Application of central composite design for methyl red dispersive solid phase extraction based on silver nanocomposite hydrogel: Microwave assisted synthesis

Nanoparticle Assisted Fabric Phase Sorptive Extraction for Azo Dye Determination in the Industrial Sewage

Currently, one of the significant environmental problems is the presence of azo dye materials in water sources. In this study, for the first time, a fast and sensitive sample preparation approach using nanoparticle-assisted fabric phase sorptive extraction (NFPSE) followed by high-performance liquid chromatography was examined to remove some azo dyes such as methyl red and sunset yellow from aqueous solutions. Primarily, the significance of several parameters affecting NFPSE, such as fabric type, the kind of sorbent, the number of contacts with sol-gel and the time of contact, was investigated. In addition, experiments were performed to determine the effect of different adsorption parameters, such as sample volume, adsorption time, adsorbent value, desorption time, ionic strength and pH. It was found that the calibration curve was linear within two ranges of concentrations (0.05-0.1 and 0.5-15 ng/L for methyl red; 0.05-0.5 and 0.5-15 ng/L for sunset yellow) with correlation coefficients better than 0.9683. The limit of detection was 0.014 ng/L for methyl red and 0.015 ng/L for sunset yellow. Repeatability Relative Standard Deviation (RSD) with three replicated experiments was 1.5-10% for methyl red and 2.5-5.8% for sunset yellow. Relative recovery percentages of 88-96% for methyl red and 62-92% for sunset yellow were obtained in the samples. Moreover, the results have shown that acceptable accuracy, precision and linearity make the "fabric phase sorptive extraction" a proper method for the determination of dyes from industrial sewage samples.

Combination of smartphone digital image colorimetry and UV-Vis spectrophotometry as detection systems with solidified floating organic drop microextraction as preconcentration method for the quantification of methyl red in wastewater samples

In this study, a portable smartphone-based digital image colorimetric system (SDIC) was designed and integrated with a solidified floating organic drop microextraction method (SFODME) for the quantification of methyl red in textile wastewater samples. The RGB (red, green, and blue) data were evaluated for each captured image, and the green channel was selected for quantification due to its linear response for the analyte. Under optimal conditions, an acceptable linear range was recorded for the analyte. The proposed method recorded a limit of detection (LOD) value of 0.046 mg/L. The developed microextraction method was also combined with UV-Vis spectrophotometry, which recorded an LOD value of 0.012 mg/L. Real sample analysis was carried out with textile wastewater samples to check the applicability/accuracy of the developed method, using a matrix matching calibration strategy to enhance quantification accuracy. Satisfactory percent recoveries in the range of 93.3%-114.3% and 92%-92.7% were recorded for the SFODME-SDIC and SFODME-UV methods, respectively.

Composite hydrogel based on alginate-g-poly(acrylamide)/carbon nanotubes for solid phase extraction of metals from corn cereal samples

Composite hydrogels containing nanofillers are extensively applied in the sorption of different compounds from aqueous solutions; however, this ability is poorly exploited in the extraction and pre-concentration of analytes from complex matrices. As a contribution to this field, this study reports the synthesis of a composite hydrogel of alginate-g-poly(acrylamide) matrix filled with functionalized multi-walled carbon nanotubes (ALG-g-PAAM/MWCNT-f). This composite served as a solid-phase extractor (SPE) for the separation of Pb²⁺ and Cd²⁺ ions from a digested corn cereal sample before their analytical determination. After composite characterization, a series of experiments using low dosages of ALG-g-PAAM/MWCNT-f demonstrated that the composite has a higher sorption capacity for Pb²⁺ (5.1 mg/g) and Cd²⁺ (3.9 mg/g) under favorable experimental conditions. As demonstrated, the presence of the MWCNT-f benefited the SPE performance of the composite. The sorption of both cations followed the pseudo-first order kinetics, while the experimental data were well-fitted by the Freundlich isotherm. Also, ALG-g-PAAM/MWCNT-f showed selectivity for Pb²⁺, and it is reusable up to 10 times without losing sorption performance. After sorption and extraction, both metals were completely recovered, facilitating their quantification by the MIP OES technique. In short, ALG-g-PAAM/MWCNT-f was an effective SPE for the separation and extraction of Pb²⁺ and Cd²⁺, which can be beneficial for food control and safety.

