Tandem mass spectrometry (ICP-MS/MS) for overcoming molybdenum oxide interferences on Cd determination in milk

Pedogeochemical mobility of metals from fluorescent lamp waste and human health risk assessment

The management of fluorescent lamps wastes is a challenge, and its disposal in soils may cause harmful effects on human health and edaphic biota due to the presence of Hg and other potentially toxic metals. However, the pedogeochemical behavior of metals from fluorescent lamps is still rarely studied in the tropics. An Oxisol sample was contaminated in the laboratory using a dosage of 6.5% fluorescent lamp powder relative to the mass of soil. The mobility of metals was assessed through a sequential extraction protocol of the Community Bureau of Reference. To assess potential risks, a mathematical model of Human Health Risk Assessment was employed, based on human exposure on metal-contaminated groundwater from soil contamination. Evaluation of metal mobility showed that 6% of Ni and 30% of Cu in contaminated soil were in the potentially bioavailable fraction. The slightly acidic pH of the contaminated soil seems to influence the mobility of Ni and Cu. Zn and Pb were mainly found in the residual fraction, suggesting low geochemical availability. However, over time, metals may be leached, highlighting the importance of monitoring disposal areas. When these results are compared to the mobility profile found in extractions applied to pure fluorescent lamps waste, the data suggest that soil properties tend to reduce metal mobility. Human Health Risk Assessment showed significant risks associated with the human consumption of Cu-contaminated groundwater, considering a scenario of metal leaching from the soil. This study highlights the need for proper fluorescent lamps disposal in tropical terrestrial systems to prevent ecological and public health risks.

Application and prospect of metabolomics-related technologies in food inspection

BACKGROUND

Food inspection covers a broad range of topics, including nutrient analysis, food pollutants, food auxiliary materials, additives, and food sensory identification. The foundation of diverse subjects like food science, nutrition, health research, and the food industry, as well as the desired reference for drafting trade and food legislation, makes food inspection highly significant. Because of their high efficiency, sensitivity, and accuracy, instrumental analysis methods have gradually replaced conventional analytical methods as the primary means of food hygiene inspection.

SCOPE AND APPROACH

Metabolomics-based analysis technology, such as nuclear magnetic resonance (NMR), gas chromatography-mass spectrometry (GC-MS), liquid chromatography-mass spectrometry (LC-MS), and capillary electrophoresis-mass spectrometry (CE-MS), has become a widely used analytics platform. This research provides a bird's eye view of the application and future of metabolomics-related technologies in food inspection.

KEY FINDINGS AND CONCLUSIONS

We have provided a summary of the features and the application range of various metabolomics techniques, the strengths and weaknesses of different metabolomics platforms, and their implementation in specific inspection procedures. These procedures encompass the identification of endogenous metabolites, the detection of exogenous toxins and food additives, analysis of metabolite alterations during processing and storage, as well as the recognition of food adulteration. Despite the widespread utilization and significant contributions of metabolomics-based food inspection technologies, numerous challenges persist as the food industry advances and technology continues to improve. Thus, we anticipate addressing these potential issues in the future.

A novel signal amplification biosensor for detection of Cd2+ based on asymmetric PCR

In this work, a novel signal amplification biosensor was utilized to detect Cd²⁺ based on asymmetric PCR. In the presence of Cd²⁺, it can bind with Cd²⁺-aptamer C1 which caused the complementary strand C2 to be released from double-stranded DNA C1-C2. Because the single-stranded C1 cannot be hydrolyzed by Exo III, it can be used as a template to take part in asymmetric PCR reaction. In the absence of Cd²⁺, the C1-C2 was digested by Exo III and no PCR template was left. During the experiment, an interesting phenomenon was found that the asymmetric PCR can obtain higher level of fluorescent signal than that of symmetric PCR. To the best of our knowledge, this is the first report of using asymmetric PCR to detect Cd²⁺. Through the asymmetric PCR amplification strategy, this biosensor had a low detection limit (19.93 nM) and a wide linear range (0-500 nM). Meanwhile, this biosensor showed a satisfactory selectivity and recovery rate.

Online Solid-Phase Extraction-Inductively Coupled Plasma-Quadrupole Mass Spectrometry with Oxygen Dynamic Reaction for Quantification of Technetium-99

Quantification of pg/L levels (i.e., 0.6 mBq/L) of radioactive technetium-99 (⁹⁹Tc) was achieved within 15 min in the presence of isobaric and polyatomic interference sources such as ruthenium-99 (⁹⁹Ru) and molybdenum hydride (⁹⁸Mo¹H) at 3-11 orders of magnitude higher concentrations. Online solid-phase extraction-inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS) with oxygen (O₂) dynamic reaction cell (online SPE-ICP-MS-DRC) was shown to be a thorough automatic analytical system, circumventing the need for human handling. At three stepwise separations (SPE-DRC-Q mass filters), we showed that interference materials allowed the coexistence of abundance ratios of 1.5 × 10^-13 and 1.1 × 10^-5 for ⁹⁹Tc/Mo and ⁹⁹Tc/Ru, respectively. A classical mathematical correction using the natural isotope ratio of ⁹⁹Ru/¹⁰²Ru was used to calculate the residues of ⁹⁹Ru. Using this optimized system, a detection limit (DL; 3σ) of ⁹⁹Tc was 9.3 pg/L (= 5.9 mBq/L) for a 50 mL injection and sequential measurements were undertaken at a cycle of 24 min/sample. For the measurement of a lower concentration of ⁹⁹Tc, an AG1-X8 anion-exchange column was used to study 20 L of seawater. Its DL was approximately 1000 times greater than that of previous methods (70.0 fg/L). Thus, this method withstands coexistences of 5.8 × 10^-18 and 3.5 × 10^-9 for ⁹⁹Tc/Mo and ⁹⁹Tc/Ru, respectively. Spike and recovery tests were conducted for environmental samples; the resulting values showed good agreement with the spike applied.

