Non-invasive in situ analytical techniques working in synergy: The application on graduals held in the Certosa di Pavia

A Silver Monochrome “Concetto spaziale” by Lucio Fontana: A Spectroscopic Non- and Micro-Invasive Investigation of Materials

In several of his artworks, for instance the Venezie cycle, Fontana employed metallic paints; previous investigations on such materials highlighted the use of different synthetic binders and of thick paint layers below the metal one, having different colours to change the visual perception of the metallic surface. In the present work, a monochrome silver “Concetto spaziale” by the Italo–Argentine artist belonging to a private collection recently gifted to the museum of the Church of San Fedele in Milano, Italy, was investigated to deepen the knowledge of this particular group of Fontana’s paintings. The artwork was initially visually inspected in visible and ultraviolet (UV) light. Subsequently, a non-invasive spectroscopic investigation was performed by X-ray fluorescence (XRF), reflection Fourier-transform infrared (FTIR) and Raman spectroscopy. A minute fragment of silver-coloured paint was taken from the reverse of the painting, near the cut edge, and examined by scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM-EDX) and micro-Fourier-transform Raman (FT-Raman) spectroscopy. The analytical data made it possible to identify the composition of the metallic paint layer and of the underlying dark one, both from the point of view of the pigments and of the binders used, also highlighting the potential of the non-invasive and micro-invasive methods adopted in the investigation.

The combined use of SEM-EDX, Raman, ATR-FTIR and visible reflectance techniques for the characterisation of Roman wall painting pigments from Monte d'Oro area (Rome): an insight into red, yellow and pink shades

The aim of this work has been the identification of the painter's materials employed in the wall decoration of some destroyed buildings dating approximately between the first century B.C. and the first century A.D. This research originates from a previously started joined archaeological and analytical investigation concerning a varied group of findings that resulted from a rescue excavation performed by Soprintendenza Archeologica in the area of Monte d'Oro in Rome. The focus of this study progression has been directed to a numerous selection of monochrome red, pink and yellow-pigmented fragments. The analyses were performed by means of scanning electron microscopy energy dispersive X-ray spectroscopy (SEM-EDX) combined with Raman and Fourier transform infrared (FTIR) spectroscopies; visible reflectance measurements have also been carried out and the relevance of this technique in such a kind of archaeological studies has been highlighted. Most attention has been given to the assessment of the performances of non-destructive techniques achieved by portable Raman, and visible reflectance instrumentation to test their diagnostic capabilities. In addition to the expected and well-known pigments such as cinnabar, red ochre, hematite for the reds and yellow ochre for the yellows, the study highlighted a diffuse use of mixed colours and in some cases the possible presence of overlapped painted layers and confirmed the presence of gildings. Among the mixtures of pigments, the most singular outcome concerns the pink fragments revealing the possible application of bone white, which seems to be rather uncommon as a pigment in Roman wall decorations.

Pulsed thermography and infrared reflectography: comparative results for underdrawing visualization in paintings

Reflectographic analyses applied on paintings can be performed using cameras equipped with different detectors with different abilities in detecting and visualizing underdrawings, repainting, restorations, and other nonvisible information. In this research, the results obtained through thermographic imaging followed by statistical imaging postprocessing methods have been compared with those obtained with traditional reflectographic methods in the short-wave infrared range. The comparison has been performed studying the thermal sequence after a single pulse of light with a different spectrum of ad hoc mock-ups. Results showed that for limited cases, signal-to-noise ratio seems to be more relevant in obtaining reliable images of underdrawings with respect to the effect of optical absorption of visible light by painting layers.

FUXYA2020: A Low-Cost Homemade Portable EDXRF Spectrometer for Cultural Heritage Applications

The project FUXYA2020 was intended to design and prototype a low-cost basic energy dispersive X-ray fluorescence spectrometer for all those cases where there is not enough financial support to buy a commercial device. Indeed, home-made instruments are ideal when funds are low but constant over the years, as this approach allows the costs to be spread over a longer period of time. The FUXYA2020 was intended mostly for cultural heritage (CH) applications: we optimized the geometry to meet the requirements for both low Z matrix objects, such as glasses and ceramics, and medium-high Z materials, such as metals; besides, we designed a positioning system through Arduino components to obtain good results and repeatability for samples with a complex geometry. The FUXYA2020’s performance was tested both for qualitative and quantitative analyses, the former on pigment layers, and the latter on gold-based certified alloys, exploiting Axil-QXAS software for data elaboration. The classification of ancient ceramics based on multivariate analysis obtained through R environment was also carried out. The qualitative data on pigments have also been compared with the same data obtained by a commercial XRF spectrometer, demonstrating how our very simple and inexpensive prototype can be of great help for a rapid and reliable characterization of cultural heritage materials whenever commercial devices are unaffordable.

Pigments on Roman Wall Painting and Stucco Fragments from the Monte d’Oro Area (Rome): A Multi-Technique Approach

This work concerns the characterisation of a set of wall painting and stucco fragments collected during a rescue excavation carried out in 2013 by the Soprintendenza Archeologica in the Monte d’Oro area (Rome). Due to the contextless archaeological situation, analyses were performed to obtain more information about the collected materials. A multi-analytical approach has been applied including spectroscopic (FTIR, Raman and visible reflectance analyses) and elemental analysis (SEM-EDS) techniques. The chromatic palette has been in this way disclosed evidencing the use of pigments such as cinnabar, Egyptian blue, red and yellow ochre and green earth, but also the simultaneous use of them. The presence of a decoration achieved by using a gold leaf has been highlighted also, indicating the preciousness of the decorations. The convenience and advantages linked to the use of portable instrumentation have been also evidenced.

Looking for Common Fingerprints in Leonardo's Pupils Using Nondestructive Pigment Characterization

Non-invasive, portable analytical techniques are becoming increasingly widespread for the study and conservation in the field of cultural heritage, proving that a good data handling, supported by a deep knowledge of the techniques themselves, and the right synergy can give surprisingly substantial results when using portable but reliable instrumentation. In this work, pigment characterization was carried out on 21 Leonardesque paintings applying in situ X-ray fluorescence (XRF) and fiber optic reflection spectroscopy (FORS) analyses. In-depth data evaluation allowed to get information on the color palette and the painting technique of the different artists and workshops . Particular attention was paid to green pigments (for which a deeper study of possible pigments and alterations was performed with FORS analyses), flesh tones (for which a comparison with available data from cross-sections was made), and ground preparation.