Optimization of Microwave Pre-Cooked Conditions for Gelatinization of Adzuki Bean

Pre-cooked adzuki beans (Vigna angularis), which looks like dried adzuki bean, is easily cooked and preserved. This study aimed to optimize the microwave pre-cooked conditions on adzuki beans by applying the response surface methodology. The results showed that soaking time has a significant effect on the gelatinization degree of adzuki beans according to microwave time. The most suitable gelatinization and the sensory scores were obtained with a soaking time of 7.8 h, a microwave power of 830 W, and microwave time of 92 s. The pre-cooked treatment had no significant effect (p > 0.05) on the protein, free amino acid, fat and starch content of adzuki bean products. The results of SEM and polarized light microscopy showed that the surface and center of starch were damaged after microwave treatment. XRD showed that microwave pre-cooking did not change the crystal structure of starch and maintained the original order of type A structure while reducing the relative starch crystallinity. FT-IR showed that the pre-cooked treatment did not produce new structure in adzuki bean starch, but the ratio of 1047/1022 cm^-1 was slightly decreased, indicating that the starch crystallization area decreased relative to the amorphous area and the relative crystallinity decreased. The results of FTIR were consistent with X-ray diffraction results. Therefore, microwaves improved the gelatinization of adzuki beans and made the pre-cooked adzuki beans more suitable.

Evaluation of Polyvinyl Alcohol/Pectin-Based Hydrogel Disks as Extraction Phase for Determination of Steroidal Hormones in Aqueous Samples by GC-MS/MS

A new extraction phase based on hydrogel disks of polyvinyl alcohol (PVOH) and pectin was proposed, characterized and evaluated for the extraction of six steroidal hormones (estriol, estrone, 17β-estradiol, 17α-ethinylestradiol, progesterone, and testosterone) in aqueous samples with subsequent determination by gas chromatography-tandem mass spectrometry (GC-MS/MS) after the derivatization procedure. The developed extraction procedure was based on the solid phase extraction (SPE) technique, but employed hydrogel as the sorbent phase. The effects of several parameters, including the amount and composition of the sorbent phase, pH, sample volume, flow rate, and gel swelling over the extraction efficiency, were evaluated. Gels with lower swelling indexes and larger amounts of sorbent ensured higher extraction yields of analytes. The main benefits of using the PVOH/pectin-based hydrogel as the extraction phase are the ease of synthesis, low-cost preparation, and the possibility of reusing the extraction disks. Limits of quantification of 0.5 μg L-1 for estrone and 17β-estradiol, and 1 μg L-1 for testosterone, 17α-ethinylestradiol, progesterone, and estriol were obtained. Accuracy values ranged from 80% to 110%, while the inter-assay precision ranged from 0.23% to 22.2% and the intra-assay from 0.55% to 12.3%. Since the sorbent phase has an amphiphilic character, the use of hydrogels is promising for the extraction of medium-to-high polarity compounds.

Application of Box-Behnken design in response surface methodology for the molecularly imprinted polymer pipette-tip solid phase extraction of methyl red from seawater samples and its determination by spectrophotometery

In this paper, a rapid, selective and effective technique, pipette-tip solid phase extraction based on molecularly imprinted polymer, was used for extraction and pre-concentration of methyl red (MR) prior to its determination by spectrophotometer. Variables influencing extraction efficiency including type and volume of eluent solvent, sample volume, number of cycles of extraction and elution, amount of sorbent and pH of the sample solution were optimized with two methods of one-variable-at-a-time and response surface methodology (RSM). For RSM optimization, seven factors in three-levels were utilized for Box-Behnken experimental design. Under optimum conditions, a linear calibration graph in the range of 3.0-300.0 μg L^-1 for MR was resulted. The limit of detection of proposed method was 0.50 μg L^-1 for MR. Finally, the investigated method was used for the determination of MR in seawater and the mean recoveries were calculated to be 84.0-98.0% with mean RSD of 2.5-6.7%.

Ultrasound wave assisted adsorption of congo red using gold-magnetic nanocomposite loaded on activated carbon: Optimization of process parameters

In this study, gold-magnetic nanocomposite in the presence of ultrasound wave assisted was synthesized and loaded on activated carbon (Au-Fe₃O₄-NCs-AC) by simple, fast and low-cost process. This novel material was applied for ultrasound assisted adsorption of congo red (CR) as model of toxic and even carcinogenic substance from aqueous solution. The detail of morphology and identity of Au-Fe₃O₄-AC was characterized by SEM and TEM techniques and correlation among response to variables such as pH (2-10), adsorbent mass (0.005-0.025 g), initial CR concentration (10-30 mg L^-1) and ultrasound time (2-6 min) was investigated by response surface methodology (RSM) under central composite design (CCD). Analysis of variance (ANOVA) exhibit a high R² value of 0.999 and confirm suitability of constructed second-order regression model for excellent evaluation and prediction of the experimental data. The interaction and main factor and optimum conditions of the under study process were determined from response surface plots based on desirability function. The maximum CR adsorption were achieved at pH of 4, 15 mg L^-1 of CR, 0.017 g of Au-Fe₃O₄-AC and 5 min sonication which owing to 99.49% removal efficiency is highly recommended for future CR removal from different matrixes. Adsorption kinetic follow second-order rate expression in combination to inter particle diffusion and equilibrium adsorption data best represented by the Langmuir isotherm with maximum mono-layer adsorption capacity of 43.88 mg g^-1.