SPE/HPLC/UV studies on acrylamide in deep-fried flour-based indigenous Chinese foods

Enhanced detection of acrylamide using a versatile solid-state upconversion sensor through spectral and visual analysis

Acrylamide (AM) generally forms in high-temperature processes and has been classified as a potential carcinogen. In this study, we put forward a maneuverable solid-state luminescence sensor using polydimethylsiloxane (PDMS) as the matrix coupled with upconversion nanoparticles as the indicator. The core-shell upconversion nanoparticles emitting cyan light were uniformly encapsulated in PDMS. Then it was further modified with complementary DNA of AM aptamer. The nanocrystalline fluorescein isothiocyanate isomer (FITC), coupled with AM aptamer, was attached to the surface of PDMS. FITC effectively quenched the upconversion luminescence through fluorescence resonance energy transfer (FRET). The introduction of AM resulted in preferentially bound to aptamer caused the separation of the quencher and the donor, and led to luminescence recovery. The developed sensor was applied for both spectral and visual monitoring, demonstrating a detection limit (LOD) of 1.00 nM and 1.07 nM, respectively. Importantly, in the actual foodstuffs detection, there is no obvious difference between the results of this study and the standard method, which indicates the developed method has good accuracy. Therefore, this solid-state sensor has the potential for on-site detection using a smartphone device and an Android application.

Asparaginase Treatment of Sea Buckthorn Berries as an Effective Tool for Acrylamide Reduction in Nutritionally Enriched Wholegrain Wheat, Rye and Triticale Biscuits

Sea buckthorn pomace is a by-product of juice production, which is still rich in bioactive compounds. After drying, the pomace can be effectively used as a valuable addition to bakery products supporting their nutritional value. However, due to the high content of the amino acid asparagine in sea buckthorn, this promising material contributes to the undesirable formation of acrylamide. To reduce the risk from this potentially carcinogenic compound, enzymatic treatment of sea buckthorn with asparaginase was applied, which resulted in a substantial reduction of asparagine content from 1834 mg/kg in untreated dried sea buckthorn pomace to 89 mg/kg in enzymatically treated dried sea buckthorn pomace. 10% substitution of wholegrain cereal flour with enzymatically treated sea buckthorn pomace powder in rye and triticale biscuits resulted in a 35% reduction in acrylamide content, in the case of wholegrain wheat biscuits up to a 64% reduction, compared to biscuits with untreated sea buckthorn pomace powder. This study confirmed that treating fruit with asparaginase is an effective way to reduce health risk caused by acrylamide in biscuits enriched with nutritionally valuable fruit pomace.

Toxicity, formation, contamination, determination and mitigation of acrylamide in thermally processed plant-based foods and herbal medicines: A review

Thermal processing is one of the important techniques for most of the plant-based food and herb medicines before consumption and application in order to meet the specific requirement. The plant and herbs are rich in amino acids and reducing sugars, and thermal processing may lead to Maillard reaction, resulting as a high risk of acrylamide pollution. Acrylamide, an organic pollutant that can be absorbed by the body through the respiratory tract, digestive tract, skin and mucous membranes, has potential carcinogenicity, neurological, genetic, reproductive and developmental toxicity. Therefore, it is significant to conduct pollution determination and risk assessment for quality assurance and security of medication. This review demonstrates state-of-the-art research of acrylamide focusing on the toxicity, formation, contamination, determination, and mitigation in taking food and herb medicine, to provide reference for scientific processing and ensure the security of consumers.

