Sealing Tröger base/ZIF-8 mixed matrix membranes defects for improved gas separation performance

Antimicrobial polymer-based zeolite imidazolate framework composite membranes for uranium extraction from wastewater and seawater

Extraction uranium (VI) (U(VI)) from wastewater and seawater is highly important for environmental protection and life safety, but it remains a great challenge. In this work, the growth of the zeolitic imidazolate framework-8 (ZIF-8) nanoparticles on the tannic acid (TA)-3-aminopropyltriethoxysilane (APTES) modified PVDF (TAP) membrane was designed to obtain an excellent U(VI) adsorbent. The zeolite imidazolate framework composite membrane (TAPP-ZIF-60) was prepared through polyethyleneimine (PEI) bridging strategy and temperature regulation strategy in solvothermal method. The coordination bond between PEI and ZIF-8 and the covalent bond between PEI and TAP are essential in forming stable composite membrane. TAPP-ZIF with different properties was synthesized through a temperature regulation process and the TAPP-ZIF prepared at 60 °C has the uniform morphology and good performance. The adsorption capacity of TAPP-ZIF-60 is 153.68 mg/g (C0 = 95.01 mg/L and pH = 8.0) and water permeability is 5459 L m-2 h-1 bar-1. After ten adsorption-desorption cycles, it is proved that TAPP-ZIF-60 has good repeatability and stability. In addition, the TAPP-ZIF-60 composites membrane has a good inhibitory effect on Staphylococcus aureus and Escherichia coli. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) analysis reveal that the coordination between TAPP-ZIF-60 and uranyl ions is the primary factor contributing to the high adsorption capacity.

Synergistic Construction of Sub-Nanometer Channel Membranes through MOF-Polymer Composites: Strategies and Nanofiltration Applications

The selective separation of small molecules at the sub-nanometer scale has broad application prospects in the field, such as energy, catalysis, and separation. Conventional polymeric membrane materials (e.g., nanofiltration membranes) for sub-nanometer scale separations face challenges, such as inhomogeneous channel sizes and unstable pore structures. Combining polymers with metal-organic frameworks (MOFs), which possess uniform and intrinsic pore structures, may overcome this limitation. This combination has resulted in three distinct types of membranes: MOF polycrystalline membranes, mixed-matrix membranes (MMMs), and thin-film nanocomposite (TFN) membranes. However, their effectiveness is hindered by the limited regulation of the surface properties and growth of MOFs and their poor interfacial compatibility. The main issues in preparing MOF polycrystalline membranes are the uncontrollable growth of MOFs and the poor adhesion between MOFs and the substrate. Here, polymers could serve as a simple and precise tool for regulating the growth and surface functionalities of MOFs while enhancing their adhesion to the substrate. For MOF mixed-matrix membranes, the primary challenge is the poor interfacial compatibility between polymers and MOFs. Strategies for the mutual modification of MOFs and polymers to enhance their interfacial compatibility are introduced. For TFN membranes, the challenges include the difficulty in controlling the growth of the polymer selective layer and the performance limitations caused by the "trade-off" effect. MOFs can modulate the formation process of the polymer selective layer and establish transport channels within the polymer matrix to overcome the "trade-off" effect limitations. This review focuses on the mechanisms of synergistic construction of polymer-MOF membranes and their structure-nanofiltration performance relationships, which have not been sufficiently addressed in the past.

Synthesis of ZIF-8 tubular membrane via solvent evaporation seeding coupled with microwave assisted heating method for separation of small molecule gases

