Experimental data on the removal of phenol by electro-H2O2 in presence of UV with response surface methodology

Bisphenol A adsorption using modified aloe vera leaf-wastes derived bio-sorbents from aqueous solution: kinetic, isotherm, and thermodynamic studies

Reactive-oxygen-species are produced more often in the body when bisphenol A (BPA), an endocrine-disrupting-substance, is present. In this investigation, bio-sorbents from an aqueous solution adapted from Aloe-vera were used to survey BPA removal. Aloe-vera leaf wastes were used to create activated carbon, which was then analyzed using Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Zeta potential, and Brunauer-Emmett-Teller (BET) techniques. It was revealed that the adsorption process adheres to the Freundlich isotherm model with R2>0.96 and the pseudo-second-order kinetic model with R2>0.99 under ideal conditions (pH = 3, contact time = 45 min, concentration of BPA = 20 mg.L-1, and concentration of the adsorbent = 2 g.L-1). After five-cycle, the efficacy of removal was greater than 70%. The removal of phenolic-chemicals from industrial-effluent can be accomplished with the assistance of this adsorbent in a cost-effective and effective-approach.

Electrochemical-based approaches for the treatment of pharmaceuticals and personal care products in wastewater

In recent times, emerging contaminants (ECs) like pharmaceuticals and personal care products (PPCPs) in water and wastewater have become a major concern in the environment. Electrochemical treatment technologies proved to be more efficient to degrade or remove PPCPs present in the wastewater. Electrochemical treatment technologies have been the subject of intense research for the past few years. Attention has been given to electro-oxidation and electro-coagulation by industries and researchers, indicating their potential to remediate PPCPs and mineralization of organic and inorganic contaminants present in wastewater. However, difficulties arise in the successful operation of scaled-up systems. Hence, researchers have identified the need to integrate electrochemical technology with other treatment technologies, particularly advanced oxidation processes (AOPs). Integration of technologies addresses the limitation of indiviual technologies. The major drawbacks like formation of undesired or toxic intermediates, s, energy expenses, and process efficacy influenced by the type of wastewater etc., can be reduced in the combined processes. The review discusses the integration of electrochemical technology with various AOPs, like photo-Fenton, ozonation, UV/H2O2, O3/UV/H2O2, etc., as an efficient way to generate powerful radicals and augment the degradation of organic and inorganic pollutants. The processes are targeted for PPCPs such as ibuprofen, paracetamol, polyparaben and carbamezapine. The discussion concerns itself with the various advantages/disadvantages, reaction mechanisms, factors involved, and cost estimation of the individual and integrated technologies. The synergistic effect of the integrated technology is discussed in detail and remarks concerning the prospects subject to the investigation are also stated.

Heterogeneous Sono-Fenton like catalytic degradation of metronidazole by Fe3O4@HZSM-5 magnetite nanocomposite

In this research, Fe₃O₄@HZSM-5 magnetic nanocomposite was synthesized via a coprecipitation method for metronidazole (MNZ) degradation from aqueous solutions under ultrasonic irradiation which showed superb sonocatalytic activity. The synthesized magnetite nanocomposite was characterized by using field-emission scanning electron microscope-energy dispersive X-ray Spectroscopy, (FESEM-EDS), Line Scan, Dot Mapping, X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET). To investigate the sonocatalytic activity of the Fe₃O₄@HZSM-5 magnetite nanocomposite, the sonocatalytic removal conditions were optimized by evaluating the influences of operating parameters like the dosage of catalyst, reaction time, pH, the concentration of H₂O₂, MNZ concentration, and pH on the MNZ removal. The MNZ maximum removal efficiency and TOC at reaction time 40 min, catalyst dose 0.4 g/L, H₂O₂ concentration 1 mM, MNZ initial concentration 25 mg/L, and pH 7 were achieved at 98% and 81%, respectively. Additionally, the MNZ removal efficiency in the real wastewater sample under optimal conditions was obtained at 83%. The achieved results showed that using Langmuir-Hinshelwood kinetic model K_L-H = 0.40 L mg^-1, K_C = 1.38 mg/L min) can describe the kinetic removal of the process. The radical scavenger tests indicated that the major reactive oxygen species were formed by hydroxyl radicals in the Sono-Fenton-like process. Evaluation of the nanocomposite reusability showed an 85% reduction in the MNZ removal efficiency after seven cycles. Based on the results, it can be concluded that Fe₃O₄@HZSM-5 were synthesized as magnetic heterogeneous nano-catalysts to effectively degrade MNZ, and the observed stability and recyclability demonstrated that Fe₃O₄@HZSM-5 was promising for the treatment of wastewater contaminated with antibiotics.

