Enhancing the antifouling properties of a PVDF membrane for protein separation by grafting branch-like zwitterions via a novel amphiphilic SMA-HEA linker

Precise Lubrication and Protection of Cartilage Damage by Targeting Hydrogel Microsphere

Osteoarthritis (OA) is a degenerative bone and joint disease characterized by decreased cartilage lubrication, leading to continuous wear and ultimately irreversible damage. This situation is particularly challenging for early-stage OA, as current bio-lubricants lack precise targeting for small inflammatory lesions. In this work, an antibody-mediated targeting hydrogel microspheres (HMS) is developed to precisely lubricate the local injury site of cartilage and prevent the progression of early OA. Anti-Collagen type I (Anti-Col1) is an antibody that targets cartilage injury sites in early OA stages. It is anchored on a HMS matrix made of Gelatin methacrylate (GelMA) and poly (sulfobetaine methacrylate) (PSBMA) to create targeted HMS (T-G/S HMS). The T-G/S HMS's high hydrophilicity, along with the dynamic interaction between its surficial Anti-Col1 and the Col1 on cartilage injury site, ensures its precise and effective lubrication of early OA lesions. Consequently, injecting T-G/S HMS into rats with early OA significantly slows disease progression and reduces symptoms. In conclusion, the developed injectable targeted lubricating HMS and the precisely targeted lubrication strategy represent a promising, convenient technique for treating OA, particularly for slowing the early-stage OA progression.

Zwitterionic Energetic Materials: Synthesis, Structural Diversity and Energetic Properties

Zwitterionic compounds are an emergent class of energetic materials and have gained synthetic interest of many in the recent years. Due to their better packing efficiencies and strong inter/intramolecular electrostatic interactions, they often ensue superior energetic properties than their salt analogues. A systematic review from the perspective of design, synthesis, and physicochemical properties evaluation of the zwitterionic energetic materials is presented. Depending on the parent ring(s) used for the synthesis and the type of moieties bearing positive and negative charges, different classes of energetic materials, such as primary explosives, secondary explosives, heat resistant explosives, oxidizers, etc., may result. The properties of some of the energetic zwitterionic compounds are also compared with analogous energetic salts. This review will encourage readers to explore the possibility of designing new zwitterionic energetic materials.

Radiation‐Induced Admicellar Graft Polymerization of 2‐Hydroxyethyl Methacrylate onto Polyvinylidene Fluoride Membranes Using an Electron Beam Accelerator

The efficiency of admicellar graft polymerization in functionalizing polyvinylidene fluoride (PVDF) membranes was explored. The effect of 2‐hydroxyethyl methacrylate (HEMA) concentration and the absorbed dose was investigated using a simultaneous method of radiation‐induced graft polymerization. The degree of grafting increased with raising the absorbed dose and HEMA concentration. The Fourier transform infrared (FTIR) peak for C–O stretch and the asymmetric and symmetric stretching of the C–O–C bridge, respectively, proved the presence of poly(2‐hydroxyethyl methacrylate) (PHEMA) on the modified PVDF. As the grafting yield increased, rougher surfaces were observed. According to contact angle analysis, the grafted membrane with a higher grafting yield outperformed the low grafting yield membrane in terms of water flux and hydrophilicity.

Super-adsorbent microspheres based on a triallyl isocyanurate-maleic anhydride copolymer for the removal of organic pollutants from water