Development and characterization of reference materials for trace element analysis of keratinized matrices

Biomonitoring for human exposure to lead, arsenic, mercury, and other toxic metal(loid)s often relies on analyzing traditional biospecimens such as blood and urine. While biomonitoring based on blood and urine is well-established, non-traditional biospecimens such as hair and nails can offer the potential to explore past exposures as well as the advantages of non-invasive collection and ease of storage. The present study describes the production of four reference materials (NYS RMs 18-01 through 18-04) based on caprine horn, a keratinized tissue similar to human hair and nails, intended to serve as a resource for calibration, quality control, and method validation purposes. The elemental content and homogeneity of these candidate reference materials were characterized for 17 elements using inductively coupled plasma mass spectrometry (ICP-MS). Commutability between two or more of the NYS caprine horn RMs and human nails was established for 8 elements (Ba, Ca, Cr, Cu, Mn, Pb, Sr, and Zn) based on analysis by ICP-MS/MS and ICP-optical emission spectrometry. The development and optimization of an ICP-MS/MS instrumental method for the determination of 17 elements in keratinized tissues is described. The method was validated against three certified reference materials based on human hair showing good accuracy and method repeatability better than 25% for all analytes. This study also describes sample preparation issues and addresses common challenges including surface contamination, microwave digestion, matrix effects, and spectral interferences in inorganic mass spectrometry. New York State Department of Health Keratin Matrix Reference Materials. Graphical abstract.

An Ultrasensitive Colorimetric Strategy for Detection of Cadmium Based on the Peroxidase-like Activity of G-Quadruplex-Cd(II) Specific Aptamer

We rationally designed an ultrasensitive and label-free sensing platform for determination of cadmium (Cd). The sensing platform contains G-quadruplex-Cd(II) specific aptamer (GCDSA) constructed by incorporating G-rich sequence at the end of 5' and the critical domain of the Cd-4 aptamer. GCDSA designed act as both a special recognition sequence for Cd²⁺ and a signal DNAzyme. In absence of Cd²⁺, GCDSA may mainly exist in a random coil sequence. Upon addition of Cd²⁺, GCDSA could probably be induced to fold into a G-quadruplex structure. The generation of plentiful active G-quadruplex interacts with hemin to form a peroxidase-like DNAzyme, leading to increased absorbance signal of the sensing system. ΔA was directly proportional to the two segments of concentrations for Cd²⁺, with the detection of limit of 0.15 nM. The proposed method avoids the labeled oligonucleotides and allows directly quantitative analysis of the samples by cheap instruments, with an excellent dynamic range.

A highly sensitive electrochemical sensor for Cd(II) based on protic salt derived nitrogen and sulfur co-doped porous carbon

Lately, an "all-in-one" strategy via direct pyrolysis of protic salt has attracted great attention in the preparation of hetero-doped porous carbons due to its distinctive simplicity. However, protic salt derived carbons usually process large grain sizes thus hamper their applications. Herein, a protic salt derived N, S co-doped porous carbon (N, S-PC) with improved porosity was synthesized by nanocasting and carbonization of protic salt. In the nanocasting silica sphere was used as auxiliary template and an easily obtained protic salt ([pPDA][nHSO₄]) was served as C, N and S sources. The obtained N, S-PC contains rich N, S contents and hierarchical textural porosity, thus favors the electrochemical detection of toxic cadmium ions. The N, S-PC based sensor shows excellent sensitivity and selectivity for Cd(II) versus other metals, with a low detection limit of 0.1 μg L^-1 (S/N = 3) over a wide concentration range of 4-80 μg L^-1. Applications of the N, S-PC based sensor for Cd(II) assay in tap water samples achieved results with good recoveries, indicating that the N, S-PC based electrode is promising in real sample analysis.

Inductively coupled plasma - Tandem mass spectrometry (ICP-MS/MS): A powerful and universal tool for the interference-free determination of (ultra)trace elements – A tutorial review

This paper is intended as a tutorial review on the use of inductively coupled plasma - tandem mass spectrometry (ICP-MS/MS) for the interference-free quantitative determination and isotope ratio analysis of metals and metalloids in different sample types. Attention is devoted both to the instrumentation and to some specific tools and procedures available for advanced method development. Next to the more typical reaction gases, e.g., H2, O2 and NH3, also the use of promising alternative gases, such as CH3F, is covered, and the possible reaction pathways with those reactive gases are discussed. A variety of published applications relying on the use of ICP-MS/MS are described, to illustrate the added value of tandem mass spectrometry in (ultra)trace analysis.