Impact of Some Enzymatic Treatments on Acrylamide Content in Biscuits

Since its discovery in many heat-treatment foods in 2002, many efforts have been made to reduce acrylamide levels in foods. Methods to reduce acrylamide levels by reducing Maillard reaction products have been considered. However, baking cookies produces acrylamide, a carcinogenic compound. This study aimed to use a new quantitative index and formula for L-asparaginase, glucose oxidase, their 1:1 blending enzymes, baker’s yeast, and green tea powder (0.5 g/kg wheat flour) at a new proposed temperature of 37 °C for 30 min to reduce acrylamide production in biscuits and bakery products using new indicators such as asparagine reduction (%), the asparagine/acrylamide ratio, acrylamide reduction (%), and the asparagine/reducing sugar ratio. The highest acrylamide concentrations were reduced from 865 mg/kg in the blank sample (BT0) to 260 and 215 mg/kg in the mixed enzyme powder (1:1) (BT3)- and BT4-treated samples, respectively. The biscuit samples treated with 0.5 g/kg L-asparaginase reduced the acrylamide levels by approximately 67.63%, while the BT3 samples showed acrylamide levels of 69.94% and asparagine levels of 68.75% and 47%, respectively, compared with percentage in the untreated sample (blank), 95%. This percentage was 54.16% for the BT4 samples. The results showed that acrylamide was formed during baking, and all treatment samples inhibited its formation, making it possible to produce foods with low levels of acrylamide in starchy foods in the food industry at 37 °C for 30 min and preserving the quality and nutritional value of the final product. It can be used as a specialty food or functional food and protects school-agechildren, as well as youth on campus, from approximately 70–80% of their daily intake of acrylamide.

Enhancing trace acrylamide analysis by bromine derivatization coupled with direct-immersion solid-phase microextraction in drinking water

Acrylamide is a neurotoxic and genotoxic compound. It is abundant in drinking water because of the usage of polyacrylamide. Its high polarity and small molecular weight characteristics make it difficult to be extracted and analysed. In this study, a novel method was optimized for the determination of trace acrylamide in drinking water. The optimized method, uses bromine derivatization, can avoid false analysis of co-extractives and precursors effectively by transferring acrylamide to 2-bromopropenamide. The 2-bromopropenamide was extracted from water samples using DI-SPME and further analysed by GC-MS. This optimized method uses CAR/PDMS coating SPME fibre to extract at 55°C for 45 min after the addition of 12 g Na₂SO₄, and then desorbs the extractions in GC injector at 260°C for 3 min. The detection limit was 0.05 μg/L with linearity ranging from 0.5 to 500 μg/L. The repeatability and reproducibility relative standard deviation were 7.30% and 8.50%, respectively. The spiking recovery of tap water samples ranged from 100% to 106%. These results confirmed that this novel method was more precise and accurate than the previously reported SPME methods that used to analyse trace acrylamide in drinking water. The concentrations of acrylamide in the collected samples from clarification and filtration units were 0.80 and 0.71 g/L respectively.

Acrylamide in bread: a review on formation, health risk assessment, and determination by analytical techniques

Acrylamide is a water-soluble toxicant found in high-protein and carbohydrate-containing foods exposed to high temperature like bread as the staple foodstuff. This toxicant is mainly formed via Maillard reaction. The potential adverse effects of acrylamide especially possible carcinogenicity in human through dietary exposure necessitate its monitoring. Regarding the existence of its precursors in wheat bread formulation as well as extreme consumption of bread by most population and diversity of bread types, its acrylamide level needs to be investigated. The indicative value for acrylamide in wheat bread is set at 80 μg/kg. Consequently, its determination using liquid chromatography-tandem mass spectrometry (LC-MS/MS), gas chromatography-mass spectrometry (GC-MS), or capillary electrophoresis can be helpful considering both the risk assessment and quality control aspects. In this respect, methods based on LC-MS/MS show good recovery and within laboratory repeatability with a limit of detection of 3-20 μg/kg and limit of quantification of 10-50 μg/kg which is suitable for the immediate requirements for food product monitoring and calculation of consumer exposure.

Review of Research into the Determination of Acrylamide in Foods

Acrylamide (AA) is produced by high-temperature processing of high carbohydrate foods, such as frying and baking, and has been proved to be carcinogenic. Because of its potential carcinogenicity, it is very important to detect the content of AA in foods. In this paper, the conventional instrumental analysis methods of AA in food and the new rapid immunoassay and sensor detection are reviewed, and the advantages and disadvantages of various analysis technologies are compared, in order to provide new ideas for the development of more efficient and practical analysis methods and detection equipment.

