Chemometric optimization of solid–liquid extraction with low-temperature partition (SLE-LTP) for determination of persistent organic pollutants in Caiman yacare eggs

Liquid-liquid and solid-liquid extractions with low-temperature partitioning - A review

The paper represents the first review of solvent extraction techniques utilizing the low-temperature partitioning/purification (LTP) approach. Initially conceived in the 1960s to purify extracts from fatty matrices, it wasn't until the 2000s that this approach received increasing attention for its efficacy in extracting organic compounds from diverse samples, often without additional cleanup steps. This review covers a brief history and proposes a mechanism for LTP-based solvent extraction. Furthermore, the principal practical issues of the technique are spotlighted, elucidating the factors influencing extraction efficiency. The advantages, limitations, and potential combinations with other extraction techniques of the LTP-based solvent extractions are analyzed. The versatility of the LTP approach is demonstrated by its applications in extracting various compounds from food, environmental, and biological samples, emphasizing its potential for rapid sample preparation with minimal steps, few chemicals, and minimal analyst intervention.

Quantitative analysis and contamination profiles of PCBs, OCPs, and PAHs in black-tailed gull eggs in the Republic of Korea

The simultaneous determination of 8 polychlorinated biphenyls (PCBs), 23 organic chlorine pesticides (OCPs), and 35 polycyclic aromatic hydrocarbons (PAHs) in black-tailed gull eggs was described using ultrasound-assisted extraction and gas chromatography-tandem mass spectrometry (GC-MS/MS). The ranges of the lower limits of detection for PCBs, OCPs, and PAHs were 0.006-0.029, 0.01-0.10, and 0.01-0.20 μg kg^-1, respectively. The intraday precision was in the range of 0.650-12.9% and the intraday accuracy was in the range of 86.6-113%. When the proposed method was used to analyze the target compounds in gull eggs collected from six sites in the Republic of Korea, the analytical results demonstrated concentration ranges of 113.32-394.07 µg kg^-1 for total PCBs, 422.92-1082.09 µg kg^-1 for total OCPs, and 134.50-231.27 µg kg^-1 for total PAHs in the samples. The PCA results for PAHs and OCPs were well differentiated by sampling site, whereas those for PCBs differed little by sampling site. There were more pyrogenic PAHs in the West Sea and the South Sea with many industrial areas than in the East Sea with few industrial areas. Differences in the OCP patterns of samples from the West Sea close to China were considered to be related to the use of DDT in China until recently. PCBs were accumulated in the samples regardless of region, so there was no significant difference in the PCB patterns between the samples obtained from the three Seas.

Microextraction technique associated with gas chromatography-mass spectrometry for determining pesticide residues in urine

Urine is one of the biological matrices most used for detecting human contamination, as it is representative and easily obtained via noninvasive sampling. This study proposes a fast, accurate, and ecological method based on liquid-liquid microextraction with low-temperature partition (μLLE/LTP). It was validated to determine nine pesticides (lindane, alachlor, aldrin, chlorpyrifos, dieldrin, endrin, DDT, bifenthrin, and permethrin) in human urine, in association with gas chromatography coupled with mass spectrometry (GC-MS). The technique was optimized through a factorial design. The best conditions for the simultaneous extraction of the analytes comprised the addition of 600 µL of water and 600 µL of acetonitrile (extracting solvent) to a 500-µL urine sample, followed by vortexing for 60 s. By freezing the samples for 4 h, it was possible to extract the pesticides and perform the extract clean-up simultaneously. The parameters selectivity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy were used to appraise the performance of the method. Good values of selectivity and linearity (R² > 0.990), LOQ (0.39-1.02 μg L^-1), accuracy (88-119% recovery), and precision (%CV ≤ 15%) were obtained. The μLLE/LTP-GC-MS method was applied to authentic urine samples collected from volunteers in Southeast Brazil.

Development of a Methodology for the Determination of Pesticide Residues in Cajá-Manga Pulp (Spondias dulcisL.) Using Solid-Liquid Extraction with Low-Temperature Partitioning

Emergent fruits with functional properties and sui generis flavours are increasingly gaining international market, mainly due to the pleasant taste and its nutritional properties. However, methodologies for determination of pesticide residues in these fruits are still incipient or nonexistent. In this work, a simple, rapid, and accessible methodology to small laboratories was developed, optimized, and validated for the determination of four pesticide residues in the cajá-manga pulp: chlorpyrifos, thiabendazole, carboxin, and difenoconazole. The extraction of pesticides from the cajá-manga pulp was performed by the liquid-solid extraction with low-temperature partitioning, achieving efficiency in the range of 75.3–129.3% with limits of quantification between 170 and 430 ng·g−1for all compounds. The methodology was validated according to the SANTE/11813/2017 document, demonstrating good detectability, selectivity, precision, and accuracy with limits of quantification within the range of the maximum residual limits preconized for the compounds. The quantification was performed by gas chromatography with flame ionization detection which, although it does not present the best detectability for the compounds, is a lower cost instrumentation and is available in several analysis laboratories in Brazil, making the method more accessible to evaluate the pesticide residues in fruit pulp. Thus, in this work, a methodology for the determination of pesticides in the cajá-manga pulp is available for the monitoring of pesticide residues in fruit pulp, in an efficient and accessible way.

Easy and fast extraction methods to determine organochlorine pesticides in sewage sludge, soil, and water samples based at low temperature

Organochlorine pesticides present in sewage sludge can contaminate soil and water when they are used as either fertilizer or agricultural soil conditioner. In this study, the technique solid-liquid extraction with low temperature purification was optimized and validated for determination of ten organochlorine pesticides in sewage sludge and soil samples. Liquid-liquid extraction with low temperature purification was also validated for the same compounds in water. Analyses were performed by gas chromatography-mass spectrometry operating in the selective ion monitoring mode. After optimization, the methods showed recoveries between 70% and 115% with relative standard deviation lower than 13% for all target analytes in the three matrices. The linearity was demonstrated in the range of 20 to 70 µg L^-1, 0.5 to 60 µg L^-1, and 3 to 13 µg L^-1, for sludge, soil, and acetonitrile, respectively. The limit of quantification ranged between 2 and 40 µg kg^-1, 1 and 6 µg kg^-1, and 0.5 µg L^-1 for sludge, soil, and water, respectively. The methods were used in the study of pesticide lixiviation carried out in a poly vinyl chlorine column filled with soil, which had its surface layer mixed with sludge. The results showed that pesticides are not leached into soil, part of them is adsorbed by the sewage sludge (4-40%), and most pesticides are lost by volatilization.

Preparation of porous aromatic framework/ionic liquid hybrid composite coated solid-phase microextraction fibers and their application in the determination of organochlorine pesticides combined with GC-ECD detection

Novel porous aromatic framework/ionic liquid hybrid composite coated SPME fibers were prepared for the preconcentration of OCPs coupled with GC-ECD.