Modification of CO2-selective mixed matrix membranes by a binary composition of poly(ethylene glycol)/NaY zeolite

Enhancement strategies of poly(ether-block-amide) copolymer membranes for CO2 separation: A review

Poly(ether-block-amide) (Pebax) membranes have become the preferred CO2 separation membrane because of their excellent CO2 affinity and robust mechanical resistance. Nevertheless, their development must be considered to overcome the typical obstacles in polymeric membranes, including the perm-selectivity trade-off, plasticization, and physical aging. This article discusses the recent enhancement strategies as a guideline for designing and developing Pebax membranes. Five strategies were developed in the past few years to improve Pebax gas transport properties, including crosslinking, mobile carrier attachment, polymer blending, filler incorporation, and the hybrid technique. Among them, filler incorporation and the hybrid technique were most favorable for boosting CO2/N2 and CO2/CH4 separation performance with a trade-off-free profile. On the other hand, modified Pebax membranes must deal with two latent issues, mechanical strength loss, and perm-selectivity off-balance. Therefore, exploring novel materials with unique structures and surface properties will be promising for further research. In addition, seeking eco-friendly additives has become worthwhile for establishing Pebax membrane sustainable development for gas separation.

Low-cost membrane from polyethylene terephthalate bottle waste for water purification and chromium removal: modification and application

River water has become contaminated with numerous hazardous compounds due to the rapid rise in population and industry expansion. Due to unchecked population growth and the improper disposal of electroplating industrial waste, issues with river water filtration and the elimination of chromium contamination have developed. Various technologies have been developed to overcome these problems. One of the technologies that have been proposed until now is membrane technology. On the other hand, the waste from plastic bottles, which grows yearly and now weighs 381.73 million tons, can create thin films or layers. Therefore, there is a lot of potential in employing plastic bottle trash as a low-cost, sustainable, and eco-friendly membrane material. In this study, the immersion-precipitation phase inversion method was used in the membrane preparation process from plastic bottle waste by modifying fillers (zeolite-NaY) and additives (LiCl and PEG-400) to improve membrane performance. The effect of filler and additive modification on the fabricated membrane was studied for its performance in water purification and chromium ion contaminant removal. The results demonstrated that the modified LiCl membrane performed optimally for water purification and the removal of chromium ions, along with a reduction in turbidity to 1.42 NTU (from 400 NTU) and a 54.75% removal of chromium.

Improved CO2/N2 separation performance of Pebax-1074 blend membranes containing poly(ethylene glycol)

Developing blend membrane material is one feasible and effective route for improving the gas separation efficiency and commercial attractiveness of membrane technologies. Here, free-standing membranes were prepared by casting method using Pebax-1074 as continuous polymer matrix and poly(ethylene glycol) (PEG) as dispersive organic fillers. The morphology, surface functional groups, microstructure and thermal stability of the membranes were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and differential scanning calorimetry, respectively. The effects of preparation variables including average molecular weight and dosage of PEG on the microstructure, morphology and properties of the blend membranes were investigated. In addition, the effects of operation conditions including permeation temperature and permeation pressure on the gas separation performance of the blend membranes were also examined. The results showed that the addition of PEG can obviously modify the structure-properties and significantly improve the separation performance of resultant membranes. Under the conditions of 30°C and 0.25 MPa, the optimal CO2 permeability and CO2/N2 selectivity respectively reached to 124.3Barrer and 115.8 for the blend membranes made by PEG600 with a content of 20% in Pebax-1074 matrix. In brief, the as-prepared blend membranes are proved to be promising for CO2/N2 separation application.