High-Performance Liquid Chromatography Determination of Acrylamide after Its Extraction from Potato Chips

Background: Acrylamide is a known carcinogenic product that has been found among the substances such as potato chips which to be processed under the heat-treatment. In order to extract amounts of acrylamide from fried chips in market, an ultrasound-assisted liquid– liquid extraction (UA-LLE) technique is proposed. The UA-LLE coupled LLE and ultrasonication in a single step. Methods: Chips samples were dissolved in an extracting organic solvent using ultrasonication to prompt transferring of acrylamide into the organic phase. As a result, the extraction time and process efficiency were significantly enhanced through increasing the collision power and mass transfer between grounded chips and organic phase. Results: Important parameters affecting the extraction efficiency such as kind of organic solvent and its volume, re-dissolving solvent and pH were optimized. This newly proposed method has been applied to determine the trace acrylamide in potato chips samples purchased from local market. Conclusion: UA-LLE is a handy, economic and time-saving method, with high extraction yield (over 103% average recovery) and good precision (lower than 15% relative standard deviation, RSD). Most importantly, it seems this method to be an ideal pre-treatment method for the extraction of acrylamide in food matrix in food quality control laboratories.

Comparative Study of Four Analytical Methods for the Routine Determination of Acrylamide in Black Ripe Olives

Reducing acrylamide in foods is an important scientific and regulatory goal. Black ripe olives contain significant levels of acrylamide. However, unlike cereal and potato products, there are no standardized methods or certified reference materials for olives and no harmonization between laboratories performing routine analyses. The industry has observed inconsistencies between laboratories using different analytical methods. To narrow the cause of this variability, acrylamide was extracted from olives using a single protocol and analyzed with the most commonly used routine methods: liquid chromatography with ultraviolet detection (LC-UV) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) without bromination and LC-UV and gas chromatography-mass spectrometry (GC-MS) following bromination. This design specifically evaluated the effects of sample derivatization and detector on acrylamide measurements, which has not been documented for any food. Accuracy, precision, sensitivity, linearity, and reproducibility were assessed, and 10 commercial olive samples were analyzed. LC-MS/MS demonstrated the best overall performance. Although derivatization decreased precision and reproducibility, all detection methods had comparable accuracy and calculated acrylamide values. The results suggest that harmonization of extraction protocols across laboratories is the most important area of future study. This study provides the framework for a standardized method for acrylamide analysis in olives. Reliable measurements are essential for aiding the decision making of the industry and regulatory agencies.

Dietary exposure to acrylamide from cafeteria foods in Jeddah schools and associated risk assessment

BACKGROUND

Acrylamide (AA) is a carcinogenic and genotoxic food contaminant produced at high temperatures in foods that are rich in carbohydrates. Foods sold in schools in Jeddah, Saudi Arabia, are among such carbohydrate-rich foods produced at high cooking temperatures. It is crucial to determine the importance of AA exposure with respect to cafeteria foods and assess the associated risks.

RESULTS

The highest mean AA level was measured in chocolate pies (439 µg kg^-1 ), followed by custard pies (435 µg kg^-1 ) and cheese pies (432 µg kg^-1 ). The average and 95th percentile values of AA exposure were 0.51 and 1.17 [µg kg^-1 body weight (BW) school day^-1 ]. The average exposure significantly decreased with an increase in age, from 0.65 (µg kg^-1 BW school day^-1 ) in primary school students to 0.37 in secondary school students. Cheese and chocolate pies are the main contributors in AA intake. The contributions of cheese and chocolate pies to the average exposure among primary, middle and secondary school students were 23.1%, 24.7% and 29.4% and 16.9%, 12.1% and 11.9%, respectively. Other products with significant contributions included cheese sandwiches (10.8%, 8.9% and 12.7%), plain cookies (7.7%, 5.6% and 6.7%) and custard pies (7.7%, 4.8% and 8.9%). Other cafeteria products contributed to AA exposure at much lower percentages.

