Neglected antibacterial activity of ethylene glycol as a common solvent

The effectiveness of gliding arc discharge plasma in sterilizing artificial seawater contaminated with Vibrio parahaemolyticus

The rapid proliferation of the halophilic pathogen Vibrio parahaemolyticus poses a severe health hazard to halobios and significantly impedes intensive mariculture. This study aimed to evaluate the potential application of gliding arc discharge plasma (GADP) to control the infection of Vibrio parahaemolyticus in mariculture. This study investigated the inactivation ability of GADP against Vibrio parahaemolyticus in artificial seawater (ASW), changes in the water quality of GADP-treated ASW, and possible inactivation mechanisms of GADP against Vibrio parahaemolyticus in ASW. The results indicate that GADP effectively inactivated Vibrio parahaemolyticus in ASW. As the volume of ASW increased, the time required for GADP sterilization also increased. However, the complete sterilization of 5000 mL of ASW containing Vibrio parahaemolyticus of approximately 1.0 × 104 CFU/mL was achieved within 20 min. Water quality tests of the GADP-treated ASW demonstrated that there were no significant changes in salinity or temperature when Vibrio parahaemolyticus (1.0 ×104 CFU/mL) was completely inactivated. In contrast to the acidification observed in plasma-activated water (PAW) in most studies, the pH of ASW did not decrease after treatment with GADP. The H2O2 concentration in the GADP-treated ASW decreased after post-treatment. The NO2-concentration in the GADP-treated ASW remained unchanged after post-treatment. Further analysis revealed that GADP induced oxidative stress in Vibrio parahaemolyticus, which increased cell membrane permeability and intracellular ROS levels of Vibrio parahaemolyticus. This study provides a viable solution for infection with the halophilic pathogen Vibrio parahaemolyticus and demonstrates the potential of GADP in mariculture.

Human Exposure to Ambient Atmospheric Microplastics in a Megacity: Spatiotemporal Variation and Associated Microorganism-Related Health Risk

Microplastics are found in various human tissues and are considered harmful, raising concerns about human exposure to microplastics in the environment. Existing research has analyzed indoor and occupational scenarios, but long-term monitoring of ambient atmospheric microplastics (AMPs), especially in highly polluted urban regions, needs to be further investigated. This study estimated human environmental exposure to AMPs by considering inhalation, dust ingestion, and dermal exposure in three urban functional zones within a megacity. The annual exposure quantity was 7.37 × 104 items for children and 1.06 × 105 items for adults, comparable with the human microplastic consumption from food and water. Significant spatiotemporal differences were observed in the characteristics of AMPs that humans were exposed to, with wind speed and rainfall frequency mainly driving these changes. The annual human AMP exposure quantity in urban green land spaces, which were recognized as relatively low polluted zones, was comparable with that in public service zones and residential zones. Notably, significant positive correlations between the AMP characteristics and the pathogenicity of the airborne bacterial community were discovered. AMP size and immune-mediated disease risks brought by atmospheric microbes showed the most significant relationship, where Sphingomonas might act as the potential key mediator.

Biotechnological Plastic Degradation and Valorization Using Systems Metabolic Engineering

Various kinds of plastics have been developed over the past century, vastly improving the quality of life. However, the indiscriminate production and irresponsible management of plastics have led to the accumulation of plastic waste, emerging as a pressing environmental concern. To establish a clean and sustainable plastic economy, plastic recycling becomes imperative to mitigate resource depletion and replace non-eco-friendly processes, such as incineration. Although chemical and mechanical recycling technologies exist, the prevalence of composite plastics in product manufacturing complicates recycling efforts. In recent years, the biodegradation of plastics using enzymes and microorganisms has been reported, opening a new possibility for biotechnological plastic degradation and bio-upcycling. This review provides an overview of microbial strains capable of degrading various plastics, highlighting key enzymes and their role. In addition, recent advances in plastic waste valorization technology based on systems metabolic engineering are explored in detail. Finally, future perspectives on systems metabolic engineering strategies to develop a circular plastic bioeconomy are discussed.

Comparative Metabolomic Profiling of Horse Gram (Macrotyloma uniflorum (Lam.) Verdc.) Genotypes for Horse Gram Yellow Mosaic Virus Resistance

