Multilayer graphene–gold nanoparticle hybrid substrate for the SERS determination of metronidazole

Increasing charge transfer of SERS by the combination of amorphous Al2O3–Al thin film and ZnO nanorods decorated with Ag nanoparticles for trace detection of metronidazole

In this work, we study the charge transfer improvement by the combination of two semiconductors of SERS. The energy levels of the semiconductor, when combined, become intermediate energy levels that support the charge transfer from the HOMO to the LUMO level, amplifying the Raman signal of the organic molecules. The SERS substrates of Ag/a-Al₂O₃–Al/ZnO nanorods with high sensitivity are prepared for detecting dye rhodamine 6G (R6G) and metronidazole (MNZ) standard. The highly ordered vertically grown ZnO nanorods (NRs) are first developed on a glass substrate by a wet chemical bath deposition method. Then, ZnO NRs are covered with an amorphous oxidized aluminum thin film by a vacuum thermal evaporation method to produce a platform with a large surface area and high charge transfer performance. Finally, silver nanoparticles (NPs) are decorated onto this platform to form an active SERS substrate. The structure, surface morphology, optical properties, and elements in the sample are investigated by Raman spectroscopy, X-ray diffractometry, field-emission scanning electron microscopy (FE-SEM), ultraviolet-visible spectroscopy (UV-vis), reflectance spectroscopy, and energy dispersion X-ray spectroscopy (EDS). Rhodamine 6G is used as a reagent to evaluate the SERS substrates with an analytical enhancement factor (EF) of ∼1.85 × 10¹⁰ at the limit of detection (LOD) of 10⁻¹¹ M. These SERS substrates are used to detect metronidazole standard at a LOD of 0.01 ppm and an EF of 2.2 × 10⁶. The SERS substrate exhibits high sensitivity and stability for promising wide application in chemical, biomedical, and pharmaceutical detection.

In this work, we study the charge transfer improvement by the combination of two semiconductors of SERS.

A cucurbit[7]uril-based supramolecular fluorescent probe for the detection of metronidazole with high sensitivity and strong anti-interference capacity

We propose a new method for the selective detection of the antibiotic metronidazole (MNZ) using CB[7]-JAT (cucurbit[7]uril = CB[7] and JAT = jatrorrhizine) as a fluorescent probe, which is based on the competitive reaction between MNZ and JAT for the occupancy of the CB[7] cavity. The proposed method gives a good calibration curve in the concentration range of 0.38–60 μM, and the limit of detection for MNZ is 65 ng mL−1 with those obtained by the standard curve method. Moreover, the proposed method was successfully applied for the determination of MNZ in liquid milk. Most importantly, due to the high binding affinity between CB[7] and MNZ, the proposed method shows great anti-interference capacity to accurately detect MNZ in the presence of other antibiotics.

Synergistic SERS Enhancement in GaN-Ag Hybrid System toward Label-Free and Multiplexed Detection of Antibiotics in Aqueous Solutions

Noble metal-based surface-enhanced Raman spectroscopy (SERS) has enabled the simple and efficient detection of trace-amount molecules via significant electromagnetic enhancements at hot spots. However, the small Raman cross-section of various analytes forces the use of a Raman reporter for specific surface functionalization, which is time-consuming and limited to low-molecular-weight analytes. To tackle these issues, a hybrid SERS substrate utilizing Ag as plasmonic structures and GaN as charge transfer enhancement centers is presented. By the conformal printing of Ag nanowires onto GaN nanopillars, a highly sensitive SERS substrate with excellent uniformity can be fabricated. As a result, remarkable SERS performance with a substrate enhancement factor of 1.4 × 1011 at 10 fM for rhodamine 6G molecules with minimal spot variations can be realized. Furthermore, quantification and multiplexing capabilities without surface treatments are demonstrated by detecting harmful antibiotics in aqueous solutions. This work paves the way for the development of a highly sensitive SERS substrate by constructing complex metal-semiconductor architectures.

Recent developments on gold nanostructures for surface enhanced Raman spectroscopy: Particle shape, substrates and analytical applications. A review

Surface enhanced Raman spectroscopy (SERS) is a powerful technique for sensitive analysis which is attracting great attention in the last decades. In this review, different gold nanostructures that have been exploited for SERS analysis are described, ranging from gold nanospheres to anisotropic and complex-shaped gold nanostructures, in which the presence of high aspect ratio features leads to an increment of the electromagnetic field at the surface of the nanomaterial, resulting in enhanced SERS response. In addition to the shape of the nanostructure, the interparticle nanogaps play a prominent role in the SERS efficiency. In this sense, different approaches such as nanoaggregation and formation of assemblies and ordered structures lead to the creation of the so-called hot spots. SERS measurements may be performed in solution, while usually the nanostructures are deposited building a SERS substrate, which can be created via attachment of chemically prepared gold nanostructures, as well as via top-down physical methods. Among the classical supports for creating the SERS substrates, in the last years there is a trend towards the development of flexible supports based on polymers as well as paper. Finally, some recent applications of gold nanostructures-based SERS substrates within the analytical field are discussed to spotlight the potential of this technique in real-world analytical scenarios.

