Efficient photocatalysis improves the self-cleaning property of the superwetting nanofibrous membrane toward emulsified oily wastewater

Photocatalytic PAN Nanofibrous Membrane through Anchoring a Nanoflower-Branched CoAl-LDH@PANI Heterojunction for Organic Hazards Degradation and Oil-Containing Emulsified Wastewater Separation

The synergistic treatment of oily wastewater containing organic hazards and emulsified oils remains a big challenge for membrane separation technology. Herein, the photocatalytic membrane, which combined the physical barrier and catalytic oxidation-driven degradation functionality, was fabricated via anchoring a nanoflower-branched CoAl-LDH@PANI Z-scheme heterojunction onto a porous polyacrylonitrile mat and using tannic acid as an adhesive. The assembly of such a Z-scheme heterojunction offered the superior photocatalytic degradation performance of soluble dyes and tetracycline (up to 94.3%) to the membrane with the improved photocatalytic activity of 2.33 times compared with the CoAl-LDH@pPAN membrane. Quenching experiments suggested that the •O2- was the most reactive oxygen species in the catalytic reaction system of the composite membrane. The greatly enhanced photocatalytic activity was attributed to the effective inhibition of photogenerated hole-electron combination using PANI as a carrier, with charge transferring from LDH to PANI. The possible photocatalytic degradation mechanism was proposed based on VB-XPS, electron spin resonance spectroscopy, and DRS technologies, which was confirmed by density functional theory calculation. Meanwhile, benefiting from the superhydrophilic/oleophobic feature and low oil adhesion, the membrane exhibited high permeability for isooctane emulsion (3990.39 L·m-2·h-1), high structure stability, and satisfactory cycling performance. This work provided a strategy to develop superwetting and photocatalytic composite membranes for treating complex multicomponent pollutants in the chemical industry.

Superhydrophilic Photothermal-Responsive CuO@MXene Nanofibrous Membrane with Inherent Biofouling Resistance for Treating Complex Oily Wastewater

MXene, a recently emerged 2D material, has garnered substantial attention for a myriad of applications. Despite the growing interest, there remains a noticeable gap in exploring MXene-based membranes for the simultaneous achievement of photomodulated oil/water separation, bacterial resistance, and the removal of pollutants in the treatment of oily wastewater. In this work, we have successfully synthesized a novel multifunctional CuO@MXene-PAN nanofibrous membrane (NFM) featuring unique nanograin-like structures. Benefitting from these unique structures, the resultant membrane shows excellent superwetting properties, significantly enhancing its performance in oil/water separation. In addition, the membrane's photothermal property boosts its permeance by 40% under visible light illumination within 30 min. Furthermore, the resultant membrane shows decent dye removal efficiency in an aqueous solution, e.g., Rhodamine B (RhB), promoting efficient degradation with high reusability under visible light. Most remarkably, the resultant membrane exhibits superior anti-biofouling capability and consistently resists the adhesion of microorganisms such as cyanobacteria over a 14 day period. Thus, the combined effect of superior superwetting properties, photothermal responsivity, photocatalytic activity, and the antibacterial effect in CuO@MXene-PAN NFM contributes to the efficient treatment of intricate oily wastewater. This synergistic combination of superior properties in the membrane could be an appealing strategy for the broad development of multifunctional materials to prevent fouling during actual separation performance.

An eco-friendly construction of superwetting alginate-based aerogels with self-cleaning performance for multifunctional water treatment

The increasingly complex oily wastewater has become a severe environmental issue worldwide, calling for the eco-friendly methods toward multifunctionality, high efficiency and sustainability. This work presents a superwetting alginate-based aerogels prepared by a feasible mineralization without the assistance of intermediates. In this strategy, in-situ grown β-FeOOH nanoparticles on whole porous alginate aerogels, not only provides the hierarchical topography and more -OH groups, enhancing underwater oleophobicity (152 ± 4.4°) and fouling resistance of porous aerogels, but also endows with the outstanding photo-Fenton self-cleaning ability for pollutant degradation. As a result, the outstanding separation selectivity for oil and water (>99.5 %), and superior reusability is achieved without the significant diminution of permeation ability (897-1136 L·m-2·h-1). Furthermore, with the advantage of excellent photocatalytic performance under sunlight, the oily wastewater containing soluble organic pollutants can be remediated by simultaneous separation and photocatalysis decomposition under a gravity-driven filtration solely, revealing a promising potential for complex oily wastewater treatment with the rationally usage of sunlight.