Owing to the frequent occurrence of diclofenac sodium (DS) in fresh aquatic environments and its potential toxicity towards living organisms, the effective removal of DS has attracted worldwide attention. Herein, a green and efficient strategy to fabricate crosslinked microspheres with interconnected mesoporous structures and abundant adsorption active sites was developed. With this strategy, triallyl isocyanurate (TAIC)-maleic anhydride (MAH) copolymer microspheres (TMs) with a diameter of 1.19-1.35 μm were first prepared by self-stabilized precipitation (2SP) polymerization, and the TMs possess a large amount reactive anhydride groups (62.5-71.8 mol%), a specific surface area of 51.6-182.4 m² g^-1 and a mesoporous structure (average pore size: 3.4-3.8 nm). Then the TMs were further functionalized with polyethylenimine (PEI) to give rise to cationic microspheres (Cat-TMs), which showed excellent adsorption performance to DS with a rapid adsorption rate (reached equilibrium within 30 min), a very high equilibrium adsorption capacity (1421 mg g^-1) and excellent recyclability. The pseudo-second-order model and Langmuir model were a good fit for the adsorption kinetic and isotherm process, respectively. Furthermore, due to the high cation density (4.291 mmol g^-1) and excellent pH buffer capacity of Cat-TMs, the adsorption capacity can be maintained at a high level within the pH range of 6-10. The regenerated Cat-TMs showed only a slight loss (<5%) in the adsorption capacity even after 5 adsorption-desorption cycles. In short, Cat-TMs can be considered as a highly promising adsorbent for the rapid and ultra-efficient removal of anionic organic contaminants and have significant potential to be applied in wastewater treatment.

Designing sustainable membrane-based water treatment via fouling control through membrane interface engineering and process developments

Membrane-based water treatment processes have been established as a powerful approach for clean water production. However, despite the significant advances made in terms of rejection and flux, provision of sustainable and energy-efficient water production is restricted by the inevitable issue of membrane fouling, known to be the major contributor to the elevated operating costs due to frequent chemical cleaning, increased transmembrane resistance, and deterioration of permeate flux. This review provides an overview of fouling control strategies in different membrane processes, such as microfiltration, ultrafiltration, membrane bioreactors, and desalination via reverse osmosis and forward osmosis. Insights into the recent advancements are discussed and efforts made in terms of membrane development, modules arrangement, process optimization, feed pretreatment, and fouling monitoring are highlighted to evaluate their overall impact in energy- and cost-effective water treatment. Major findings in four key aspects are presented, including membrane surface modification, modules design, process integration, and fouling monitoring. Among the above mentioned anti-fouling strategies, a large part of research has been focused on membrane surface modifications using a number of anti-fouling materials whereas much less research has been devoted to membrane module advancements and in-situ fouling monitoring and control. At the end, a critical analysis is provided for each anti-fouling strategy and a rationale framework is provided for design of efficient membranes and process for water treatment.

Demulsifier-Inspired Superhydrophilic/Underwater Superoleophobic Membrane Modified with Polyoxypropylene Polyoxyethylene Block Polymer for Enhanced Oil/Water Separation Properties

Demulsifiers are considered the key materials for oil/water separation. Various works in recent years have shown that demulsifiers with polyoxypropylen epolyoxyethylene branched structures possess better demulsification effects. In this work, inspired by the chemical structure of demulsifiers, a novel superhydrophilic/underwater superoleophobic membrane modified with a polyoxypropylene polyoxyethylene block polymer was fabricated for enhanced separation of O/W emulsion. First, a typical polyoxypropylene polyoxyethylene triblock polymer (Pluronic F127) was grafted onto the poly styrene-maleic anhydride (SMA). Then, the Pluronic F127-grafted SMA (abbreviated as F127@SMA) was blended with polyvinylidene fluoride (PVDF) for the preparation of the F127@SMA/PVDF ultrafiltration membrane. The obtained F127@SMA/PVDF ultrafiltration membrane displayed superhydrophilic/underwater superoleophobic properties, with a water contact angle of 0° and an underwater oil contact angle (UOCA) higher than 150° for various oils. Moreover, it had excellent separation efficiency for SDS-stabilized emulsions, even when the oil being emulsified was crude oil. The oil removal efficiency was greater than 99.1%, and the flux was up to 272.4 L·m^-2·h^-1. Most importantly, the proposed F127@SMA/PVDF membrane also exhibited outstanding reusability and long-term stability. Its UOCA remained higher than 150° in harsh acidic, alkaline, and high-salt circumstances. Overall, the present work proposed an environmentally friendly and convenient approach for the development of practical oil/water separation membranes.

