilled water flux increased when the basalt was added to the membrane up to 6% percentage of the polymer amount. The blending of basalt also provided resistance against the membrane compaction. The BSA rejection experiments approved the positive effects of basalt on the rejections efficiencies. At higher basalt percentages, the rejection efficiencies increased from 78% at the raw membrane to 99% for the composite membranes had 10% basalt. The adding of basalt to the membranes decreased the contact angles. The hydrophilicity of the membranes contained basalt in their structures was higher than those which had not basalt. By comparison with the neat membranes and the basalt added membrane, it can be said that the basalt increased the flux recovery and decreased the irreversible fouling factors. The basalt increased the antifouling properties for the composite membranes. Finally, the prepared membranes were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX).

State-of-the-Art Organic- and Inorganic-Based Hollow Fiber Membranes in Liquid and Gas Applications: Looking Back and Beyond

The aggravation of environmental problems such as water scarcity and air pollution has called upon the need for a sustainable solution globally. Membrane technology, owing to its simplicity, sustainability, and cost-effectiveness, has emerged as one of the favorable technologies for water and air purification. Among all of the membrane configurations, hollow fiber membranes hold promise due to their outstanding packing density and ease of module assembly. Herein, this review systematically outlines the fundamentals of hollow fiber membranes, which comprise the structural analyses and phase inversion mechanism. Furthermore, illustrations of the latest advances in the fabrication of organic, inorganic, and composite hollow fiber membranes are presented. Key findings on the utilization of hollow fiber membranes in microfiltration (MF), nanofiltration (NF), reverse osmosis (RO), forward osmosis (FO), pervaporation, gas and vapor separation, membrane distillation, and membrane contactor are also reported. Moreover, the applications in nuclear waste treatment and biomedical fields such as hemodialysis and drug delivery are emphasized. Subsequently, the emerging R&D areas, precisely on green fabrication and modification techniques as well as sustainable materials for hollow fiber membranes, are highlighted. Last but not least, this review offers invigorating perspectives on the future directions for the design of next-generation hollow fiber membranes for various applications. As such, the comprehensive and critical insights gained in this review are anticipated to provide a new research doorway to stimulate the future development and optimization of hollow fiber membranes.

Naturally Extracted Hydrophobic Solvent and Self-Assembly in Interfacial Polymerization

Pharmaceutical, chemical, and food industries are actively implementing membrane nanofiltration modules in their processes to separate valuable products and recover solvents. Interfacial polymerization (IP) is the most widely used method to produce thin-film composite membranes for nanofiltration and reverse osmosis processes. Although membrane processes are considered green and environmentally friendly, membrane fabrication has still to be further developed in such direction. For instance, the emission of volatile solvents during membrane production in the industry has to be carefully controlled for health reasons. Greener solvents are being proposed for phase-separation membrane manufacture. For the IP organic phase, the proposition of greener alternatives is in an early stage. In this work, we demonstrate the preparation of a high-performing composite membrane employing zero vapor pressure and naturally extracted oleic acid as the IP organic phase. Its long hydrophobic chain ensures intrinsic low volatility and acid monomer dissolution, while the polar head induces a unique self-assembly structure during the film formation. Membranes prepared by this technique were selective for small molecules with a molecular weight cutoff of 650 g mol^-1 and a high permeance of ∼57 L m^-2 h^-1 bar^-1.