A Review of Graphene-Based Surface Plasmon Resonance and Surface-Enhanced Raman Scattering Biosensors: Current Status and Future Prospects

The surface plasmon resonance (SPR) biosensor has become a powerful analytical tool for investigating biomolecular interactions. There are several methods to excite surface plasmon, such as coupling with prisms, fiber optics, grating, nanoparticles, etc. The challenge in developing this type of biosensor is to increase its sensitivity. In relation to this, graphene is one of the materials that is widely studied because of its unique properties. In several studies, this material has been proven theoretically and experimentally to increase the sensitivity of SPR. This paper discusses the current development of a graphene-based SPR biosensor for various excitation methods. The discussion begins with a discussion regarding the properties of graphene in general and its use in biosensors. Simulation and experimental results of several excitation methods are presented. Furthermore, the discussion regarding the SPR biosensor is expanded by providing a review regarding graphene-based Surface-Enhanced Raman Scattering (SERS) biosensor to provide an overview of the development of materials in the biosensor in the future.

Efficient preparation of nitrogen-doped fluorescent carbon dots for highly sensitive detection of metronidazole and live cell imaging

Herein, nitrogen-doped carbon dots (N-CDs) emitting blue fluorescence were prepared using L-tartaric acid and triethylenetetramine through a simple and quick microwave-assisted method. The synthesized N-CDs displayed excitation-dependent fluorescence behavior, and their maximum excitation and emission wavelengths were 350 and 425 nm, respectively. The obtained N-CDs, which featured excellent fluorescence properties with a high fluorescence quantum yield of 31%, were applied to detect metronidazole (MNZ), which can effectively quench the fluorescence intensity of N-CDs due to the inner filter effect. This phenomenon was used as basis to develop a label-free fluorescent method for rapid MNZ determination, with the limit of detection of 0.22 μM and corresponding linear range of 0.5-22 μM. Hence, we had established a fluorescence method for MNZ detection and applied it to detect MNZ in real samples with satisfactory results. Finally, N-CDs with superior biocompatibility were applied for cell imaging and MNZ detection by the changes in fluorescence intensity.

Rapid determination of marbofloxacin by surface-enhanced Raman spectroscopy of silver nanoparticles modified by β-cyclodextrin

A novel surface enhanced-Raman spectroscopy (SERS) assay for marbofloxacin was developed based on β-cyclodextrin-modified silver nanoparticles (β-CD-AgNPs). The marbofloxacin could interact with β-CD-AgNPs and a new assembly was formed by AgN covalent bond. This assembly was characterized by the spectra of FT-IR and UV-vis. The optimal measurement conditions were studied in detail. In 0.033 mol L^-1 HCl solution, marbofloxacin had a sensitive SERS signal at 806 cm^-1. The enhancement factor (EF) was 2.11 × 10⁷. There was a good linear correlation between the concentration of marbofloxacin and SERS intensity: the linear range was 0.003-0.03 μmol L^-1 (r² = 0.996). The limit of detection (LOD) (S/N = 3) was 1.7 nmol L^-1 (S/N = 3). Moreover, the influence of some interferences including Cu²⁺, K⁺, Zn²⁺, Ca²⁺, Na⁺, Mg²⁺, glucose and tiamulin on the determination were studied. The developed SERS method was used to detect the content of marbofloxacin in chicken and duck, the recovery was 101.3%-103.1% with RSD 4.07%-6.83%.

Analytical control of Rhodamine B by SERS using reduced graphene decorated with copper selenide

A novel approach for the decoration of reduced graphene oxide with copper selenide (CuSe-rGO), using supercritical carbon dioxide (sc-CO₂) as a medium, was developed and proposed as a new substrate for surface-enhanced Raman spectroscopy (SERS) to determine Rhodamine B in chili powder. The synthesized materials graphene oxide (GO), reduced graphene oxide (rGO) and CuSe-rGO were characterized by Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). All SERS spectra were obtained by using a portable Raman spectrometer. The procedure presented involves a simple and rapid sample pretreatment in order to determine Rhodamine B in chili powder, with a limit of quantification of 44.5 ng g^-1. The recovery values of the proposed method resulted in the 96% to 99% range, with RSD values from 2.4% to 3.0%. The developed SERS active hybrid substrate has an enhancement factor higher than those using gold or silver nanoparticles, providing a clear improvement in the sensitivity.