Applications of graphene oxide (GO) in oily wastewater treatment: Recent developments, challenges, and opportunities

The treatment of oily wastewater has become a serious environmental challenge, for which graphene oxide has emerged as a promising material in solving the problem. The ever-growing utilization of graphene oxide (GO) in the treatment of oily wastewater necessitates a constant review. This review article employs a comprehensive literature survey methodology, systematically examining peer-reviewed articles, focusing on, but not entirely limited to, the last five years. Major databases such as EBSCOhost, Scopus, ScienceDirect, Web of Science and Google Scholar were searched using specific keywords related to GO and oily wastewater treatment. The inclusion criteria focused on studies that specifically address the application, efficiency, and mechanisms of GO in treating oily wastewater. The data extracted from these sources were then synthesized to highlight the most important developments, challenges, and prospects in this field. As far as oily wastewater treatment is concerned, the majority of the studies revolve around the use of GO in mitigating fouling in membrane processes, improving the stability, capacity and reusability of sorbents, and enhancing photodegradation by minimizing charge recombination.

A comprehensive review on state-of-the-art antifouling super(wetting and anti-wetting) membranes for oily wastewater treatment

One of the most dangerous types of pollution to the environment is oily wastewater, which is produced from a number of industrial sources and can cause damage to the environment, people, and creatures. To overcome this issue, membrane technology as an advanced method has been considered for treating oily wastewater due to its stability, high removal efficiency, and simplicity in scaling up. Membrane fouling, or the accumulation of oil droplets at or within the membrane pores, compromises the efficiency of membrane separation and water flux. In the last decade, the fabrication of membranes with specific wettability to reduce fouling has received much consideration. The purpose of this article is to offer a literature overview of all fabricated anti-fouling super(wetting and anti-wetting) membranes for applicable membrane processes for the separation of immiscible and emulsified oil/water mixtures. In this review, we first explain membrane fouling and discuss methods for preventing it. Afterwards, in all membrane separation processes, including pressure-driven, gravity-driven, and thermal-driven, membranes based on the form and density of oil are categorized as oil-removing or water-removing with special wettability, and then their wettability modification with different materials is particularly discussed. Finally, the prospect of anti-fouling membrane fabrication in the future is presented.

A comprehensive review on the behavior and evolution of oil droplets during oil/water separation by membranes

Membrane separation technology has significant advantages for treating oil-in-water emulsions. Understanding the evolution of oil droplets could reveal the interfacial and colloidal interactions, facilitate the design of advanced membranes, and improve the separation performances. This review on the characteristic behavior and evolution of oil droplets focuses on the advanced analytical techniques, and the subsequent fouling as well as demulsification effects during membrane separation. A detailed introduction is provided on microscopic observations and numerical simulations of the dynamic evolution of oil droplets, featuring real-time in-situ visualization and accurate reconstruction, respectively. Characteristic behaviors of these oil droplets include attachment, pinning, wetting, spreading, blockage, intrusion, coalescence, and detachment, which have been quantified by specific proposed parameters and criteria. The fouling process can be evaluated using Hermia and resistance models. The related adhesion force and intrusion pressure as well as droplet-droplet/membrane interfacial interactions can be accurately quantified using various force analysis methods and advanced force measurement techniques. It is encouraging to note that oil coalescence has been achieved through various effects such as electrostatic interactions, mechanical actions, Laplace pressure/surface free energy gradients, and synergistic effects on functional membranes. When oil droplets become destabilized and coalesce into larger ones, the functional membranes can overcome the limitations of size-sieving effect to attain higher separation efficiency. This not only bypasses the trade-off between permeability and rejection, but also significantly reduces membrane fouling. Finally, the challenges and potential research directions in membrane separation are proposed. We hope this review will support the engineering of advanced materials for oil/water separation and research on interface science in general.

Adsorption-Controlled Wettability and Self-Cleaning of TiO2

Molecular adsorption on solids is inevitable and has significant influences on the wettability of materials, while the tuning mechanism of the wettability from molecular adsorption is yet to be understood. Using molecular dynamics (MD) simulations, we comprehensively studied the relation between the wettability of the TiO₂ surface and the adsorption of water and carboxylic acid molecules. Our results reveal that the increasing amount of surface hydroxyl groups from the decomposition adsorption of H₂O increases the hydrophilicity of TiO₂, providing molecular-level evidence for the previously proposed mechanism of photo-induced hydrophilicity. By contrast, the surface wettability becomes tunable with water contact angles changing from 0 to ∼130° through length adjustment of the adsorbed carboxylic acids. The TiO₂ surface is hydrophilic with the adsorption of short-alkyl-chain carboxylic acids (e.g., HCOOH) and becomes hydrophobic when longer-alkyl-chain carboxylic acids (H(CH₂)_nCOOH, n > 2) are present. Furthermore, long-alkyl-chain acids also increase surface oleophilicity, while the adsorption of HCOOH and CH₃COOH significantly enhances the oleophobicity of TiO₂. Water molecules can also more easily penetrate the space between oily contaminants and adsorbed short acid molecules, thereby further increasing its self-cleaning capacity. The present simulations not only reveal the mechanism of wettability caused by molecular adsorption but also provide a promising method to create materials with controllable wettability and high self-cleaning efficiency.