Horse gram (Macrotyloma uniflorum (Lam.) Verdc.) is an under-utilized legume grown in India. It is a good source of protein, carbohydrates, dietary fiber, minerals, and vitamins. We screened 252 horse gram germplasm accessions for horse gram yellow mosaic virus resistance using the percent disease index and scaling techniques. The percentage values of highly resistant, moderately resistant, moderately susceptible, susceptible, and highly susceptible were 0.34, 13.89, 38.89, 46.43, and 0.34, respectively. Repetitive trials confirmed the host-plant resistance levels, and yield loss was assessed. The present disease index ranged from 1.2 to 72.0 and 1.2 to 73.0 during the kharif and rabi seasons of 2018, respectively. The maximum percent yield loss was noticed in the HS (75.0 -89.4), while HR possessed the minimum (1.2-2.0). The methanolic leaf extracts of highly resistant and highly susceptible genotypes with essential controls were subjected to gas chromatography-mass spectrometry analysis. Differential accumulation of metabolites was noticed, and a total of 81 metabolites representing 26 functional groups were identified. Both highly resistant and susceptible genotypes harbored eight unique classes, while ten biomolecules were common. The hierarchical cluster analysis indicated a distinct metabolite profile. Fold change in the common metabolites revealed an enhanced accumulation of sugars, alkanes, and carboxylic acids in the highly resistant genotype. The principal component analysis plots explained 93.7% of the variation. The metabolite profile showed a significant accumulation of three anti-viral (octadecanoic acid, diphenyl sulfone, and 2-Aminooxazole), one insecticidal (9,10-Secocholesta-5,7,10(19)-triene-3,24,25-triol), one antifeedant (cucurbitacin B), and six metabolites with unknown biological function in the highly resistant genotype.

Electrospun Nanodiamond-Silk Fibroin Membranes: A Multifunctional Platform for Biosensing and Wound-Healing Applications

Next generation wound care technology capable of diagnosing wound parameters, promoting healthy cell growth, and reducing pathogenic infections noninvasively would provide patients with an improved standard of care and accelerated wound repair. Temperature is one of the indicating biomarkers specific to chronic wounds. This work reports a hybrid, multifunctional optical material platform-nanodiamond (ND)-silk membranes as biopolymer dressings capable of temperature sensing and promoting wound healing. The hybrid structure was fabricated through electrospinning, and 3D submicron fibrous membranes with high porosity were formed. Silk fibers are capable of compensating for the lack of an extracellular matrix at the wound site, supporting the wound-healing process. Negatively charged nitrogen vacancy (NV^-) color centers in NDs exhibit optically detected magnetic resonance (ODMR) and act as nanoscale thermometers. This can be exploited to sense temperature variations associated with the presence of infection or inflammation in a wound, without physically removing the dressing. Our results show that the presence of NDs in the hybrid ND-silk membranes improves the thermal stability of silk fibers. NV^- color centers in NDs embedded in silk fibers exhibit well-retained fluorescence and ODMR. Using the NV^- centers as fluorescent nanoscale thermometers, we achieved temperature sensing in 25-50 °C, including the biologically relevant temperature window, for cell-grown ND-silk membranes. An enhancement (∼1.5× on average) in the temperature sensitivity of the NV^- centers was observed for the hybrid materials. The hybrid membranes were further tested in vivo in a murine wound-healing model and demonstrated biocompatibility and equivalent wound closure rates as the control wounds. Additionally, the hybrid ND-silk membranes exhibited selective antifouling and biocidal propensity toward Gram-negative Pseudomonas aeruginosa and Escherichia coli, while no effect was observed on Gram-positive Staphylococcus aureus.

Use of a small-scale, portable test chamber for determining the bactericidal efficacy of aerosolized glycol formulations

This study aimed to understand the efficacy and mechanisms of action of an aerosolized glycol-ethanol formulations against bacteria. We validated a small-scale in-house test chamber to determine the microbicidal efficacy of four aerosolized formulations combining dipropylene glycol and ethanol against Staphylococcus aureus and Escherichia coli embedded in alginate. The aerosolized glycol/ethanol formulation decreased bacterial viability by 3 log₁₀ and was more efficacious than an ethanol only control formulation. Electron microscopic examination indicated extensive structural damage in both bacteria, and membrane damage was confirmed with potassium release in S. aureus and DNA release in E. coli. The development of a small test chamber facilitated the measurement of the microbicidal efficacy and experiments to understand the mechanism of action of an aerosolized microbicidal formulation. SIGNIFICANCE AND IMPACT OF THE STUDY: There is an increased interest in developing effective microbicidal-aerosolized formulations. The development of a small in-house test chamber allowed the measurement of the microbicidal efficacy of an aerosolized glycol/ethanol formulation at a low cost. We showed that a glycol/ethanol aerosolized formulation caused extensive structural damage in Gram-negative and -positive bacteria resulting in a 3 log₁₀ reduction in viability.

Study of chemical structure, antimicrobial, cytotoxic and mechanism of action of Syzygium aromaticum essential oil on foodborne pathogens

In this study, chemical composition (gas chromatography-mass spectroscopy), chemical structure (fourier transform infrared spectroscopy) and antioxidant potential (β-carotene bleaching assay and DPPH/ABTS-radical scavenging activity tests) of Syzygium aromaticum essential oil (SAEO) were evaluated. Eugenol (75.11%) was found to be the major compound of SAEO. Eugenol, as the main chemical constituent of SAEO, showed its signature peaks in the wavenumber range of 720 – 1250 cm-1, ascribing to the C=C region. The antimicrobial activity of SAEO on Escherichia coli, Staphylococcus aureus, Listeria innocua and Pseudomonas aeruginosa were evaluated. The scanning electron microscopy (SEM) was then applied to unravel the antibacterial mechanism of SAEO on E. coli as the most resistant strain and L. innocua as the most sensitive strain. The MTT assay was also used to investigate the cytotoxicity effect of SAEO on human colonic cancer cell lines (HT29 cell line) and the highest cytotoxic effect was observed at 200 mg.mL-1 concentration of SAEO. The SEM micrographs revealed that the SAEO treatment was able to manifestly increase the cell permeabilization and membrane integrity disruption. This means that the entirety of the cell membranes was remarkably affected by the essential oil, which could lead to cytoplasm secretion and subsequent cell death. The data strongly suggest that SAEO had a potential antioxidant, antimicrobial and cytotoxicity activity.