In Situ Synthesis, Characterization, and Catalytic Performance of Polypyrrole Polymer-Incorporated Ag2MoO4 Nanocomposite for Detection and Degradation of Environmental Pollutants and Pharmaceutical Drugs

Material combinations of semiconductor with conducting polymer are gaining growing interest due to their enhanced activities in photocatalysis as well as electrochemical sensing. In this present work, we report a facile in situ synthesis of polypyrrole (PPy) polymer-incorporated silver molybdate (Ag₂MoO₄) nanocomposite that is utilized as a photocatalyst and electrocatalyst for the degradation of pollutant heavy metals, namely, methylene blue (MB) and heavy metal (Cr(VI)), and ciprofloxacin (CIP) and for detection of the drug, azomycin. The synthesized nanocomposite was characterized by various theoretical, spectral, and microscopic studies. Matching of the powder X-ray diffraction pattern with JCPDS no. 76-1747 confirmed the formation of α-Ag₂MoO₄/PPy. The surface topography and spherical morphology of the nanocomposite were studied using field emission-scanning electron microscopy and transmission electron microscopy. Fourier transform infrared spectral detail expounds the smooth incorporation of PPy to Ag₂MoO₄. The as-synthesized nanocomposite performs as an efficient photocatalyst in the degradation of MB (99.9%), Cr(VI) (99%), and CIP drug (99.8%) within 10 min. In addition to this, the Ag₂MoO₄/PPy-modified glassy carbon electrode (GCE) demonstrated excellent electrocatalytic activity in terms of a higher cathodic peak current and lower peak potential when compared with other modified and unmodified GCEs for the detection of azomycin. The Ag₂MoO₄/PPy/GCE displayed a broader linear response range and lower detection limit of 0.5-499 μM and 65 nM, respectively. Moreover, other potentially co-interfering compounds, such as a similar functional group-containing biological substances and inorganic species, have no interference effect toward azomycin sensing.

Nanostructured hybrid surface enhancement Raman scattering substrate for the rapid determination of sulfapyridine in milk samples

The fabrication of surface-enhanced Raman spectroscopy (SERS) substrates, which can offer the advantages of strong Raman signal enhancement with good reproducibility, is still a challenge for practical applications. In this work, a simple and reproducible SERS substrate combining the properties of multi-walled carbon nanotubes (MWCNTs) and gold nanoparticles (AuNPs), is proposed for the determination and quantification of sulfapyridine in milk samples with a concentration range of 10-100 ng mL^-1. The Raman signals of sulfapyridine is enhanced at factor of 4394. The procedure presented is capable of detecting and quantifying small quantities of sulfapyridine without implying any preconcentration step, just using an affordable and portable Raman spectrometer. The precision, in terms of repeatability and inter and intermediate precision, was lower than 8% in all cases.

A portable SERS method for the determination of uric acid using a paper-based substrate and multivariate curve resolution

This paper presents a portable quantitative method for the on-site determination of uric acid in urine using surface-enhanced Raman spectroscopy (SERS) and gold nanoparticle-coated paper as a substrate. A procedure was developed for the rapid preparation of cost-effective SERS substrates that enabled the adequate control of a homogeneous active area and the use of small quantities of gold nanoparticles per substrate. The standard addition method and multivariate curve resolution-alternating least squares (MCR-ALS) were applied to compensate for the matrix effect and to address overlapping bands between uric acid and interference SERS spectra. The proposed methodology demonstrated better performance than conventional univariate methods (in terms of linearity, accuracy and precision), a wide linear range (0-3.5 mmol L(-1)) and an adequate limit of detection (0.11 mmol L(-1)). For the first time, a portable SERS method coupled with chemometrics was developed for the routine analysis of uric acid at clinically relevant concentrations with minimal sample preparation and easy extension for the on-site determination of other biomarkers in complex sample matrices.

Graphene-Gold Nanoparticles Hybrid-Synthesis, Functionalization, and Application in a Electrochemical and Surface-Enhanced Raman Scattering Biosensor

Graphene is a single-atom-thick two-dimensional carbon nanosheet with outstanding chemical, electrical, material, optical, and physical properties due to its large surface area, high electron mobility, thermal conductivity, and stability. These extraordinary features of graphene make it a key component for different applications in the biosensing and imaging arena. However, the use of graphene alone is correlated with certain limitations, such as irreversible self-agglomerations, less colloidal stability, poor reliability/repeatability, and non-specificity. The addition of gold nanostructures (AuNS) with graphene produces the graphene-AuNS hybrid nanocomposite which minimizes the limitations as well as providing additional synergistic properties, that is, higher effective surface area, catalytic activity, electrical conductivity, water solubility, and biocompatibility. This review focuses on the fundamental features of graphene, the multidimensional synthesis, and multipurpose applications of graphene-Au nanocomposites. The paper highlights the graphene-gold nanoparticle (AuNP) as the platform substrate for the fabrication of electrochemical and surface-enhanced Raman scattering (SERS)-based biosensors in diverse applications as well as SERS-directed bio-imaging, which is considered as an emerging sector for monitoring stem cell differentiation, and detection and treatment of cancer.