Preparation and decontamination performance of a flexible self-standing hydrogel photocatalytic membrane

A comprehensive review on the inherent and enhanced antifouling mechanisms of hydrogels and their applications

Biofouling remains a persistent challenge within the domains of biomedicine, tissue engineering, marine industry, and membrane separation processes. Multifunctional hydrogels have garnered substantial attention due to their complex three-dimensional architecture, hydrophilicity, biocompatibility, and flexibility. These hydrogels have shown notable advances across various engineering disciplines. The antifouling efficacy of hydrogels typically covers a range of strategies to mitigate or inhibit the adhesion of particulate matter, biological entities, or extraneous pollutants onto their external or internal surfaces. This review provides a comprehensive review of the antifouling properties and applications of hydrogels. We first focus on elucidating the fundamental principles for the inherent resistance of hydrogels to fouling. This is followed by a comprehensive investigation of the methods employed to enhance the antifouling properties enabled by the hydrogels' composition, network structure, conductivity, photothermal properties, release of reactive oxygen species (ROS), and incorporation of silicon and fluorine compounds. Additionally, we explore the emerging prospects of antifouling hydrogels to alleviate the severe challenges posed by surface contamination, membrane separation and wound dressings. The inclusion of detailed mechanistic insights and the judicious selection of antifouling hydrogels are geared toward identifying extant gaps that must be bridged to meet practical requisites while concurrently addressing long-term antifouling applications.

Preparation of modified humic acid/TiO2/P(AA-co-AM) nanocomposite hydrogels with enhanced dye adsorption and photocatalysis

A novel composite hydrogel with exceptional adsorption and photocatalytic properties was synthesized using modified coal-based humic acid (HA-C), modified titanium dioxide (TiO2) nanoparticles, acrylic acid (AA), and acrylamide (AM) as precursors. The modification of HA-C and TiO2 significantly enhances the structural support provided by the hydrogel for photocatalytic components. Moreover, we investigated the effects of monomer ratio, dye concentration, temperature, and pH on the material properties. Additionally, we tested the mechanical strength, swelling behavior, and reusability of the hydrogels. The composite hydrogel's adsorption performance and synergistic adsorption-photocatalytic performance were evaluated based on its removal rate for both absorbed and degraded methylene blue (MB). Remarkably, incorporating HA-C greatly improved the adsorption efficiency of the composite hydrogel for methylene blue to a maximum capacity of 1490 mg g-1. Furthermore, TiO2 nanoparticles in the structure promoted MB degradation with an efficiency exceeding 96.5%. The hydrogel exhibited excellent recoverability and reusability through nine cycles of adsorption/desorption as well as six cycles of degradation.

ZnO-Ti3C2TX composites supported on polyacrylic acid/chitosan hydrogels as high-efficiency and recyclable photocatalysts for norfloxacin degradation

Photocatalysts immobilized on hydrogels is a win-win mode, which not only improves photocatalysis but also successfully prevents catalyst loss, making it easy to separate and reuse during catalytic process. Here, ZnO-Ti3C2TX photocatalysts are loaded into the chitosan/polyacrylic acid hydrogel networks, realizing the efficiently photocatalytic degradation of norfloxacin. The chitosan-based composite hydrogel features rich functional groups and a dense pore structure, which is beneficial to antibiotic enrichment and photocatalytic degradation. The effects of different catalyst ratios, dosage, initial concentrations and pH on the degradation efficiency are investigated. The norfloxacin degradation rate constant is 0.012 min-1 and its degradation efficiency reaches up to 90 % after 240 min. Importantly, the photocatalytic composite hydrogel still retains 85 % degradation efficiency after 6 cycles. Moreover, e- plays a significant role in the degradation process. This work converts the traditional powder photocatalysts into bulk photocatalysts (photocatalytic hydrogels) to accomplish efficient degradation and rapid recycling for contaminant removal.