In this work, we systematically study the performance of tubular ZIF-8 membranes in the separation of small molecules including H₂, CO₂, N₂ and CH_4. The tubular ZIF-8 membranes were synthesized on α-alumina support via novel dual approach known as solvent evaporation seeding coupled with microwave assisted growth. The durations for the growth of the seed layer through solvent evaporation and membrane layer via microwave heating were varied. The crystallinity and morphology of the resultant membranes were evaluated by using XRD, SEM and IFM analyses. The performance of the resultant tubular ZIF-8 membranes was assessed for small molecule gases permeation at various pressures and temperatures. Highest flux ranging from 0.02 to 0.61 mol/m²s were obtained for gases CO₂, CH₄, N₂, and H₂ at feed pressure of 10 bar, whereas highest ideal selectivity of 12.4, 9.3 and 6.9 were obtained for H₂/CH_4, CO₂/CH₄, N₂/CH₄, respectively, at feed pressure of 10 bar and temperature of 30 °C. This work reveals that the tubular ZIF-8 membrane can be synthesized via a feasible and reproducible solvent evaporation seeding coupled with microwave assisted growth method, which can be further explored for the upscaling of the ZIF-8 tubular membrane in pilot scale for gas separation application.

Constructing Dual-Transport Pathways by Incorporating Beaded Nanofillers in Mixed Matrix Membranes for Efficient CO2 Separation

Mixed matrix membranes (MMMs) have attracted significant attention in the field of CO₂ separation because MMMs have potential to overcome an undesirable "trade-off" effect. In this study, the beaded nanofillers of ZIF-8@aminoclay (ZIF-8@AC) were synthesized using an in situ growth method, and they were doped into a Pebax MH 1657 (Pebax) matrix to fabricate MMMs for efficient CO₂ separation. The beaded structure was formed by ZIF-8 particles joined together during the process of AC coating on the ZIF-8 surface. ZIF-8@AC played a vital role in the improvement of gas separation performance. It was mainly attributed to the following reasons: First, the inherent micropores of ZIF-8 constructed the internal pathways for gas transport in the beaded nanofillers, benefiting the improvement of gas permeability. Second, the staggered AC layers constructed the external pathways for gas transport in the beaded nanofillers, increasing the tortuosity of gas transport for larger molecules and favoring the improvement of gas selectivity. Therefore, the internal and external pathways of ZIF-8@AC co-constructed the dual-transport pathways for CO₂ transport in MMMs. In addition, the abundant amino groups of the beaded nanofillers provided abounding carriers for CO₂, facilitating CO₂ transport in the dual-transport pathways. Therefore, the CO₂ separation performance of Pebax/ZIF-8@AC-1 MMMs was significantly improved. The CO₂ permeability and CO₂/CH₄ separation factor of Pebax/ZIF-8@AC-1-7 MMM were 620 ± 10 Barrer and 40 ± 0.4, which were 2.3 and 1.6 times those of a pure Pebax membrane, respectively. Furthermore, the CO₂/CH₄ separation performance of Pebax/ZIF-8@AC-1-7 MMM overcame successfully the "trade-off" effect and approached the 2019 upper bound. It is a novel strategy to design a beaded nanofiller doped into MMMs for carbon capture.

Metal-Organic Frameworks (MOFs)-Based Mixed Matrix Membranes (MMMs) for Gas Separation: A Review on Advanced Materials in Harsh Environmental Applications

The booming of global environmental awareness has driven the scientific community to search for alternative sustainable approaches. This is accentuated in the 13th sustainable development goal (SDG13), climate action, where urgent efforts are salient in combating the drastic effects of climate change. Membrane separation is one of the indispensable gas purification technologies that effectively reduces the carbon footprint and is energy-efficient for large-scale integration. Metal-organic frameworks (MOFs) are recognized as promising fillers embedded in mixed matrix membranes (MMMs) to enhance gas separation performance. Tremendous research studies on MOFs-based MMMs have been conducted. Herein, this review offers a critical summary of the MOFs-based MMMs developed in the past 3 years. The basic models to estimate gas transport, preparation methods, and challenges in developing MMMs are discussed. Subsequently, the application and separation performance of a variety of MOFs-based MMMs including those of advanced MOFs materials are summarized. To accommodate industrial needs and resolve commercialization hurdles, the latest exploration of MOF materials for a harsh operating condition is emphasized. Along with the contemplation on the outlook, future perspective, and opportunities of MMMs, it is anticipated that this review will serve as a stepping stone for the coming MMMs research on sustainable and benign environmental application.