A modified TA-APTES coating: Endowing porous membranes with uniform, durable superhydrophilicity and outstanding anti-crude oil-adhesion property via one-step process

Water-Assisted Programmable Assembly of Flexible and Self-Standing Janus Membranes

Janus membranes with asymmetric wettability have been considered cutting-edge for energy/environmental-sustainable applications like water/fog harvester, breathable skin, and smart sensor; however, technical challenges in fabrication and accurate regulation of asymmetric wettability limit their development. Herein, by using water-assisted hydrogen-bonded (H-bonded) assembly of small molecules at water/oil interface, a facile strategy is proposed for one-step fabrication of membranes with well-regulable asymmetric wettability. Asymmetric orderly patterns, beneficial for mass transport based on abundant high-permeability sites and large surface area, are constructed on opposite membrane surfaces. Upon tuning water-assisted H-bonding via H-sites/configuration design and temperature/pH modulation, double-hydrophobic, double-hydrophilic, and hydrophobic-hydrophilic membranes are facilely fabricated. The Janus membranes show smart vapor-responsive curling and unidirectional water transport with promising flux of 1158±25 L m-2  h-1 under natural gravity and 31500±670 L·(m-2  h-1  bar-1 ) at negative pressure. This bottom-up approach offers a feasible-to-scalable avenue to precise-manipulation of Janus membranes for advanced applications, providing an effective pathway for developing tailor-made self-assembled nanomaterials.

Electron microscopy approach to the wetting dynamics of single organosilanized mesopores

Columnar mesoporous silicon (PSi) with hydrophobic vs. hydrophilic chemistries was chosen as a model for the local (pore-by-pore) study of water-pore interactions. Tomographic reconstructions provided a 3D view of the ramified pore structure. An in situ study of PSi wetting was conducted for categorized pore diameters by environmental scanning TEM. An appropriate setting of the contrast allows for the normalization of the gray scale in the images as a function of relative humidity (RH). This allows constructing an isotherm for each single pore and a subsequent averaging provides an isotherm for each pore size range. The isotherms systematically point to an initial adsorption through the formation of water adlayers, followed by a capillary filling process at higher RH. The local isotherms correlate with (global) gravimetric determination of wetting. Our results point at the validation of a technique for the study of aging and stability of single-pore nanoscale devices.

γ-Cyclodextrin-based metal-organic frameworks for lactonic sophorolipid application in enhanced oil recovery

Lactonic sophorolipid (LSL) exhibits numerous surfactant activities, such as emulsification, wetting action, dispersion effect, and oil-washing activities. Nevertheless, LSLs have poor water solubility, which restrains their application in the petroleum industry. In this research, a new compound, lactonic sophorolipid cyclodextrin metal-organic framework (LSL-CD-MOFs), was obtained by loading LSL into γ-cyclodextrin metal-organic frameworks (γ-CD-MOFs). The LSL-CD-MOFs were characterized by N₂ adsorption analysis, X-ray powder diffraction analysis, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Loading LSL into γ-CD-MOFs significantly increased the apparent water solubility of LSL. However, the critical micelle concentration of LSL-CD-MOFs was similar to that of LSL. Furthermore, LSL-CD-MOFs effectively reduced the viscosities and improved the emulsification indices of oil-water mixtures. Oil-washing tests, which were conducted using oil sands, revealed that the LSL-CD-MOFs yielded an oil-washing efficiency of 85.82 % ± 2.04 %. Overall, γ-CD-MOFs are promising carriers for LSL, and LSL-CD-MOFs are a potential, low-cost, new, green surfactant for enhanced oil recovery.

Suppression of pyrite oxidation by co-depositing bio-inspired PropS-SH-tannic acid coatings for the source control acid mine drainage

In previous works, both tannic acid (TA) and organosilane-based passivators have been proven to possess good inhibition effects on pyrite oxidation, which could effectively prevent acid mine drainage (AMD) generation at the source. However, the hydrophilicity of TA passivation film and the complex coating process of organosilane-based passivators (high temperature conditions were required during the process carried out) may limit their further practical use. Therefore, to achieve the purpose of better coating treatment of pyrite under mild conditions, TA and γ-mercaptopropyltrimethoxysilane (PropS-SH) were introduced to synergistically passivate pyrite in this work. Electrochemistry tests and chemical leaching experiments both confirmed that PropS-SH-TA coated pyrite had better oxidation resistance than raw pyrite and single PropS-SH or TA coated pyrite. Additionally, the analyses of scanning electron microscopy (SEM) measurements and static water contact angle tests demonstrated that a scaly coating was formed on PropS-SH-TA coated pyrite surface, which may be the reason for the significant improvement of its surface hydrophobicity. Finally, the study on the film-forming mechanism of PropS-SH-TA composite passivator displayed that the benzoquinone derivatives formed by TA could copolymerize with PropS-SH through Michael addition or Schiff base reaction, which constructed a dense hydrophobic film on pyrite surface. The newly formed composite film could provide a better oxidation barrier for pyrite based on TA passivation film.