Multifunctional Ti3C2Tx MXene/Silver Nanowire Membranes with Excellent Catalytic, Antifouling, and Antibacterial Properties for Nitrophenol-Containing Water Purification

The uncontrolled release of nitrophenol and dye pollutants into water systems is an increasingly serious worldwide concern, and thus efficient wastewater treatment technologies are urgently needed. Herein we report a novel two-dimensional (2D) transition metal carbides and/or nitrides (Ti3C2Tx MXene) membrane modified with silver nanowires (AgNWs) by vacuum assisted filtration technology for the ultrafast nitrophenol catalysis and water purification applications. Regular and controllable membrane transport channels were constructed by stacking Ti3C2Tx MXene nanosheets. Furthermore, the intercalation of AgNWs into the Ti3C2Tx MXene interlayer greatly enlarged the interlayer spacing, resulting in more gaps for fast and selective molecular transport. The optimized Ti3C2Tx MXene@AgNWs (M@A) membrane exhibited a water flux up to ∼191.9 L/(m2 h) while maintaining a high bovine serum albumin (BSA) rejection of ∼95.4%. We emphatically used M@A membranes as efficient catalysts for the reduction of 4-nitrophenol (4-NP), and the results indicated that M@A-12% membrane exhibited the greatest catalytic reduction ability, and recycling utilization. M@A-12% membrane also had an antibacterial rate of more than 99% against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). This work provides a possibility to expand the application of 2D multifunctional M@A membranes in wastewater treatment and pollutant catalytic degradation.

Photocatalytic hydrogel film assisted forward osmosis (PFO) for water treatment: Sustainable performance and contaminant control

The integration of catalytic oxidation with forward osmosis (FO) holds promising potential to address two crucial challenges encountered by FO: fouling and unsustainable performance, but suitable approaches are still rare. Herein, we have successfully developed a photocatalysis-assisted forward osmosis (PFO) system. In the PFO, a self-made porous carbon nitride doped functional carbon nanotube photocatalytic hydrogel film (PCN@CNTM) was engaged in the FO process in an inventive way by simply sticking to the commercial FO membrane surface, preventing damage to the membrane from the catalyst's direct insertion and delaying the assault from the oxidation groups. PFO allowed organic pollutants to decompose in the feed solution (90%) and on the membrane surface, regulating the water chemical potential and giving the FO membrane antifouling properties. This resulted in sustainable water flux (11.8 LMH) with no significant membrane fouling in PFO, whereas in FO alone there was a significant fouling and flux drop (from 12.73 to 7.23 LMH in 4 h). Moreover, the expensive FO membrane was protected while the hydrogel film can be replaced on demand. The PFO exemplifies the concept of synergistic technology integration, presenting a new perspective on harnessing the strengths of distinct technologies in a mutually beneficial manner.

The collaborative incentive effect in adsorption-photocatalysis: A special perspective on phosphorus recovery and reuse

Achieving efficient recovery and direct utilization of phosphorus as one of the important components of the green economy is a huge challenge. Herein, we innovatively constructed a coupling adsorption-photocatalytic (CAP) process using synthetic dual-functional Mg-modified carbon nitride (CN-MgO). The CAP could utilize the recovered phosphorus from wastewater to promote the in-situ degradation of refractory organic pollutants via CN-MgO, where its phosphorus adsorption capacity and photocatalytic activity were significantly and synergistically increased. It was specifically reflected in the high phosphorus adsorption capacity of CN-MgO (218 mg/g), which was 153.5 times that of carbon nitride (1.42 mg/g), and its theoretical maximum adsorption capacity could reach 332 mg P/g. Subsequently, the phosphorus-enriched sample (CN-MgO-P) was employed as a photocatalyst to remove tetracycline with a reaction rate (k = 0.07177 min-1) 2.33 times higher than that of carbon nitride (k = 0.0327 min-1). Notably, the coordinated incentive mechanism present in this CAP between adsorption and photocatalysis may be attributed to the more adsorption sites of CN-MgO and the facilitation of hydroxyl production through adsorbed phosphorus, which ensured the feasibility of creating environmental value from the phosphorus in wastewater by means of CAP. This study provides a new perspective on the recovery and reuse of phosphorus resources in wastewater and the integration of environmental technologies in multiple fields.