Fast ultrasound-assisted treatment of inorganic fertilizers for mercury determination by atomic absorption spectrometry and microwave-induced plasma spectrometry with the aid of the cold-vapor technique

A Ratiometric Fluorescence Amplification Using Copper Nanoclusters with o-Phenylenediamine Sensor for Determination of Mercury (II) in Natural Water

A simple and rapid method for determining mercury (II) has been developed using L-cysteine-capped copper nanocluster (CuNCs) with o-phenylenediamine (OPD) as the sensor. The characteristic fluorescence peak of the synthesized CuNCs was observed at 460 nm. The fluorescence properties of CuNCs were strongly influenced by the addition of mercury (II). Upon addition, CuNCs were oxidized to form Cu²⁺. Then, the OPD were rapidly oxidized by Cu²⁺ to form o-phenylenediamine oxide (oxOPD), as evidenced by the strong fluorescence peak at 547 nm, resulting in a decrease in the fluorescence intensity at 460 nm and an increase in the fluorescence intensity at 547 nm. Under optimal conditions, a calibration curve between the fluorescence ratio (I547/I460) and mercury (II) concentration was constructed with a linearity of 0-1000 µg L^-1. The limit of detection (LOD) and limit of quantification (LOQ) were found at 18.0 µg L^-1 and 62.0 µg L^-1, respectively. The recovery percentage was in the range of 96.8-106.4%. The developed method was also compared with the standard ICP-OES method. The results were found to be not significantly different at a 95% confidence level (t_stat = 0.365 < t_crit = 2.262). This demonstrated that the developed method could be applied for detecting mercury (II) in natural water samples.

Simple Acid Digestion Procedure for the Determination of Total Mercury in Plankton by Cold Vapor Atomic Fluorescence Spectroscopy

Plankton, at the bottom of the food web, play a central role in the entry of mercury into the aquatic biota. To investigate their role in mercury uptake, reliable analytical procedures for Hg analysis are highly sought. Wet digestion procedures for determining total mercury in different biological matrices have been established since years, however only few studies focused on planktonic samples. In the present work, a simple and cost-effective wet digestion method was developed for the determination of total mercury in samples of small plankton material using a cold vapor atomic fluorescence spectroscopy (CVAFS). The optimization of the digestion method was achieved by using glass vessels with Teflon caps, low amount of acids (3 mL w/w 65% HNO₃ or 3 mL 50% v/v HNO₃), a constant temperature of 85 °C, the presence and absence of pre-ultrasound treatment, and a continuous digestion period (12 h). Certified reference materials IAEA-450 (unicellular alga Scenedesmus obliquus) and BRC-414 (plankton matrix) were used to optimize and validate the digestion method. The recovery efficiency of the proposed method for IAEA-450 and BCR-414 (3.1 mg and 21.5 mg) ranged between 94.1 ± 7.6% and 97.2 ± 4.6%. The method displayed a good recovery efficiency and precision for plankton matrices of low size. Thus, allowing better digestion of planktonic samples for mercury analysis using CVAFS techniques.

Highly Sensitive and Selective Colorimetric Sensor of Mercury (II) based on Layer-by-Layer Deposition of Gold/Silver Bimetallic Nanoparticles

A new colorimetric sensor based on gold/silver bimetallic nanoparticles (Au-Ag BNPs) for the sensitive and selective detection of mercury (II) was developed. Gold nanoparticles (AuNPs) were synthesized by Turkevich method. The surface modification of AuNPs was modified by the layer-by-layer technique using poly(diallyl dimethylammonium chloride) which provided positively charged of AuNPs. Negatively charged silver nanoparticles (AgNPs) were synthesized by chemical reduction using poly(4-styrenesulfonic acid-co-maleic acid) as the stabilizing agent. The layer-by-layer assembly deposition technique was used to prepare Au-Ag BNPs of positively and negatively charged of AuNPs and AgNPs, respectively. The synthesized Au-Ag BNPs were characterized by a UV-visible spectrophotometer, zeta potential analyzer, FT-IR, TEM, XRD, and EDX. The Au-Ag BNPs sensor was able to detect mercury (II) in aqueous solution, visibly changing from brownish-orange to purple. The linear relationships of the UV-visible spectrometry demonstrate that the Au-Ag BNPs-based colorimetric sensor can be used for the quantitative analysis of mercury (II) in the range of 0.5-80 mg L^-1, with the correlation coefficient, r² = 0.9818. The limit of detection (LOD) of mercury (II) was found to be 0.526 + 0.001 mg L^-1. The BNPs is also verified to have a good practical applicability for mercury (II) detection in the real samples.

Methodology for elemental analysis of a mineral fertilizer, some of its raw materials and limestone using microwave-induced plasma optical emission spectrometry (MIP OES)

The elemental analysis of complex matrices such as superphosphate-fertilizers and agricultural inputs by means of microwave-induced plasma optical emission has been evaluated in the present study. A commercial single superphosphate-fertilizer and three certified reference materials - CRMs (multi-nutrient, phosphate rock and dolomitic limestone) were analysed. Samples were submitted for three different analyte extraction or decomposition procedures; microwave assisted digestion (MAD), extraction by heating on a metallic plate and ultrasound assisted extraction (US). Analyte recovery tests were carried out to evaluate dilutions of the obtained sample solutions to reduce or avoid matrix effects. Better results were obtained for samples submitted for MAD and the concentration values found agreed with those certified or known for the CRMs. Inductively coupled plasma optical emission spectrometry (ICP OES) was employed as an independent technique for analyte determination in the superphosphate-fertilizer submitted for MAD. The concentrations found by both techniques were in agreement with each other for most of the investigated elements. As such, MIP OES has demonstrated good performance for the determination of 19 elements.

