Strategy to prepare skin-free and macrovoid-free polysulfone membranes via the NIPS process

Enhanced porous membrane fabrication using cellulose acetate and citric acid: Improved structural integrity, thermal stability, and gas permeability

In this study, our primary objective was to enhance the properties of porous membranes by addressing the limitations associated with phase separation. We employed a non-solvent induced phase separation (NIPS) method, utilizing cellulose acetate (CA) in conjunction with citric acid to fabricate these membranes. Citric acid played a dual role: ensuring a uniform pore structure and cross-linking the CA polymer, thereby enhancing its mechanical strength. This approach resulted in the development of a more robust membrane with superior structural integrity. Thermogravimetric analysis (TGA) confirmed enhanced thermal stability, particularly up to 150 °C, as a result of citric acid's cross-linking effect. Beyond 150 °C, the decomposition temperatures of the CA/citric acid membrane were found to be comparable to those of pure CA. Remarkably, a CA/citric acid ratio of 1:0.05 exhibited the slowest decomposition rate as the temperature increased. Scanning electron microscopy (SEM) examination unveiled a sponge-like membrane structure with numerous evenly distributed fine pores. Through the use of citric acid as a plasticizer, we were able to effectively control the penetration of water molecules, preventing the formation of macrovoids and promoting the creation of fine pores. This resulted in the fabrication of a high-porosity membrane, boasting an impressive porosity measurement of 84.9 %. Furthermore, measurements of the Gurley value confirmed efficient gas permeation, a critical characteristic for applications requiring effective gas transport. Fourier transform infrared (FT-IR) spectroscopy attested to the presence of citric acid in the membrane post-phase separation, indicating its successful integration. Our work presents a novel approach to enhance porous membranes, providing improvements in mechanical strength, thermal stability, and gas permeability. These findings offer valuable insights for the development of advanced materials with diverse applications in various fields.

In Situ Incorporation of TiO2@Graphene Oxide (GO) Nanosheets in Polyacrylonitrile (PAN)-Based Membranes Matrix for Ultrafast Protein Separation

Organic polymeric ultrafiltration (UF) membranes have been widely used in protein separation due to their advantages of high flux and simple manufacturing process. However, due to the hydrophobic nature of the polymer, pure polymeric UF membranes need to be modified or hybrid to increase their flux and anti-fouling performance. In this work, tetrabutyl titanate (TBT) and graphene oxide (GO) were simultaneously added to the polyacrylonitrile (PAN) casting solution to prepare a TiO₂@GO/PAN hybrid ultrafiltration membrane using a non-solvent induced phase separation (NIPS). During the phase separation process, TBT underwent a sol-gel reaction to generate hydrophilic TiO₂ nanoparticles in situ. Some of the generated TiO₂ nanoparticles reacted with the GO through a chelation interaction to form TiO₂@GO nanocomposites. The resulting TiO₂@GO nanocomposites had higher hydrophilicity than the GO. They could selectively segregate towards the membrane surface and pore walls through the solvent and non-solvent exchange during the NIPS, significantly improving the membrane's hydrophilicity. The remaining TiO₂ nanoparticles were segregated from the membrane matrix to increase the membrane's porosity. Furthermore, the interaction between the GO and TiO₂ also restricted the excessive segregation of the TiO₂ nanoparticles and reduced their losing. The resulting TiO₂@GO/PAN membrane had a water flux of 1487.6 L·m^-2·h^-1 and a bovine serum albumin (BSA) rejection rate of 99.5%, which were much higher than those of the currently available UF membranes. It also exhibited excellent anti-protein fouling performance. Therefore, the prepared TiO₂@GO/PAN membrane has important practical applications in the field of protein separation.

Phase-Field Simulation of the Effect of Coagulation Bath Temperature on the Structure and Properties of Polyvinylidene Fluoride Microporous Membranes Prepared by a Nonsolvent-Induced Phase Separation

We used the phase-field model of the existing Nonsolvent Induced Phase Separation (NIPS) method to add the variable of temperature in simulating the changes in the process of membrane formation. The polyvinylidene fluoride (PVDF) membrane system was applied to examine the influence of coagulation bath temperature change on the skin-sublayer of the membrane structure, thereby elucidating the development process of membrane structure under different conditions and shedding light on the most suitable coagulation bath temperature ranges. It was found that as coagulation bath temperature increased, the number of interface pores in the outer skin layer decreased, but the size increased. As a result, it changed from the crack shape to round-hole shape, thus making the pore structure looser. In the sublayer, the mesh support structure was increased, which enhanced the mechanical strength of the membrane. Relevant experiments also verify the effectiveness of the model.