CONCLUSION

The calculated margins of exposure (MOEs) for the average [356 and 614 for both benchmark dose lower confidence limit (BMDL) 0.18 and 0.31 mg kg^-1 BW day^-1 ] and 95th percentile AA exposure values (154 and 265 for both BMDL 0.18 and 0.31 mg kg^-1 BW day^-1 ) suggest that there is a health concern with respect to school-aged students. © 2017 Society of Chemical Industry.

Preliminary study of acrylamide monomer decomposition during methane fermentation of dairy waste sludge

Polyacrylamide (PAM) used in sludge dewatering exists widely in high-solid anaerobic digestion. Acrylamide is registered in the list of chemicals demonstrating toxic, carcinogenic and mutagenic properties. Therefore, it is reasonable to ask about the mobility of such residual substances in the environment. The study was carried out to assess the impact of the mesophilic (39±1°C) and thermophilic (54±1°C) fermentation process on the level of acrylamide monomer (AMD) content in the dairy sludge. The material was analysed using high-performance liquid chromatography (HPLC) for quantification of AMD. The results indicate that the process of methane fermentation continues regardless of the temperature effects on the degradation of AMD in dairy sludge. The degree of reduction of acrylamide monomer for thermophilic fermentation is 100%, while for mesophilic fermentation it is 91%. In practice, this means that biogas technology eliminates the risk of AMD migration to plant tissue. Moreover, it should be stressed that 90% of cumulative biogas and methane production was reached one week earlier under thermophilic conditions - the dynamics of the methanisation process were over 20% faster.

Development of dummy molecularly imprinted based on functionalized silica nanoparticles for determination of acrylamide in processed food by matrix solid phase dispersion

A novel technique was applied for the synthesis of dummy molecularly imprinted silica nanoparticles (DMISNPs). DMISNPs were characterized by Fourier transmission infrared spectrometry, scanning electron microscopy and transmission electron microscope. The material was used as dispersant for the analysis of biscuit and bread samples using matrix solid phase dispersion (MSPD). Of advantages of such approach may be counted as the simplicity of synthesis procedure, low consumption of organic solvent, mild working temperature during the synthesis, high binding capacity and affinity. The effect of various parameters such as sample-to-dispersant ratio and eluents volume on extraction recovery was investigated and optimized by central composite design under response surface methodology. It was proven that the proposed dispersant leads to high affinity toward acrylamide even in complicated matrices. Quantification of the acrylamide was carried out by high performance liquid chromatography with UV detection (HPLC-UV).

Effect of residual monomer from polyacrylamide on head lettuce grown in peat substrate

The paper investigates the migration of the acrylamide monomer (AMD) to lettuce chosen as a test plant growing in an organic medium (peat substrate). Polyacrylamide (PAM)-based flocculant added to the growing medium contained no more than 1000 mg kg(-1) of AMD. Plants were grown with varied doses of PAM preparation (0.5-3.0 mg dm(-3) of peat substrate) to compare the results with the control sample. The determination of AMD content, chlorophyll content, weight of the lettuce head, and also analysis of macro- and micro-elements in lyophilised test material was made under the same analytical conditions. The results showed that lettuce plants absorb AMD to the leaves from the peat substrate. The AMD uptake has a negative impact on the growth of lettuce. It reduces the average fresh weight of heads and destabilises the mineral composition of the plant. Therefore, concern related to the transfer risk of the residual AMD from sludge used for organic fertilisation of edible plants still remains a crucial question from a food and consumer safety point of view. To ensure consumer safety, the fate of the AMD following the application of PAM to cropland should be carefully monitored in the whole food chain.