Simultaneous analysis of Pb2+ and Cd2+ at graphene/bismuth nanocomposite film-modified pencil graphite electrode using square wave anodic stripping voltammetry

A graphene/bismuth nanocomposite film-modified pencil graphite electrode was quickly prepared for the simultaneous analysis of cadmium and lead heavy metal ions by square wave anodic stripping voltammetry. The pencil graphite electrode's surface was directly modified from graphite to graphene with cyclic voltammetry method in a single step by performing potential cycling between - 0.9 and - 1.4 V in 0.2 mol L-¹ NaOH modifying solution. A linear relationship between peak current and concentration was obtained in the range between 5-100 μg L^-1 for both Cd²⁺ and Pb²⁺, with detection limits of 0.12 μg L^-1 for Cd²⁺ and 0.29 μg L^-1 for Pb²⁺. The developed electrode with the proposed method has been applied to a Canadian-certified reference water sample and tap water sample with reliable results. For tap water sample, the obtained results were in a good agreement with the results provided by AAS. Graphical abstract.

Binding Affinity of a Highly Sensitive Au/Ag/Au/Chitosan-Graphene Oxide Sensor Based on Direct Detection of Pb2+ and Hg2+ Ions

The study of binding affinity is essential in surface plasmon resonance (SPR) sensing because it allows researchers to quantify the affinity between the analyte and immobilised ligands of an SPR sensor. In this study, we demonstrate the derivation of the binding affinity constant, K, for Pb²⁺ and Hg²⁺ ions according to their SPR response using a gold/silver/gold/chitosan-graphene oxide (Au/Ag/Au/CS-GO) sensor for the concentration range of 0.1-5 ppm. The higher affinity of Pb²⁺ to binding with the CS-GO sensor explains the outstanding sensitivity of 2.05 °ppm^-1 against 1.66 °ppm^-1 of Hg²⁺. The maximum signal-to-noise ratio (SNR) upon detection of Pb²⁺ is 1.53, and exceeds the suggested logical criterion of an SNR. The Au/Ag/Au/CS-GO SPR sensor also exhibits excellent repeatability in Pb²⁺ due to the strong bond between its functional groups and this cation. The adsorption data of Pb²⁺ and Hg²⁺ on the CS-GO sensor fits well with the Langmuir isotherm model where the affinity constant, K, of Pb²⁺ and Hg²⁺ ions is computed. The affinity of Pb²⁺ ions to the Au/Ag/Au/CS-GO sensor is significantly higher than that of Hg²⁺ based on the value of K, 7 × 10⁵ M^-1 and 4 × 10⁵ M^-1, respectively. The higher shift in SPR angles due to Pb²⁺ and Hg²⁺ compared to Cr³⁺, Cu²⁺ and Zn²⁺ ions also reveals the greater affinity of the CS-GO SPR sensor to them, thus supporting the rationale for obtaining K for these two heavy metals. This study provides a better understanding on the sensing performance of such sensors in detecting heavy metal ions.

A Highly Sensitive and Selective Catalytic Determination of Mercury in Environmental Samples

A simple, selective and highly sensitive spectrophotometric method has been developed for mercury determination utilizing its catalytic effect on the isoniazid-hexacyanoferrate (II) reaction. The paper presents for the first time (1) the catalytic effect of Hg (I) on the cited ligand substitution reactions and (2) the activating effect of thiourea on the behavior of mercury. The reaction was monitored spectrophotometrically at 423 nm using the initial rate method. The optimized reaction conditions were 5.0 mmol L(-1) hexacyanoferrate (II), 0.5 mmol L(-1) isoniazid, 150 mmol L(-1) citrate buffer (pH 3.30 ± 0.05), and 0.2 mmol L(-1) thiourea, at 50°C. Linear calibration graphs were obtained for 1-100 and 1-55 µg L(-1) with detection limits, based on the 3Sb-criterion, of 1.2 and 1.8 µg L(-1) of Hg (II) and Hg (I), respectively. The method was conveniently applied to samples of wastewaters, inactivated vaccines, and frozen Bass fish fillet, without any prior separation or preconcentration.

Recent Developments in the Speciation and Determination of Mercury Using Various Analytical Techniques

This paper reviews the speciation and determination of mercury by various analytical techniques such as atomic absorption spectrometry, voltammetry, inductively coupled plasma techniques, spectrophotometry, spectrofluorometry, high performance liquid chromatography, and gas chromatography. Approximately 126 research papers on the speciation and determination of mercury by various analytical techniques published in international journals since 2013 are reviewed.

Acid-vacuo heat treated low cost banana stems fiber for efficient biosorption of Hg(ii)

HCl treatment on Banana Stem Fiber (BSF) increased the cellulose accessibility. Prior to the biosorption process, the biosorbent was activated in vacuo at 373 K. The activation improved the maximum Hg(ii) biosorption capacity from 28 to 372 mg g⁻¹.