Investigation on Human Serum Protein Depositions Inside Polyvinylidene Fluoride-Based Dialysis Membrane Layers Using Synchrotron Radiation Micro-Computed Tomography (SR-μCT)

Hemodialysis (HD) membrane fouling with human serum proteins is a highly undesirable process that results in blood activations with further severe consequences for HD patients. Polyvinylidene fluoride (PVDF) membranes possess a great extent of protein adsorption due to hydrophobic interaction between the membrane surface and non-polar regions of proteins. In this study, a PVDF membrane was modified with a zwitterionic (ZW) polymeric structure based on a poly (maleic anhydride-alt-1-decene), 3-(dimethylamino)-1-propylamine derivative and 1,3-propanesultone. Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and zeta potential analyses were used to determine the membrane's characteristics. Membrane fouling with human serum proteins (human serum albumin (HSA), fibrinogen (FB), and transferrin (TRF)) was investigated with synchrotron radiation micro-computed tomography (SR-μCT), which allowed us to trace the protein location layer by layer inside the membrane. Both membranes (PVDF and modified PVDF) were detected to possess the preferred FB adsorption due to the Vroman effect, resulting in an increase in FB content in the adsorbed protein compared to FB content in the protein mixture solution. Moreover, FB was shown to only replace HSA, and no significant role of TRF in the Vroman effect was detected; i.e., TRF content was nearly the same both in the adsorbed protein layer and in the protein mixture solution. Surface modification of the PVDF membrane resulted in increased FB adsorption from both the protein mixture and the FB single solution, which is supposed to be due to the presence of an uncompensated negative charge that is located at the COOH group in the ZW polymer.

Separation Mechanisms and Anti-Fouling Properties of a Microporous Polyvinylidene Fluoride-Polyacrylic Acid-Graphene Oxide (PVDF-PAA-GO) Composite Membrane with Salt and Protein Solutions

This research demonstrates the preparation of composite membranes containing graphene oxide (GO) and investigates the separation mechanisms of various salts and bovine serum albumin (BSA) solutions. A microporous polyvinylidene fluoride-polyacrylic acid-GO (PVDF-PAA-GO) separation layer was fabricated on non-woven support. The GO-incorporating composite resulted in enlarged pore size (0.16 μm) compared with the control membrane (0.12 μm). The zeta potential of the GO composite was reduced to -31 from -19 mV. The resulting membranes with and without GO were examined for water permeability and rejection efficiency with single salt and BSA solutions. Using the non-woven/PVDF-PAA composite, the permeance values were 88-190 kg/m²hMPa, and the salt rejection coefficients were 9-28% for Na₂SO₄, MgCl₂, MgSO₄, and NaCl solutions. These salt removals were based on the Donnan exclusion mechanism considering the ion radii and membrane pore size. Incorporating GO into the separation layer exhibited limited impacts on the filtration of salt solutions, but significantly reduced BSA membrane adhesion and increased permeance. The negatively charged protein reached almost complete removal (98.4%) from the highly negatively charged GO-containing membrane. The GO additive improved the anti-fouling property of the composite membrane and enhanced BSA separation from the salt solution.

Design of Robust FEP Porous Ultrafiltration Membranes by Electrospinning-Sintered Technology

Perfluoropolymer membranes are widely used because of their good environmental adaptability. Herein, the ultrafine fibrous FEP porous membranes were fabricated with electrospinning-sintered technology. The effects of PVA content and sintering temperature on the fabricated membranes’ morphologies and properties were investigated. The results indicate that a kind of dimensionally stable network structure was formed in the obtained ultrafine fibrous FEP porous membranes after sintering the nascent ultrafine fibrous FEP/PVA membranes. The optimal sintering conditions were obtained by comparing the membranes’ performance in terms of membrane morphology, hydrophobicity, mechanical strength, and porosity. When the sintering temperature was 300 °C for 10 min, the porosity, water contact angle, and liquid entry pressure of the membrane were 62.7%, 124.2° ± 2.1°, and 0.18 MPa, respectively. Moreover, the ultrafine fibrous FEP porous membrane at the optimal sintering conditions was tested in vacuum membrane distillation with a permeate flux of 15.1 L·m⁻²·h⁻¹ and a salt rejection of 97.99%. Consequently, the ultrafine fibrous FEP porous membrane might be applied in the seawater desalination field.