Efficiency of Ag3PO4/TiO2 as a heterogeneous catalyst under solar and visible light for humic acid removal from aqueous solution

Nowadays, the presence of humic acid (HA) in water sources is highly regarded due to the production of extremely harmful byproducts such as trihalomethanes. In this study, the effectiveness of an Ag₃PO₄/TiO₂ catalyst produced by in situ precipitation as a heterogeneous catalyst for the degradation of humic acid in the existence of visible and solar light was evaluated. The Ag₃PO₄/TiO₂ catalyst's structure was characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS), after which the catalyst dosage, HA concentration, and pH parameters were adjusted. After a 20-min reaction, the highest HA degradation of 88.2% and 85.9% in presence of solar light and visible light were attained at the ideal operating conditions of 0.2 g/L catalyst, 5 mg/L HA, and pH 3, respectively. It was discovered that, based on kinetic models, the degradation of HA matched both Langmuir-Hinshelwood and pseudo-first-order kinetics at concentrations of 5 to 30 mg/L (R² > 0.8). The Langmuir-Hinshelwood model had surface reaction rate constants (K_c) of 0.729 mg/L.min and adsorption equilibrium constants (K_L-H) of 0.036 L/mg. Eventually, a real-water investigation into the process' effectiveness revealed that, under ideal circumstances, the catalyst had a reasonable HA removal efficiency of 56%.

Synergetic metronidazole removal from aqueous solutions using combination of electro-persulfate process with magnetic Fe3O4@AC nanocomposites: nonlinear fitting of isotherms and kinetic models

The removal of metronidazole (MNZ) from aqueous solutions by the electro-persulfate (EC–PS) process was performed in combination with magnetic Fe3O4@activated carbon (AC) nanocomposite. In the first step, the Fe3O4@AC nanocomposites were synthesized and characterized using energy-dispersive X-ray spectroscopy (XRD), vibrating-sample magnetometer (VSM) and field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), mapping, and Fourier-transform infrared spectroscopy (FTIR) analysis. The effect of Fe3O4@AC, PS and EC processes were studied separately and in combination and finally, the appropriate process for MNZ removal was selected. The effect of key parameters on the EC–Fe3O4@AC–PS process including pH, Fe3O4@AC dosage, initial MNZ concentration, and PS concentration were investigated. Based on the results obtained, the Fe3O4@AC had a good structure. The MNZ removal in EC, PS, Fe3O4@AC, EC–Fe3O4@AC, EC–PS, EC–Fe3O4@AC–NaCl, EC–Fe3O4@AC–PS, and EC–Fe3O4@AC–PS–NaCl processes were 0, 0, 59.68, 62, 68.94, 67.71, 87.23 and 88%, respectively. Due to the low effect of NaCl insertion on the EC–Fe3O4@AC–PS process, it was not added into the reactor and optimum conditions for the EC–Fe3O4@AC–PS process were determined. Under ideal conditions, including MNZ = 40 mg/L, Fe3O4@AC dose = 1 g/L, pH = 3, PS concentration = 1.68 mM, current density (CD) = 0.6 mA/cm2 and time = 80 min, the MNZ removal was 92%. Kinetic study showed that the pseudo-second-order model was compatible with the obtained results. In the isotherm studies, the Langmuir model was the most consistent for the data of the present study, and the Q max for Fe3O4@AC dose from 0.25 to 1 g/L was 332 to 125 mg/g, respectively.

Preparation of pH-Responsive Vesicular Deferasirox: Evidence from In Silico, In Vitro, and In Vivo Evaluations