Rapid Approach to Synthesizing a Tannic Acid (TA)-3-Aminopropyltrietoxysilane (APTES) Coating for Efficient Oil-Water Emulsion Separation

Plant polyphenol-inspired surface modification of membranes is helpful for oil-water separation. However, the preparation of this coating is time-consuming. Herein, we introduce a rapid synthesis of the TA-APTES coating by the addition of sodium periodate (SP). The surface chemical composition and morphology of the resultant TA-APTES hybrid coatings were characterized using SEM, ATR-FTIR, and XPS. The hydrophilicity and membrane performance were investigated by the water contact angle, pure water permeability, and oil rejection for an isooctane-in-water emulsion. The experimental findings revealed that the optimal microfiltration (MF) membrane (MF-TA-APTES-SP-0.05) displayed exceptional hydrophilicity and water permeability (9558 L m^-2 h^-1 bar^-1). The membrane realized highly efficient separation with a permeability (4117 L m^-2 h^-1 bar^-1) and rejection of oils (>99%). Furthermore, it possessed outstanding chemical stability and maintained underwater superoleophobicity even after exposure to harsh conditions. This simple and rapid strategy of developing hydrophilic coatings as a modifier for the poly(vinylidene fluoride) membranes has potential applications in oil-water separation and wastewater treatment.

Sustainable, biocompatible, and mass-producible superwetting water caltrop shell biochars for emulsion separations

The separation of oily wastewater, specifically emulsions, is a crucial global issue. Possible strategies for the efficient separation of emulsified oil/water mixtures through sustainable and environmentally friendly materials have recently drawn considerable attention. In our study, we prepared superwetting water caltrop shell biochar (WCSB) via a top-lit-updraft carbonization procedure. The as-prepared WCSB was characterized by superhydrophilicity, underwater superoleophobicity, underoil superhydrophilicity, and underoil water adsorption ability. Because of its superwetting properties, WCSB was used for the separation of both surfactant-stabilized oil-in-water emulsions (SOIWEs) and surfactant-stabilized water-in-oil emulsions (SWIOEs) with very high fluxes (up to 74,700 and 241,000 L m^-2 h^-1 bar^-1 for SOIWE and SWIOE, respectively). The separation performances were excellent, with oil contents in all SOIWE filtrates lower than 10 ppm and oil purities in all SWIOE filtrates higher than 99.99 wt%. Moreover, WCSB was applied to separate dye-spiked emulsions. Due to their high emulsion separation ability, sustainability, good biocompatibility, and ease of mass production, the as-prepared WCSBs have notable potential for utilitarian applications.

Superhydrophilic polyethersulfone (PES) membranes with high scale inhibition properties obtained through bionic mineralization and RTIPS

Reverse thermally induced separation (RTIPS) was used to obtain a separation membrane with a better internal structure for a higher water flux and a surface that could easily form a hydration layer. In comparison to the traditional modification method, this work focused on the aspect that the internal structure obtained by changing the membrane-making method provided easier adhesion conditions for the dopamine/TiO₂ hybrid nanoparticles (DA/TiO₂ HNPs) obtained by biomimetic mineralization. It provided a basis for exploring the variation in adhesion with the water bath temperature and the amount of titanium added through the study of turbidity point, SEM images, water contact angle, thermogravimetric test, EDX, AFM, XPS, FTIR and other test results. The SEM images proved that the membrane obtained through the RTIPS method had a porous surface and spongy internal structure, furthermore, additional polymers were adsorbed. Use of EDX demonstrated that biomimetic mineralization prevented the production of agglomerated titanium dioxide. XPS and FTIR spectra confirmed the introduction and immobilization of HNP aggregation. Moreover, a decrease in the surface roughness and water contact angle further suggested an improvement in the hydrophilicity of the modified membrane. The introduction of HNP at a higher water bath temperature helped increase the water flux up to ten times, moreover, the oil-water separation efficiency could still reach over 99.50%. Lastly, a cycle test of the modified membrane under the optimal conditions helped confirm that the membrane forming conditions at this time could provide a better environment for the formation of the hydrophilic layer, which was conducive to the recycling of the separation membrane. In summary, more fixed more hydrophilic particles could be obtained through the RTIPS method based on biomimetic mineralization to prevent the accumulation of titanium dioxide, thus helping improve permeability and anti-fouling of the membrane.

Design of microstructure for hollow fiber loose nanofiltration separation layer and its compactness-tailoring mechanism

In order to promote the application of membrane technology in the treatment of textile wastewater containing small molecule dye, fabricating a hollow fiber loose nanofiltration (LNF) with a thin and compact separation layer and deepening the understanding of compactness-tailoring mechanism in chemical crosslinking are essential. Firstly, the mechanisms of synergistic crosslinking of PEI-70K and PEI-10K, along with a weakening of the PEI hydration by ethanol, were expounded in primary crosslinking. Then, some LNF separation layers with different compactness were prepared through crosslinking with different crosslinkers to further reduce pore size, which resulted in the efficient removal (~100%) of a small molecular dye (methyl orange (MO), M = 327 g mol^-1). The removal of methyl orange is mainly caused by size sieving. The relationship among the pore size, the M_w of the secondary crosslinkers, and the pore size reduction rate was interpreted by comparing the pore size reduction rate of three secondary crosslinkers with different molecular weights. In addition, the as-prepared separation layer exhibited excellent dimensional stability and solvent resistance. This paper not only provides a reference for fabricating hollow fiber LNF with better purification performance, but also shows their potential in developing solvent resistant nanofiltration.

Tannic acid-based functional coating: surface engineering of membranes for oil-in-water emulsion separation

Recent progress in the tannic acid-based functional coating for surface engineering of membranes toward oil-in-water emulsion separation is summarized.