Bio-high entropy alloys: Progress, challenges, and opportunities

With the continuous progress and development in biomedicine, metallic biomedical materials have attracted significant attention from researchers. Due to the low compatibility of traditional metal implant materials with the human body, it is urgent to develop new biomaterials with excellent mechanical properties and appropriate biocompatibility to solve the adverse reactions caused by long-term implantation. High entropy alloys (HEAs) are nearly equimolar alloys of five or more elements, with huge compositional design space and excellent mechanical properties. In contrast, biological high-entropy alloys (Bio-HEAs) are expected to be a new bio-alloy for biomedicine due to their excellent biocompatibility and tunable mechanical properties. This review summarizes the composition system of Bio-HEAs in recent years, introduces their biocompatibility and mechanical properties of human bone adaptation, and finally puts forward the following suggestions for the development direction of Bio-HEAs: to improve the theory and simulation studies of Bio-HEAs composition design, to quantify the influence of composition, process, post-treatment on the performance of Bio-HEAs, to focus on the loss of Bio-HEAs under actual service conditions, and it is hoped that the clinical application of the new medical alloy Bio-HEAs can be realized as soon as possible.

Removal of protein, histological dye and tetracycline from simulated bioindustrial wastewater with a dual pore size PPSU membrane

Wastewater from production of active pharmaceutical ingredients (APIs) often contains proteins, azo dyes or antibiotics, which cause severe water eutrophication and growth of drug-resistant bacteria. A series of polyphenylsulfone (PPSU) membranes was prepared to determine the relationships between pore structures and the abilities of different membranes to separate foulants, and the characteristics and performance of the ultrafiltration membranes were investigated. The structure of the skin layer and the cross-sectional texture were converted from dense and finger-like macrovoids to porous sponge shapes because of a delayed liquid-liquid (L-L) demixing time. Formation of novel PPSU membranes via noncovalent bonding interactions was evaluated, and this selectively affected the membrane surface pore structure, layer thickness, surface polarity and electronic repulsive force. All PPSU membranes demonstrated excellent rejection of organic foulants, including bovine serum albumin (BSA) (~100% rejection) and acid red 1 (AR1) (~90% rejection). Additionally, M5 provided an excellent tetracycline (TC) rejection efficiency of 89% in the 1^st cycle. Due to the small size of TC, pore size effects were displayed. Moreover, the pure water flux recovery rate (FRR) increased from 85% (M1, water/ethanol: 100/0) to 99.9% (M4, water/ethanol: 30/70) after BSA filtration because the weak nonsolvent decreased the roughness of the membrane surface, and the membrane made with added EtOH yielded excellent FRR values (99.9%) after AR1 filtration. Therefore, PPSU membranes successfully achieved over 90% rejection of organic foulants and excellent FRRs, indicating that they may be suitable for purifying wastewater from API plants that generate organic foulants with a wide range of sizes.

High Retention and Purification of Bromelain Enzyme (Ananas comosus L. Merrill) from Pineapple Juice Using Plain and Hollow Polymeric Membranes Techniques

The demand for bromelian and pineapple fruit has been increasing substantially in the world because of their benefits for the human health and use in diverse areas. In this context, this work aimed to study the capacity of higher retention (concentration); bromelain activity underwent ultrafiltration from pineapple juice (Ananas comusus L. Merrill). All assays were carried out at pH 7.0 and 7.5, and at 0.05 and 0.40 bar of transmembrane pressures. Results have shown that at the best operating conditions, between 85 and 87% of bromelain activity was recovered using the plain membrane separation process at 0.05 bar. The ultrafiltration has shown the capacity to retain 100% of proteolytic activity of the bromelain extracted. The samples have kept the same physics properties after ultrafiltration, and the result was verified via electrophoresis. The bromelain enzyme obtained was characterized, and pH 7 and between 30 and 40 °C were the best conditions. Therefore, this work shows that the use of both polymeric membranes has shown high efficiency, and can be used in the purification of bromelain enzymes.