pH-sensitive nanocarriers can effectively deliver anticancer drugs to tumors and reduce the adverse effects of conventional chemotherapy. In this light, we prepared a novel pH-responsive deferasirox (DFX)-loaded vesicle and comprehensively performed in silico, in vitro, and in vivo studies to examine the properties of the newly synthesized formulation. Physiochemical assessment of the developed formulations showed that they have an average size (107 ± 2 nm), negative zeta potential (-29.1 ± 1.5 mV), high encapsulation efficiency (84.2 ± 2.6%), and a pH-responsive release. Using the molecular dynamics simulation, the structural and dynamic properties of ergosterol-containing niosomes (ST60/Ergo) in the presence of DFX molecules were analyzed and showed a good interaction between DFX and vesicle components. Cytotoxic assessment showed that niosomal DFX exhibited a greater cytotoxic effect than free DFX in both human cancer cells (MCF-breast cancer and Hela cervical cancer) and induced evident morphological features of apoptotic cell death. No marked difference between the ability of free and niosomal DFX was found in activating caspase-3 in Hela cells. Eight weeks of intraperitoneal administrations of free DFX at three doses caused a significant increase in serum biochemical parameters and liver lipid peroxidation. Treatment with 5 mg/kg dose of niosomal DFX caused a significant increase in serum creatinine (P < 0.05); however, other parameters remained unchanged. On the other hand, administration of niosomal DFX at the highest dose (10 mg/kg) significantly increased serum creatinine (P < 0.05), BUN, and serum liver enzymes compared to the control rats (P < 0.001). Based on the results, the application of pH-responsive DFX-loaded niosomes, as a novel drug delivery platform, may yield promising results in cancer treatment.

The removal of tetracycline with biogenic CeO2 nanoparticles in combination with US/PMS process from aqueous solutions: kinetics and mechanism

Antibiotics have received great attention because of their abuse and potential hazards to the human health and environment. In the current work, peroxymonosulfate (PMS) was added to a cerium oxide (CeO₂)/ultrasonic (US) system for tetracycline (TC) degradation. CeO₂ nanoparticles (NPs) were synthesized by a simple and cost-effective method using Stevia rebaudiana leaf extract and cerium nitrate as precursors. The as-synthesized CeO₂ NPs were characterized by X-ray diffraction, field emission scanning electron microscopy, and Fourier-transform infrared spectroscopy analysis. The effects of catalyst dosage, PMS concentration, US power, initial antibiotic concentration, and pH on TC removal were investigated. The results confirmed the formation of CeO₂ NPs with a fluorite structure, spherical shape, and average particle size of 29 nm. The removal efficiency of TC was 92.6% in the optimum oxidation conditions ([TC] = 15 mg/L, [PMS] = 50 mM, [CeO₂] = 0.6 g/L, pH = 6, and US = 70 W) and followed the zero-order kinetics. Experiment scavenger demonstrated both sulfate and hydroxyl radicals (SO₄^•-, ^•OH) were responsible for degrading antibiotics. Biogenic CeO₂ NPs and ultrasound waves-activated PMS is a promising technology for water pollution caused by contaminants such as pharmaceuticals.

Chlorpyrifos remediation in agriculture runoff with homogeneous solar photo-Fenton reaction at near neutral pH: phytotoxicity assessment

This study represents the first application of Fe-citrate-based photo-Fenton chemistry for the degradation of chlorpyrifos (CPF) spiked into agricultural runoff, and its phytotoxicity assessment. The effects of the initial CPF concentration, time and ratio of Fe-citrate/H₂O₂ on CPF removal during the photo-Fenton reaction were investigated and modeled with analysis of variance using R software by the response-surface methodology package. According to the stationary point in original units, the optimal condition for 70.00% CPF removal was as follows: CPF = 2.5 mg L^-1 (0.0), time = 48.0 min (0.585) and Fe-citrate/H₂O₂ = 0.075 (0.539). Beside running the system at near-neutral pH, another strength of this study is related to the treatment of agricultural runoff contaminated with CPF with a raceway pond reactor, which has the advantages of simplicity of the facilities and procedures, as well as the possibility of using sunlight more efficiently in the field of applications. Finally, untreated and treated agriculture runoffs were used as irrigation to determine their phytotoxic effects on seed germination of cress (Lepidium sativum). Solar photo-Fenton treatment greatly reduced phytotoxicity of agriculture runoff and showed the highest germination percentage (70%) compared to both raw agricultural runoff (60%) and untreated CPF-spiked runoff (35%).

Hybrid UV/COP advanced oxidation process using ZnO as a catalyst immobilized on a stone surface for degradation of acid red 18 dye