Preparation of Pebax 1657/MAF-7 Mixed Matrix Membranes with Enhanced CO2/N2 Separation by Active Site of Triazole Ligand

Fillers play a critical role in the performance of mixed matrix membranes (MMMs). Microporous metal azolate frameworks (MAFs) are a subclass material of metal-organic frameworks (MOFs). Due to the uncoordinated nitrogen of the organic ligands, MAF-7 (SOD-[Zn(mtz)₂], Hmtz = 3-methyl-1,2,4-triazole, window: d = 0.34 nm) shows excellent CO₂ adsorption performance. In this work, Pebax 1657/MAF-7 MMMs were prepared by a sample solution casting method with MAF-7 particles as fillers for the first time. By means of X-ray diffraction (XRD), scanning electron microscope (SEM), infrared radiation (IR), and thermogravimetry (TG), the compositional and structural properties of the mixed matrix membrane with different filler content were analyzed. The results show that the compatibility of MAF-7 and Pebax is good with a filler content of 5 wt.%. The pure gas testing showed that mixed matrix membrane has a high ideal CO₂/N₂ selectivity of 124.84 together with a better CO₂ permeability of 76.15 Barrer with the optimized filler content of 5 wt.%. The obtained membrane showed 323.04% enhancement in selectivity of CO₂/N₂ and 27.74% increase in the permeability of CO₂ compared to the pristine membrane at 25 °C and 3 bar. The excellent separation performance may be due to the ligands that can afford a Lewis base active site for CO₂ binding with the uniform dispersion of MAF-7 particles in Pebax and the favorable interface compatibility. The obtained membrane overcomes the Robeson's upper bound in 2008 for CO₂/N₂ separation. This work provides a new strategy by utilizing MAFs as fillers with triazole ligand to enhance the gas separation performance of mixed matrix membranes.

A Review of the Recent Progress in the Development of Nanocomposites Based on Poly(ether-block-amide) Copolymers as Membranes for CO2 Separation

An inspiring challenge for membrane scientists is to exceed the current materials' performance while keeping the intrinsic processability of the polymers. Nanocomposites, as mixed-matrix membranes, represent a practicable response to this strongly felt need, since they combine the superior properties of inorganic fillers with the easy handling of the polymers. In the global strategy of containing the greenhouse effect by pursuing a model of sustainable growth, separations involving CO2 are some of the most pressing topics due to their implications in flue gas emission and natural gas upgrading. For this purpose, Pebax copolymers are being actively studied by virtue of a macromolecular structure that comprises specific groups that are capable of interacting with CO2, facilitating its transport with respect to other gas species. Interestingly, these copolymers show a high versatility in the incorporation of nanofillers, as proved by the large number of papers describing nanocomposite membranes based on Pebax for the separation of CO2. Since the field is advancing fast, this review will focus on the most recent progress (from the last 5 years), in order to provide the most up-to-date overview in this area. The most recent approaches for developing Pebax-based mixed-matrix membranes will be discussed, evidencing the most promising filler materials and analyzing the key-factors and the main aspects that are relevant in terms of achieving the best effectiveness of these multifaceted membranes for the development of innovative devices.

Recent Advances in Polymer-Inorganic Mixed Matrix Membranes for CO2 Separation

Since the second industrial revolution, the use of fossil fuels has been powering the advance of human society. However, the surge in carbon dioxide (CO2) emissions has raised unsettling concerns about global warming and its consequences. Membrane separation technologies have emerged as one of the major carbon reduction approaches because they are less energy-intensive and more environmentally friendly compared to other separation techniques. Compared to pure polymeric membranes, mixed matrix membranes (MMMs) that encompass both a polymeric matrix and molecular sieving fillers have received tremendous attention, as they have the potential to combine the advantages of both polymers and molecular sieves, while cancelling out each other's drawbacks. In this review, we will discuss recent advances in the development of MMMs for CO2 separation. We will discuss general mechanisms of CO2 separation in an MMM, and then compare the performances of MMMs that are based on zeolite, MOF, metal oxide nanoparticles and nanocarbons, with an emphasis on the materials' preparation methods and their chemistries. As the field is advancing fast, we will particularly focus on examples from the last 5 years, in order to provide the most up-to-date overview in this area.