Acrylamide analysis in food by liquid chromatographic and gas chromatographic methods

Acrylamide (AA) is a compound classified as carcinogenic to humans by the International Agency for Research on Cancer. It was first discovered to be present in certain heated processed food by the Swedish National Food Administration (SNFA) and University of Stockholm in early 2002. The major pathway for AA formation in food is the Maillard reaction between reducing sugar and the amino acid asparagine at high temperature. Since the discovery of AA's presence in food, many analytical methods have been developed for determination of AA contents in different food matrices. Also, several studies have been conducted to develop extraction procedures for AA from difficult food matrices. AA is a small, highly polar molecule, which makes its extraction and analysis challenging. Many articles and reviews have been published dealing with AA in food. The aim of the review is to discuss AA formation in food, the factors affecting AA formation and removal, AA exposure assessment, AA extraction and cleanup from food samples, and analytical methods used in AA determination, such as high-performance liquid chromatography (HPLC) and gas chromatography (GC). Special attention is given to sample extraction and cleanup procedures and analytical techniques used for AA determination.

Ultra trace level determinations of acrylamide in surface and drinking water by GC-MS after derivatization with xanthydrol

A sensitive GC-MS method has been established for the determination of acrylamide in surface and drinking water based on derivatization with xanthydrol. Deuterated acrylamide (acrylamide-d3 ) was chosen as the internal standard for analyzing the water sample. The derivatization of acrylamide was performed directly in water, and the best reaction conditions (xanthydrol of 1.6 mM, HCl concentration of 0.05 M, reaction for 30 min at ambient temperature) were established by variation of parameters. Under the established conditions, the detection and quantification limits were 3.0 and 9.7 ng/L, respectively, and the interday RSD was less than 8% at concentrations of 20 and 100 ng/L.

The effect of domestic preparation of some potato products on acrylamide content

The influence that food heating has on the concentration of acrylamide in home-cooked potato dishes prepared by high-temperature, such as pan-frying, deep-frying, roasting and microwave heating was analyzed. The experiment was performed with commercially available deep-frozen par-fried French fries and deep-frozen par-fried potato products other than French fries (cubes, wedges, noisettes, pancakes). Acrylamide was found in all deep-frozen par-fried French fries and other deep-frozen par-fried potato products before domestic preparation. The mean level of acrylamide content in all frozen potato products before preparation was found to be 322 μg/kg. Potato products were then prepared at 180 °C for 3 min and at 220 °C for 10 min. After domestic preparation (roasting, pan-frying, deep-frying and microwave heating) it was found that the level of acrylamide in all products increased. Acrylamide content in the analyzed samples significantly increased as the temperature and time of processing increased. The statistical analysis showed significant differences (P < 0.05) for acrylamide content as a function of food preparation. The level of acrylamide increased with the increased heating temperature and heating time. Additionally, the preparation method of roasting was significantly lower in acrylamide content (P < 0.05) than the preparation method of microwaving although both preparation methods used the same conditions (time and temperature). These results suggest that microwaving might be more favourable to the formation of acrylamide than conventional heating methods, such as roasting.

New trends in quantification of acrylamide in food products

Methods applied in acrylamide quantification in foods have been reviewed in this paper. Novel analytical techniques like capillary electrophoresis (CE), immunoenzymatic test (ELISA) and electrochemical biosensors, which can replace traditional methods like high performance liquid chromatography (HPLC) and gas chromatography (GC) were presented. Short time of analysis and high resolution power of electrophoretic techniques caused that they became routinely used in food analysis apart from high performance liquid chromatography and gas chromatography. Application of modern chromatography methods like ultra performance liquid chromatography (UPLC) in acrylamide quantification considerably shortened the time of analysis and decreased the consumption of indispensable reagents. The most promising approaches to acrylamide quantification in foods are electrochemical biosensors and immunoenzymatic tests. In contrast to chromatography and electrophoretic methods they require neither expensive equipment nor time consuming sample preparation and allow for fast screening of numerous samples without the usage of sophisticated apparatuses. Because of many advantages such as miniaturization, rapid and simple analysis, and high sensitivity and selectivity, biosensors are thought to replace conventional methods of acrylamide quantification in food.