Cumin essential oil: Phytochemical analysis, antimicrobial activity and investigation of its mechanism of action through scanning electron microscopy

In this study, the antimicrobial effects of cumin essential oil (CEO) and its mechanism of action through scanning electron microscopy (SEM) against Escherichia coli and Listeria innocua were investigated. The SEM images were taken at 0, 12 and 24 h at the minimum inhibitory concentration (MIC). The chemical composition of CEO was identified through gas chromatography/mass spectrometry (GC-MS). The antimicrobial effects of CEO were evaluated by the methods of Kirby-Bauer, well diffusion agar, microdilution broth and minimum bactericidal/fungicidal concentration (MBC/MFC). Antioxidant activity was examined by the methods of β-carotene/linoleic acid inhibition and 2,2-diphenyl-1-picrylhydrazyl. Total phenol content (TPC) was measured by Folin-Ciocalteu method. The subsequent analysis of CEO through GC-MS revealed that cuminal (28.28%) was the major compound of CEO. CEO showed a high TPC of 89.45 ± 0.78 mg GAE/g. The free radical scavenging activity of CEO (based on IC₅₀) was equal to 9.10 ± 0.63 μg mL^-1. In addition, CEO showed a remarkably high inhibitory effect (63%) on β-carotene bleaching via neutralizing hydroperoxides, which are responsible for the oxidation of highly unsaturated β-carotene. The antimicrobial effect increased as a function of essential oil concentration. However, there were no inhibitory effects on E. coli at 5 mg mL^-1. The electron micrographs demonstrated that CEO caused an increase in the permeabilization of the cells and disrupted the membrane integrity.

New solvent options for in vivo assays in the Galleria mellonella larvae model

Experimentation in mammals is a long and expensive process in which ethical aspects must be considered, which has led the scientific community to develop alternative models such as that of Galleria mellonella. This model is a cost and time effective option to act as a filter in the drug discovery process. The main limitation of this model is the lack of variety in the solvents used to administer compounds, which limits the compounds that can be studied using this model. Five aqueous (DMSO, MeOH, acetic acid, HCl and NaOH) and four non-aqueous (olive oil, isopropyl myristate, benzyl benzoate and ethyl oleate) solvents was assessed to be used as vehicles for toxicity and antimicrobial activity in vivo assays. All the tested solvents were innocuous at the tested concentrations except for NaOH, which can be used at a maximum concentration of 0.5 M. The toxicity of two additional compounds, 5-aminosalicylic acid and DDT, was also assessed. The results obtained allow for the testing of a broader range of compounds using wax moth larvae. This model appears as an alternative to mammal models, by acting as a filter in the drug development process and reducing costs and time invested in new drugs.

Comparison of Antibacterial Adhesion When Salivary Pellicle Is Coated on Both Poly(2-hydroxyethyl-methacrylate)- and Polyethylene-glycol-methacrylate-grafted Poly(methyl methacrylate)

Although poly(2-hydroxyethyl methacrylate) (pHEMA) and polyethylene glycol methacrylate (PEGMA) have been demonstrated to inhibit bacterial adhesion, no study has compared antibacterial adhesion when salivary pellicle is coated on polymethyl methacrylate (PMMA) grafted with pHEMA and on PMMA grafted with PEGMA. In this study, PMMA discs were fabricated from a commercial orthodontic acrylic resin system (Ortho-Jet). Attenuated total reflection-Fourier transform infrared spectra taken before and after grafting confirmed that pHEMA and PEGMA were successfully grafted on PMMA. Contact angle measurements revealed PMMA-pHEMA to be the most hydrophilic, followed by PMMA-PEGMA, and then by PMMA. Zeta potential analysis revealed the most negative surface charges on PMMA-PEGMA, followed by PMMA-pHEMA, and then by PMMA. Confocal laser scanning microscopy showed green fluorescence in the background, indicating images that influenced the accuracy of the quantification of live bacteria. Both the optical density value measured at 600 nm and single plate-serial dilution spotting showed that pHEMA was more effective than PEGMA against Escherichia coli and Streptococcus mutans, although the difference was not significant. Therefore, the grafting of pHEMA and PEGMA separately on PMMA is effective against bacterial adhesion, even after the grafted PMMA were coated with salivary pellicle. Surface hydrophilicity, bactericidality, and Coulomb repulsion between the negatively charged bacteria and the grafted surface contributed to the effectiveness.