Azo dyes are the largest group of synthetic organic dyes which containing the linkage C-N[bond, double bond]N-C and used in various industries such as textile industries leather articles, and some foods. Azo dyes are resistant compounds against the biodegradation processes. The purpose of this research was hybrid UV/COP advanced oxidation process using ZnO as a catalyst immobilized on a stone surface for degradation of acid red 18 (AR18) Dye. In the hybrid process using some parameters such as the dye initial concentration, pH, contact time and catalyst concentration, the process efficiency was investigated. In order to the dye removal, the sole ozonation process (SOP), catalytic ozonation process (COP) and photocatalytic process (UV/ZnO) were used. The ZnO nanoparticles were characterized by XRD, SEM and TEM analyses.  The maximum dye removal was achieved 97% at the dye initial concentration 25 mg/L, catalyst concentration 3 g/L, contact time 40 min and pH 5. As a real sample, the Yazdbaf textile factory wastewater was selected. After that, the physicochemical quality was evaluated. As well as, in the optimal conditions, the AR18 dye removal efficiency was achieved 65%. The kinetic results demonstrated that the degradation reaction was fitted by pseudo-first-order kinetic. The UV/COP hybrid process had high efficiency for removal of resistant dyes from the textile wastewater. Advantages of this technique were as follows:•ZnO nanoparticles were synthesized as catalyst by thermal method and were immobilized on the stones.•pH changes had no significant effect on the removal efficiency.•In the kinetic studies, the decomposition reaction followed pseudo-first order kinetic.

Synthesis of Fe3O4 nanoparticles @Trioctylmethylammonium thiosalicylat (TOMATS) as a new magnetic nanoadsorbent for adsorption of ciprofloxacin in aqueous solution

The aim of this research was to investigate ciprofloxacin (CIP) removal efficiency from aqueous solutions by using Fe3O4 nanoparticles @Trioctylmethylammonium thiosalicylat Ionic liquid (Fe3O4 NP@ TOMATS IL) as a new magnetic nanoadsorbent. The adsorbent was characterized by field emission scanning electron microscope-energy dispersive spectroscopy (FESEM-EDS), mapping, Fourier transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET), X-ray powder diffraction (XRD). The effects of solution pH, adsorbent dose, contact time, initial CIP concentration, and temperature on CIP removal were also investigated. In optimal conditions such as pH = 5.6, CIP concentration = 30 mg/L, adsorbent dose = 0.15 g, temperature = 30 °C, contact time = 90 min, the removal efficiency in synthetic and real wastewater were obtained 87 and 73%, respectively. Batch experiments were carried out to study the sorption Kinetics, thermodynamics, and equilibrium isotherms of CIP with magnetic nanoadsorbent. The results show that all of the above factors influence CIP removal. The Langmuir adsorption isotherm fits the adsorption process well, with the pseudo second-order model describing the adsorption kinetics accurately. The thermodynamic parameters indicate that adsorption is mainly physical adsorption. Recycling experiments revealed that the behavior of adsorbent is maintained after recycling for four times.

Photocatalytic degradation of ciprofloxacin using CuFe2O4@methyl cellulose based magnetic nanobiocomposite

Herein, magnetically separable CuFe₂O₄@methyl cellulose (MC) as a novel magnetic nanobiocomposite photocatalyst was synthesized with a facile, rapid, green, and new microwave-assisted method. After that, CuFe₂O₄@MC was characterized with FESEM, EDS, FT-IR, XRD, TGA, and VSM techniques. To measure CuFe₂O₄@MC photocatalytic activity, ciprofloxacin (CIP) removal ability of CuFe₂O₄@MC was investigated under the conditions such as initial CIP concentrations (3, 5, 7, and 9 mg/L), pHs (3, 7, and 11), photocatalyst loadings (0.025, 0.05, 0.1, 0.2, 0.3, and 0.4 g), and irradiation time (15, 30, 45, 60, 75, and 90 min). Kinetic process was evaluated with the pseudo-first order and the Langmuir-Hinshelwood models. CIP concentration was measured with high performance liquid chromatography (HPLC). The maximum CIP removal efficiency in the optimal conditions which contained pH = 7, CIP initial concentration of 3 mg/L, photocatalyst loading of 0.2 g, and at irradiation time 90 min was achieved 72.87 % and 80.74 % from real and synthetic samples, respectively. Also, COD removal efficiency in the optimal conditions was achieved 68.26 %. Furthermore, the CuFe₂O₄@MC reusability and chemical stability were examined and 73.78 % of CIP was degraded after the fourth cycle.

Advantages of this technique were as follows:

•

CuFe₂O₄@MC as a new nanobiomagnetic photocatalyst was synthesized with a facile, fast, and green method and were characterized with FESEM, EDS, FT-IR, XRD, TGA, and VSM techniques.

•

Ferromagnetic property and pure-phase spinel ferrites of CuFe₂O₄@MC were confirmed and significant photocatalytic activity of CuFe₂O₄@MC was observed.

•

Easily gathering, reusability and good chemical stability were interests of this nanobiomagnetic photocatalyst.