Resolving the Tribo-catalytic reaction mechanism for biochar regulated Zinc Oxide and its application in protein transformation

The utilization of mechanical energy to control water pollutants under dark conditions is currently a point of study focus. Herein, biochar -zinc oxide (BC-ZnO) composites with various structures were synthesized by co-pyrolysis of cotton and ZnO at different temperature and used for tribo-catalytic reaction. The introduction of BC can improve charge transmission and separation efficiency. Ultraviolet photoelectron spectra (UPS) and density functional theory (DFT) calculation prove the addition of BC can reduce work function of ZnO, and enhance its electron-donating ability. Specially, suitable adsorption amount is the key factor to improve the tribo-catalytic performance. When the pyrolysis temperature is 600 °C, BC-ZnO has the best degradation efficiency, which can degrade 90% Rhodamine B (RhB) in 75 min, while ZnO can degrade only 38%. On this basis, using bovine serum albumin (BSA) as a model, the effect of tribo-catalytic reaction on controlling proteins in water was studied by fluorescence excitation-emission matrix spectroscopy (3D EEM) and infrared microscope, and the transformation of proteins was further analyzed. This study provides a new strategy to improve the tribo-catalytic performance of ZnO, and explores its application prospects of biological wastewater control.

Influence of UV-irradiation intensity and exposure duration on the hemobiocompatibility enhancement of a novel synthesized phosphobetaine zwitterions polyethersulfone clinical hemodialysis membranes

To improve the biocompatibility of polyethersulfone (PES) membranes utilized for biomedical hemodialysis (HD) applications, surface grafting with hydrophilic polymers has become a reliable modification strategy. Like most photochemical catalyzed reactions, UV-assisted grafting is distinctly advantageous for inducing permanent surface chemistry, enhancing hydrophilicity, improving morphology, and surface charge of membranes. PES membranes may be hydrophilic and chemically stable; however, they also have low protein-binding capacity and very susceptible to fouling and target analyte binding. In this study, novel zwitterionic polymers (PVP-ZW) have been synthesized by UV-assisted grafting PVP to a phosphobetaine monomer in a reaction involving dimethylamino and dioxaphospholane-2-oxide terminal groups in an NVP monomer solution at varying UV exposure conditions. The highlight of the present study is the investigation of the hemocompatibility of coated PES HD membranes at varying UV exposure conditions with respect to membrane chemistry and morphology and its influence on human serum protein adsorption. A clinical investigation of inflammatory biomarker release from incubated coated membranes within uremic blood samples of HD patients reveals they are weak complement and coagulation activators compared to bare PES membrane. The trend of fibrinogen adsorption on coated PES membranes was observed to increase with reducing UV intensity and exposure duration. Fibrinogen adhesion only increased with roughened membrane surfaces, and this also led to the formation of biological activation pathways hindering biocompatibility. Resistance against fibrinogen absorption on zwitterionic modified PES membrane could be linked with the creation of electrostatically induced neutral zwitterionic PVP-phosphobetaine hydration layer with hydrophilic character. Experimental results are accompanied by spectroscopic and morphological imaging evidence. Zwitterion coated PES membranes (PES-PVP-ZW) fabricated from higher UV intensities through longer exposure durations showed significant presence of surface deformations in the forms of inherent exfoliations due to harsh UV reaction conditions. The zeta potential and surface roughness of coated membranes also played significant role in the fibrinogen adsorption on PES membranes during ultrafiltration.